diff options
Diffstat (limited to 'nuttx/configs/lpcxpresso-lpc1768')
7 files changed, 0 insertions, 16 deletions
diff --git a/nuttx/configs/lpcxpresso-lpc1768/README.txt b/nuttx/configs/lpcxpresso-lpc1768/README.txt index 5632d0e82..402d52881 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/README.txt +++ b/nuttx/configs/lpcxpresso-lpc1768/README.txt @@ -568,10 +568,6 @@ LPCXpresso Configuration Options CONFIG_DRAM_START=0x10000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/lpcxpresso-lpc1768/dhcpd/defconfig b/nuttx/configs/lpcxpresso-lpc1768/dhcpd/defconfig index ce4f45162..564d7c796 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/dhcpd/defconfig +++ b/nuttx/configs/lpcxpresso-lpc1768/dhcpd/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPCXPRESSO=y CONFIG_BOARD_LOOPSPERMSEC=8079 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lpcxpresso-lpc1768/nsh/defconfig b/nuttx/configs/lpcxpresso-lpc1768/nsh/defconfig index 18d1f5c73..e1376f7bc 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/nsh/defconfig +++ b/nuttx/configs/lpcxpresso-lpc1768/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPCXPRESSO=y CONFIG_BOARD_LOOPSPERMSEC=8079 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lpcxpresso-lpc1768/nx/defconfig b/nuttx/configs/lpcxpresso-lpc1768/nx/defconfig index a9415d3db..07851a628 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/nx/defconfig +++ b/nuttx/configs/lpcxpresso-lpc1768/nx/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPCXPRESSO=y CONFIG_BOARD_LOOPSPERMSEC=8079 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig b/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig index 9dacfef1c..027cdc0db 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig +++ b/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPCXPRESSO=y CONFIG_BOARD_LOOPSPERMSEC=8079 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lpcxpresso-lpc1768/thttpd/defconfig b/nuttx/configs/lpcxpresso-lpc1768/thttpd/defconfig index 081310a2b..76b0d9781 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/thttpd/defconfig +++ b/nuttx/configs/lpcxpresso-lpc1768/thttpd/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPCXPRESSO=y CONFIG_BOARD_LOOPSPERMSEC=8079 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lpcxpresso-lpc1768/usbstorage/defconfig b/nuttx/configs/lpcxpresso-lpc1768/usbstorage/defconfig index 344dde798..ffc2a276f 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/usbstorage/defconfig +++ b/nuttx/configs/lpcxpresso-lpc1768/usbstorage/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPCXPRESSO=y CONFIG_BOARD_LOOPSPERMSEC=8079 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y |