diff options
Diffstat (limited to 'nuttx/configs/mbed/README.txt')
| -rwxr-xr-x | nuttx/configs/mbed/README.txt | 20 |
1 files changed, 20 insertions, 0 deletions
diff --git a/nuttx/configs/mbed/README.txt b/nuttx/configs/mbed/README.txt index 429dea7a6..ac9047f62 100755 --- a/nuttx/configs/mbed/README.txt +++ b/nuttx/configs/mbed/README.txt @@ -283,6 +283,26 @@ mbed Configuration Options CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
CONFIG_UARTn_2STOP - Two stop bits
+ LPC17xx specific PHY/Ethernet device driver settings. These setting
+ also require CONFIG_NET and CONFIG_LPC17_ETHERNET.
+
+ CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY
+ CONFIG_PHY_AUTONEG - Enable auto-negotion
+ CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
+ CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
+
+ CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18
+ CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18
+ CONFIG_NET_PRIORITY - Ethernet interrupt priority. The is default is
+ the higest priority.
+ CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented).
+ CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs
+ CONFIG_DEBUG.
+ CONFIG_NET_BROADCAST - Enable receipt of broadcast frames
+ CONFIG_NET_HASH - Enable receipt of near-perfect match frames.
+ CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames.
+ Automatically set if CONFIG_NET_IGMP is selected.
+
LPC17xx USB Configuration
CONFIG_LPC17_USBDEV_FRAME_INTERRUPT
|