diff options
Diffstat (limited to 'nuttx/configs/sam3u-ek/src')
-rwxr-xr-x | nuttx/configs/sam3u-ek/src/Makefile | 2 | ||||
-rwxr-xr-x | nuttx/configs/sam3u-ek/src/up_nsh.c | 36 |
2 files changed, 19 insertions, 19 deletions
diff --git a/nuttx/configs/sam3u-ek/src/Makefile b/nuttx/configs/sam3u-ek/src/Makefile index c80b99c8f..9aa681b8b 100755 --- a/nuttx/configs/sam3u-ek/src/Makefile +++ b/nuttx/configs/sam3u-ek/src/Makefile @@ -41,7 +41,7 @@ ASRCS = AOBJS = $(ASRCS:.S=$(OBJEXT)) CSRCS = up_boot.c up_leds.c up_buttons.c up_spi.c up_usbdev.c up_lcd.c -ifeq ($(CONFIG_EXAMPLES_NSH_ARCHINIT),y) +ifeq ($(CONFIG_NSH_ARCHINIT),y) CSRCS += up_nsh.c endif ifeq ($(CONFIG_SAM3U_HSMCI),y) diff --git a/nuttx/configs/sam3u-ek/src/up_nsh.c b/nuttx/configs/sam3u-ek/src/up_nsh.c index cb3665f90..842d8b762 100755 --- a/nuttx/configs/sam3u-ek/src/up_nsh.c +++ b/nuttx/configs/sam3u-ek/src/up_nsh.c @@ -62,26 +62,26 @@ /* PORT and SLOT number probably depend on the board configuration */ #ifdef CONFIG_ARCH_BOARD_SAM3UEK -# define CONFIG_EXAMPLES_NSH_HAVEUSBDEV 1 -# define CONFIG_EXAMPLES_NSH_HAVEMMCSD 1 -# if defined(CONFIG_EXAMPLES_NSH_MMCSDSLOTNO) && CONFIG_EXAMPLES_NSH_MMCSDSLOTNO != 0 +# define CONFIG_NSH_HAVEUSBDEV 1 +# define CONFIG_NSH_HAVEMMCSD 1 +# if defined(CONFIG_NSH_MMCSDSLOTNO) && CONFIG_NSH_MMCSDSLOTNO != 0 # error "Only one MMC/SD slot" -# undef CONFIG_EXAMPLES_NSH_MMCSDSLOTNO +# undef CONFIG_NSH_MMCSDSLOTNO # endif -# ifndef CONFIG_EXAMPLES_NSH_MMCSDSLOTNO -# define CONFIG_EXAMPLES_NSH_MMCSDSLOTNO 0 +# ifndef CONFIG_NSH_MMCSDSLOTNO +# define CONFIG_NSH_MMCSDSLOTNO 0 # endif #else /* Add configuration for new SAM3U boards here */ # error "Unrecognized SAM3U board" -# undef CONFIG_EXAMPLES_NSH_HAVEUSBDEV -# undef CONFIG_EXAMPLES_NSH_HAVEMMCSD +# undef CONFIG_NSH_HAVEUSBDEV +# undef CONFIG_NSH_HAVEMMCSD #endif /* Can't support USB features if USB is not enabled */ #ifndef CONFIG_USBDEV -# undef CONFIG_EXAMPLES_NSH_HAVEUSBDEV +# undef CONFIG_NSH_HAVEUSBDEV #endif /* Can't support MMC/SD features if mountpoints are disabled or if SDIO support @@ -89,11 +89,11 @@ */ #if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_SAM3U_HSMCI) -# undef CONFIG_EXAMPLES_NSH_HAVEMMCSD +# undef CONFIG_NSH_HAVEMMCSD #endif -#ifndef CONFIG_EXAMPLES_NSH_MMCSDMINOR -# define CONFIG_EXAMPLES_NSH_MMCSDMINOR 0 +#ifndef CONFIG_NSH_MMCSDMINOR +# define CONFIG_NSH_MMCSDMINOR 0 #endif /* Debug ********************************************************************/ @@ -126,7 +126,7 @@ int nsh_archinitialize(void) { -#ifdef CONFIG_EXAMPLES_NSH_HAVEMMCSD +#ifdef CONFIG_NSH_HAVEMMCSD FAR struct sdio_dev_s *sdio; int ret; @@ -134,20 +134,20 @@ int nsh_archinitialize(void) /* First, get an instance of the SDIO interface */ message("nsh_archinitialize: Initializing SDIO slot %d\n", - CONFIG_EXAMPLES_NSH_MMCSDSLOTNO); - sdio = sdio_initialize(CONFIG_EXAMPLES_NSH_MMCSDSLOTNO); + CONFIG_NSH_MMCSDSLOTNO); + sdio = sdio_initialize(CONFIG_NSH_MMCSDSLOTNO); if (!sdio) { message("nsh_archinitialize: Failed to initialize SDIO slot %d\n", - CONFIG_EXAMPLES_NSH_MMCSDSLOTNO); + CONFIG_NSH_MMCSDSLOTNO); return -ENODEV; } /* Now bind the SDIO interface to the MMC/SD driver */ message("nsh_archinitialize: Bind SDIO to the MMC/SD driver, minor=%d\n", - CONFIG_EXAMPLES_NSH_MMCSDMINOR); - ret = mmcsd_slotinitialize(CONFIG_EXAMPLES_NSH_MMCSDMINOR, sdio); + CONFIG_NSH_MMCSDMINOR); + ret = mmcsd_slotinitialize(CONFIG_NSH_MMCSDMINOR, sdio); if (ret != OK) { message("nsh_archinitialize: Failed to bind SDIO to the MMC/SD driver: %d\n", ret); |