diff options
Diffstat (limited to 'nuttx/configs/sam3u-ek')
20 files changed, 2236 insertions, 1759 deletions
diff --git a/nuttx/configs/sam3u-ek/README.txt b/nuttx/configs/sam3u-ek/README.txt index 2e0c50f9d..9907c7bd1 100644 --- a/nuttx/configs/sam3u-ek/README.txt +++ b/nuttx/configs/sam3u-ek/README.txt @@ -41,12 +41,12 @@ GNU Toolchain Options add one of the following configuration options to your .config (or defconfig) file: - CONFIG_SAM3U_CODESOURCERYW=y : CodeSourcery under Windows - CONFIG_SAM3U_CODESOURCERYL=y : CodeSourcery under Linux - CONFIG_SAM3U_DEVKITARM=y : devkitARM under Windows - CONFIG_SAM3U_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) + CONFIG_SAM34_CODESOURCERYW=y : CodeSourcery under Windows + CONFIG_SAM34_CODESOURCERYL=y : CodeSourcery under Linux + CONFIG_SAM34_DEVKITARM=y : devkitARM under Windows + CONFIG_SAM34_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) - If you are not using CONFIG_SAM3U_BUILDROOT, then you may also have to modify + If you are not using CONFIG_SAM34_BUILDROOT, then you may also have to modify the PATH in the setenv.h file if your make cannot find the tools. NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are @@ -311,15 +311,15 @@ SAM3U-EK-specific Configuration Options Individual subsystems can be enabled: - CONFIG_SAM3U_DMA - CONFIG_SAM3U_HSMCI - CONFIG_SAM3U_NAND - CONFIG_SAM3U_SPI - CONFIG_SAM3U_UART - CONFIG_SAM3U_USART0 - CONFIG_SAM3U_USART1 - CONFIG_SAM3U_USART2 - CONFIG_SAM3U_USART3 + CONFIG_SAM34_DMA + CONFIG_SAM34_HSMCI + CONFIG_SAM34_NAND + CONFIG_SAM34_SPI + CONFIG_SAM34_UART + CONFIG_SAM34_USART0 + CONFIG_SAM34_USART1 + CONFIG_SAM34_USART2 + CONFIG_SAM34_USART3 Some subsystems can be configured to operate in different ways. The drivers need to know how to configure the subsystem. diff --git a/nuttx/configs/sam3u-ek/include/board.h b/nuttx/configs/sam3u-ek/include/board.h index 01817c784..dd9c893fd 100644 --- a/nuttx/configs/sam3u-ek/include/board.h +++ b/nuttx/configs/sam3u-ek/include/board.h @@ -2,7 +2,7 @@ * configs/sam3u-ek/include/board.h * include/arch/board/board.h * - * Copyright (C) 2009-2011 Gregory Nutt. All rights reserved. + * Copyright (C) 2009-2011, 2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without @@ -82,10 +82,10 @@ /* Resulting frequencies */ -#define SAM3U_MAINOSC_FREQUENCY (12000000) -#define SAM3U_MCK_FREQUENCY (48000000) -#define SAM3U_PLLA_FREQUENCY (96000000) -#define SAM3U_CPU_FREQUENCY (48000000) +#define SAM_MAINOSC_FREQUENCY (12000000) +#define SAM_MCK_FREQUENCY (48000000) +#define SAM_PLLA_FREQUENCY (96000000) +#define SAM_CPU_FREQUENCY (48000000) /* HSMCI clocking * @@ -97,12 +97,12 @@ */ /* MCK = 48MHz, CLKDIV = 59, MCI_SPEED = 48MHz / 2 * (59+1) = 400 KHz */ - + #define HSMCI_INIT_CLKDIV (59 << HSMCI_MR_CLKDIV_SHIFT) /* MCK = 48MHz, CLKDIV = 1, MCI_SPEED = 48MHz / 2 * (1+1) = 12 MHz */ -#define HSMCI_MMCXFR_CLKDIV (3 << HSMCI_MR_CLKDIV_SHIFT) +#define HSMCI_MMCXFR_CLKDIV (3 << HSMCI_MR_CLKDIV_SHIFT) /* MCK = 48MHz, CLKDIV = 0, MCI_SPEED = 48MHz / 2 * (0+1) = 24 MHz */ diff --git a/nuttx/configs/sam3u-ek/knsh/defconfig b/nuttx/configs/sam3u-ek/knsh/defconfig index 71c646083..3156086f1 100755..100644 --- a/nuttx/configs/sam3u-ek/knsh/defconfig +++ b/nuttx/configs/sam3u-ek/knsh/defconfig @@ -70,6 +70,7 @@ CONFIG_ARCH="arm" # CONFIG_ARCH_CHIP_DM320 is not set # CONFIG_ARCH_CHIP_IMX is not set # CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set # CONFIG_ARCH_CHIP_LM is not set # CONFIG_ARCH_CHIP_LPC17XX is not set # CONFIG_ARCH_CHIP_LPC214X is not set @@ -77,7 +78,7 @@ CONFIG_ARCH="arm" # CONFIG_ARCH_CHIP_LPC31XX is not set # CONFIG_ARCH_CHIP_LPC43XX is not set # CONFIG_ARCH_CHIP_NUC1XX is not set -CONFIG_ARCH_CHIP_SAM3U=y +CONFIG_ARCH_CHIP_SAM34=y # CONFIG_ARCH_CHIP_STM32 is not set # CONFIG_ARCH_CHIP_STR71X is not set CONFIG_ARCH_CORTEXM3=y @@ -86,6 +87,7 @@ CONFIG_ARCH_CHIP="sam3u" # CONFIG_ARMV7M_USEBASEPRI is not set CONFIG_ARCH_HAVE_MPU=y CONFIG_ARMV7M_MPU=y +CONFIG_ARMV7M_MPU_NREGIONS=8 # # ARMV7M Configuration Options @@ -99,21 +101,22 @@ CONFIG_ARMV7M_OABI_TOOLCHAIN=y # CONFIG_SDIO_WIDTH_D1_ONLY is not set # -# AT91SAM3 Configuration Options +# AT91SAM3/SAM4 Configuration Options # CONFIG_ARCH_CHIP_AT91SAM3U4E=y +CONFIG_ARCH_CHIP_SAM3U=y # # AT91SAM3 Peripheral Support # -# CONFIG_SAM3U_DMA is not set -# CONFIG_SAM3U_NAND is not set -# CONFIG_SAM3U_HSMCI is not set -CONFIG_SAM3U_UART=y -# CONFIG_SAM3U_USART0 is not set -# CONFIG_SAM3U_USART1 is not set -# CONFIG_SAM3U_USART2 is not set -# CONFIG_SAM3U_USART3 is not set +# CONFIG_SAM34_DMA is not set +# CONFIG_SAM34_NAND is not set +# CONFIG_SAM34_HSMCI is not set +CONFIG_SAM34_UART=y +# CONFIG_SAM34_USART0 is not set +# CONFIG_SAM34_USART1 is not set +# CONFIG_SAM34_USART2 is not set +# CONFIG_SAM34_USART3 is not set # # AT91SAM3 UART Configuration @@ -143,6 +146,8 @@ CONFIG_ARCH_HAVE_VFORK=y CONFIG_ARCH_STACKDUMP=y # CONFIG_ENDIAN_BIG is not set # CONFIG_ARCH_HAVE_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set # # Board Settings @@ -249,7 +254,12 @@ CONFIG_IDLETHREAD_STACKSIZE=1024 CONFIG_USERMAIN_STACKSIZE=2048 CONFIG_PTHREAD_STACK_MIN=256 CONFIG_PTHREAD_STACK_DEFAULT=2048 + +# +# System call configuration +# CONFIG_SYS_RESERVED=8 +CONFIG_SYS_NNEST=2 # # Device Drivers @@ -266,6 +276,7 @@ CONFIG_DEV_NULL=y # CONFIG_RTC is not set # CONFIG_WATCHDOG is not set # CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set # CONFIG_BCH is not set # CONFIG_INPUT is not set # CONFIG_LCD is not set @@ -283,7 +294,6 @@ CONFIG_SDIO_BLOCKSETUP=y # CONFIG_PM is not set # CONFIG_POWER is not set # CONFIG_SENSORS is not set -# CONFIG_SERCOMM_CONSOLE is not set CONFIG_SERIAL=y # CONFIG_DEV_LOWCONSOLE is not set # CONFIG_16550_UART is not set @@ -336,6 +346,7 @@ CONFIG_FS_FAT=y # CONFIG_FAT_DMAMEMORY is not set # CONFIG_FS_NXFFS is not set # CONFIG_FS_ROMFS is not set +# CONFIG_FS_SMARTFS is not set # # System Logging @@ -359,6 +370,11 @@ CONFIG_MM_REGIONS=3 # CONFIG_GRAN is not set # +# Audio Support +# +# CONFIG_AUDIO is not set + +# # Binary Formats # # CONFIG_BINFMT_DISABLE is not set @@ -383,6 +399,7 @@ CONFIG_LIB_HOMEDIR="/" # CONFIG_LIBM is not set # CONFIG_NOPRINTF_FIELDWIDTH is not set # CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIB_RAND_ORDER=1 # CONFIG_EOL_IS_CR is not set # CONFIG_EOL_IS_LF is not set # CONFIG_EOL_IS_BOTH_CRLF is not set @@ -408,6 +425,7 @@ CONFIG_SCHED_WORKSTACKSIZE=1024 # CONFIG_SCHED_LPWORK is not set # CONFIG_SCHED_USRWORK is not set # CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set # # Basic CXX Support @@ -441,8 +459,9 @@ CONFIG_SCHED_WORKSTACKSIZE=1024 # CONFIG_EXAMPLES_IGMP is not set # CONFIG_EXAMPLES_LCDRW is not set # CONFIG_EXAMPLES_MM is not set -# CONFIG_EXAMPLES_MOUNT is not set # CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NRF24L01TERM is not set CONFIG_EXAMPLES_NSH=y # CONFIG_EXAMPLES_NULL is not set # CONFIG_EXAMPLES_NX is not set @@ -463,6 +482,9 @@ CONFIG_EXAMPLES_NSH=y # CONFIG_EXAMPLES_ROMFS is not set # CONFIG_EXAMPLES_SENDMAIL is not set # CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_TCPECHO is not set # CONFIG_EXAMPLES_TELNETD is not set # CONFIG_EXAMPLES_THTTPD is not set # CONFIG_EXAMPLES_TIFF is not set @@ -558,6 +580,11 @@ CONFIG_NSH_DISABLE_PS=y # CONFIG_NSH_DISABLE_USLEEP is not set # CONFIG_NSH_DISABLE_WGET is not set # CONFIG_NSH_DISABLE_XD is not set + +# +# Configure Command Options +# +# CONFIG_NSH_CMDOPT_DF_H is not set CONFIG_NSH_CODECS_BUFSIZE=128 CONFIG_NSH_FILEIOSIZE=512 CONFIG_NSH_LINELEN=64 @@ -595,6 +622,10 @@ CONFIG_NSH_CONSOLE=y # CONFIG_SYSTEM_INSTALL is not set # +# FLASH Erase-all Command +# + +# # readline() # CONFIG_SYSTEM_READLINE=y diff --git a/nuttx/configs/sam3u-ek/nsh/appconfig b/nuttx/configs/sam3u-ek/nsh/appconfig deleted file mode 100644 index 3e94f548d..000000000 --- a/nuttx/configs/sam3u-ek/nsh/appconfig +++ /dev/null @@ -1,44 +0,0 @@ -############################################################################ -# configs/sam3u-ek/nsh/appconfig -# -# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/nsh - -# The NSH library - -CONFIGURED_APPS += system/readline -CONFIGURED_APPS += nshlib - diff --git a/nuttx/configs/sam3u-ek/nsh/defconfig b/nuttx/configs/sam3u-ek/nsh/defconfig index 7a6c12eab..271b9cef1 100755..100644 --- a/nuttx/configs/sam3u-ek/nsh/defconfig +++ b/nuttx/configs/sam3u-ek/nsh/defconfig @@ -1,223 +1,226 @@ -############################################################################ -# configs/sam3u-ek/nsh/defconfig -# -# Copyright (C) 2010 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSPIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# Architecture Selection # -CONFIG_ARCH="arm" +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +# CONFIG_INTELHEX_BINARY is not set +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_SYMBOLS is not set + +# +# System Type +# +# CONFIG_ARCH_8051 is not set CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +CONFIG_ARCH_CHIP_SAM34=y +# CONFIG_ARCH_CHIP_STM32 is not set +# CONFIG_ARCH_CHIP_STR71X is not set CONFIG_ARCH_CORTEXM3=y +CONFIG_ARCH_FAMILY="armv7-m" CONFIG_ARCH_CHIP="sam3u" -CONFIG_ARCH_CHIP_AT91SAM3U4E=y -CONFIG_ARCH_BOARD="sam3u-ek" -CONFIG_ARCH_BOARD_SAM3UEK=y -CONFIG_BOARD_LOOPSPERMSEC=4768 -CONFIG_DRAM_SIZE=32768 -CONFIG_DRAM_START=0x20000000 -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_BOOTLOADER=n -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_BUTTONS=y -CONFIG_ARCH_CALIBRATION=n -CONFIG_ARCH_DMA=n +# CONFIG_ARMV7M_USEBASEPRI is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARMV7M_MPU is not set # -# Identify toolchain and linker options +# ARMV7M Configuration Options # -CONFIG_SAM3U_CODESOURCERYW=n -CONFIG_SAM3U_CODESOURCERYL=n -CONFIG_SAM3U_DEVKITARM=n -CONFIG_SAM3U_BUILDROOT=y +CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set +CONFIG_ARMV7M_OABI_TOOLCHAIN=y # -# Individual subsystems can be enabled: +# AT91SAM3/SAM4 Configuration Options # -CONFIG_SAM3U_DMA=n -CONFIG_SAM3U_NAND=n -CONFIG_SAM3U_HSMCI=n -CONFIG_SAM3U_UART=y -CONFIG_SAM3U_USART0=n -CONFIG_SAM3U_USART1=n -CONFIG_SAM3U_USART2=n -CONFIG_SAM3U_USART3=n +CONFIG_ARCH_CHIP_AT91SAM3U4E=y +CONFIG_ARCH_CHIP_SAM3U=y # -# Some subsystems can be configured to operate in different ways.. -# The drivers need to know how to configure the subsystem. +# AT91SAM3 Peripheral Support # +# CONFIG_SAM34_DMA is not set +# CONFIG_SAM34_NAND is not set +# CONFIG_SAM34_HSMCI is not set +CONFIG_SAM34_UART=y +# CONFIG_SAM34_USART0 is not set +# CONFIG_SAM34_USART1 is not set +# CONFIG_SAM34_USART2 is not set +# CONFIG_SAM34_USART3 is not set -CONFIG_GPIOA_IRQ=n -CONFIG_GPIOB_IRQ=n -CONFIG_GPIOC_IRQ=n -CONFIG_USART0_ISUART=y -CONFIG_USART1_ISUART=y -CONFIG_USART2_ISUART=y -CONFIG_USART3_ISUART=y +# +# AT91SAM3 UART Configuration +# # -# SAM3U specific serial device driver