diff options
Diffstat (limited to 'nuttx/configs/olimex-lpc2378')
-rw-r--r-- | nuttx/configs/olimex-lpc2378/ostest/Make.defs | 131 | ||||
-rw-r--r-- | nuttx/configs/olimex-lpc2378/ostest/appconfig | 39 | ||||
-rw-r--r-- | nuttx/configs/olimex-lpc2378/ostest/defconfig | 271 | ||||
-rwxr-xr-x | nuttx/configs/olimex-lpc2378/ostest/setenv.sh | 52 |
4 files changed, 0 insertions, 493 deletions
diff --git a/nuttx/configs/olimex-lpc2378/ostest/Make.defs b/nuttx/configs/olimex-lpc2378/ostest/Make.defs deleted file mode 100644 index 181fa39bc..000000000 --- a/nuttx/configs/olimex-lpc2378/ostest/Make.defs +++ /dev/null @@ -1,131 +0,0 @@ -############################################################################## -# configs/olimex-lpc2378/ostest/Make.defs -# -# Copyright (C) 2010 Rommel Marcelo. All rights reserved. -# Author: Rommel Marcelo -# -# This is part of the NuttX RTOS and based on the LPC2148 port: -# -# Copyright (C) 2010 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################## - -include ${TOPDIR}/.config -include ${TOPDIR}/tools/Config.mk -include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs - -ifeq ($(WINTOOL),y) - # Windows-native toolchains - DIRLINK = $(TOPDIR)/tools/copydir.sh - DIRUNLINK = $(TOPDIR)/tools/unlink.sh - MKDEP = $(TOPDIR)/tools/mknulldeps.sh - ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" - ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" -else - # Linux/Cygwin-native toolchain - MKDEP = $(TOPDIR)/tools/mkdeps.sh - ARCHINCLUDES = -I. -isystem $(TOPDIR)/include - ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script -endif - -CC = $(CROSSDEV)gcc -CXX = $(CROSSDEV)g++ -CPP = $(CROSSDEV)gcc -E -LD = $(CROSSDEV)ld -AR = $(CROSSDEV)ar rcs -NM = $(CROSSDEV)nm -OBJCOPY = $(CROSSDEV)objcopy -OBJDUMP = $(CROSSDEV)objdump - -ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} -ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} - -ifeq ($(ARCHCCMAJOR),4) -ifneq ($(HOSTOS),Cygwin) -OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment -endif -endif - -ifeq ("${CONFIG_DEBUG}","y") - ARCHOPTIMIZATION = -g -endif - -ifneq ($(CONFIG_DEBUG_NOOPT),y) - ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer -endif - -ifeq ($(ARCHCCMAJOR),4) - ARCHCPUFLAGS = -mcpu=arm7tdmi -mfloat-abi=soft -else - ARCHCPUFLAGS = -mapcs-32 -mcpu=arm7tdmi -msoft-float -endif - -ARCHCFLAGS = -fno-builtin -ARCHCXXFLAGS = -fno-builtin -fno-exceptions -ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 -ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -ARCHWARNINGSXX = -Wall -Wshadow -ARCHDEFINES = - -CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ - $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) -CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \ - $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) -CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -AFLAGS = $(CFLAGS) -D__ASSEMBLY__ - -NXFLATLDFLAGS1 = -r -d -warn-common -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) \ - -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld \ - -no-check-sections -LDNXFLATFLAGS = -e main -s 2048 - -OBJEXT = .o -LIBEXT = .a -EXEEXT = - -ifneq ($(CROSSDEV),arm-nuttx-elf-) - LDFLAGS += -nostartfiles -nodefaultlibs -endif -ifeq ($(CONFIG_DEBUG),y) - LDFLAGS += -g -endif - - -HOSTCC = gcc -HOSTINCLUDES = -I. -HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe -HOSTLDFLAGS = - diff --git a/nuttx/configs/olimex-lpc2378/ostest/appconfig b/nuttx/configs/olimex-lpc2378/ostest/appconfig deleted file mode 100644 index e74529116..000000000 --- a/nuttx/configs/olimex-lpc2378/ostest/appconfig +++ /dev/null @@ -1,39 +0,0 @@ -############################################################################ -# configs/olimex-lpc2378/ostest/appconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/ostest - diff --git a/nuttx/configs/olimex-lpc2378/ostest/defconfig b/nuttx/configs/olimex-lpc2378/ostest/defconfig deleted file mode 100644 index b3913c1f9..000000000 --- a/nuttx/configs/olimex-lpc2378/ostest/defconfig +++ /dev/null @@ -1,271 +0,0 @@ -############################################################################ -# configs/olimex-lpc2378/ostest/defconfig -# -# Copyright (C) 2010 Rommel Marcelo. All rights reserved. -# Author: Rommel Marcelo -# -# This is part of the NuttX RTOS and based on the LPC2148 port: -# -# Copyright (C) 2010 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# Architecture selection -# -CONFIG_ARCH="arm" -CONFIG_ARCH_ARM=y -CONFIG_ARCH_ARM7TDMI=y -CONFIG_ARCH_CHIP="lpc2378" -CONFIG_ARCH_CHIP_LPC2378=y -CONFIG_ARCH_BOARD="olimex-lpc2378" -CONFIG_ARCH_BOARD_OLIMEXLPC2378=y -CONFIG_ARCH_IRQPRIO=y -CONFIG_BOARD_LOOPSPERMSEC=3270 -CONFIG_ARCH_LEDS=y -CONFIG_RAM_SIZE=32768 -CONFIG_RAM_START=0x40000000 -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_STACKDUMP=y - -# Identify toolchain and linker options -# -CONFIG_OLIMEX_LPC2378_CODESOURCERYW=n -CONFIG_OLIMEX_LPC2378_CODESOURCERYL=y -CONFIG_OLIMEX_LPC2378_DEVKITARM=n -CONFIG_OLIMEX_LPC2378_BUILDROOT=n - -# -# LPC2378 specific chip initialization -#CONFIG_PLL_CLKSRC - identifies the clock source to use -# IRC = 0, MAIN = 1, RTC = 2 -# -CONFIG_EXTMEM_MODE=n -CONFIG_RAM_MODE=n -CONFIG_CODE_BASE=0x00000000 -CONFIG_PLL_SETUP=y -CONFIG_PLL_CLKSRC= 1 -CONFIG_MAM_SETUP=y -#TODO: CONFIG_EMC_SETUP=n -CONFIG_ADC_SETUP=n -CONFIG_USBDEV=n -CONFIG_UART0=y -CONFIG_UART2=y - -# -# LPC23xx specific device driver settings -# -CONFIG_UART0_SERIAL_CONSOLE=y -CONFIG_UART2_SERIAL_CONSOLE=n - -CONFIG_UART0_TXBUFSIZE=128 -CONFIG_UART2_TXBUFSIZE=256 - -CONFIG_UART0_RXBUFSIZE=128 -CONFIG_UART2_RXBUFSIZE=256 - -# Baud Rate -CONFIG_UART0_BAUD=9600 -CONFIG_UART2_BAUD=576000 -# Data Bits -CONFIG_UART0_BITS=8 -CONFIG_UART2_BITS=8 -# Parity Bits -CONFIG_UART0_PARITY=0 -CONFIG_UART2_PARITY=0 -# 2 Stop Bits ? -CONFIG_UART0_2STOP=0 -CONFIG_UART2_2STOP=0 - -# -# General build options -# -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=y -CONFIG_RAW_BINARY=y - -# -# General OS setup -# -CONFIG_USER_ENTRYPOINT="ostest_main" -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -#CONFIG_DEBUG_MM=y -#CONFIG_DEBUG_SCHED=y -#CONFIG_DEBUG_FS=y -CONFIG_MM_REGIONS=1 -CONFIG_ARCH_LOWPUTC=y -CONFIG_RR_INTERVAL=0 -CONFIG_SCHED_INSTRUMENTATION=n -CONFIG_TASK_NAME_SIZE=0 -CONFIG_START_YEAR=2009 -CONFIG_START_MONTH=7 -CONFIG_START_DAY=13 -CONFIG_JULIAN_TIME=n -CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE= -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n -CONFIG_SDCLONE_DISABLE=y -CONFIG_NXFLAT=n -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=n -CONFIG_DISABLE_ENVIRON=n -CONFIG_DISABLE_POLL=y - -# -# Misc libc settings -# -CONFIG_NOPRINTF_FIELDWIDTH=n - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve sysem performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n - -# -# Sizes of configurable things (0 disables) -# -CONFIG_MAX_TASKS=16 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=4 -CONFIG_NFILE_DESCRIPTORS=8 -CONFIG_NFILE_STREAMS=8 -CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=64 -CONFIG_NUNGET_CHARS=2 -CONFIG_PREALLOC_MQ_MSGS=4 -CONFIG_MQ_MAXMSGSIZE=32 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=4 -CONFIG_PREALLOC_TIMERS=4 - -# -# Filesystem configuration -# -CONFIG_FS_FAT=n -CONFIG_FS_ROMFS=n - -# -# Maintain legacy build behavior (revisit) -# - -CONFIG_MMCSD=y -CONFIG_MMCSD_SPI=y -CONFIG_MTD=y - -# -# SPI-based MMC/SD driver -# -CONFIG_MMCSD_NSLOTS=0 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=20000000 - -# -# Settings for examples/hello -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=4096 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 - -# Settings for examples/serloop -CONFIG_EXAMPLES_SERLOOP_BUFIO= - -# -# Settings for examples/nsh -# -CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_ARCHINIT=n -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=0x0a000002 -CONFIG_NSH_DRIPADDR=0x0a000001 -CONFIG_NSH_NETMASK=0xffffff00 -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT="/tmp" - - -# Stack and heap information -# -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_IDLETHREAD_STACKSIZE=2048 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 diff --git a/nuttx/configs/olimex-lpc2378/ostest/setenv.sh b/nuttx/configs/olimex-lpc2378/ostest/setenv.sh deleted file mode 100755 index 9e7ff11fc..000000000 --- a/nuttx/configs/olimex-lpc2378/ostest/setenv.sh +++ /dev/null @@ -1,52 +0,0 @@ -#!/bin/bash -# configs/olimex-lpc2378/ostest/setenv.sh -# -# Author: Rommel Marcelo -# Copyright (C) 2010 Rommel Marcelo. All rights reserved. -# -# This is part of the NuttX RTOS and based on the LPC2148 port: -# -# Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# - -if [ "$(basename $0)" = "setenv.sh" ] ; then - echo "You must source this script, not run it!" 1>&2 - exit 1 -fi - -if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi - -WD=`pwd` -export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin" -export LPC23XXSCRIPTS="$WD/configs/olimex-lpc2378/scripts" -export PATH="${BUILDROOT_BIN}:${LPC23XXSCRIPTS}:/sbin:/usr/sbin:${PATH_ORIG}" - -echo "PATH : ${PATH}" |