diff options
Diffstat (limited to 'nuttx/configs/sama5d3x-ek')
| -rw-r--r-- | nuttx/configs/sama5d3x-ek/README.txt | 60 | ||||
| -rw-r--r-- | nuttx/configs/sama5d3x-ek/ostest/Make.defs | 146 | ||||
| -rw-r--r-- | nuttx/configs/sama5d3x-ek/ostest/defconfig | 646 | ||||
| -rwxr-xr-x | nuttx/configs/sama5d3x-ek/ostest/setenv.sh | 76 |
4 files changed, 0 insertions, 928 deletions
diff --git a/nuttx/configs/sama5d3x-ek/README.txt b/nuttx/configs/sama5d3x-ek/README.txt index 42894e1e2..8a5435aec 100644 --- a/nuttx/configs/sama5d3x-ek/README.txt +++ b/nuttx/configs/sama5d3x-ek/README.txt @@ -2675,10 +2675,6 @@ Configurations UnitTest. It integrates support for both the SAMA5 LCDC and the SAMA5 ADC touchscreen controller and provides a more advance graphics demo. It provides an interactive windowing experience. - ostest: This is another configuration that is only useful for bring-up. - It executes an exhaustive OS test to verify a correct port of NuttX - to the SAMA5D3-EK. Since it now passes that test, the configuration - has little further use other than for reference. ov2640: A test of the SAMA5 ISI using an OV2640 camera. There may be issues with some of these configurations. See the details @@ -3069,62 +3065,6 @@ Configurations Bottom line: Not ready for prime time. - ostest: - - This configuration directory, performs a simple OS test using - examples/ostest. - - NOTES: - - 1. This configuration uses the default USART1 serial console. That - is easily changed by reconfiguring to (1) enable a different - serial peripheral, and (2) selecting that serial peripheral as - the console device. - - 2. By default, this configuration is set up to build on Windows - under either a Cygwin or MSYS environment using a recent, Windows- - native, generic ARM EABI GCC toolchain (such as the CodeSourcery - toolchain). Both the build environment and the toolchain - selection can easily be changed by reconfiguring: - - CONFIG_HOST_WINDOWS=y : Windows operating system - CONFIG_WINDOWS_CYGWIN=y : POSIX environment under windows - CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows - - If you are running on Linux, make *certain* that you have - CONFIG_HOST_LINUX=y *before* the first make or you will create a - corrupt configuration that may not be easy to recover from. See - the warning in the section "Information Common to All Configurations" - for further information. - - 3. This configuration executes out of CS0 NOR flash and can only - be loaded via SAM-BA. These are the relevant configuration options - the define the NOR FLASH configuration: - - CONFIG_SAMA5_BOOT_CS0FLASH=y : Boot from FLASH on CS0 - CONFIG_BOOT_RUNFROMFLASH=y : Run in place on FLASH (vs copying to RAM) - - CONFIG_SAMA5_EBICS0=y : Enable CS0 external memory - CONFIG_SAMA5_EBICS0_SIZE=134217728 : Memory size is 128KB - CONFIG_SAMA5_EBICS0_NOR=y : Memory type is NOR FLASH - - CONFIG_FLASH_START=0x10000000 : Physical FLASH start address - CONFIG_FLASH_VSTART=0x10000000 : Virtual FLASH start address - CONFIG_FLASH_SIZE=134217728 : FLASH size (again) - - CONFIG_RAM_START=0x00300400 : Data stored after page table - CONFIG_RAM_VSTART=0x00300400 - CONFIG_RAM_SIZE=114688 : Available size of 128KB - 16KB for page table - - NOTE: In order to boot in this configuration, you need to close the - BMS jumper. - - 4. Data resides in ISRAM, but can be moved to SDRAM as described above - under "SDRAM Data Configuration." - - STATUS: - See the To-Do list below - ov2640: A test of the SAMA5 ISI using an OV2640 camera. diff --git a/nuttx/configs/sama5d3x-ek/ostest/Make.defs b/nuttx/configs/sama5d3x-ek/ostest/Make.defs deleted file mode 100644 index b10782dda..000000000 --- a/nuttx/configs/sama5d3x-ek/ostest/Make.defs +++ /dev/null @@ -1,146 +0,0 @@ -############################################################################ -# configs/sama5d3x-ek/ostest/Make.defs -# -# Copyright (C) 2013-2014 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -include ${TOPDIR}/.config -include ${TOPDIR}/tools/Config.mk -include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolchain.defs - -ifeq ($(CONFIG_SAMA5_BOOT_ISRAM),y) - LDSCRIPT = isram.ld -endif - -ifeq ($(CONFIG_SAMA5_BOOT_SDRAM),y) - LDSCRIPT = ddram.ld -endif - -ifeq ($(CONFIG_SAMA5_BOOT_CS0FLASH),y) -ifeq ($(CONFIG_BOOT_SDRAM_DATA),y) - LDSCRIPT = nor-ddram.ld -else - LDSCRIPT = nor-isram.ld -endif -endif - -ifeq ($(CONFIG_SAMA5_BOOT_CS1FLASH),y) -# LDSCRIPT = cs1flash.ld -endif - -ifeq ($(CONFIG_SAMA5_BOOT_CS2FLASH),y) -# LDSCRIPT = cs2flash.ld -endif - -ifeq ($(CONFIG_SAMA5_BOOT_CS3FLASH),y) -# LDSCRIPT = cs3flash.ld -endif - -ifeq ($(WINTOOL),y) - # Windows-native toolchains - ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" - ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)}" -else - # Linux/Cygwin-native toolchain - ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include - ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx - ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT) -endif - -CC = $(CROSSDEV)gcc -CXX = $(CROSSDEV)g++ -CPP = $(CROSSDEV)gcc -E -LD = $(CROSSDEV)ld -AR = $(ARCROSSDEV)ar rcs -NM = $(ARCROSSDEV)nm -OBJCOPY = $(CROSSDEV)objcopy -OBJDUMP = $(CROSSDEV)objdump - -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - ARCHOPTIMIZATION = -g -endif - -ifneq ($(CONFIG_DEBUG_NOOPT),y) - ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer -endif - -ARCHCPUFLAGS = -mcpu=cortex-a5 -mfpu=vfpv4-d16 -ARCHCFLAGS = -fno-builtin -ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti -ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -ARCHWARNINGSXX = -Wall -Wshadow -ARCHDEFINES = -ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 - -CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) -CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) -CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -AFLAGS = $(CFLAGS) -D__ASSEMBLY__ - -NXFLATLDFLAGS1 = -r -d -warn-common -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)$(DELIM)binfmt$(DELIM)libnxflat$(DELIM)gnu-nxflat-pcrel.ld -no-check-sections -LDNXFLATFLAGS = -e main -s 2048 - -OBJEXT = .o -LIBEXT = .a -EXEEXT = - -ifneq ($(CROSSDEV),arm-nuttx-elf-) - LDFLAGS += -nostartfiles -nodefaultlibs -endif -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - LDFLAGS += -g -endif - -HOSTCC = gcc -HOSTINCLUDES = -I. -HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe -HOSTLDFLAGS = -ifeq ($(CONFIG_HOST_WINDOWS),y) - HOSTEXEEXT = .exe -else - HOSTEXEEXT = -endif - -ifeq ($(WINTOOL),y) - # Windows-native host tools - DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh - DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh - MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh -else - # Linux/Cygwin-native host tools - MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkdeps$(HOSTEXEEXT) -endif - diff --git a/nuttx/configs/sama5d3x-ek/ostest/defconfig b/nuttx/configs/sama5d3x-ek/ostest/defconfig deleted file mode 100644 index 12bfe3431..000000000 --- a/nuttx/configs/sama5d3x-ek/ostest/defconfig +++ /dev/null @@ -1,646 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Nuttx/ Configuration -# -CONFIG_NUTTX_NEWCONFIG=y - -# -# Build Setup -# -# CONFIG_EXPERIMENTAL is not set -# CONFIG_HOST_LINUX is not set -# CONFIG_HOST_OSX is not set -CONFIG_HOST_WINDOWS=y -# CONFIG_HOST_OTHER is not set -# CONFIG_WINDOWS_NATIVE is not set -CONFIG_WINDOWS_CYGWIN=y -# CONFIG_WINDOWS_MSYS is not set -# CONFIG_WINDOWS_OTHER is not set - -# -# Build Configuration -# -# CONFIG_APPS_DIR="../apps" -# CONFIG_BUILD_2PASS is not set - -# -# Binary Output Formats -# -# CONFIG_RRLOAD_BINARY is not set -CONFIG_INTELHEX_BINARY=y -# CONFIG_MOTOROLA_SREC is not set -CONFIG_RAW_BINARY=y - -# -# Customize Header Files -# -# CONFIG_ARCH_STDBOOL_H is not set -# CONFIG_ARCH_MATH_H is not set -# CONFIG_ARCH_FLOAT_H is not set -# CONFIG_ARCH_STDARG_H is not set - -# -# Debug Options -# -# CONFIG_DEBUG is not set -# CONFIG_DEBUG_SYMBOLS is not set - -# -# System Type -# -# CONFIG_ARCH_8051 is not set -CONFIG_ARCH_ARM=y -# CONFIG_ARCH_AVR is not set -# CONFIG_ARCH_HC is not set -# CONFIG_ARCH_MIPS is not set -# CONFIG_ARCH_RGMP is not set -# CONFIG_ARCH_SH is not set -# CONFIG_ARCH_SIM is not set -# CONFIG_ARCH_X86 is not set -# CONFIG_ARCH_Z16 is not set -# CONFIG_ARCH_Z80 is not set -CONFIG_ARCH="arm" - -# -# ARM Options -# -# CONFIG_ARCH_CHIP_C5471 is not set -# CONFIG_ARCH_CHIP_CALYPSO is not set -# CONFIG_ARCH_CHIP_DM320 is not set -# CONFIG_ARCH_CHIP_IMX is not set -# CONFIG_ARCH_CHIP_KINETIS is not set -# CONFIG_ARCH_CHIP_KL is not set -# CONFIG_ARCH_CHIP_LM is not set -# CONFIG_ARCH_CHIP_LPC17XX is not set -# CONFIG_ARCH_CHIP_LPC214X is not set -# CONFIG_ARCH_CHIP_LPC2378 is not set -# CONFIG_ARCH_CHIP_LPC31XX is not set -# CONFIG_ARCH_CHIP_LPC43XX is not set -# CONFIG_ARCH_CHIP_NUC1XX is not set -CONFIG_ARCH_CHIP_SAMA5=y -# CONFIG_ARCH_CHIP_SAM34 