settings +# AT91SAM3 GPIO Interrupt Configuration # -CONFIG_UART_SERIAL_CONSOLE=Y -CONFIG_USART0_SERIAL_CONSOLE=n -CONFIG_USART1_SERIAL_CONSOLE=n -CONFIG_USART2_SERIAL_CONSOLE=n -CONFIG_USART3_SERIAL_CONSOLE=n +# CONFIG_GPIOA_IRQ is not set +# CONFIG_GPIOB_IRQ is not set +# CONFIG_GPIOC_IRQ is not set -CONFIG_UART_TXBUFSIZE=256 -CONFIG_USART0_TXBUFSIZE=256 -CONFIG_USART1_TXBUFSIZE=256 -CONFIG_USART2_TXBUFSIZE=256 -CONFIG_USART3_TXBUFSIZE=256 +# +# External Memory Configuration +# -CONFIG_UART_RXBUFSIZE=256 -CONFIG_USART0_RXBUFSIZE=256 -CONFIG_USART1_RXBUFSIZE=256 -CONFIG_USART2_RXBUFSIZE=256 -CONFIG_USART3_RXBUFSIZE=256 +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_HAVE_VFORK=y +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set -CONFIG_UART_BAUD=115200 -CONFIG_USART0_BAUD=115200 -CONFIG_USART1_BAUD=115200 -CONFIG_USART2_BAUD=115200 -CONFIG_USART3_BAUD=115200 +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=4768 +# CONFIG_ARCH_CALIBRATION is not set +CONFIG_DRAM_START=0x20000000 +CONFIG_DRAM_SIZE=32768 +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_UART_BITS=8 -CONFIG_USART0_BITS=8 -CONFIG_USART1_BITS=8 -CONFIG_USART2_BITS=8 -CONFIG_USART3_BITS=8 +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set -CONFIG_UART_PARITY=0 -CONFIG_USART0_PARITY=0 -CONFIG_USART1_PARITY=0 -CONFIG_USART2_PARITY=0 -CONFIG_USART3_PARITY=0 +# +# Board Selection +# +CONFIG_ARCH_BOARD_SAM3UEK=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="sam3u-ek" -CONFIG_UART_2STOP=0 -CONFIG_USART0_2STOP=0 -CONFIG_USART1_2STOP=0 -CONFIG_USART2_2STOP=0 -CONFIG_USART3_2STOP=0 +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_HAVE_BUTTONS=y +CONFIG_ARCH_BUTTONS=y +CONFIG_ARCH_HAVE_IRQBUTTONS=y +# CONFIG_ARCH_IRQBUTTONS is not set +CONFIG_NSH_MMCSDMINOR=0 # -# General build options +# Board-Specific Options # -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=n -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=y # -# General OS setup +# RTOS Features # -CONFIG_USER_ENTRYPOINT="nsh_main" -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_MM_REGIONS=3 -CONFIG_ARCH_LOWPUTC=y +# CONFIG_BOARD_INITIALIZE is not set +CONFIG_MSEC_PER_TICK=10 CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n +# CONFIG_SCHED_INSTRUMENTATION is not set CONFIG_TASK_NAME_SIZE=0 +# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_JULIAN_TIME is not set CONFIG_START_YEAR=2009 CONFIG_START_MONTH=9 CONFIG_START_DAY=21 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=n -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set CONFIG_SDCLONE_DISABLE=y -CONFIG_NXFLAT=n -CONFIG_SCHED_WORKQUEUE=n -CONFIG_SCHED_WORKPRIORITY=192 -CONFIG_SCHED_WORKPERIOD=50000 -CONFIG_SCHED_WORKSTACKSIZE=1024 -CONFIG_SIG_SIGWORK=17 - -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=n -CONFIG_DISABLE_ENVIRON=n -CONFIG_DISABLE_POLL=y - -# -# Misc libc settings -# -CONFIG_NOPRINTF_FIELDWIDTH=n +# CONFIG_SCHED_WAITPID is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_ENVIRON is not set # -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve system performance +# Signal Numbers # -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 # # Sizes of configurable things (0 disables) @@ -228,8 +231,6 @@ CONFIG_NPTHREAD_KEYS=4 CONFIG_NFILE_DESCRIPTORS=8 CONFIG_NFILE_STREAMS=8 CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=64 -CONFIG_NUNGET_CHARS=2 CONFIG_PREALLOC_MQ_MSGS=4 CONFIG_MQ_MAXMSGSIZE=32 CONFIG_MAX_WDOGPARMS=2 @@ -237,225 +238,387 @@ CONFIG_PREALLOC_WDOGS=4 CONFIG_PREALLOC_TIMERS=4 # -# Filesystem configuration +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 + +# +# Device Drivers +# +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_UART=y +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +CONFIG_UART_SERIAL_CONSOLE=y +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# UART Configuration +# +CONFIG_UART_RXBUFSIZE=256 +CONFIG_UART_TXBUFSIZE=256 +CONFIG_UART_BAUD=115200 +CONFIG_UART_BITS=8 +CONFIG_UART_PARITY=0 +CONFIG_UART_2STOP=0 +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options +# + +# +# System Logging +# +# CONFIG_RAMLOG is not set + +# +# Networking Support +# +# CONFIG_NET is not set + +# +# File Systems +# + +# +# File system configuration # +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_FS_RAMMAP is not set CONFIG_FS_FAT=y -CONFIG_FS_ROMFS=n +# CONFIG_FAT_LCNAMES is not set +# CONFIG_FAT_LFN is not set +# CONFIG_FS_FATTIME is not set +# CONFIG_FAT_DMAMEMORY is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_SMARTFS is not set # -# Maintain legacy build behavior (revisit) +# System Logging # +# CONFIG_SYSLOG_ENABLE is not set +# CONFIG_SYSLOG is not set -CONFIG_MMCSD=y -CONFIG_MMCSD_SPI=y -CONFIG_MMCSD_SDIO=y -CONFIG_MTD=y +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_MULTIHEAP is not set +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=3 +# CONFIG_GRAN is not set # -# SPI-based MMC/SD driver +# Audio Support # -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 +# CONFIG_AUDIO is not set # -# Block driver buffering +# Binary Formats # -CONFIG_FS_READAHEAD=n -CONFIG_FS_WRITEBUFFER=n +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_BINFMT_EXEPATH is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +# CONFIG_BUILTIN is not set +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set # -# SDIO-based MMC/SD driver +# Library Routines +# + # -CONFIG_SDIO_DMA=n -CONFIG_SDIO_BLOCKSETUP=y -CONFIG_MMCSD_MMCSUPPORT=n -CONFIG_MMCSD_HAVECARDDETECT=n - -# -# TCP/IP and UDP support via uIP -# -CONFIG_NET=n -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=0 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 -CONFIG_NET_TCP=n -CONFIG_NET_TCP_CONNS=40 -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=n -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=n -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set # -# UIP Network Utilities +# Non-standard Library Support # -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set # -# USB Device Configuration +# Basic CXX Support # -CONFIG_USBDEV=n -CONFIG_USBDEV_ISOCHRONOUS=n -CONFIG_USBDEV_DUALSPEED=n -CONFIG_USBDEV_SELFPOWERED=y -CONFIG_USBDEV_REMOTEWAKEUP=n -CONFIG_USBDEV_MAXPOWER=100 -CONFIG_USBDEV_TRACE=n -CONFIG_USBDEV_TRACE_NRECORDS=128 +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set # -# USB Serial Device Configuration +# Application Configuration # -CONFIG_PL2303=n -CONFIG_PL2303_EPINTIN=1 -CONFIG_PL2303_EPBULKOUT=2 -CONFIG_PL2303_EPBULKIN=3 -CONFIG_PL2303_NWRREQS=4 -CONFIG_PL2303_NRDREQS=4 -CONFIG_PL2303_VENDORID=0x067b -CONFIG_PL2303_PRODUCTID=0x2303 -CONFIG_PL2303_VENDORSTR="Nuttx" -CONFIG_PL2303_PRODUCTSTR="USBdev Serial" -CONFIG_PL2303_RXBUFSIZE=512 -CONFIG_PL2303_TXBUFSIZE=512 # -# USB Storage Device Configuration +# Built-In Applications # -CONFIG_USBMSC=n -CONFIG_USBMSC_EP0MAXPACKET=64 -CONFIG_USBMSC_EPBULKOUT=2 -CONFIG_USBMSC_EPBULKIN=5 -CONFIG_USBMSC_NRDREQS=2 -CONFIG_USBMSC_NWRREQS=2 -CONFIG_USBMSC_BULKINREQLEN=256 -CONFIG_USBMSC_BULKOUTREQLEN=256 -CONFIG_USBMSC_VENDORID=0x584e -CONFIG_USBMSC_VENDORSTR="NuttX" -CONFIG_USBMSC_PRODUCTID=0x5342 -CONFIG_USBMSC_PRODUCTSTR="USBdev Storage" -CONFIG_USBMSC_VERSIONNO=0x0399 -CONFIG_USBMSC_REMOVABLE=y # -# Graphics related configuration settings -# -CONFIG_NX=n -CONFIG_NX_MULTIUSER=n -CONFIG_NX_NPLANES=1 -CONFIG_NX_DISABLE_1BPP=y -CONFIG_NX_DISABLE_2BPP=y -CONFIG_NX_DISABLE_4BPP=y -CONFIG_NX_DISABLE_8BPP=y -CONFIG_NX_DISABLE_16BPP=n -CONFIG_NX_DISABLE_24BPP=y -CONFIG_NX_DISABLE_32BPP=y -CONFIG_NX_PACKEDMSFIRST=n -CONFIG_NX_LCDDRIVER=y -CONFIG_LCD_MAXPOWER=31 -CONFIG_LCD_MAXCONTRAST=1 -CONFIG_NX_MOUSE=y -CONFIG_NX_KBD=y -#CONFIG_NXTK_BORDERWIDTH=4 -#CONFIG_NXTK_BORDERCOLOR1 -#CONFIG_NXTK_BORDERCOLOR2 -CONFIG_NXTK_AUTORAISE=n -CONFIG_NXFONT_SANS23X27=y -CONFIG_NXFONTS_CHARBITS=7 -CONFIG_NX_BLOCKING=y -CONFIG_NX_MXSERVERMSGS=32 -CONFIG_NX_MXCLIENTMSGS=16 - -# -# Settings for examples/uip -# -CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002 -CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00 -CONFIG_EXAMPLES_UIP_DHCPC=n - -# -# Settings for examples/nettest -CONFIG_EXAMPLES_NETTEST_SERVER=n -CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLES_NETTEST_NOMAC=n -CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002 -CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00 -CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001 - -# -# Settings for examples/ostest -# -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 - -# -# Settings for apps/nshlib +# Examples # +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_COMPOSITE is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NRF24L01TERM is not set +CONFIG_EXAMPLES_NSH=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POLL is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set + +# +# Graphics Support +# +# CONFIG_TIFF is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_RESOLV is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKFATFS is not set +# CONFIG_NSH_DISABLE_MKFIFO is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MW is not set +# CONFIG_NSH_DISABLE_NSFMOUNT is not set +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PING is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set + +# +# Configure Command Options +# +# CONFIG_NSH_CMDOPT_DF_H is not set +CONFIG_NSH_CODECS_BUFSIZE=128 CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n CONFIG_NSH_LINELEN=64 CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLEBG is not set CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_ARCHINIT=n -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=0x0a000002 -CONFIG_NSH_DRIPADDR=0x0a000001 -CONFIG_NSH_NETMASK=0xffffff00 -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT="/tmp" - -# -# Architecture-specific NSH options -# -CONFIG_NSH_MMCSDSPIPORTNO=0 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 # -# Settings for examples/usbserial +# USB Trace Support # -CONFIG_EXAMPLES_USBSERIAL_INONLY=n -CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n -CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n -CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n +# CONFIG_NSH_CONDEV is not set +# CONFIG_NSH_ARCHINIT is not set -CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n -CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n -CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n -CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n +# +# NxWidgets/NxWM +# # -# Stack and heap information +# System NSH Add-Ons +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# FLASH Erase-all Command +# + +# +# readline() +# +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set + +# +# USB Monitor # -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 diff --git a/nuttx/configs/sam3u-ek/nx/appconfig b/nuttx/configs/sam3u-ek/nx/appconfig