1 files changed, 128 insertions, 0 deletions
diff --git a/nuttx/configs/olimex-strp711/src/up_enc28j60.c b/nuttx/configs/olimex-strp711/src/up_enc28j60.c
new file mode 100755
index 000000000..4bccb572f
--- /dev/null
+++ b/nuttx/configs/olimex-strp711/src/up_enc28j60.c
@@ -0,0 +1,128 @@
+/****************************************************************************
+ * configs/olimex-strp711/src/up_enc28j60.c
+ *
+ *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <stdio.h>
+#include <debug.h>
+
+#include <nuttx/spi.h>
+#include <nuttx/enc28j60.h>
+
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "up_arch.h"
+#include "up_internal.h"
+
+#ifdef CONFIG_NET_ENC28J60
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/* Configuration ************************************************************/
+
+#ifndef CONFIG_STR71X_BSPI1
+# error "Need CONFIG_STR71X_BSP1 in the configuration"
+#endif
+
+/* SPI Assumptions **********************************************************/
+
+#define ENC28J60_SPI_PORTNO 1 /* On SPI1 */
+#define ENC28J60_DEVNO      0 /* Only one ENC28J60 */
+#define ENC28J60_IRQ        0 /* NEEDED!!!!!!!!!!!!!!!! */
+
+/* Debug ********************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_netinitialize
+ ****************************************************************************/
+
+void up_netinitialize(void)
+{
+  FAR struct spi_dev_s *spi;
+  int ret;
+
+  /* Get the SPI port */
+
+  nvdbg("up_netinitialize: Initializing SPI port %d\n", ENC28J60_SPI_PORTNO);
+
+  spi = up_spiinitialize(ENC28J60_SPI_PORTNO);
+  if (!spi)
+    {
+      ndbg("up_netinitialize: Failed to initialize SPI port %d\n",
+           ENC28J60_SPI_PORTNO);
+      return;
+    }
+
+  nvdbg("up_netinitialize: Successfully initialized SPI port %d\n",
+        ENC28J60_SPI_PORTNO);
+
+  /* Bind the SPI port to the ENC28J60 driver */
+
+  nvdbg("up_netinitialize: Binding SPI port %d to ENC28J60 device %d\n",
+        ENC28J60_SPI_PORTNO, ENC28J60_DEVNO);
+
+#warning "Need to implement IRQ interrupt before we can use this"
+  ret = enc_initialize(spi, ENC28J60_DEVNO, ENC28J60_IRQ);
+  if (ret < 0)
+    {
+      ndbg("up_netinitialize: Failed to bind SPI port %d ENC28J60 device %d: %d\n",
+           ENC28J60_SPI_PORTNO, ENC28J60_DEVNO, ret);
+      return;
+    }
+
+  nvdbg("up_netinitialize: Successfuly bound SPI port %d ENC28J60 device %d\n",
+        ENC28J60_SPI_PORTNO, ENC28J60_DEVNO);
+}
+#endif /* CONFIG_NET_ENC28J60 */