diff options
Diffstat (limited to 'nuttx/configs/lpcxpresso-lpc1768/ostest')
-rwxr-xr-x | nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig | 84 |
1 files changed, 42 insertions, 42 deletions
diff --git a/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig b/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig index 0975342d9..9dfaf4c5e 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig +++ b/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig @@ -664,40 +664,40 @@ CONFIG_USBSER_TXBUFSIZE=512 # # USB Storage Device Configuration # -# CONFIG_USBSTRG +# CONFIG_USBMSC # Enable compilation of the USB storage driver -# CONFIG_USBSTRG_EP0MAXPACKET +# CONFIG_USBMSC_EP0MAXPACKET # Max packet size for endpoint 0 -# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN +# CONFIG_USBMSC_EPBULKOUT and CONFIG_USBMSC_EPBULKIN # The logical 7-bit address of a hardware endpoints that support # bulk OUT and IN operations -# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS +# CONFIG_USBMSC_NWRREQS and CONFIG_USBMSC_NRDREQS # The number of write/read requests that can be in flight -# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN +# CONFIG_USBMSC_BULKINREQLEN and CONFIG_USBMSC_BULKOUTREQLEN # The size of the buffer in each write/read request. This # value needs to be at least as large as the endpoint # maxpacket and ideally as large as a block device sector. -# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR +# CONFIG_USBMSC_VENDORID and CONFIG_USBMSC_VENDORSTR # The vendor ID code/string -# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR +# CONFIG_USBMSC_PRODUCTID and CONFIG_USBMSC_PRODUCTSTR # The product ID code/string -# CONFIG_USBSTRG_REMOVABLE +# CONFIG_USBMSC_REMOVABLE # Select if the media is removable # -CONFIG_USBSTRG=n -CONFIG_USBSTRG_EP0MAXPACKET=64 -CONFIG_USBSTRG_EPBULKOUT=2 -CONFIG_USBSTRG_EPBULKIN=5 -CONFIG_USBSTRG_NRDREQS=2 -CONFIG_USBSTRG_NWRREQS=2 -CONFIG_USBSTRG_BULKINREQLEN=256 -CONFIG_USBSTRG_BULKOUTREQLEN=256 -CONFIG_USBSTRG_VENDORID=0x584e -CONFIG_USBSTRG_VENDORSTR="NuttX" -CONFIG_USBSTRG_PRODUCTID=0x5342 -CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage" -CONFIG_USBSTRG_VERSIONNO=0x0399 -CONFIG_USBSTRG_REMOVABLE=y +CONFIG_USBMSC=n +CONFIG_USBMSC_EP0MAXPACKET=64 +CONFIG_USBMSC_EPBULKOUT=2 +CONFIG_USBMSC_EPBULKIN=5 +CONFIG_USBMSC_NRDREQS=2 +CONFIG_USBMSC_NWRREQS=2 +CONFIG_USBMSC_BULKINREQLEN=256 +CONFIG_USBMSC_BULKOUTREQLEN=256 +CONFIG_USBMSC_VENDORID=0x584e +CONFIG_USBMSC_VENDORSTR="NuttX" +CONFIG_USBMSC_PRODUCTID=0x5342 +CONFIG_USBMSC_PRODUCTSTR="USBdev Storage" +CONFIG_USBMSC_VERSIONNO=0x0399 +CONFIG_USBMSC_REMOVABLE=y # # Settings for examples/uip @@ -831,46 +831,46 @@ CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n # # Settings for examples/usbstorage # -# CONFIG_EXAMPLES_USBSTRG_NLUNS +# CONFIG_EXAMPLES_USBMSC_NLUNS # Defines the number of logical units (LUNs) exported by the USB storage # driver. Each LUN corresponds to one exported block driver (or partition # of a block driver). May be 1, 2, or 3. Default is 1. -# CONFIG_EXAMPLES_USBSTRG_DEVMINOR1 +# CONFIG_EXAMPLES_USBMSC_DEVMINOR1 # The minor device number of the block driver for the first LUN. For # example, N in /dev/mmcsdN. Used for registering the block driver. Default # is zero. -# CONFIG_EXAMPLES_USBSTRG_DEVPATH1 +# CONFIG_EXAMPLES_USBMSC_DEVPATH1 # The full path to the registered block driver. Default is "/dev/mmcsd0" -# CONFIG_EXAMPLES_USBSTRG_DEVMINOR2 and CONFIG_EXAMPLES_USBSTRG_DEVPATH2 -# Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS +# CONFIG_EXAMPLES_USBMSC_DEVMINOR2 and CONFIG_EXAMPLES_USBMSC_DEVPATH2 +# Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBMSC_NLUNS # is 2 or 3. No defaults. -# CONFIG_EXAMPLES_USBSTRG_DEVMINOR3 and CONFIG_EXAMPLES_USBSTRG_DEVPATH3 -# Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS +# CONFIG_EXAMPLES_USBMSC_DEVMINOR3 and CONFIG_EXAMPLES_USBMSC_DEVPATH3 +# Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBMSC_NLUNS # is 3. No defaults. # # If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB), then # the example code will also manage the USB trace output. The amount of trace output # can be controlled using: # -# CONFIG_EXAMPLES_USBSTRG_TRACEINIT +# CONFIG_EXAMPLES_USBMSC_TRACEINIT # Show initialization events -# CONFIG_EXAMPLES_USBSTRG_TRACECLASS +# CONFIG_EXAMPLES_USBMSC_TRACECLASS # Show class driver events -# CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS +# CONFIG_EXAMPLES_USBMSC_TRACETRANSFERS # Show data transfer events -# CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER +# CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER # Show controller events -# CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS +# CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS # Show interrupt-related events. # -CONFIG_EXAMPLES_USBSTRG_NLUNS=1 -CONFIG_EXAMPLES_USBSTRG_DEVMINOR1=0 -CONFIG_EXAMPLES_USBSTRG_DEVPATH1="/dev/mmcsd0" -CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n -CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n -CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n -CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n -CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n +CONFIG_EXAMPLES_USBMSC_NLUNS=1 +CONFIG_EXAMPLES_USBMSC_DEVMINOR1=0 +CONFIG_EXAMPLES_USBMSC_DEVPATH1="/dev/mmcsd0" +CONFIG_EXAMPLES_USBMSC_TRACEINIT=n +CONFIG_EXAMPLES_USBMSC_TRACECLASS=n +CONFIG_EXAMPLES_USBMSC_TRACETRANSFERS=n +CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER=n +CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS=n # # Stack and heap information |