is not set -# CONFIG_ARCH_CHIP_STM32 is not set -# CONFIG_ARCH_CHIP_STR71X is not set -# CONFIG_ARCH_ARM7TDMI is not set -# CONFIG_ARCH_ARM926EJS is not set -# CONFIG_ARCH_ARM920T is not set -# CONFIG_ARCH_CORTEXM0 is not set -# CONFIG_ARCH_CORTEXM3 is not set -# CONFIG_ARCH_CORTEXM4 is not set -CONFIG_ARCH_CORTEXA5=y -# CONFIG_ARCH_CORTEXA8 is not set -CONFIG_ARCH_FAMILY="armv7-a" -CONFIG_ARCH_CHIP="sama5" -CONFIG_ARCH_HAVE_FPU=y -CONFIG_ARCH_FPU=y -# CONFIG_ARCH_HAVE_MPU is not set -CONFIG_ARCH_HAVE_LOWVECTORS=y -CONFIG_ARCH_LOWVECTORS=y -CONFIG_PGTABLE_VADDR=0x20000000 -# CONFIG_ARCH_ROMPGTABLE is not set -# CONFIG_PAGING is not set - -# -# ARMv7-A Configuration Options -# -# CONFIG_ARMV7A_TOOLCHAIN_BUILDROOT is not set -CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y -# CONFIG_ARMV7A_TOOLCHAIN_DEVKITARM is not set -# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIL is not set -# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIW is not set -# CONFIG_ARMV7A_TOOLCHAIN_GNU_OABI is not set - -# -# ATSAMA5 Configuration Options -# -# CONFIG_ARCH_CHIP_ATSAMA5D31 is not set -CONFIG_ARCH_CHIP_ATSAMA5D33=y -# CONFIG_ARCH_CHIP_ATSAMA5D34 is not set -# CONFIG_ARCH_CHIP_ATSAMA5D35 is not set - -# -# ATSAMA5 Peripheral Support -# -# CONFIG_SAMA5_DBGU is not set -# CONFIG_SAMA5_PIT is not set -# CONFIG_SAMA5_WDT is not set -CONFIG_SAMA5_HSMC=y -# CONFIG_SAMA5_SMD is not set -# CONFIG_SAMA5_UART0 is not set -# CONFIG_SAMA5_UART1 is not set -# CONFIG_SAMA5_USART0 is not set -CONFIG_SAMA5_USART1=y -# CONFIG_SAMA5_USART2 is not set -# CONFIG_SAMA5_USART3 is not set -# CONFIG_SAMA5_TWI0 is not set -# CONFIG_SAMA5_TWI1 is not set -# CONFIG_SAMA5_TWI2 is not set -# CONFIG_SAMA5_HSMCI0 is not set -# CONFIG_SAMA5_HSMCI1 is not set -# CONFIG_SAMA5_HSMCI2 is not set -# CONFIG_SAMA5_SPI0 is not set -# CONFIG_SAMA5_SPI1 is not set -# CONFIG_SAMA5_TC0 is not set -# CONFIG_SAMA5_TC1 is not set -# CONFIG_SAMA5_PWM is not set -# CONFIG_SAMA5_ADC is not set -# CONFIG_SAMA5_DMAC0 is not set -# CONFIG_SAMA5_DMAC1 is not set -# CONFIG_SAMA5_UHPHS is not set -# CONFIG_SAMA5_UDPHS is not set -# CONFIG_SAMA5_GMAC is not set -# CONFIG_SAMA5_LCDC is not set -# CONFIG_SAMA5_ISI is not set -# CONFIG_SAMA5_SSC0 is not set -# CONFIG_SAMA5_SSC1 is not set -# CONFIG_SAMA5_CAN0 is not set -# CONFIG_SAMA5_CAN1 is not set -# CONFIG_SAMA5_SHA is not set -# CONFIG_SAMA5_AES is not set -# CONFIG_SAMA5_TDES is not set -# CONFIG_SAMA5_TRNG is not set -# CONFIG_SAMA5_ARM is not set -# CONFIG_SAMA5_FUSE is not set -# CONFIG_SAMA5_MPDDRC is not set -# CONFIG_SAMA5_PIO_IRQ is not set -CONFIG_SAMA5_HAVE_GMAC=y -# CONFIG_SAMA5_HAVE_EMAC is not set - -# -# External Memory Configuration -# -CONFIG_SAMA5_EBICS0=y -CONFIG_SAMA5_EBICS0_SIZE=134217728 -# CONFIG_SAMA5_EBICS0_SRAM is not set -# CONFIG_SAMA5_EBICS0_PSRAM is not set -# CONFIG_SAMA5_EBICS0_PROM is not set -# CONFIG_SAMA5_EBICS0_EEPROM is not set -# CONFIG_SAMA5_EBICS0_EPROM is not set -# CONFIG_SAMA5_EBICS0_LCD is not set -CONFIG_SAMA5_EBICS0_NOR=y -# CONFIG_SAMA5_EBICS0_NAND is not set -# CONFIG_SAMA5_EBICS1 is not set -# CONFIG_SAMA5_EBICS2 is not set -# CONFIG_SAMA5_EBICS3 is not set -# CONFIG_SAMA5_BOOT_ISRAM is not set -CONFIG_SAMA5_BOOT_CS0FLASH=y - -# -# Heap Configuration -# -CONFIG_SAMA5_ISRAM_HEAP=y - -# -# Architecture Options -# -# CONFIG_ARCH_NOINTC is not set -# CONFIG_ARCH_VECNOTIRQ is not set -# CONFIG_ARCH_DMA is not set -CONFIG_ARCH_IRQPRIO=y -# CONFIG_CUSTOM_STACK is not set -# CONFIG_ADDRENV is not set -CONFIG_ARCH_HAVE_VFORK=y -CONFIG_ARCH_HAVE_MMU=y -CONFIG_ARCH_STACKDUMP=y -# CONFIG_ENDIAN_BIG is not set -# CONFIG_ARCH_HAVE_RAMFUNCS is not set -# CONFIG_ARCH_HAVE_RAMVECTORS is not set - -# -# Board Settings -# -CONFIG_BOARD_LOOPSPERMSEC=49341 -# CONFIG_ARCH_CALIBRATION is not set -CONFIG_ARCH_HAVE_INTERRUPTSTACK=y -CONFIG_ARCH_INTERRUPTSTACK=0 - -# -# Boot options -# -# CONFIG_BOOT_RUNFROMEXTSRAM is not set -CONFIG_BOOT_RUNFROMFLASH=y -# CONFIG_BOOT_RUNFROMISRAM is not set -# CONFIG_BOOT_RUNFROMSDRAM is not set -# CONFIG_BOOT_COPYTORAM is not set - -# -# Boot Memory Configuration -# -CONFIG_RAM_START=0x00304000 -CONFIG_RAM_VSTART=0x00304000 -CONFIG_RAM_SIZE=114688 -CONFIG_FLASH_START=0x10000000 -CONFIG_FLASH_VSTART=0x10000000 -CONFIG_FLASH_SIZE=134217728 - -# -# Board Selection -# -CONFIG_ARCH_BOARD_SAMA5D3X_EK=y -# CONFIG_ARCH_BOARD_CUSTOM is not set -CONFIG_ARCH_BOARD="sama5d3x-ek" - -# -# Common Board Options -# -CONFIG_ARCH_HAVE_LEDS=y -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_HAVE_BUTTONS=y -# CONFIG_ARCH_BUTTONS is not set -CONFIG_ARCH_HAVE_IRQBUTTONS=y - -# -# Board-Specific Options -# - -# -# RTOS Features -# -# CONFIG_BOARD_INITIALIZE is not set -CONFIG_MSEC_PER_TICK=10 -CONFIG_RR_INTERVAL=200 -# CONFIG_SCHED_INSTRUMENTATION is not set -CONFIG_TASK_NAME_SIZE=0 -# CONFIG_SCHED_HAVE_PARENT is not set -# CONFIG_JULIAN_TIME is not set -CONFIG_START_YEAR=2013 -CONFIG_START_MONTH=7 -CONFIG_START_DAY=19 -CONFIG_DEV_CONSOLE=y -# CONFIG_MUTEX_TYPES is not set -# CONFIG_PRIORITY_INHERITANCE is not set -# CONFIG_FDCLONE_DISABLE is not set -# CONFIG_FDCLONE_STDIO is not set -CONFIG_SDCLONE_DISABLE=y -CONFIG_SCHED_WAITPID=y -# CONFIG_SCHED_STARTHOOK is not set -# CONFIG_SCHED_ATEXIT is not set -# CONFIG_SCHED_ONEXIT is not set -CONFIG_USER_ENTRYPOINT="ostest_main" -CONFIG_DISABLE_OS_API=y -# CONFIG_DISABLE_CLOCK is not set -# CONFIG_DISABLE_POSIX_TIMERS is not set -# CONFIG_DISABLE_PTHREAD is not set -# CONFIG_DISABLE_SIGNALS is not set -# CONFIG_DISABLE_MQUEUE is not set -CONFIG_DISABLE_ENVIRON=y - -# -# Signal Numbers -# -CONFIG_SIG_SIGUSR1=1 -CONFIG_SIG_SIGUSR2=2 -CONFIG_SIG_SIGALARM=3 -CONFIG_SIG_SIGCONDTIMEDOUT=16 - -# -# Sizes of configurable things (0 disables) -# -CONFIG_MAX_TASKS=16 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=4 -CONFIG_NFILE_DESCRIPTORS=8 -CONFIG_NFILE_STREAMS=8 -CONFIG_NAME_MAX=32 -CONFIG_PREALLOC_MQ_MSGS=4 -CONFIG_MQ_MAXMSGSIZE=32 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=4 -CONFIG_PREALLOC_TIMERS=4 - -# -# Stack and heap information -# -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 - -# -# Device Drivers -# -CONFIG_DISABLE_POLL=y -CONFIG_DEV_NULL=y -# CONFIG_DEV_ZERO is not set -# CONFIG_LOOP is not set -# CONFIG_RAMDISK is not set -# CONFIG_CAN is not set -# CONFIG_PWM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -# CONFIG_RTC is not set -# CONFIG_WATCHDOG is not set -# CONFIG_ANALOG is not set -# CONFIG_AUDIO_DEVICES is not set -# CONFIG_BCH is not set -# CONFIG_INPUT is not set -# CONFIG_LCD is not set -# CONFIG_MMCSD is not set -# CONFIG_MTD is not set -# CONFIG_PIPES is not set -# CONFIG_PM is not set -# CONFIG_POWER is not set -# CONFIG_SENSORS is not set -CONFIG_SERIAL=y -CONFIG_DEV_LOWCONSOLE=y -# CONFIG_16550_UART is not set -CONFIG_ARCH_HAVE_USART1=y - -# -# USART Configuration -# -CONFIG_USART1_ISUART=y -CONFIG_MCU_SERIAL=y -CONFIG_USART1_SERIAL_CONSOLE=y -# CONFIG_NO_SERIAL_CONSOLE is not set - -# -# USART1 Configuration -# -CONFIG_USART1_RXBUFSIZE=256 -CONFIG_USART1_TXBUFSIZE=256 -CONFIG_USART1_BAUD=115200 -CONFIG_USART1_BITS=8 -CONFIG_USART1_PARITY=0 -CONFIG_USART1_2STOP=0 -# CONFIG_USART1_IFLOWCONTROL is not set -# CONFIG_USART1_OFLOWCONTROL is not set -# CONFIG_SERIAL_IFLOWCONTROL is not set -# CONFIG_SERIAL_OFLOWCONTROL is not set -# CONFIG_USBDEV is not set -# CONFIG_USBHOST is not set -# CONFIG_WIRELESS is not set - -# -# System Logging Device Options -# - -# -# System Logging -# -# CONFIG_RAMLOG is not set - -# -# Networking Support -# -# CONFIG_NET is not set - -# -# File Systems -# - -# -# File system configuration -# -CONFIG_DISABLE_MOUNTPOINT=y -# CONFIG_FS_RAMMAP is not set - -# -# System Logging -# -# CONFIG_SYSLOG_ENABLE is not set -# CONFIG_SYSLOG is not set - -# -# Graphics Support -# -# CONFIG_NX is not set - -# -# Memory Management -# -# CONFIG_MM_MULTIHEAP is not set -# CONFIG_MM_SMALL is not set -CONFIG_MM_REGIONS=1 -# CONFIG_GRAN is not set - -# -# Audio Support -# -# CONFIG_AUDIO is not set - -# -# Binary Formats -# -# CONFIG_BINFMT_DISABLE is not set -# CONFIG_NXFLAT is not set -# CONFIG_ELF is not set -# CONFIG_BUILTIN is not set -# CONFIG_PIC is not set -CONFIG_SYMTAB_ORDEREDBYNAME=y - -# -# Library Routines -# - -# -# Standard C Library Options -# -CONFIG_STDIO_BUFFER_SIZE=64 -CONFIG_STDIO_LINEBUFFER=y -CONFIG_NUNGET_CHARS=2 -# CONFIG_LIBM is not set -# CONFIG_NOPRINTF_FIELDWIDTH is not set -# CONFIG_LIBC_FLOATINGPOINT is not set -CONFIG_LIB_RAND_ORDER=1 -# CONFIG_EOL_IS_CR is not set -# CONFIG_EOL_IS_LF is not set -# CONFIG_EOL_IS_BOTH_CRLF is not set -CONFIG_EOL_IS_EITHER_CRLF=y -# CONFIG_LIBC_EXECFUNCS is not set -CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 -CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 -# CONFIG_LIBC_STRERROR is not set -# CONFIG_LIBC_PERROR_STDOUT is not set -CONFIG_ARCH_LOWPUTC=y -CONFIG_LIB_SENDFILE_BUFSIZE=512 -# CONFIG_ARCH_ROMGETC is not set -# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set - -# -# Non-standard Library Support -# -# CONFIG_SCHED_WORKQUEUE is not set -# CONFIG_LIB_KBDCODEC is not set -# CONFIG_LIB_SLCDCODEC is not set - -# -# Basic CXX Support -# -# CONFIG_C99_BOOL8 is not set -# CONFIG_HAVE_CXX is not set - -# -# Application Configuration -# - -# -# Built-In Applications -# - -# -# Examples -# -# CONFIG_EXAMPLES_BUTTONS is not set -# CONFIG_EXAMPLES_CAN is not set -# CONFIG_SYSTEM_COMPOSITE is not set -# CONFIG_EXAMPLES_DHCPD is not set -# CONFIG_EXAMPLES_ELF is not set -# CONFIG_EXAMPLES_FTPC is not set -# CONFIG_EXAMPLES_FTPD is not set -# CONFIG_EXAMPLES_HELLO is not set -# CONFIG_EXAMPLES_HELLOXX is not set -# CONFIG_EXAMPLES_JSON is not set -# CONFIG_EXAMPLES_HIDKBD is not set -# CONFIG_EXAMPLES_KEYPADTEST is not set -# CONFIG_EXAMPLES_IGMP is not set -# CONFIG_EXAMPLES_LCDRW is not set -# CONFIG_EXAMPLES_MM is not set -# CONFIG_EXAMPLES_MODBUS is not set -# CONFIG_EXAMPLES_MOUNT is not set -# CONFIG_EXAMPLES_NRF24L01TERM is not set -# CONFIG_EXAMPLES_NSH is not set -# CONFIG_EXAMPLES_NULL is not set -# CONFIG_EXAMPLES_NX is not set -# CONFIG_EXAMPLES_NXCONSOLE is not set -# CONFIG_EXAMPLES_NXFFS is not set -# CONFIG_EXAMPLES_NXFLAT is not set -# CONFIG_EXAMPLES_NXHELLO is not set -# CONFIG_EXAMPLES_NXIMAGE is not set -# CONFIG_EXAMPLES_NXLINES is not set -# CONFIG_EXAMPLES_NXTEXT is not set -CONFIG_EXAMPLES_OSTEST=y -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 -CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000 -CONFIG_EXAMPLES_OSTEST_RR_RUNS=10 -# CONFIG_EXAMPLES_PASHELLO is not set -# CONFIG_EXAMPLES_PIPE is not set -# CONFIG_EXAMPLES_POLL is not set -# CONFIG_EXAMPLES_POSIXSPAWN is not set -# CONFIG_EXAMPLES_QENCODER is not set -# CONFIG_EXAMPLES_RGMP is not set -# CONFIG_EXAMPLES_ROMFS is not set -# CONFIG_EXAMPLES_SENDMAIL is not set -# CONFIG_EXAMPLES_SERLOOP is not set -# CONFIG_EXAMPLES_SLCD is not set -# CONFIG_EXAMPLES_SMART is not set -# CONFIG_EXAMPLES_TCPECHO is not set -# CONFIG_EXAMPLES_TELNETD is not set -# CONFIG_EXAMPLES_THTTPD is not set -# CONFIG_EXAMPLES_TIFF is not set -# CONFIG_EXAMPLES_TOUCHSCREEN is not set -# CONFIG_EXAMPLES_UDP is not set -# CONFIG_EXAMPLES_UIP is not set -# CONFIG_EXAMPLES_USBSERIAL is not set -# CONFIG_SYSTEM_USBMSC is not set -# CONFIG_EXAMPLES_USBTERM is not set -# CONFIG_EXAMPLES_WATCHDOG is not set - -# -# Graphics Support -# -# CONFIG_TIFF is not set - -# -# Interpreters -# -# CONFIG_INTERPRETERS_FICL is not set -# CONFIG_INTERPRETERS_PCODE is not set - -# -# Network Utilities -# - -# -# Networking Utilities -# -# CONFIG_NETUTILS_CODECS is not set -# CONFIG_NETUTILS_DHCPC is not set -# CONFIG_NETUTILS_DHCPD is not set -# CONFIG_NETUTILS_FTPC is not set -# CONFIG_NETUTILS_FTPD is not set -# CONFIG_NETUTILS_JSON is not set -# CONFIG_NETUTILS_RESOLV is not set -# CONFIG_NETUTILS_SMTP is not set -# CONFIG_NETUTILS_TELNETD