diff options
Diffstat (limited to 'nuttx/configs/sama5d4-ek/src/sama5d4-ek.h')
| -rw-r--r-- | nuttx/configs/sama5d4-ek/src/sama5d4-ek.h | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/nuttx/configs/sama5d4-ek/src/sama5d4-ek.h b/nuttx/configs/sama5d4-ek/src/sama5d4-ek.h index e99a152f1..fc49e0b6c 100644 --- a/nuttx/configs/sama5d4-ek/src/sama5d4-ek.h +++ b/nuttx/configs/sama5d4-ek/src/sama5d4-ek.h @@ -540,7 +540,7 @@ #define MXT_I2C_ADDRESS 0x4c /* HSMCI Card Slots *****************************************************************/ -/* The SAMA4D4-EK provides a two SD memory card slots: (1) a full size SD +/* The SAMA5D4-EK provides a two SD memory card slots: (1) a full size SD * card slot (J10), and (2) a microSD memory card slot (J11). * * The full size SD card slot connects via HSMCI0. The card detect discrete @@ -597,7 +597,7 @@ PIO_PORT_PIOE | PIO_PIN15) /* USB Ports ************************************************************************/ -/* The SAMA4D4-EK features three USB communication ports: +/* The SAMA5D4-EK features three USB communication ports: * * * Port A Host High Speed (EHCI) and Full Speed (OHCI) multiplexed with * USB Device High Speed Micro AB connector, J1 @@ -685,7 +685,7 @@ /* Ethernet */ -#ifdef CONFIG_SAMA4_EMACB +#ifdef CONFIG_SAMA5_EMACB /* ETH0/1: Ethernet 10/100 (EMAC) Ports * * Networking support via the can be added to NSH by selecting the following @@ -747,13 +747,13 @@ * - LCD_ETH1_CONFIG = 1 & LCD_DETECT# =0: LCD 5v enable */ -#ifdef CONFIG_SAMA4_EMAC0 +#ifdef CONFIG_SAMA5_EMAC0 # define PIO_INT_ETH0 (PIO_INPUT | PIO_CFG_PULLUP | PIO_CFG_DEGLITCH | \ PIO_INT_BOTHEDGES | PIO_PORT_PIOE | PIO_PIN1) # define IRQ_INT_ETH0 SAM_IRQ_PE1 #endif -#ifdef CONFIG_SAMA4_EMAC1 +#ifdef CONFIG_SAMA5_EMAC1 # define PIO_INT_ETH1 (PIO_INPUT | PIO_CFG_PULLUP | PIO_CFG_DEGLITCH | \ PIO_INT_BOTHEDGES | PIO_PORT_PIOE | PIO_PIN2) # define IRQ_INT_ETH1 SAM_IRQ_PE2 @@ -844,7 +844,7 @@ * Name: sam_spiinitialize * * Description: - * Called to configure SPI chip select PIO pins for the SAMA4D4-EK board. + * Called to configure SPI chip select PIO pins for the SAMA5D4-EK board. * ************************************************************************************/ @@ -858,7 +858,7 @@ void weak_function sam_spiinitialize(void); * Description: * Configures DDR2 (MT47H128M16RT 128MB or, optionally, MT47H64M16HR) * - * Per the SAMA4D4-EK User guide: "Two SDRAM/DDR2 used as main system memory. + * Per the SAMA5D4-EK User guide: "Two SDRAM/DDR2 used as main system memory. * MT47H128M16 - 2 Gb - 16 Meg x 16 x 8 banks, the board provides up to 2 Gb on- * board, soldered DDR2 SDRAM. The memory bus is 32 bits wide and operates with * up to 166 MHz." @@ -870,7 +870,7 @@ void weak_function sam_spiinitialize(void); * Column address A[9:0] (1K) * Bank address BA[2:0] a(24,25) (8) * - * This logic was taken from Atmel sample code for the SAMA4D4-EK. + * This logic was taken from Atmel sample code for the SAMA5D4-EK. * * Input Parameters: * devtype - Either DDRAM_MT47H128M16RT or DDRAM_MT47H64M16HR @@ -999,7 +999,7 @@ bool sam_writeprotected(int slotno); * * Description: * Called from sam_usbinitialize very early in inialization to setup USB-related - * PIO pins for the SAMA4D4-EK board. + * PIO pins for the SAMA5D4-EK board. * ************************************************************************************/ |