diff options
Diffstat (limited to 'nuttx/configs/mirtoo/README.txt')
-rw-r--r-- | nuttx/configs/mirtoo/README.txt | 28 |
1 files changed, 3 insertions, 25 deletions
diff --git a/nuttx/configs/mirtoo/README.txt b/nuttx/configs/mirtoo/README.txt index e28246de2..07c6ce7b1 100644 --- a/nuttx/configs/mirtoo/README.txt +++ b/nuttx/configs/mirtoo/README.txt @@ -859,30 +859,6 @@ selected as follow: Where <subdir> is one of the following: - ostest: - ======= - This configuration directory, performs a simple OS test using - apps/examples/ostest. This configuration use UART1 which is - available on FUNC 4 and 5 on connector X3: - - CONFIG_PIC32MX_UART1=y : UART1 for serial console - CONFIG_UART1_SERIAL_CONSOLE=n - - If you are not using MPLAB to debug, you may switch to UART2 - by editting the .config file after configuration to disable UART1 - and select UART2. You should also change Make.defs to use the - release.ld linker script instead of the debug.ld link script. - - This configuration also uses the Microchip C32 toolchain under - windows by default: - - CONFIG_PIC32MX_MICROCHIPW_LITE=y : Lite version of windows toolchain - - To switch to the Linux C32 toolchain you will have to change (1) the - toolchain selection in .config (after configuration) and (2) the - path to the toolchain in setenv.sh. See notes above with regard to - the XC32 toolchain. - nsh: ==== This configuration directory holds configuration files tht can @@ -895,7 +871,9 @@ Where <subdir> is one of the following: UART2 ----- If you are not using MPLAB to debug, you may switch to UART2 - by following the instructions above for the ostest configuration. + by editting the .config file after configuration to disable UART1 + and select UART2. You should also change Make.defs to use the + release.ld linker script instead of the debug.ld link script. This configuration also uses the Microchip C32 toolchain under windows by default: |