is not set -# CONFIG_NETUTILS_TFTPC is not set -# CONFIG_NETUTILS_THTTPD is not set -# CONFIG_NETUTILS_UIPLIB is not set -# CONFIG_NETUTILS_WEBCLIENT is not set - -# -# FreeModBus -# -# CONFIG_MODBUS is not set - -# -# NSH Library -# -# CONFIG_NSH_LIBRARY is not set - -# -# NxWidgets/NxWM -# - -# -# System NSH Add-Ons -# - -# -# Custom Free Memory Command -# -# CONFIG_SYSTEM_FREE is not set - -# -# I2C tool -# - -# -# FLASH Program Installation -# -# CONFIG_SYSTEM_INSTALL is not set - -# -# FLASH Erase-all Command -# - -# -# RAM test -# -# CONFIG_SYSTEM_RAMTEST is not set - -# -# readline() -# -# CONFIG_SYSTEM_READLINE is not set - -# -# Power Off -# -# CONFIG_SYSTEM_POWEROFF is not set - -# -# RAMTRON -# -# CONFIG_SYSTEM_RAMTRON is not set - -# -# SD Card -# -# CONFIG_SYSTEM_SDCARD is not set - -# -# Sysinfo -# -# CONFIG_SYSTEM_SYSINFO is not set - -# -# USB Monitor -# - -# -# Zmodem Commands -# -# CONFIG_SYSTEM_ZMODEM is not set diff --git a/nuttx/configs/sama5d3x-ek/ostest/setenv.sh b/nuttx/configs/sama5d3x-ek/ostest/setenv.sh deleted file mode 100755 index da8ac6349..000000000 --- a/nuttx/configs/sama5d3x-ek/ostest/setenv.sh +++ /dev/null @@ -1,76 +0,0 @@ -#!/bin/bash -# configs/samard3x-ek/ostest/setenv.sh -# -# Copyright (C) 2013 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# - -if [ "$_" = "$0" ] ; then - echo "You must source this script, not run it!" 1>&2 - exit 1 -fi - -WD=`pwd` -if [ ! -x "setenv.sh" ]; then - echo "This script must be executed from the top-level NuttX build directory" - exit 1 -fi - -if [ -z "${PATH_ORIG}" ]; then - export PATH_ORIG="${PATH}" -fi - -# This is the Cygwin path to the location where I installed the Atmel GCC -# toolchain under Windows. You will also have to edit this if you install -# this toolchain in any other location -#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin" - -# This is the Cygwin path to the location where I installed the CodeSourcery -# toolchain under windows. You will also have to edit this if you install -# the CodeSourcery toolchain in any other location -#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" -export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin" - -# These are the Cygwin paths to the locations where I installed the Atollic -# toolchain under windows. You will also have to edit this if you install -# the Atollic toolchain in any other location. /usr/bin is added before -# the Atollic bin path because there is are binaries named gcc.exe and g++.exe -# at those locations as well. -#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin" -#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin" - -# This is the Cygwin path to the location where I build the buildroot -# toolchain. -#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm/staging_dir/bin" - -# Add the path to the toolchain to the PATH varialble -export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" - -echo "PATH : ${PATH}" |