deleted file mode 100644 index a5ea3cccc..000000000 --- a/nuttx/configs/sam3u-ek/nx/appconfig +++ /dev/null @@ -1,39 +0,0 @@ -############################################################################ -# configs/sam3u-ek/nx/appconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/nx - diff --git a/nuttx/configs/sam3u-ek/nx/defconfig b/nuttx/configs/sam3u-ek/nx/defconfig index e7c85ee93..573178aaa 100755..100644 --- a/nuttx/configs/sam3u-ek/nx/defconfig +++ b/nuttx/configs/sam3u-ek/nx/defconfig @@ -1,224 +1,225 @@ -############################################################################ -# configs/sam3u-ek/nx/defconfig -# -# Copyright (C) 2010 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSPIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# Architecture Selection # -CONFIG_ARCH="arm" +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +# CONFIG_INTELHEX_BINARY is not set +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_SYMBOLS is not set + +# +# System Type +# +# CONFIG_ARCH_8051 is not set CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +CONFIG_ARCH_CHIP_SAM34=y +# CONFIG_ARCH_CHIP_STM32 is not set +# CONFIG_ARCH_CHIP_STR71X is not set CONFIG_ARCH_CORTEXM3=y +CONFIG_ARCH_FAMILY="armv7-m" CONFIG_ARCH_CHIP="sam3u" -CONFIG_ARCH_CHIP_AT91SAM3U4E=y -CONFIG_ARCH_BOARD="sam3u-ek" -CONFIG_ARCH_BOARD_SAM3UEK=y -CONFIG_BOARD_LOOPSPERMSEC=4768 -CONFIG_DRAM_SIZE=32768 -CONFIG_DRAM_START=0x20000000 -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_BOOTLOADER=n -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_BUTTONS=y -CONFIG_ARCH_CALIBRATION=n -CONFIG_ARCH_DMA=n +# CONFIG_ARMV7M_USEBASEPRI is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARMV7M_MPU is not set # -# Identify toolchain and linker options +# ARMV7M Configuration Options # -CONFIG_SAM3U_CODESOURCERYW=n -CONFIG_SAM3U_CODESOURCERYL=n -CONFIG_SAM3U_DEVKITARM=n -CONFIG_SAM3U_BUILDROOT=y +CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set +CONFIG_ARMV7M_OABI_TOOLCHAIN=y # -# Individual subsystems can be enabled: +# AT91SAM3/SAM4 Configuration Options # -CONFIG_SAM3U_DMA=n -CONFIG_SAM3U_NAND=n -CONFIG_SAM3U_HSMCI=n -CONFIG_SAM3U_UART=y -CONFIG_SAM3U_USART0=n -CONFIG_SAM3U_USART1=n -CONFIG_SAM3U_USART2=n -CONFIG_SAM3U_USART3=n +CONFIG_ARCH_CHIP_AT91SAM3U4E=y +CONFIG_ARCH_CHIP_SAM3U=y # -# Some subsystems can be configured to operate in different ways.. -# The drivers need to know how to configure the subsystem. +# AT91SAM3 Peripheral Support # +# CONFIG_SAM34_DMA is not set +# CONFIG_SAM34_NAND is not set +# CONFIG_SAM34_HSMCI is not set +CONFIG_SAM34_UART=y +# CONFIG_SAM34_USART0 is not set +# CONFIG_SAM34_USART1 is not set +# CONFIG_SAM34_USART2 is not set +# CONFIG_SAM34_USART3 is not set -CONFIG_GPIOA_IRQ=n -CONFIG_GPIOB_IRQ=n -CONFIG_GPIOC_IRQ=n -CONFIG_USART0_ISUART=y -CONFIG_USART1_ISUART=y -CONFIG_USART2_ISUART=y -CONFIG_USART3_ISUART=y +# +# AT91SAM3 UART Configuration +# # -# SAM3U specific serial device driver settings +# AT91SAM3 GPIO Interrupt Configuration # -CONFIG_UART_SERIAL_CONSOLE=Y -CONFIG_USART0_SERIAL_CONSOLE=n -CONFIG_USART1_SERIAL_CONSOLE=n -CONFIG_USART2_SERIAL_CONSOLE=n -CONFIG_USART3_SERIAL_CONSOLE=n +# CONFIG_GPIOA_IRQ is not set +# CONFIG_GPIOB_IRQ is not set +# CONFIG_GPIOC_IRQ is not set -CONFIG_UART_TXBUFSIZE=256 -CONFIG_USART0_TXBUFSIZE=256 -CONFIG_USART1_TXBUFSIZE=256 -CONFIG_USART2_TXBUFSIZE=256 -CONFIG_USART3_TXBUFSIZE=256 +# +# External Memory Configuration +# -CONFIG_UART_RXBUFSIZE=256 -CONFIG_USART0_RXBUFSIZE=256 -CONFIG_USART1_RXBUFSIZE=256 -CONFIG_USART2_RXBUFSIZE=256 -CONFIG_USART3_RXBUFSIZE=256 +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_HAVE_VFORK=y +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set -CONFIG_UART_BAUD=115200 -CONFIG_USART0_BAUD=115200 -CONFIG_USART1_BAUD=115200 -CONFIG_USART2_BAUD=115200 -CONFIG_USART3_BAUD=115200 +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=4768 +# CONFIG_ARCH_CALIBRATION is not set +CONFIG_DRAM_START=0x20000000 +CONFIG_DRAM_SIZE=32768 +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_UART_BITS=8 -CONFIG_USART0_BITS=8 -CONFIG_USART1_BITS=8 -CONFIG_USART2_BITS=8 -CONFIG_USART3_BITS=8 +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set -CONFIG_UART_PARITY=0 -CONFIG_USART0_PARITY=0 -CONFIG_USART1_PARITY=0 -CONFIG_USART2_PARITY=0 -CONFIG_USART3_PARITY=0 +# +# Board Selection +# +CONFIG_ARCH_BOARD_SAM3UEK=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="sam3u-ek" -CONFIG_UART_2STOP=0 -CONFIG_USART0_2STOP=0 -CONFIG_USART1_2STOP=0 -CONFIG_USART2_2STOP=0 -CONFIG_USART3_2STOP=0 +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_HAVE_BUTTONS=y +CONFIG_ARCH_BUTTONS=y +CONFIG_ARCH_HAVE_IRQBUTTONS=y +# CONFIG_ARCH_IRQBUTTONS is not set # -# General build options +# Board-Specific Options # -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=n -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=y # -# General OS setup +# RTOS Features # -CONFIG_USER_ENTRYPOINT="nx_main" -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_DEBUG_GRAPHICS=n -CONFIG_MM_REGIONS=3 -CONFIG_ARCH_LOWPUTC=y +# CONFIG_BOARD_INITIALIZE is not set +CONFIG_MSEC_PER_TICK=10 CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n +# CONFIG_SCHED_INSTRUMENTATION is not set CONFIG_TASK_NAME_SIZE=0 +# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_JULIAN_TIME is not set CONFIG_START_YEAR=2010 CONFIG_START_MONTH=4 CONFIG_START_DAY=18 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=n -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set CONFIG_SDCLONE_DISABLE=y -CONFIG_NXFLAT=n -CONFIG_SCHED_WORKQUEUE=n -CONFIG_SCHED_WORKPRIORITY=192 -CONFIG_SCHED_WORKPERIOD=50000 -CONFIG_SCHED_WORKSTACKSIZE=1024 -CONFIG_SIG_SIGWORK=17 - -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n +# CONFIG_SCHED_WAITPID is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="nx_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set CONFIG_DISABLE_POSIX_TIMERS=y -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=y +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set CONFIG_DISABLE_ENVIRON=y -CONFIG_DISABLE_POLL=y # -# Misc libc settings +# Signal Numbers # -CONFIG_NOPRINTF_FIELDWIDTH=n - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve system performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 # # Sizes of configurable things (0 disables) @@ -229,8 +230,6 @@ CONFIG_NPTHREAD_KEYS=4 CONFIG_NFILE_DESCRIPTORS=12 CONFIG_NFILE_STREAMS=12 CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=64 -CONFIG_NUNGET_CHARS=2 CONFIG_PREALLOC_MQ_MSGS=4 CONFIG_MQ_MAXMSGSIZE=32 CONFIG_MAX_WDOGPARMS=2 @@ -238,250 +237,413 @@ CONFIG_PREALLOC_WDOGS=4 CONFIG_PREALLOC_TIMERS=4 # -# Framebuffer driver options -CONFIG_FB_CMAP=n -CONFIG_FB_HWCURSOR=n -CONFIG_FB_HWCURSORIMAGE=n -#CONFIG_FB_HWCURSORSIZE -#CONFIG_FB_TRANSPARENCY +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 # -# Filesystem configuration +# Device Drivers # -CONFIG_FS_FAT=n -CONFIG_FS_ROMFS=n +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +CONFIG_LCD=y + +# +# Common LCD Settings +# +# CONFIG_LCD_NOGETRUN is not set +CONFIG_LCD_MAXCONTRAST=1 +CONFIG_LCD_MAXPOWER=31 # -# Maintain legacy build behavior (revisit) +# Graphic LCD Devices # - -CONFIG_MMCSD=y -CONFIG_MMCSD_SPI=y -CONFIG_MMCSD_SDIO=y -CONFIG_MTD=y +# CONFIG_LCD_P14201 is not set +# CONFIG_LCD_NOKIA6100 is not set +# CONFIG_LCD_MIO283QT2 is not set +# CONFIG_LCD_UG9664HSWAG01 is not set +# CONFIG_LCD_ST7567 is not set +# CONFIG_LCD_UG2864AMBAG01 is not set +# CONFIG_LCD_SSD1289 is not set +CONFIG_LCD_LANDSCAPE=y +# CONFIG_LCD_PORTRAIT is not set +# CONFIG_LCD_RPORTRAIT is not set +# CONFIG_LCD_RLANDSCAPE is not set # -# SPI-based MMC/SD driver +# Alphanumeric/Segment LCD Devices # -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 +# CONFIG_LCD_LCD1602 is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_UART=y +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +CONFIG_UART_SERIAL_CONSOLE=y +# CONFIG_NO_SERIAL_CONSOLE is not set # -# Block driver buffering +# UART Configuration # -CONFIG_FS_READAHEAD=n -CONFIG_FS_WRITEBUFFER=n +CONFIG_UART_RXBUFSIZE=256 +CONFIG_UART_TXBUFSIZE=256 +CONFIG_UART_BAUD=115200 +CONFIG_UART_BITS=8 +CONFIG_UART_PARITY=0 +CONFIG_UART_2STOP=0 +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set # -# SDIO-based MMC/SD driver +# System Logging Device Options # -CONFIG_SDIO_DMA=n -CONFIG_SDIO_BLOCKSETUP=y -CONFIG_MMCSD_MMCSUPPORT=n -CONFIG_MMCSD_HAVECARDDETECT=n # -# TCP/IP and UDP support via uIP +# System Logging # -CONFIG_NET=n -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=0 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 -CONFIG_NET_TCP=n -CONFIG_NET_TCP_CONNS=40 -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=n -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=n -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n +# CONFIG_RAMLOG is not set # -# UIP Network Utilities +# Networking Support # -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 +# CONFIG_NET is not set # -# USB Device Configuration +# File Systems # -CONFIG_USBDEV=n -CONFIG_USBDEV_ISOCHRONOUS=n -CONFIG_USBDEV_DUALSPEED=n -CONFIG_USBDEV_SELFPOWERED=y -CONFIG_USBDEV_REMOTEWAKEUP=n -CONFIG_USBDEV_MAXPOWER=100 -CONFIG_USBDEV_TRACE=n -CONFIG_USBDEV_TRACE_NRECORDS=128 # -# USB Serial Device Configuration +# File system configuration # -CONFIG_PL2303=n -CONFIG_PL2303_EPINTIN=1 -CONFIG_PL2303_EPBULKOUT=2 -CONFIG_PL2303_EPBULKIN=3 -CONFIG_PL2303_NWRREQS=4 -CONFIG_PL2303_NRDREQS=4 -CONFIG_PL2303_VENDORID=0x067b -CONFIG_PL2303_PRODUCTID=0x2303 -CONFIG_PL2303_VENDORSTR="Nuttx" -CONFIG_PL2303_PRODUCTSTR="USBdev Serial" -CONFIG_PL2303_RXBUFSIZE=512 -CONFIG_PL2303_TXBUFSIZE=512 +CONFIG_DISABLE_MOUNTPOINT=y +# CONFIG_FS_RAMMAP is not set # -# USB Storage Device Configuration +# System Logging # -CONFIG_USBMSC=n -CONFIG_USBMSC_EP0MAXPACKET=64 -CONFIG_USBMSC_EPBULKOUT=2 -CONFIG_USBMSC_EPBULKIN=5 -CONFIG_USBMSC_NRDREQS=2 -CONFIG_USBMSC_NWRREQS=2 -CONFIG_USBMSC_BULKINREQLEN=256 -CONFIG_USBMSC_BULKOUTREQLEN=256 -CONFIG_USBMSC_VENDORID=0x584e -CONFIG_USBMSC_VENDORSTR="NuttX" -CONFIG_USBMSC_PRODUCTID=0x5342 -CONFIG_USBMSC_PRODUCTSTR="USBdev Storage" -CONFIG_USBMSC_VERSIONNO=0x0399 -CONFIG_USBMSC_REMOVABLE=y +# CONFIG_SYSLOG_ENABLE is not set +# CONFIG_SYSLOG is not set # -# Graphics related configuration settings +# Graphics Support # CONFIG_NX=y -CONFIG_NX_MULTIUSER=n +CONFIG_NX_LCDDRIVER=y CONFIG_NX_NPLANES=1 +# CONFIG_NX_WRITEONLY is not set + +# +# Supported Pixel Depths +# CONFIG_NX_DISABLE_1BPP=y CONFIG_NX_DISABLE_2BPP=y CONFIG_NX_DISABLE_4BPP=y CONFIG_NX_DISABLE_8BPP=y -CONFIG_NX_DISABLE_16BPP=n +# CONFIG_NX_DISABLE_16BPP is not set CONFIG_NX_DISABLE_24BPP=y CONFIG_NX_DISABLE_32BPP=y -CONFIG_NX_PACKEDMSFIRST=n -CONFIG_NX_LCDDRIVER=y -CONFIG_LCD_MAXPOWER=31 -CONFIG_LCD_MAXCONTRAST=1 +# CONFIG_NX_PACKEDMSFIRST is not set + +# +# Input Devices +# CONFIG_NX_MOUSE=y CONFIG_NX_KBD=y -#CONFIG_NXTK_BORDERWIDTH=4 -#CONFIG_NXTK_BORDERCOLOR1 -#CONFIG_NXTK_BORDERCOLOR2 -CONFIG_NXTK_AUTORAISE=n -CONFIG_NXFONT_SANS23X27=y + +# +# Framed Window Borders +# +CONFIG_NXTK_BORDERWIDTH=4 +CONFIG_NXTK_BORDERCOLOR1=0 +CONFIG_NXTK_BORDERCOLOR2=0 +CONFIG_NXTK_BORDERCOLOR3=0 +# CONFIG_NXTK_AUTORAISE is not set + +# +# Font Selections +# CONFIG_NXFONTS_CHARBITS=7 -CONFIG_NX_BLOCKING=y -CONFIG_NX_MXSERVERMSGS=32 -CONFIG_NX_MXCLIENTMSGS=16 +# CONFIG_NXFONT_MONO5X8 is not set +# CONFIG_NXFONT_SANS17X22 is not set +# CONFIG_NXFONT_SANS20X26 is not set +CONFIG_NXFONT_SANS23X27=y +# CONFIG_NXFONT_SANS22X29 is not set +# CONFIG_NXFONT_SANS28X37 is not set +# CONFIG_NXFONT_SANS39X48 is not set +# CONFIG_NXFONT_SANS17X23B is not set +# CONFIG_NXFONT_SANS20X27B is not set +# CONFIG_NXFONT_SANS22X29B is not set +# CONFIG_NXFONT_SANS28X37B is not set +# CONFIG_NXFONT_SANS40X49B is not set +# CONFIG_NXFONT_SERIF22X29 is not set +# CONFIG_NXFONT_SERIF29X37 is not set +# CONFIG_NXFONT_SERIF38X48 is not set +# CONFIG_NXFONT_SERIF22X28B is not set +# CONFIG_NXFONT_SERIF27X38B is not set +# CONFIG_NXFONT_SERIF38X49B is not set +# CONFIG_NXCONSOLE is not set + +# +# NX Multi-user only options +# +# CONFIG_NX_MULTIUSER is not set + +# +# Memory Management +# +# CONFIG_MM_MULTIHEAP is not set +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=3 +# CONFIG_GRAN is not set # -# Settings for examples/uip +# Audio Support # -CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002 -CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00 -CONFIG_EXAMPLES_UIP_DHCPC=n +# CONFIG_AUDIO is not set # -# Settings for examples/nettest -CONFIG_EXAMPLES_NETTEST_SERVER=n -CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLES_NETTEST_NOMAC=n -CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002 -CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00 -CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001 +# Binary Formats +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +# CONFIG_BUILTIN is not set +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# # -# Settings for examples/ostest +# Standard C Library Options # -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set # -# Settings for apps/nshlib +# Non-standard Library Support # -CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_ARCHINIT=n -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=0x0a000002 -CONFIG_NSH_DRIPADDR=0x0a000001 -CONFIG_NSH_NETMASK=0xffffff00 -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT="/tmp" +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set # -# Architecture-specific NSH options +# Basic CXX Support # -CONFIG_NSH_MMCSDSPIPORTNO=0 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set # -# Settings for examples/usbserial +# Application Configuration # -CONFIG_EXAMPLES_USBSERIAL_INONLY=n -CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n -CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n -CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n -CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n -CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n -CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n +# +# Built-In Applications +# # -# Settings for examples/nx +# Examples # +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_COMPOSITE is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NRF24L01TERM is not set +# CONFIG_EXAMPLES_NSH is not set +# CONFIG_EXAMPLES_NULL is not set +CONFIG_EXAMPLES_NX=y CONFIG_EXAMPLES_NX_VPLANE=0 CONFIG_EXAMPLES_NX_DEVNO=0 +# CONFIG_EXAMPLES_NX_DEFAULT_COLORS is not set CONFIG_EXAMPLES_NX_BGCOLOR=0x7b5d CONFIG_EXAMPLES_NX_COLOR1=0xe73f CONFIG_EXAMPLES_NX_COLOR2=0xdefb CONFIG_EXAMPLES_NX_TBCOLOR=0xad55 CONFIG_EXAMPLES_NX_FONTCOLOR=0x0000 +CONFIG_EXAMPLES_NX_DEFAULT_FONT=y CONFIG_EXAMPLES_NX_BPP=16 -CONFIG_EXAMPLES_NX_RAWWINDOWS=n -CONFIG_EXAMPLES_NX_STACKSIZE=2048 -CONFIG_EXAMPLES_NX_CLIENTPRIO=80 -CONFIG_EXAMPLES_NX_SERVERPRIO=120 -CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4 +# CONFIG_EXAMPLES_NX_RAWWINDOWS is not set +# CONFIG_EXAMPLES_NX_EXTERNINIT is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POLL is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set # -# Stack and heap information +# Graphics Support +# +# CONFIG_TIFF is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_RESOLV is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +# CONFIG_NSH_LIBRARY is not set + +# +# NxWidgets/NxWM +# + +# +# System NSH Add-Ons +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# FLASH Erase-all Command +# + +# +# readline() +# +# CONFIG_SYSTEM_READLINE is not set + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set + +# +# USB Monitor # -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 diff --git a/nuttx/configs/sam3u-ek/ostest/appconfig b/nuttx/configs/sam3u-ek/ostest/appconfig deleted file mode 100644 index 687a5c13f..000000000 --- a/nuttx/configs/sam3u-ek/ostest/appconfig +++ /dev/null @@ -1,39 +0,0 @@ -############################################################################ -# configs/sam3u-ek/ostest/appconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/ostest - diff --git a/nuttx/configs/sam3u-ek/ostest/defconfig b/nuttx/configs/sam3u-ek/ostest/defconfig index 82510c7d4..3425e77f8 100755..100644 --- a/nuttx/configs/sam3u-ek/ostest/defconfig +++ b/nuttx/configs/sam3u-ek/ostest/defconfig @@ -1,224 +1,225 @@ -############################################################################ -# configs/sam3u-ek/ostest/defconfig -# -# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSPIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# Architecture Selection # -CONFIG_ARCH="arm" +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +# CONFIG_INTELHEX_BINARY is not set +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_SYMBOLS is not set + +# +# System Type +# +# CONFIG_ARCH_8051 is not set CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +CONFIG_ARCH_CHIP_SAM34=y +# CONFIG_ARCH_CHIP_STM32 is not set +# CONFIG_ARCH_CHIP_STR71X is not set CONFIG_ARCH_CORTEXM3=y +CONFIG_ARCH_FAMILY="armv7-m" CONFIG_ARCH_CHIP="sam3u" -CONFIG_ARCH_CHIP_AT91SAM3U4E=y -CONFIG_ARCH_BOARD="sam3u-ek" -CONFIG_ARCH_BOARD_SAM3UEK=y -CONFIG_BOARD_LOOPSPERMSEC=4768 -CONFIG_DRAM_SIZE=32768 -CONFIG_DRAM_START=0x20000000 -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_BOOTLOADER=n -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_BUTTONS=y -CONFIG_ARCH_CALIBRATION=n -CONFIG_ARCH_DMA=n +# CONFIG_ARMV7M_USEBASEPRI is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARMV7M_MPU is not set # -# Identify toolchain and linker options +# ARMV7M Configuration Options # -CONFIG_SAM3U_CODESOURCERYW=n -CONFIG_SAM3U_CODESOURCERYL=n -CONFIG_SAM3U_DEVKITARM=n -CONFIG_SAM3U_BUILDROOT=y +CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set +CONFIG_ARMV7M_OABI_TOOLCHAIN=y # -# Individual subsystems can be enabled: +# AT91SAM3/SAM4 Configuration Options # -CONFIG_SAM3U_DMA=n -CONFIG_SAM3U_NAND=n -CONFIG_SAM3U_HSMCI=n -CONFIG_SAM3U_UART=y -CONFIG_SAM3U_USART0=n -CONFIG_SAM3U_USART1=n -CONFIG_SAM3U_USART2=n -CONFIG_SAM3U_USART3=n -CONFIG_SAM3U_NAND=n +CONFIG_ARCH_CHIP_AT91SAM3U4E=y +CONFIG_ARCH_CHIP_SAM3U=y # -# Some subsystems can be configured to operate in different ways.. -# The drivers need to know how to configure the subsystem. +# AT91SAM3 Peripheral Support # +# CONFIG_SAM34_DMA is not set +# CONFIG_SAM34_NAND is not set +# CONFIG_SAM34_HSMCI is not set +CONFIG_SAM34_UART=y +# CONFIG_SAM34_USART0 is not set +# CONFIG_SAM34_USART1 is not set +# CONFIG_SAM34_USART2 is not set +# CONFIG_SAM34_USART3 is not set -CONFIG_GPIOA_IRQ=n -CONFIG_GPIOB_IRQ=n -CONFIG_GPIOC_IRQ=n -CONFIG_USART0_ISUART=y -CONFIG_USART1_ISUART=y -CONFIG_USART2_ISUART=y -CONFIG_USART3_ISUART=y +# +# AT91SAM3 UART Configuration +# # -# SAM3U specific serial device driver settings +# AT91SAM3 GPIO Interrupt Configuration # -CONFIG_UART_SERIAL_CONSOLE=Y -CONFIG_USART0_SERIAL_CONSOLE=n -CONFIG_USART1_SERIAL_CONSOLE=n -CONFIG_USART2_SERIAL_CONSOLE=n -CONFIG_USART3_SERIAL_CONSOLE=n +# CONFIG_GPIOA_IRQ is not set +# CONFIG_GPIOB_IRQ is not set +# CONFIG_GPIOC_IRQ is not set -CONFIG_UART_TXBUFSIZE=256 -CONFIG_USART0_TXBUFSIZE=256 -CONFIG_USART1_TXBUFSIZE=256 -CONFIG_USART2_TXBUFSIZE=256 -CONFIG_USART3_TXBUFSIZE=256 +# +# External Memory Configuration +# -CONFIG_UART_RXBUFSIZE=256 -CONFIG_USART0_RXBUFSIZE=256 -CONFIG_USART1_RXBUFSIZE=256 -CONFIG_USART2_RXBUFSIZE=256 -CONFIG_USART3_RXBUFSIZE=256 +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_HAVE_VFORK=y +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set -CONFIG_UART_BAUD=115200 -CONFIG_USART0_BAUD=115200 -CONFIG_USART1_BAUD=115200 -CONFIG_USART2_BAUD=115200 -CONFIG_USART3_BAUD=115200 +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=4768 +# CONFIG_ARCH_CALIBRATION is not set +CONFIG_DRAM_START=0x20000000 +CONFIG_DRAM_SIZE=32768 +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_UART_BITS=8 -CONFIG_USART0_BITS=8 -CONFIG_USART1_BITS=8 -CONFIG_USART2_BITS=8 -CONFIG_USART3_BITS=8 +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set -CONFIG_UART_PARITY=0 -CONFIG_USART0_PARITY=0 -CONFIG_USART1_PARITY=0 -CONFIG_USART2_PARITY=0 -CONFIG_USART3_PARITY=0 +# +# Board Selection +# +CONFIG_ARCH_BOARD_SAM3UEK=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="sam3u-ek" -CONFIG_UART_2STOP=0 -CONFIG_USART0_2STOP=0 -CONFIG_USART1_2STOP=0 -CONFIG_USART2_2STOP=0 -CONFIG_USART3_2STOP=0 +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_HAVE_BUTTONS=y +CONFIG_ARCH_BUTTONS=y +CONFIG_ARCH_HAVE_IRQBUTTONS=y +# CONFIG_ARCH_IRQBUTTONS is not set # -# General build options +# Board-Specific Options # -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=n -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=y # -# General OS setup +# RTOS Features # -CONFIG_USER_ENTRYPOINT="ostest_main" -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_MM_REGIONS=3 -CONFIG_ARCH_LOWPUTC=y +# CONFIG_BOARD_INITIALIZE is not set +CONFIG_MSEC_PER_TICK=10 CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n +# CONFIG_SCHED_INSTRUMENTATION is not set CONFIG_TASK_NAME_SIZE=0 +# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_JULIAN_TIME is not set CONFIG_START_YEAR=2009 CONFIG_START_MONTH=9 CONFIG_START_DAY=21 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=y -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set CONFIG_SDCLONE_DISABLE=y -CONFIG_NXFLAT=n -CONFIG_SCHED_WORKQUEUE=n -CONFIG_SCHED_WORKPRIORITY=192 -CONFIG_SCHED_WORKPERIOD=50000 -CONFIG_SCHED_WORKSTACKSIZE=1024 -CONFIG_SIG_SIGWORK=17 - -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=y +# CONFIG_SCHED_WAITPID is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="ostest_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set