diff options
Diffstat (limited to 'nuttx/configs/mcu123-lpc214x/ostest')
-rw-r--r-- | nuttx/configs/mcu123-lpc214x/ostest/Make.defs | 135 | ||||
-rw-r--r-- | nuttx/configs/mcu123-lpc214x/ostest/appconfig | 39 | ||||
-rw-r--r-- | nuttx/configs/mcu123-lpc214x/ostest/defconfig | 341 | ||||
-rwxr-xr-x | nuttx/configs/mcu123-lpc214x/ostest/setenv.sh | 47 |
4 files changed, 0 insertions, 562 deletions
diff --git a/nuttx/configs/mcu123-lpc214x/ostest/Make.defs b/nuttx/configs/mcu123-lpc214x/ostest/Make.defs deleted file mode 100644 index 52e176ad4..000000000 --- a/nuttx/configs/mcu123-lpc214x/ostest/Make.defs +++ /dev/null @@ -1,135 +0,0 @@ -############################################################################## -# configs/mcu123-lpc214x/ostest/Make.defs -# -# Copyright (C) 2007-2009, 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################## - -include ${TOPDIR}/.config -include ${TOPDIR}/tools/Config.mk - -# The default value for CROSSDEV can be overridden from the make command line: -# make -- Will build for the NuttX buildroot toolchain -# make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain -# make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain -# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain - -CROSSDEV = arm-nuttx-elf- -CC = $(CROSSDEV)gcc -CXX = $(CROSSDEV)g++ -CPP = $(CROSSDEV)gcc -E -LD = $(CROSSDEV)ld -AR = $(CROSSDEV)ar rcs -NM = $(CROSSDEV)nm -OBJCOPY = $(CROSSDEV)objcopy -OBJDUMP = $(CROSSDEV)objdump - -HOSTOS = ${shell uname -o 2>/dev/null || echo "Other"} - -ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} -ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} - -ifeq ($(ARCHCCMAJOR),4) -ifneq ($(HOSTOS),Cygwin) -OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment -endif -endif - -ifeq ($(CROSSDEV),arm-nuttx-elf-) - MKDEP = $(TOPDIR)/tools/mkdeps.sh - ARCHINCLUDES = -I. -isystem $(TOPDIR)/include - ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script - MAXOPTIMIZATION = -Os -else - WINTOOL = y - DIRLINK = $(TOPDIR)/tools/copydir.sh - DIRUNLINK = $(TOPDIR)/tools/unlink.sh - MKDEP = $(TOPDIR)/tools/mknulldeps.sh - ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" - ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" - MAXOPTIMIZATION = -O2 -endif - -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - ARCHOPTIMIZATION = -g -endif - -ifneq ($(CONFIG_DEBUG_NOOPT),y) - ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer -endif - -ifeq ($(ARCHCCMAJOR),4) - ARCHCPUFLAGS = -mcpu=arm7tdmi -mfloat-abi=soft -else - ARCHCPUFLAGS = -mapcs-32 -mcpu=arm7tdmi -msoft-float -endif - -ARCHCFLAGS = -fno-builtin -ARCHCXXFLAGS = -fno-builtin -fno-exceptions -ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 -ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -ARCHWARNINGSXX = -Wall -Wshadow -ARCHDEFINES = - -CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ - $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) -CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \ - $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) -CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -AFLAGS = $(CFLAGS) -D__ASSEMBLY__ - -NXFLATLDFLAGS1 = -r -d -warn-common -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) \ - -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld \ - -no-check-sections -LDNXFLATFLAGS = -e main -s 2048 - -OBJEXT = .o -LIBEXT = .a -EXEEXT = - -ifneq ($(CROSSDEV),arm-nuttx-elf-) - LDFLAGS += -nostartfiles -nodefaultlibs -endif -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - LDFLAGS += -g -endif - - -HOSTCC = gcc -HOSTINCLUDES = -I. -HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe -HOSTLDFLAGS = - diff --git a/nuttx/configs/mcu123-lpc214x/ostest/appconfig b/nuttx/configs/mcu123-lpc214x/ostest/appconfig deleted file mode 100644 index 33846aafb..000000000 --- a/nuttx/configs/mcu123-lpc214x/ostest/appconfig +++ /dev/null @@ -1,39 +0,0 @@ -############################################################################ -# configs/mcu123-lpc214x/ostest/appconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/ostest - diff --git a/nuttx/configs/mcu123-lpc214x/ostest/defconfig b/nuttx/configs/mcu123-lpc214x/ostest/defconfig deleted file mode 100644 index 86fe46295..000000000 --- a/nuttx/configs/mcu123-lpc214x/ostest/defconfig +++ /dev/null @@ -1,341 +0,0 @@ -############################################################################ -# configs/mcu123-lpc214x/ostest/defconfig -# -# Copyright (C) 2007-2010, 2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# Architecture selection -# -CONFIG_ARCH="arm" -CONFIG_ARCH_ARM=y -CONFIG_ARCH_ARM7TDMI=y -CONFIG_ARCH_CHIP="lpc214x" -CONFIG_ARCH_CHIP_LPC2148=y -CONFIG_ARCH_BOARD="mcu123-lpc214x" -CONFIG_ARCH_BOARD_MCU123=y -CONFIG_BOARD_LOOPSPERMSEC=3270 -CONFIG_ARCH_LEDS=y -CONFIG_RAM_SIZE=32768 -CONFIG_RAM_START=0x40000000 -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_STACKDUMP=y - -# -# LPC2148 specific chip initialization -# -CONFIG_EXTMEM_MODE=n -CONFIG_RAM_MODE=n -CONFIG_CODE_BASE=0x00000000 -CONFIG_PLL_SETUP=y -CONFIG_MAM_SETUP=y -CONFIG_APBDIV_SETUP=y -CONFIG_EMC_SETUP=n -CONFIG_BCFG0_SETUP=n -CONFIG_BCFG1_SETUP=n -CONFIG_BCFG2_SETUP=n -CONFIG_BCFG3_SETUP=n -CONFIG_ADC_SETUP=y - -# -# LPC214X specific device driver settings -# -CONFIG_UART0_SERIAL_CONSOLE=y -CONFIG_UART1_SERIAL_CONSOLE=n -CONFIG_UART0_TXBUFSIZE=256 -CONFIG_UART1_TXBUFSIZE=256 -CONFIG_UART0_RXBUFSIZE=256 -CONFIG_UART1_RXBUFSIZE=256 -CONFIG_UART0_BAUD=38400 -CONFIG_UART1_BAUD=38400 -CONFIG_UART0_BITS=8 -CONFIG_UART1_BITS=8 -CONFIG_UART0_PARITY=0 -CONFIG_UART1_PARITY=0 -CONFIG_UART0_2STOP=0 -CONFIG_UART1_2STOP=0 - -# -# General build options -# -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=n -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=y - -# -# General OS setup -# -CONFIG_USER_ENTRYPOINT="ostest_main" -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_MM_REGIONS=1 -CONFIG_ARCH_LOWPUTC=y -CONFIG_RR_INTERVAL=0 -CONFIG_SCHED_INSTRUMENTATION=n -CONFIG_TASK_NAME_SIZE=0 -CONFIG_START_YEAR=2008 -CONFIG_START_MONTH=10 -CONFIG_START_DAY=1 -CONFIG_JULIAN_TIME=n -CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=y -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n -CONFIG_SDCLONE_DISABLE=y -CONFIG_NXFLAT=n - -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=y -CONFIG_DISABLE_ENVIRON=y -CONFIG_DISABLE_POLL=y - -# -# Misc libc settings -# -CONFIG_NOPRINTF_FIELDWIDTH=n - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve system performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n - -# -# Sizes of configurable things (0 disables) -# -CONFIG_MAX_TASKS=16 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=4 -CONFIG_NFILE_DESCRIPTORS=8 -CONFIG_NFILE_STREAMS=8 -CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=64 -CONFIG_NUNGET_CHARS=2 -CONFIG_PREALLOC_MQ_MSGS=4 -CONFIG_MQ_MAXMSGSIZE=32 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=4 -CONFIG_PREALLOC_TIMERS=4 - -# -# Filesystem configuration -# -CONFIG_FS_FAT=n -CONFIG_FAT_LCNAMES=y -CONFIG_FAT_LFN=y -CONFIG_FAT_MAXFNAME=32 -CONFIG_FS_NXFFS=n -CONFIG_FS_ROMFS=n - -# -# Maintain legacy build behavior (revisit) -# - -CONFIG_MMCSD=y -CONFIG_MMCSD_SPI=y -CONFIG_MTD=y - -# -# SPI-based MMC/SD driver -# -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -#CONFIG_MMCSD_SPICLOCK=20000000 - -# -# TCP/IP and UDP support via uIP -# -CONFIG_NET=n -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=0 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 -CONFIG_NET_TCP=n -CONFIG_NET_TCP_CONNS=40 -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=n -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=n -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n - -# -# UIP Network Utilities -# -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 - -# -# USB Device Configuration -# -CONFIG_USBDEV=n -CONFIG_USBDEV_ISOCHRONOUS=n -CONFIG_USBDEV_DUALSPEED=n -CONFIG_USBDEV_SELFPOWERED=y -CONFIG_USBDEV_REMOTEWAKEUP=n -CONFIG_USBDEV_MAXPOWER=100 -CONFIG_USBDEV_TRACE=n -CONFIG_USBDEV_TRACE_NRECORDS=128 - -# -# LPC214X USB Configuration -# -CONFIG_LPC214X_USBDEV_FRAME_INTERRUPT=n -CONFIG_LPC214X_USBDEV_EPFAST_INTERRUPT=n -CONFIG_LPC214X_USBDEV_DMA=n -CONFIG_LPC214X_USBDEV_NDMADESCRIPTORS=0 -CONFIG_LPC214X_USBDEV_DMAINTMASK=0 - -# -# USB Serial Device Configuration -# -CONFIG_PL2303=n -CONFIG_PL2303_EPINTIN=1 -CONFIG_PL2303_EPBULKOUT=2 -CONFIG_PL2303_EPBULKIN=5 -CONFIG_PL2303_NWRREQS=4 -CONFIG_PL2303_NRDREQS=4 -CONFIG_PL2303_VENDORID=0x067b -CONFIG_PL2303_PRODUCTID=0x2303 -CONFIG_PL2303_VENDORSTR="Nuttx" -CONFIG_PL2303_PRODUCTSTR="USBdev Serial" -CONFIG_PL2303_RXBUFSIZE=512 -CONFIG_PL2303_TXBUFSIZE=512 - -# -# USB Storage Device Configuration -# -CONFIG_USBMSC=n -CONFIG_USBMSC_EP0MAXPACKET=64 -CONFIG_USBMSC_EPBULKOUT=2 -CONFIG_USBMSC_EPBULKIN=5 -CONFIG_USBMSC_NRDREQS=2 -CONFIG_USBMSC_NWRREQS=2 -CONFIG_USBMSC_BULKINREQLEN=256 -CONFIG_USBMSC_BULKOUTREQLEN=256 -CONFIG_USBMSC_VENDORID=0x584e -CONFIG_USBMSC_VENDORSTR="NuttX" -CONFIG_USBMSC_PRODUCTID=0x5342 -CONFIG_USBMSC_PRODUCTSTR="USBdev Storage" -CONFIG_USBMSC_VERSIONNO=0x0399 -CONFIG_USBMSC_REMOVABLE=y - -# -# Settings for examples/ostest -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=4096 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 - -# -# Settings for apps/nshlib -# -CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_ARCHINIT=n -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=0x0a000002 -CONFIG_NSH_DRIPADDR=0x0a000001 -CONFIG_NSH_NETMASK=0xffffff00 -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT="/tmp" - -# -# Architecture-specific NSH options -CONFIG_NSH_MMCSDSPIPORTNO=1 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 - -# -# Stack and heap information -# -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_IDLETHREAD_STACKSIZE=2048 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 diff --git a/nuttx/configs/mcu123-lpc214x/ostest/setenv.sh b/nuttx/configs/mcu123-lpc214x/ostest/setenv.sh deleted file mode 100755 index e71f10f88..000000000 --- a/nuttx/configs/mcu123-lpc214x/ostest/setenv.sh +++ /dev/null @@ -1,47 +0,0 @@ -#!/bin/bash -# configs/mcu123-lpc2148/ostest/setenv.sh -# -# Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# - -if [ "$(basename $0)" = "setenv.sh" ] ; then - echo "You must source this script, not run it!" 1>&2 - exit 1 -fi - -if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi - -WD=`pwd` -export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin" -export LPC214XSCRIPTS="$WD/configs/mcu123-lpc214x/scripts" -export PATH="${BUILDROOT_BIN}:${LPC214XSCRIPTS}:/sbin:/usr/sbin:${PATH_ORIG}" - -echo "PATH : ${PATH}" |