diff options
Diffstat (limited to 'nuttx/configs/pcblogic-pic32mx/README.txt')
-rw-r--r-- | nuttx/configs/pcblogic-pic32mx/README.txt | 32 |
1 files changed, 0 insertions, 32 deletions
diff --git a/nuttx/configs/pcblogic-pic32mx/README.txt b/nuttx/configs/pcblogic-pic32mx/README.txt index dd7a37335..8f22b5000 100644 --- a/nuttx/configs/pcblogic-pic32mx/README.txt +++ b/nuttx/configs/pcblogic-pic32mx/README.txt @@ -576,38 +576,6 @@ Configurations Configuration sub-directories ----------------------------- - ostest: - This configuration directory, performs a simple OS test using - apps/examples/ostest. - - NOTES: - - 1. The serial console is on UART1. Therefore, you will need an external - RS232 driver or TTL serial-to-USB converter. The UART1 TX and RX - pins are available on: - - TX -- Pin 53: U1TX/RF8 - RX -- Pin 52: U1RX/RF2 - - Power for the converter is available from the power point connector: - - GND -- POWER POINT: GND - Vcc -- POWER POINT: Vdd (3.3V) -- Or P32_VBUS (+5V) - Or +5V from a USB PC port. - - The serial console is configured for 115200 8N1 by default. - - 2. By default, this configuration uses an older Microchip C32 toolchain - for Windows (the newer ones seem to be incompatible) and builds under - Cygwin (or probably MSYS). That can easily be reconfigured, of course. - - Build Setup: - CONFIG_HOST_WINDOWS=y : Builds under Windows - CONFIG_WINDOWS_CYGWIN=y : Using Cygwin - - System Type: - CONFIG_MIPS32_TOOLCHAIN_MICROCHIPW_LITE=y : Older C32 toolchain - nsh: This configuration directory holds configuration files tht can be used to support the NuttShell (NSH). |