CONFIG_DISABLE_ENVIRON=y -CONFIG_DISABLE_POLL=y # -# Misc libc settings +# Signal Numbers # -CONFIG_NOPRINTF_FIELDWIDTH=n - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve system performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 # # Sizes of configurable things (0 disables) @@ -229,8 +230,6 @@ CONFIG_NPTHREAD_KEYS=4 CONFIG_NFILE_DESCRIPTORS=8 CONFIG_NFILE_STREAMS=8 CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=64 -CONFIG_NUNGET_CHARS=2 CONFIG_PREALLOC_MQ_MSGS=4 CONFIG_MQ_MAXMSGSIZE=32 CONFIG_MAX_WDOGPARMS=2 @@ -238,224 +237,320 @@ CONFIG_PREALLOC_WDOGS=4 CONFIG_PREALLOC_TIMERS=4 # -# Filesystem configuration +# Stack and heap information # -CONFIG_FS_FAT=n -CONFIG_FS_ROMFS=n +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 # -# Maintain legacy build behavior (revisit) +# Device Drivers +# +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +CONFIG_SERIAL=y +CONFIG_DEV_LOWCONSOLE=y +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_UART=y +CONFIG_MCU_SERIAL=y +CONFIG_UART_SERIAL_CONSOLE=y +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# UART Configuration +# +CONFIG_UART_RXBUFSIZE=256 +CONFIG_UART_TXBUFSIZE=256 +CONFIG_UART_BAUD=115200 +CONFIG_UART_BITS=8 +CONFIG_UART_PARITY=0 +CONFIG_UART_2STOP=0 +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options # -CONFIG_MMCSD=y -CONFIG_MMCSD_SPI=y -CONFIG_MMCSD_SDIO=y -CONFIG_MTD=y +# +# System Logging +# +# CONFIG_RAMLOG is not set # -# SPI-based MMC/SD driver +# Networking Support # -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 +# CONFIG_NET is not set # -# Block driver buffering +# File Systems # -CONFIG_FS_READAHEAD=n -CONFIG_FS_WRITEBUFFER=n # -# SDIO-based MMC/SD driver +# File system configuration # -CONFIG_SDIO_DMA=n -CONFIG_MMCSD_MMCSUPPORT=n -CONFIG_MMCSD_HAVECARDDETECT=n +CONFIG_DISABLE_MOUNTPOINT=y +# CONFIG_FS_RAMMAP is not set # -# TCP/IP and UDP support via uIP +# System Logging # -CONFIG_NET=n -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=0 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 -CONFIG_NET_TCP=n -CONFIG_NET_TCP_CONNS=40 -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=n -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=n -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n +# CONFIG_SYSLOG_ENABLE is not set +# CONFIG_SYSLOG is not set # -# UIP Network Utilities +# Graphics Support # -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 +# CONFIG_NX is not set # -# USB Device Configuration +# Memory Management # -CONFIG_USBDEV=n -CONFIG_USBDEV_ISOCHRONOUS=n -CONFIG_USBDEV_DUALSPEED=n -CONFIG_USBDEV_SELFPOWERED=y -CONFIG_USBDEV_REMOTEWAKEUP=n -CONFIG_USBDEV_MAXPOWER=100 -CONFIG_USBDEV_TRACE=n -CONFIG_USBDEV_TRACE_NRECORDS=128 +# CONFIG_MM_MULTIHEAP is not set +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=3 +# CONFIG_GRAN is not set # -# USB Serial Device Configuration +# Audio Support # -CONFIG_PL2303=n -CONFIG_PL2303_EPINTIN=1 -CONFIG_PL2303_EPBULKOUT=2 -CONFIG_PL2303_EPBULKIN=3 -CONFIG_PL2303_NWRREQS=4 -CONFIG_PL2303_NRDREQS=4 -CONFIG_PL2303_VENDORID=0x067b -CONFIG_PL2303_PRODUCTID=0x2303 -CONFIG_PL2303_VENDORSTR="Nuttx" -CONFIG_PL2303_PRODUCTSTR="USBdev Serial" -CONFIG_PL2303_RXBUFSIZE=512 -CONFIG_PL2303_TXBUFSIZE=512 +# CONFIG_AUDIO is not set # -# USB Storage Device Configuration +# Binary Formats # -CONFIG_USBMSC=n -CONFIG_USBMSC_EP0MAXPACKET=64 -CONFIG_USBMSC_EPBULKOUT=2 -CONFIG_USBMSC_EPBULKIN=5 -CONFIG_USBMSC_NRDREQS=2 -CONFIG_USBMSC_NWRREQS=2 -CONFIG_USBMSC_BULKINREQLEN=256 -CONFIG_USBMSC_BULKOUTREQLEN=256 -CONFIG_USBMSC_VENDORID=0x584e -CONFIG_USBMSC_VENDORSTR="NuttX" -CONFIG_USBMSC_PRODUCTID=0x5342 -CONFIG_USBMSC_PRODUCTSTR="USBdev Storage" -CONFIG_USBMSC_VERSIONNO=0x0399 -CONFIG_USBMSC_REMOVABLE=y +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +# CONFIG_BUILTIN is not set +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set # -# Graphics related configuration settings -# -CONFIG_NX=n -CONFIG_NX_MULTIUSER=n -CONFIG_NX_NPLANES=1 -CONFIG_NX_DISABLE_1BPP=y -CONFIG_NX_DISABLE_2BPP=y -CONFIG_NX_DISABLE_4BPP=y -CONFIG_NX_DISABLE_8BPP=y -CONFIG_NX_DISABLE_16BPP=n -CONFIG_NX_DISABLE_24BPP=y -CONFIG_NX_DISABLE_32BPP=y -CONFIG_NX_PACKEDMSFIRST=n -CONFIG_NX_LCDDRIVER=y -CONFIG_LCD_MAXPOWER=31 -CONFIG_LCD_MAXCONTRAST=1 -CONFIG_NX_MOUSE=y -CONFIG_NX_KBD=y -#CONFIG_NXTK_BORDERWIDTH=4 -#CONFIG_NXTK_BORDERCOLOR1 -#CONFIG_NXTK_BORDERCOLOR2 -CONFIG_NXTK_AUTORAISE=n -CONFIG_NXFONT_SANS=y -CONFIG_NXFONTS_CHARBITS=7 -CONFIG_NX_BLOCKING=y -CONFIG_NX_MXSERVERMSGS=32 -CONFIG_NX_MXCLIENTMSGS=16 - -# -# Settings for examples/uip -# -CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002 -CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00 -CONFIG_EXAMPLES_UIP_DHCPC=n - -# -# Settings for examples/nettest -CONFIG_EXAMPLES_NETTEST_SERVER=n -CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLES_NETTEST_NOMAC=n -CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002 -CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00 -CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001 - -# -# Settings for examples/ostest -# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set + +# +# Non-standard Library Support +# +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_COMPOSITE is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NRF24L01TERM is not set +# CONFIG_EXAMPLES_NSH is not set +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +CONFIG_EXAMPLES_OSTEST=y +# CONFIG_EXAMPLES_OSTEST_BUILTIN is not set CONFIG_EXAMPLES_OSTEST_LOOPS=1 CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 +CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000 +CONFIG_EXAMPLES_OSTEST_RR_RUNS=10 +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POLL is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set # -# Settings for apps/nshlib +# Graphics Support # -CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_ARCHINIT=n -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=0x0a000002 -CONFIG_NSH_DRIPADDR=0x0a000001 -CONFIG_NSH_NETMASK=0xffffff00 -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT="/tmp" +# CONFIG_TIFF is not set # -# Architecture-specific NSH options +# Interpreters # -CONFIG_NSH_MMCSDSPIPORTNO=0 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # -# Settings for examples/usbserial +# Network Utilities # -CONFIG_EXAMPLES_USBSERIAL_INONLY=n -CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n -CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n -CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n -CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n -CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n -CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_RESOLV is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set # -# Stack and heap information +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +# CONFIG_NSH_LIBRARY is not set + +# +# NxWidgets/NxWM +# + +# +# System NSH Add-Ons +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# FLASH Erase-all Command +# + +# +# readline() +# +# CONFIG_SYSTEM_READLINE is not set + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set + +# +# USB Monitor # -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 diff --git a/nuttx/configs/sam3u-ek/src/Makefile b/nuttx/configs/sam3u-ek/src/Makefile index 258748a1d..8dbf0eae5 100644 --- a/nuttx/configs/sam3u-ek/src/Makefile +++ b/nuttx/configs/sam3u-ek/src/Makefile @@ -1,7 +1,7 @@ ############################################################################ # configs/sam3u-ek/src/Makefile # -# Copyright (C) 2009-2010, 2012 Gregory Nutt. All rights reserved. +# Copyright (C) 2009-2010, 2012-2013 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -37,12 +37,12 @@ CFLAGS += -I$(TOPDIR)/sched -ASRCS = +ASRCS = AOBJS = $(ASRCS:.S=$(OBJEXT)) CSRCS = up_boot.c up_leds.c up_buttons.c up_spi.c up_usbdev.c -ifeq ($(CONFIG_SAM3U_HSMCI),y) +ifeq ($(CONFIG_SAM34_HSMCI),y) CSRCS += up_lcd.c endif @@ -50,7 +50,7 @@ ifeq ($(CONFIG_NSH_ARCHINIT),y) CSRCS += up_nsh.c endif -ifeq ($(CONFIG_SAM3U_HSMCI),y) +ifeq ($(CONFIG_SAM34_HSMCI),y) CSRCS += up_mmcsd.c endif diff --git a/nuttx/configs/sam3u-ek/src/sam3uek_internal.h b/nuttx/configs/sam3u-ek/src/sam3uek_internal.h index 5b5138960..d81fbd7cc 100644 --- a/nuttx/configs/sam3u-ek/src/sam3uek_internal.h +++ b/nuttx/configs/sam3u-ek/src/sam3uek_internal.h @@ -2,7 +2,7 @@ * configs/sam3uek_eval/src/sam3uek_internal.h * arch/arm/src/board/sam3uek_internal.n * - * Copyright (C) 2009-2011 Gregory Nutt. All rights reserved. + * Copyright (C) 2009-2011, 2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without @@ -56,7 +56,7 @@ /* External Memory Usage ************************************************************/ /* LCD on CS2 */ -#define LCD_BASE SAM3U_EXTCS2_BASE +#define LCD_BASE SAM_EXTCS2_BASE /* Touchscreen controller (TSC) */ @@ -142,7 +142,7 @@ #define GPIO_TCS_IRQ (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN24) #define GPIO_TCS_BUSY (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN2) -#define SAM3U_TCS_IRQ SAM3U_IRQ_PA24 +#define SAM_TCS_IRQ SAM_IRQ_PA24 /* LEDs */ @@ -155,8 +155,8 @@ #define GPIO_BUTTON1 (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_CFG_DEGLITCH|GPIO_PORT_PIOA|GPIO_PIN18) #define GPIO_BUTTON2 (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_CFG_DEGLITCH|GPIO_PORT_PIOA|GPIO_PIN19) -#define IRQ_BUTTON1 SAM3U_IRQ_PA18 -#define IRQ_BUTTON2 SAM3U_IRQ_PA19 +#define IRQ_BUTTON1 SAM_IRQ_PA18 +#define IRQ_BUTTON2 SAM_IRQ_PA19 /* SD Card Detect */ @@ -214,11 +214,11 @@ extern void weak_function sam3u_usbinitialize(void); * Name: sam3u_hsmciinit * * Description: - * Initialize HSMCI support + * Initialize HSMCI support * ****************************************************************************/ -#ifdef CONFIG_SAM3U_HSMCI +#ifdef CONFIG_SAM34_HSMCI extern int weak_function sam3u_hsmciinit(void); #else # define sam3u_hsmciinit() @@ -232,7 +232,7 @@ extern int weak_function sam3u_hsmciinit(void); * ****************************************************************************/ -#ifdef CONFIG_SAM3U_HSMCI +#ifdef CONFIG_SAM34_HSMCI extern bool sam3u_cardinserted(unsigned char slot); #else # define sam3u_cardinserted(slot) (false) @@ -246,7 +246,7 @@ extern bool sam3u_cardinserted(unsigned char slot); * ****************************************************************************/ -#ifdef CONFIG_SAM3U_HSMCI +#ifdef CONFIG_SAM34_HSMCI extern bool sam3u_writeprotected(unsigned char slot); #else # define sam3u_writeprotected(slot) (false) diff --git a/nuttx/configs/sam3u-ek/src/up_boot.c b/nuttx/configs/sam3u-ek/src/up_boot.c index 87e91f039..11bb80f07 100644 --- a/nuttx/configs/sam3u-ek/src/up_boot.c +++ b/nuttx/configs/sam3u-ek/src/up_boot.c @@ -2,7 +2,7 @@ * configs/sam3u-ek/src/up_boot.c * arch/arm/src/board/up_boot.c * - * Copyright (C) 2009-2011 Gregory Nutt. All rights reserved. + * Copyright (C) 2009-2011, 2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without @@ -75,7 +75,7 @@ void sam3u_boardinitialize(void) * sam3u_spiinitialize() has been brought into the link. */ -#ifdef CONFIG_SAM3U_SPI +#ifdef CONFIG_SAM34_SPI if (sam3u_spiinitialize) { sam3u_spiinitialize(); @@ -87,7 +87,7 @@ void sam3u_boardinitialize(void) * into the build. */ -#if defined(CONFIG_USBDEV) && defined(CONFIG_SAM3U_USB) +#if defined(CONFIG_USBDEV) && defined(CONFIG_SAM34_USB) if (sam3u_usbinitialize) { sam3u_usbinitialize(); @@ -104,7 +104,7 @@ void sam3u_boardinitialize(void) * function sam3u_hsmciinit() has been brought into the build. */ -#ifdef CONFIG_SAM3U_HSMCI +#ifdef CONFIG_SAM34_HSMCI if (sam3u_hsmciinit) { sam3u_hsmciinit(); diff --git a/nuttx/configs/sam3u-ek/src/up_lcd.c b/nuttx/configs/sam3u-ek/src/up_lcd.c index de897ab9f..fded845a4 100644 --- a/nuttx/configs/sam3u-ek/src/up_lcd.c +++ b/nuttx/configs/sam3u-ek/src/up_lcd.c @@ -2,7 +2,7 @@ * configs/sam3u-ek/src/up_lcd.c * arch/arm/src/board/up_lcd.c * - * Copyright (C) 2010-2011 Gregory Nutt. All rights reserved. + * Copyright (C) 2010-2011, 2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without @@ -125,8 +125,8 @@ #include <arch/irq.h> #include "up_arch.h" -#include "sam3u_pmc.h" -#include "sam3u_smc.h" +#include "chip/sam_pmc.h" +#include "chip/sam_smc.h" #include "sam3u_internal.h" #include "sam3uek_internal.h" @@ -385,7 +385,7 @@ static const struct fb_videoinfo_s g_videoinfo = /* This is the standard, NuttX Plane information object */ -static const struct lcd_planeinfo_s g_planeinfo = +static const struct lcd_planeinfo_s g_planeinfo = { .putrun = sam3u_putrun, /* Put a run into LCD memory */ .getrun = sam3u_getrun, /* Get a run from LCD memory */ @@ -395,12 +395,12 @@ static const struct lcd_planeinfo_s g_planeinfo = /* This is the standard, NuttX LCD driver object */ -static struct sam3u_dev_s g_lcddev_s = +static struct sam3u_dev_s g_lcddev_s = { .dev = { /* LCD Configuration */ - + .getvideoinfo = sam3u_getvideoinfo, .getplaneinfo = sam3u_getplaneinfo, @@ -901,33 +901,33 @@ int up_lcdinitialize(void) /* Enable SMC peripheral clock */ - putreg32((1 << SAM3U_PID_SMC), SAM3U_PMC_PCER); - regdbg("PMC PCSR: %08x SMC: %08x\n", getreg32(SAM3U_PMC_PCSR), (1 << SAM3U_PID_SMC)); + putreg32((1 << SAM_PID_SMC), SAM_PMC_PCER); + regdbg("PMC PCSR: %08x SMC: %08x\n", getreg32(SAM_PMC_PCSR), (1 << SAM_PID_SMC)); /* Configure SMC CS2 */ regval = (4 << SMCCS_SETUP_NWESETUP_SHIFT) | (2 << SMCCS_SETUP_NCSWRSETUP_SHIFT) | (4 << SMCCS_SETUP_NRDSETUP_SHIFT) | (2 << SMCCS_SETUP_NCSRDSETUP_SHIFT); - putreg32(regval, SAM3U_SMCCS_SETUP(2)); + putreg32(regval, SAM_SMCCS_SETUP(2)); regval = (5 << SMCCS_PULSE_NWEPULSE_SHIFT) | (18 << SMCCS_PULSE_NCSWRPULSE_SHIFT) | (5 << SMCCS_PULSE_RDPULSE_SHIFT) | (18 << SMCCS_PULSE_NCSRDPULSE_SHIFT); - putreg32(regval, SAM3U_SMCCS_PULSE(2)); + putreg32(regval, SAM_SMCCS_PULSE(2)); regval = (22 << SMCCS_CYCLE_NWECYCLE_SHIFT) | (22 << SMCCS_CYCLE_NRDCYCLE_SHIFT); - putreg32(regval, SAM3U_SMCCS_CYCLE(2)); + putreg32(regval, SAM_SMCCS_CYCLE(2)); - regval = getreg32(SAM3U_SMCCS_MODE(2)); + regval = getreg32(SAM_SMCCS_MODE(2)); regval &= ~(SMCCS_MODE_DBW_MASK | SMCCS_MODE_PMEN); regval |= (SMCCS_MODE_READMODE) | (SMCCS_MODE_WRITEMODE) | (SMCCS_MODE_DBW_16BITS); - putreg32(regval, SAM3U_SMCCS_MODE(2)); + putreg32(regval, SAM_SMCCS_MODE(2)); regdbg("SMC SETUP[%08x]: %08x PULSE[%08x]: %08x\n", - SAM3U_SMCCS_SETUP(2), getreg32(SAM3U_SMCCS_SETUP(2)), - SAM3U_SMCCS_PULSE(2), getreg32(SAM3U_SMCCS_PULSE(2))); + SAM_SMCCS_SETUP(2), getreg32(SAM_SMCCS_SETUP(2)), + SAM_SMCCS_PULSE(2), getreg32(SAM_SMCCS_PULSE(2))); regdbg(" CYCLE[%08x]: %08x MODE[%08x]: %08x\n", - SAM3U_SMCCS_CYCLE(2), getreg32(SAM3U_SMCCS_CYCLE(2)), - SAM3U_SMCCS_MODE(2), getreg32(SAM3U_SMCCS_MODE(2))); + SAM_SMCCS_CYCLE(2), getreg32(SAM_SMCCS_CYCLE(2)), + SAM_SMCCS_MODE(2), getreg32(SAM_SMCCS_MODE(2))); /* Check HX8347 Chip ID */ @@ -989,7 +989,7 @@ int up_lcdinitialize(void) sam3u_putreg(HX8347_R09H, 0x3f); /* Row address end1 */ /* Display Setting */ - + sam3u_putreg(HX8347_R01H, 0x06); /* IDMON=0 INVON=1 NORON=1 PTLON=0 */ sam3u_putreg(HX8347_R16H, 0xc8); /* MY=1 MX=1 MV=0 BGR=1 */ sam3u_putreg(HX8347_R23H, 0x95); /* N_DC=1001 0101 */ @@ -1063,7 +1063,7 @@ void up_lcduninitialize(void) /* Disable SMC peripheral clock */ - putreg32((1 << SAM3U_PID_SMC), SAM3U_PMC_PCDR); + putreg32((1 << SAM_PID_SMC), SAM_PMC_PCDR); } diff --git a/nuttx/configs/sam3u-ek/src/up_mmcsd.c b/nuttx/configs/sam3u-ek/src/up_mmcsd.c index bfa4ce4a7..0ea8b9207 100644 --- a/nuttx/configs/sam3u-ek/src/up_mmcsd.c +++ b/nuttx/configs/sam3u-ek/src/up_mmcsd.c @@ -2,7 +2,7 @@ * configs/sam3u-ek/src/up_mmcsd.c * arch/arm/src/board/up_mmcsd.c * - * Copyright (C) 2010 Gregory Nutt. All rights reserved. + * Copyright (C) 2010, 2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without @@ -46,7 +46,7 @@ #include "sam3u_internal.h" #include "sam3uek_internal.h" -#ifdef CONFIG_SAM3U_HSMCI +#ifdef CONFIG_SAM34_HSMCI /************************************************************************************ * Definitions @@ -136,4 +136,4 @@ bool sam3u_writeprotected(unsigned char slot) return false; } -#endif /* CONFIG_SAM3U_HSMCI */ +#endif /* CONFIG_SAM34_HSMCI */ diff --git a/nuttx/configs/sam3u-ek/src/up_nsh.c b/nuttx/configs/sam3u-ek/src/up_nsh.c index 628405521..436704929 100644 --- a/nuttx/configs/sam3u-ek/src/up_nsh.c +++ b/nuttx/configs/sam3u-ek/src/up_nsh.c @@ -2,7 +2,7 @@ * config/sam3u-ek/src/up_nsh.c * arch/arm/src/board/up_nsh.c * - * Copyright (C) 2010 Gregory Nutt. All rights reserved. + * Copyright (C) 2010, 2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without @@ -51,7 +51,7 @@ #include "sam3u_internal.h" #include "sam3uek_internal.h" -#ifdef CONFIG_SAM3U_HSMCI +#ifdef CONFIG_SAM34_HSMCI /**************************************************************************** * Pre-Processor Definitions @@ -83,7 +83,7 @@ * is not enabled. */ -#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_SAM3U_HSMCI) +#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_SAM34_HSMCI) # undef NSH_HAVE_MMCSD #endif @@ -149,7 +149,7 @@ int nsh_archinitialize(void) return ret; } message("nsh_archinitialize: Successfully bound SDIO to the MMC/SD driver\n"); - + /* Then inform the HSMCI driver if there is or is not a card in the slot. */ sdio_mediachange(sdio, sam3u_cardinserted(0)); diff --git a/nuttx/configs/sam3u-ek/src/up_spi.c b/nuttx/configs/sam3u-ek/src/up_spi.c index 8dafc293e..a4b1881bc 100644 --- a/nuttx/configs/sam3u-ek/src/up_spi.c +++ b/nuttx/configs/sam3u-ek/src/up_spi.c @@ -2,7 +2,7 @@ * configs/sam3u-ek/src/up_spi.c * arch/arm/src/board/up_spi.c * - * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. + * Copyright (C) 2009, 2011, 2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without @@ -53,7 +53,7 @@ #include "sam3u_internal.h" #include "sam3uek_internal.h" -#ifdef CONFIG_SAM3U_SPI +#ifdef CONFIG_SAM34_SPI /************************************************************************************ * Definitions @@ -137,7 +137,7 @@ void weak_function sam3u_spiinitialize(void) * 3. Add a call to up_spiinitialize() in your low level application * initialization logic * 4. The handle returned by up_spiinitialize() may then be used to bind the - * SPI driver to higher level logic (e.g., calling + * SPI driver to higher level logic (e.g., calling * mmcsd_spislotinitialize(), for example, will bind the SPI driver to * the SPI MMC/SD driver). * @@ -240,4 +240,4 @@ uint8_t sam3u_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid) return 0; } -#endif /* CONFIG_SAM3U_SPI */ +#endif /* CONFIG_SAM34_SPI */ diff --git a/nuttx/configs/sam3u-ek/src/up_touchscreen.c b/nuttx/configs/sam3u-ek/src/up_touchscreen.c index 35ab43859..3157f7160 100644 --- a/nuttx/configs/sam3u-ek/src/up_touchscreen.c +++ b/nuttx/configs/sam3u-ek/src/up_touchscreen.c @@ -2,7 +2,7 @@ * configs/sam3u-ek/src/up_touchscreen.c * arch/arm/src/board/up_touchscreen.c * - * Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. + * Copyright (C) 2011-2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without @@ -63,8 +63,8 @@ # error "Touchscreen support requires CONFIG_INPUT" #endif -#ifndef CONFIG_SAM3U_SPI -# error "Touchscreen support requires CONFIG_SAM3U_SPI" +#ifndef CONFIG_SAM34_SPI +# error "Touchscreen support requires CONFIG_SAM34_SPI" #endif #ifndef CONFIG_GPIOA_IRQ @@ -154,22 +154,22 @@ static int tsc_attach(FAR struct ads7843e_config_s *state, xcpt_t isr) { /* Attach the ADS7843E interrupt */ - ivdbg("Attaching %p to IRQ %d\n", isr, SAM3U_TCS_IRQ); - return irq_attach(SAM3U_TCS_IRQ, isr); + ivdbg("Attaching %p to IRQ %d\n", isr, SAM_TCS_IRQ); + return irq_attach(SAM_TCS_IRQ, isr); } static void tsc_enable(FAR struct ads7843e_config_s *state, bool enable) { /* Attach and enable, or detach and disable */ - ivdbg("IRQ:%d enable:%d\n", SAM3U_TCS_IRQ, enable); + ivdbg("IRQ:%d enable:%d\n", SAM_TCS_IRQ, enable); if (enable) { - sam3u_gpioirqenable(SAM3U_TCS_IRQ); + sam3u_gpioirqenable(SAM_TCS_IRQ); } else { - sam3u_gpioirqdisable(SAM3U_TCS_IRQ); + sam3u_gpioirqdisable(SAM_TCS_IRQ); } } diff --git a/nuttx/configs/sam3u-ek/src/up_usbmsc.c b/nuttx/configs/sam3u-ek/src/up_usbmsc.c index dfe2e2c49..2bba22901 100644 --- a/nuttx/configs/sam3u-ek/src/up_usbmsc.c +++ b/nuttx/configs/sam3u-ek/src/up_usbmsc.c @@ -1,7 +1,7 @@ /**************************************************************************** * configs/sam3u-ek/src/up_usbmsc.c * - * Copyright (C) 2009 Gregory Nutt. All rights reserved. + * Copyright (C) 2009, 2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> * * Configure and register the SAM3U MMC/SD SDIO block driver. @@ -50,7 +50,7 @@ #include "sam3u_internal.h" -#ifdef CONFIG_SAM3U_SDIO +#ifdef CONFIG_SAM34_SDIO /**************************************************************************** * Pre-Processor Definitions @@ -65,8 +65,8 @@ /* SLOT number(s) could depend on the board configuration */ #ifdef CONFIG_ARCH_BOARD_SAM3U10E_EVAL -# undef SAM3U_MMCSDSLOTNO -# define SAM3U_MMCSDSLOTNO 0 +# undef SAM_MMCSDSLOTNO +# define SAM_MMCSDSLOTNO 0 #else /* Add configuration for new SAM3U boards here */ # error "Unrecognized SAM3U board" @@ -113,13 +113,13 @@ int usbmsc_archinitialize(void) message("usbmsc_archinitialize: " "Initializing SDIO slot %d\n", - SAM3U_MMCSDSLOTNO); + SAM_MMCSDSLOTNO); - sdio = sdio_initialize(SAM3U_MMCSDSLOTNO); + sdio = sdio_initialize(SAM_MMCSDSLOTNO); if (!sdio) { message("usbmsc_archinitialize: Failed to initialize SDIO slot %d\n", - SAM3U_MMCSDSLOTNO); + SAM_MMCSDSLOTNO); return -ENODEV; } @@ -139,7 +139,7 @@ int usbmsc_archinitialize(void) } message("usbmsc_archinitialize: " "Successfully bound SDIO to the MMC/SD driver\n"); - + /* Then let's guess and