diff options
Diffstat (limited to 'nuttx/configs/open1788/src/lpc17_lcd.c')
-rw-r--r-- | nuttx/configs/open1788/src/lpc17_lcd.c | 96 |
1 files changed, 96 insertions, 0 deletions
diff --git a/nuttx/configs/open1788/src/lpc17_lcd.c b/nuttx/configs/open1788/src/lpc17_lcd.c new file mode 100644 index 000000000..7c70e2ebd --- /dev/null +++ b/nuttx/configs/open1788/src/lpc17_lcd.c @@ -0,0 +1,96 @@ +/************************************************************************************ + * configs/open1788/src/lpc17_lcd.c + * arch/arm/src/board/lpc17_lcd.c + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> + +#include <stdbool.h> +#include <debug.h> + +#include "lpc17_lcd.h" +#include "lpc17_gpio.h" + +#include "open1788.h" + +#ifdef CONFIG_LPC17_LCD + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: lpc17_lcdinitialize + * + * Description: + * Initialize the LCD. Setup backlight (initially off) + * + ************************************************************************************/ + +void lpc17_lcdinitialize(void) +{ + /* Configure the LCD backlight (and turn the backlight off) */ + + lpc17_configgpio(GPIO_LCD_BL); +} + +/************************************************************************************ + * Name: lpc17_backlight + * + * Description: + * If CONFIG_LPC17_LCD_BACKLIGHT is defined, then the board-specific logic must + * provide this interface to turn the backlight on and off. + * + ************************************************************************************/ + +#ifdef CONFIG_LPC17_LCD_BACKLIGHT +void lpc17_backlight(bool blon) +{ + lpc17_gpiowrite(GPIO_LCD_BL, blon); +} +#endif + +#endif /* CONFIG_LPC17_LCD */ |