say that there is a card in the slot. I need to check to * see if the SAM3U10E-EVAL board supports a GPIO to detect if there is a card in * the slot. @@ -149,4 +149,4 @@ int usbmsc_archinitialize(void) return OK; } -#endif /* CONFIG_SAM3U_SDIO */ +#endif /* CONFIG_SAM34_SDIO */ diff --git a/nuttx/configs/sam3u-ek/touchscreen/appconfig b/nuttx/configs/sam3u-ek/touchscreen/appconfig deleted file mode 100644 index ccbdaeb28..000000000 --- a/nuttx/configs/sam3u-ek/touchscreen/appconfig +++ /dev/null @@ -1,49 +0,0 @@ -############################################################################ -# configs/sam3u-ek/touchscreen/appconfig -# -# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/nsh - -# The NSH application library - -CONFIGURED_APPS += system/readline -CONFIGURED_APPS += nshlib - -# The NX and NXHELLO examples configured as an NX built-in commands - -CONFIGURED_APPS += examples/nx -CONFIGURED_APPS += examples/nxhello -CONFIGURED_APPS += examples/touchscreen diff --git a/nuttx/configs/sam3u-ek/touchscreen/defconfig b/nuttx/configs/sam3u-ek/touchscreen/defconfig index 843ba06b4..e0c6e49f3 100755..100644 --- a/nuttx/configs/sam3u-ek/touchscreen/defconfig +++ b/nuttx/configs/sam3u-ek/touchscreen/defconfig @@ -1,241 +1,228 @@ -############################################################################ -# configs/sam3u-ek/touchscreen/defconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSPIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# Architecture Selection # -CONFIG_ARCH="arm" -CONFIG_ARCH_ARM=y -CONFIG_ARCH_CORTEXM3=y -CONFIG_ARCH_CHIP="sam3u" -CONFIG_ARCH_CHIP_AT91SAM3U4E=y -CONFIG_ARCH_BOARD="sam3u-ek" -CONFIG_ARCH_BOARD_SAM3UEK=y -CONFIG_BOARD_LOOPSPERMSEC=4768 -CONFIG_DRAM_SIZE=32768 -CONFIG_DRAM_START=0x20000000 -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_BOOTLOADER=n -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_BUTTONS=y -CONFIG_ARCH_CALIBRATION=n -CONFIG_ARCH_DMA=n +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y # -# Identify toolchain and linker options +# Build Setup # -CONFIG_SAM3U_CODESOURCERYW=n -CONFIG_SAM3U_CODESOURCERYL=n -CONFIG_SAM3U_DEVKITARM=n -CONFIG_SAM3U_BUILDROOT=y +# CONFIG_EXPERIMENTAL is not set +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set # -# Individual subsystems can be enabled: +# Build Configuration # -CONFIG_SAM3U_DMA=n -CONFIG_SAM3U_HSMCI=n -CONFIG_SAM3U_NAND=n -CONFIG_SAM3U_SPI=y -CONFIG_SAM3U_UART=y -CONFIG_SAM3U_USART0=n -CONFIG_SAM3U_USART1=n -CONFIG_SAM3U_USART2=n -CONFIG_SAM3U_USART3=n +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set # -# Some subsystems can be configured to operate in different ways.. -# The drivers need to know how to configure the subsystem. +# Binary Output Formats # +# CONFIG_RRLOAD_BINARY is not set +# CONFIG_INTELHEX_BINARY is not set +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y -CONFIG_GPIOA_IRQ=y -CONFIG_GPIOB_IRQ=n -CONFIG_GPIOC_IRQ=n -CONFIG_USART0_ISUART=y -CONFIG_USART1_ISUART=y -CONFIG_USART2_ISUART=y -CONFIG_USART3_ISUART=y +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set # -# SAM3U specific serial device driver settings +# Debug Options # -CONFIG_UART_SERIAL_CONSOLE=Y -CONFIG_USART0_SERIAL_CONSOLE=n -CONFIG_USART1_SERIAL_CONSOLE=n -CONFIG_USART2_SERIAL_CONSOLE=n -CONFIG_USART3_SERIAL_CONSOLE=n +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_SYMBOLS is not set -CONFIG_UART_TXBUFSIZE=256 -CONFIG_USART0_TXBUFSIZE=256 -CONFIG_USART1_TXBUFSIZE=256 -CONFIG_USART2_TXBUFSIZE=256 -CONFIG_USART3_TXBUFSIZE=256 +# +# System Type +# +# CONFIG_ARCH_8051 is not set +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" -CONFIG_UART_RXBUFSIZE=256 -CONFIG_USART0_RXBUFSIZE=256 -CONFIG_USART1_RXBUFSIZE=256 -CONFIG_USART2_RXBUFSIZE=256 -CONFIG_USART3_RXBUFSIZE=256 +# +# ARM Options +# +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +CONFIG_ARCH_CHIP_SAM34=y +# CONFIG_ARCH_CHIP_STM32 is not set +# CONFIG_ARCH_CHIP_STR71X is not set +CONFIG_ARCH_CORTEXM3=y +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="sam3u" +# CONFIG_ARMV7M_USEBASEPRI is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARMV7M_MPU is not set -CONFIG_UART_BAUD=115200 -CONFIG_USART0_BAUD=115200 -CONFIG_USART1_BAUD=115200 -CONFIG_USART2_BAUD=115200 -CONFIG_USART3_BAUD=115200 +# +# ARMV7M Configuration Options +# +CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set +CONFIG_ARMV7M_OABI_TOOLCHAIN=y -CONFIG_UART_BITS=8 -CONFIG_USART0_BITS=8 -CONFIG_USART1_BITS=8 -CONFIG_USART2_BITS=8 -CONFIG_USART3_BITS=8 +# +# AT91SAM3/SAM4 Configuration Options +# +CONFIG_ARCH_CHIP_AT91SAM3U4E=y +CONFIG_ARCH_CHIP_SAM3U=y -CONFIG_UART_PARITY=0 -CONFIG_USART0_PARITY=0 -CONFIG_USART1_PARITY=0 -CONFIG_USART2_PARITY=0 -CONFIG_USART3_PARITY=0 +# +# AT91SAM3 Peripheral Support +# +# CONFIG_SAM34_DMA is not set +# CONFIG_SAM34_NAND is not set +# CONFIG_SAM34_HSMCI is not set +CONFIG_SAM34_UART=y +# CONFIG_SAM34_USART0 is not set +# CONFIG_SAM34_USART1 is not set +# CONFIG_SAM34_USART2 is not set +# CONFIG_SAM34_USART3 is not set +CONFIG_SAM34_SPI=y -CONFIG_UART_2STOP=0 -CONFIG_USART0_2STOP=0 -CONFIG_USART1_2STOP=0 -CONFIG_USART2_2STOP=0 -CONFIG_USART3_2STOP=0 +# +# AT91SAM3 UART Configuration +# # -# Input device configuration +# AT91SAM3 GPIO Interrupt Configuration # -CONFIG_INPUT=y -CONFIG_INPUT_ADS7843E=y +CONFIG_GPIOA_IRQ=y +# CONFIG_GPIOB_IRQ is not set +# CONFIG_GPIOC_IRQ is not set # -# General build options +# External Memory Configuration # -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=n -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=y # -# General OS setup +# Architecture Options # -CONFIG_USER_ENTRYPOINT="nsh_main" -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_DEBUG_GRAPHICS=n -CONFIG_DEBUG_LCD=n -CONFIG_DEBUG_INPUT=n -CONFIG_MM_REGIONS=3 -CONFIG_ARCH_LOWPUTC=y -CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n -CONFIG_TASK_NAME_SIZE=0 -CONFIG_START_YEAR=2011 -CONFIG_START_MONTH=9 -CONFIG_START_DAY=30 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n -CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=n -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n -CONFIG_SDCLONE_DISABLE=y -CONFIG_SCHED_WORKQUEUE=y -CONFIG_SCHED_WORKPRIORITY=192 -CONFIG_SCHED_WORKPERIOD=50000 -CONFIG_SCHED_WORKSTACKSIZE=1024 -CONFIG_SIG_SIGWORK=17 -CONFIG_SCHED_WAITPID=y -CONFIG_SCHED_ATEXIT=n +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_HAVE_VFORK=y +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set # -# Settings for NXFLAT +# Board Settings # -CONFIG_NXFLAT=y -CONFIG_NXFLAT_DUMPBUFFER=n -CONFIG_SYMTAB_ORDEREDBYNAME=y +CONFIG_BOARD_LOOPSPERMSEC=4768 +# CONFIG_ARCH_CALIBRATION is not set +CONFIG_DRAM_START=0x20000000 +CONFIG_DRAM_SIZE=32768 +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 # -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. +# Boot options # -# There are certain dependency relationships in these -# features. +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + # -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. +# Board Selection # -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=n -CONFIG_DISABLE_ENVIRON=n -CONFIG_DISABLE_POLL=y +CONFIG_ARCH_BOARD_SAM3UEK=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="sam3u-ek" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_HAVE_BUTTONS=y +CONFIG_ARCH_BUTTONS=y +CONFIG_ARCH_HAVE_IRQBUTTONS=y +# CONFIG_ARCH_IRQBUTTONS is not set +CONFIG_NSH_MMCSDMINOR=0 # -# Misc libc settings +# Board-Specific Options # -CONFIG_NOPRINTF_FIELDWIDTH=n # -# Allow for architecture optimized implementations +# RTOS Features # -# The architecture can provide optimized versions of the -# following to improve system performance +# CONFIG_BOARD_INITIALIZE is not set +CONFIG_MSEC_PER_TICK=10 +CONFIG_RR_INTERVAL=200 +# CONFIG_SCHED_INSTRUMENTATION is not set +CONFIG_TASK_NAME_SIZE=0 +# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2011 +CONFIG_START_MONTH=9 +CONFIG_START_DAY=30 +CONFIG_DEV_CONSOLE=y +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +CONFIG_SCHED_WAITPID=y +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_ENVIRON is not set + # -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n +# Signal Numbers +# +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 +CONFIG_SIG_SIGWORK=17 # # Sizes of configurable things (0 disables) @@ -246,8 +233,6 @@ CONFIG_NPTHREAD_KEYS=4 CONFIG_NFILE_DESCRIPTORS=8 CONFIG_NFILE_STREAMS=8 CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=64 -CONFIG_NUNGET_CHARS=2 CONFIG_PREALLOC_MQ_MSGS=4 CONFIG_MQ_MAXMSGSIZE=32 CONFIG_MAX_WDOGPARMS=2 @@ -255,317 +240,529 @@ CONFIG_PREALLOC_WDOGS=4 CONFIG_PREALLOC_TIMERS=4 # -# Framebuffer driver options +# Stack and heap information # -CONFIG_FB_CMAP=n -CONFIG_FB_HWCURSOR=n -CONFIG_FB_HWCURSORIMAGE=n -#CONFIG_FB_HWCURSORSIZE -#CONFIG_FB_TRANSPARENCY +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 # -# Filesystem configuration +# Device Drivers # -CONFIG_FS_FAT=y -CONFIG_FS_ROMFS=n - -CONFIG_FS_FAT=y -CONFIG_FAT_LCNAMES=y -CONFIG_FAT_LFN=y -CONFIG_FAT_MAXFNAME=32 -CONFIG_FS_NXFFS=n -CONFIG_FS_ROMFS=n +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +CONFIG_SPI=y +# CONFIG_SPI_OWNBUS is not set +CONFIG_SPI_EXCHANGE=y +# CONFIG_SPI_CMDDATA is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_BCH is not set +CONFIG_INPUT=y +# CONFIG_INPUT_TSC2007 is not set +CONFIG_INPUT_ADS7843E=y +# CONFIG_ADS7843E_MULTIPLE is not set +CONFIG_ADS7843E_SPIDEV=0 +CONFIG_ADS7843E_DEVMINOR=0 +CONFIG_ADS7843E_SPIMODE=0 +CONFIG_ADS7843E_FREQUENCY=100000 +# CONFIG_ADS7843E_SWAPXY is not set +CONFIG_ADS7843E_THRESHX=12 +CONFIG_ADS7843E_THRESHY=12 +# CONFIG_INPUT_STMPE811 is not set +CONFIG_LCD=y # -# Maintain legacy build behavior (revisit) +# Common LCD Settings # +# CONFIG_LCD_NOGETRUN is not set +CONFIG_LCD_MAXCONTRAST=1 +CONFIG_LCD_MAXPOWER=31 -CONFIG_MMCSD=y -CONFIG_MMCSD_SPI=y -CONFIG_MMCSD_SDIO=y -CONFIG_MTD=y +# +# Graphic LCD Devices +# +# CONFIG_LCD_P14201 is not set +# CONFIG_LCD_NOKIA6100 is not set +# CONFIG_LCD_MIO283QT2 is not set +# CONFIG_LCD_UG9664HSWAG01 is not set +# CONFIG_LCD_ST7567 is not set +# CONFIG_LCD_UG2864AMBAG01 is not set +# CONFIG_LCD_SSD1289 is not set +# CONFIG_LCD_LANDSCAPE is not set +CONFIG_LCD_PORTRAIT=y +# CONFIG_LCD_RPORTRAIT is not set +# CONFIG_LCD_RLANDSCAPE is not set # -# SPI-based MMC/SD driver +# Alphanumeric/Segment LCD Devices # -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 +# CONFIG_LCD_LCD1602 is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_UART=y +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +CONFIG_UART_SERIAL_CONSOLE=y +# CONFIG_NO_SERIAL_CONSOLE is not set # -# Block driver buffering +# UART Configuration # -CONFIG_FS_READAHEAD=n -CONFIG_FS_WRITEBUFFER=n +CONFIG_UART_RXBUFSIZE=256 +CONFIG_UART_TXBUFSIZE=256 +CONFIG_UART_BAUD=115200 +CONFIG_UART_BITS=8 +CONFIG_UART_PARITY=0 +CONFIG_UART_2STOP=0 +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set # -# SDIO-based MMC/SD driver +# System Logging Device Options # -CONFIG_SDIO_DMA=n -CONFIG_SDIO_BLOCKSETUP=y -CONFIG_MMCSD_MMCSUPPORT=n -CONFIG_MMCSD_HAVECARDDETECT=n # -# TCP/IP and UDP support via uIP +# System Logging # -CONFIG_NET=n -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=0 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 -CONFIG_NET_TCP=n -CONFIG_NET_TCP_CONNS=40 -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=n -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=n -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n +# CONFIG_RAMLOG is not set # -# UIP Network Utilities +# Networking Support # -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 +# CONFIG_NET is not set # -# USB Device Configuration +# File Systems # -CONFIG_USBDEV=n -CONFIG_USBDEV_ISOCHRONOUS=n -CONFIG_USBDEV_DUALSPEED=n -CONFIG_USBDEV_SELFPOWERED=y -CONFIG_USBDEV_REMOTEWAKEUP=n -CONFIG_USBDEV_MAXPOWER=100 -CONFIG_USBDEV_TRACE=n -CONFIG_USBDEV_TRACE_NRECORDS=128 # -# USB Serial Device Configuration +# File system configuration # -CONFIG_PL2303=n -CONFIG_PL2303_EPINTIN=1 -CONFIG_PL2303_EPBULKOUT=2 -CONFIG_PL2303_EPBULKIN=3 -CONFIG_PL2303_NWRREQS=4 -CONFIG_PL2303_NRDREQS=4 -CONFIG_PL2303_VENDORID=0x067b -CONFIG_PL2303_PRODUCTID=0x2303 -CONFIG_PL2303_VENDORSTR="Nuttx" -CONFIG_PL2303_PRODUCTSTR="USBdev Serial" -CONFIG_PL2303_RXBUFSIZE=512 -CONFIG_PL2303_TXBUFSIZE=512 +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_FS_RAMMAP is not set +CONFIG_FS_FAT=y +CONFIG_FAT_LCNAMES=y +CONFIG_FAT_LFN=y +CONFIG_FAT_MAXFNAME=32 +# CONFIG_FS_FATTIME is not set +# CONFIG_FAT_DMAMEMORY is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_SMARTFS is not set +# CONFIG_FS_BINFS is not set # -# USB Storage Device Configuration +# System Logging # -CONFIG_USBMSC=n -CONFIG_USBMSC_EP0MAXPACKET=64 -CONFIG_USBMSC_EPBULKOUT=2 -CONFIG_USBMSC_EPBULKIN=5 -CONFIG_USBMSC_NRDREQS=2 -CONFIG_USBMSC_NWRREQS=2 -CONFIG_USBMSC_BULKINREQLEN=256 -CONFIG_USBMSC_BULKOUTREQLEN=256 -CONFIG_USBMSC_VENDORID=0x584e -CONFIG_USBMSC_VENDORSTR="NuttX" -CONFIG_USBMSC_PRODUCTID=0x5342 -CONFIG_USBMSC_PRODUCTSTR="USBdev Storage" -CONFIG_USBMSC_VERSIONNO=0x0399 -CONFIG_USBMSC_REMOVABLE=y +# CONFIG_SYSLOG_ENABLE is not set +# CONFIG_SYSLOG is not set # -# Graphics related configuration settings +# Graphics Support # CONFIG_NX=y -CONFIG_NX_MULTIUSER=n +CONFIG_NX_LCDDRIVER=y CONFIG_NX_NPLANES=1 +# CONFIG_NX_WRITEONLY is not set + +# +# Supported Pixel Depths +# CONFIG_NX_DISABLE_1BPP=y CONFIG_NX_DISABLE_2BPP=y CONFIG_NX_DISABLE_4BPP=y CONFIG_NX_DISABLE_8BPP=y -CONFIG_NX_DISABLE_16BPP=n +# CONFIG_NX_DISABLE_16BPP is not set CONFIG_NX_DISABLE_24BPP=y CONFIG_NX_DISABLE_32BPP=y -CONFIG_NX_PACKEDMSFIRST=n -CONFIG_NX_LCDDRIVER=y -CONFIG_LCD_MAXPOWER=31 -CONFIG_LCD_MAXCONTRAST=1 +# CONFIG_NX_PACKEDMSFIRST is not set + +# +# Input Devices +# CONFIG_NX_MOUSE=y CONFIG_NX_KBD=y -#CONFIG_NXTK_BORDERWIDTH=4 -#CONFIG_NXTK_BORDERCOLOR1 -#CONFIG_NXTK_BORDERCOLOR2 -CONFIG_NXTK_AUTORAISE=n -CONFIG_NXFONT_SANS23X27=y -CONFIG_NXFONTS_CHARBITS=7 -CONFIG_NX_BLOCKING=y -CONFIG_NX_MXSERVERMSGS=32 -CONFIG_NX_MXCLIENTMSGS=16 # -# SAM3U-EK LCD Hardware Configuration +# Framed Window Borders # -CONFIG_LCD_LANDSCAPE=n -CONFIG_LCD_PORTRAIT=y +CONFIG_NXTK_BORDERWIDTH=4 +CONFIG_NXTK_BORDERCOLOR1=0 +CONFIG_NXTK_BORDERCOLOR2=0 +CONFIG_NXTK_BORDERCOLOR3=0 +# CONFIG_NXTK_AUTORAISE is not set # -# Settings for examples/uip +# Font Selections # -CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002 -CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00 -CONFIG_EXAMPLES_UIP_DHCPC=n +CONFIG_NXFONTS_CHARBITS=7 +# CONFIG_NXFONT_MONO5X8 is not set +# CONFIG_NXFONT_SANS17X22 is not set +# CONFIG_NXFONT_SANS20X26 is not set +CONFIG_NXFONT_SANS23X27=y +# CONFIG_NXFONT_SANS22X29 is not set +# CONFIG_NXFONT_SANS28X37 is not set +# CONFIG_NXFONT_SANS39X48 is not set +# CONFIG_NXFONT_SANS17X23B is not set +# CONFIG_NXFONT_SANS20X27B is not set +# CONFIG_NXFONT_SANS22X29B is not set +# CONFIG_NXFONT_SANS28X37B is not set +# CONFIG_NXFONT_SANS40X49B is not set +# CONFIG_NXFONT_SERIF22X29 is not set +# CONFIG_NXFONT_SERIF29X37 is not set +# CONFIG_NXFONT_SERIF38X48 is not set +# CONFIG_NXFONT_SERIF22X28B is not set +# CONFIG_NXFONT_SERIF27X38B is not set +# CONFIG_NXFONT_SERIF38X49B is not set +# CONFIG_NXCONSOLE is not set # -# Settings for examples/nettest -CONFIG_EXAMPLES_NETTEST_SERVER=n -CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLES_NETTEST_NOMAC=n -CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002 -CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00 -CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001 +# NX Multi-user only options +# +# CONFIG_NX_MULTIUSER is not set # -# Settings for examples/ostest +# Memory Management # -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 +# CONFIG_MM_MULTIHEAP is not set +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=3 +# CONFIG_GRAN is not set + +# +# Audio Support +# +# CONFIG_AUDIO is not set # -# Settings for apps/nshlib +# Binary Formats # +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_BINFMT_EXEPATH is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set CONFIG_BUILTIN=y -CONFIG_NSH_BUILTIN_APPS=y -CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n -CONFIG_NSH_CONSOLE=y -#CONFIG_NSH_CONDEV="/dev/ttyS1" -CONFIG_NSH_TELNET=n -CONFIG_NSH_ARCHINIT=n -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=0x0a000002 -CONFIG_NSH_DRIPADDR=0x0a000001 -CONFIG_NSH_NETMASK=0xffffff00 -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT="/tmp" - -# -# Architecture-specific NSH options -# -CONFIG_NSH_MMCSDSPIPORTNO=0 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set # -# Settings for examples/usbserial +# Library Routines # -CONFIG_EXAMPLES_USBSERIAL_INONLY=n -CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n -CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n -CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n -CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n -CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n -CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set # -# Settings for examples/nx +# Non-standard Library Support # +CONFIG_SCHED_WORKQUEUE=y +CONFIG_SCHED_HPWORK=y +CONFIG_SCHED_WORKPRIORITY=192 +CONFIG_SCHED_WORKPERIOD=50000 +CONFIG_SCHED_WORKSTACKSIZE=1024 +# CONFIG_SCHED_LPWORK is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# +CONFIG_BUILTIN_PROXY_STACKSIZE=1024 + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_COMPOSITE is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NRF24L01TERM is not set +CONFIG_EXAMPLES_NSH=y +# CONFIG_EXAMPLES_NULL is not set +CONFIG_EXAMPLES_NX=y CONFIG_EXAMPLES_NX_BUILTIN=y CONFIG_EXAMPLES_NX_VPLANE=0 CONFIG_EXAMPLES_NX_DEVNO=0 +# CONFIG_EXAMPLES_NX_DEFAULT_COLORS is not set CONFIG_EXAMPLES_NX_BGCOLOR=0x7b5d CONFIG_EXAMPLES_NX_COLOR1=0xe73f CONFIG_EXAMPLES_NX_COLOR2=0xdefb CONFIG_EXAMPLES_NX_TBCOLOR=0xad55 CONFIG_EXAMPLES_NX_FONTCOLOR=0x0000 +CONFIG_EXAMPLES_NX_DEFAULT_FONT=y CONFIG_EXAMPLES_NX_BPP=16 -CONFIG_EXAMPLES_NX_RAWWINDOWS=n -CONFIG_EXAMPLES_NX_STACKSIZE=2048 -CONFIG_EXAMPLES_NX_CLIENTPRIO=80 -CONFIG_EXAMPLES_NX_SERVERPRIO=120 -CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4 +# CONFIG_EXAMPLES_NX_RAWWINDOWS is not set +# CONFIG_EXAMPLES_NX_EXTERNINIT is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +CONFIG_EXAMPLES_NXHELLO=y +CONFIG_EXAMPLES_NXHELLO_VPLANE=0 +CONFIG_EXAMPLES_NXHELLO_DEVNO=0 +CONFIG_EXAMPLES_NXHELLO_BPP=16 # -# Settings for examples/nxhello +# Example Color Configuration # -CONFIG_EXAMPLES_NXHELLO_BUILTIN=y -CONFIG_EXAMPLES_NXHELLO_VPLANE=0 -CONFIG_EXAMPLES_NXHELLO_DEVNO=0 +# CONFIG_EXAMPLES_NXHELLO_DEFAULT_COLORS is not set CONFIG_EXAMPLES_NXHELLO_BGCOLOR=0x0011 -CONFIG_EXAMPLES_NXHELLO_FONTID=6 CONFIG_EXAMPLES_NXHELLO_FONTCOLOR=0xffdf -CONFIG_EXAMPLES_NXHELLO_BPP=16 -CONFIG_EXAMPLES_NXHELLO_EXTERNINIT=n # -# Settings for examples/nximage +# Example Font Configuration # -CONFIG_EXAMPLES_NXIMAGE_BUILTIN=y -CONFIG_EXAMPLES_NXIMAGE_VPLANE=0 -CONFIG_EXAMPLES_NXIMAGE_DEVNO=0 -CONFIG_EXAMPLES_NXIMAGE_BPP=16 -CONFIG_EXAMPLES_NXIMAGE_XSCALEp5=n -CONFIG_EXAMPLES_NXIMAGE_XSCALE1p5=y -CONFIG_EXAMPLES_NXIMAGE_XSCALE2p0=n -CONFIG_EXAMPLES_NXIMAGE_YSCALEp5=n -CONFIG_EXAMPLES_NXIMAGE_YSCALE1p5=y -CONFIG_EXAMPLES_NXIMAGE_YSCALE2p0=n -CONFIG_EXAMPLES_NXIMAGE_EXTERNINIT=n +# CONFIG_EXAMPLES_NXHELLO_DEFAULT_FONT is not set +CONFIG_EXAMPLES_NXHELLO_FONTID=6 +# CONFIG_EXAMPLES_NXHELLO_EXTERNINIT is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART_TEST is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +CONFIG_EXAMPLES_TOUCHSCREEN=y +CONFIG_EXAMPLES_TOUCHSCREEN_MINOR=0 +CONFIG_EXAMPLES_TOUCHSCREEN_DEVPATH="/dev/input0" +CONFIG_EXAMPLES_TOUCHSCREEN_NSAMPLES=25 +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set # -# Settings for examples/nxlines +# Graphics Support # -CONFIG_EXAMPLES_NXLINES_VPLANE=0 -CONFIG_EXAMPLES_NXLINES_DEVNO=0 -CONFIG_EXAMPLES_NXLINES_BGCOLOR=0x0320 -CONFIG_EXAMPLES_NXLINES_LINEWIDTH=16 -CONFIG_EXAMPLES_NXLINES_LINECOLOR=0xffe0 -CONFIG_EXAMPLES_NXLINES_BORDERWIDTH=4 -CONFIG_EXAMPLES_NXLINES_BORDERCOLOR=0xffe0 -CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR=0xf7bb -CONFIG_EXAMPLES_NXLINES_BPP=16 -CONFIG_EXAMPLES_NXLINES_EXTERNINIT=n +# CONFIG_TIFF is not set # -# Settings for examples/touchscreen +# Interpreters # -CONFIG_EXAMPLES_TOUCHSCREEN_BUILTIN=y -CONFIG_EXAMPLES_TOUCHSCREEN_MINOR=0 -CONFIG_EXAMPLES_TOUCHSCREEN_DEVPATH="/dev/input0" -CONFIG_EXAMPLES_TOUCHSCREEN_NSAMPLES=25 +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # -# Stack and heap information +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_RESOLV is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y +CONFIG_NSH_BUILTIN_APPS=y + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKFATFS is not set +# CONFIG_NSH_DISABLE_MKFIFO is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MW is not set +# CONFIG_NSH_DISABLE_NSFMOUNT is not set +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PING is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set + +# +# Configure Command Options +# +# CONFIG_NSH_CMDOPT_DF_H is not set +CONFIG_NSH_CODECS_BUFSIZE=128 +CONFIG_NSH_FILEIOSIZE=512 +CONFIG_NSH_LINELEN=64 +CONFIG_NSH_NESTDEPTH=3 +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLEBG is not set +CONFIG_NSH_CONSOLE=y + +# +# USB Trace Support +# +# CONFIG_NSH_CONDEV is not set +# CONFIG_NSH_ARCHINIT is not set + +# +# NxWidgets/NxWM +# + +# +# System NSH Add-Ons +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# FLASH Erase-all Command +# + +# +# readline() +# +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set + +# +# USB Monitor # -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 |