diff options
Diffstat (limited to 'nuttx/configs/shenzhou/README.txt')
| -rw-r--r-- | nuttx/configs/shenzhou/README.txt | 42 |
1 files changed, 29 insertions, 13 deletions
diff --git a/nuttx/configs/shenzhou/README.txt b/nuttx/configs/shenzhou/README.txt index 9c358c5a5..515b487e7 100644 --- a/nuttx/configs/shenzhou/README.txt +++ b/nuttx/configs/shenzhou/README.txt @@ -702,11 +702,11 @@ Where <subdir> is one of the following: This is a special configuration setup for the NxWM window manager UnitTest. The NxWM window manager can be found here: - trunk/NxWidgets/nxwm + nuttx-code/NxWidgets/nxwm The NxWM unit test can be found at: - trunk/NxWidgets/UnitTests/nxwm + nuttx-code/NxWidgets/UnitTests/nxwm NOTE: JP6 selects between the touchscreen interrupt and the MII interrupt. It should be positioned 1-2 to enable the touchscreen @@ -714,13 +714,13 @@ Where <subdir> is one of the following: Documentation for installing the NxWM unit test can be found here: - trunk/NxWidgets/UnitTests/README.txt + nuttx-code/NxWidgets/UnitTests/README.txt Here is the quick summary of the build steps: 1. Intall the nxwm configuration - $ cd ~/nuttx/trunk/nuttx/tools + $ cd ~/nuttx/nuttx-code/tools $ ./configure.sh shenzhou/nxwm 2. Make the build context (only) @@ -732,25 +732,41 @@ Where <subdir> is one of the following: 3. Install the nxwm unit test - $ cd ~/nuttx/trunk/NxWidgets - $ tools/install.sh ~/nuttx/trunk/apps nxwm + $ cd ~/nuttx/nuttx-code/NxWidgets + $ tools/install.sh ~/nuttx/nuttx-code/apps nxwm Creating symbolic link - - To ~/nuttx/trunk/NxWidgets/UnitTests/nxwm - - At ~/nuttx/trunk/apps/external + - To ~/nuttx/nuttx-code/NxWidgets/UnitTests/nxwm + - At ~/nuttx/nuttx-code/apps/external 4. Build the NxWidgets library - $ cd ~/nuttx/trunk/NxWidgets/libnxwidgets - $ make TOPDIR=~/nuttx/trunk/nuttx + $ cd ~/nuttx/nuttx-code/NxWidgets/libnxwidgets + $ make TOPDIR=~/nuttx/nuttx-code ... 5. Build the NxWM library - $ cd ~/nuttx/trunk/NxWidgets/nxwm - $ make TOPDIR=~//nuttx/trunk/nuttx + $ cd ~/nuttx/nuttx-code/NxWidgets/nxwm + $ make TOPDIR=~/nuttx/nuttx-code ... 6. Built NuttX with the installed unit test as the application - $ cd ~/nuttx/trunk/nuttx + $ cd ~/nuttx/nuttx-code $ make + + NOTE: Reading from the LCD is not currently supported by this + configuration. The hardware will support reading from the LCD + and drivers/lcd/ssd1289.c also supports reading from the LCD. + This limits some graphics capabilities. + + If you enable reading from the LCD, you will see some memory + corruption. If you get inspired to debug this problem, you can + turn the LCD read functionality back on by setting: + + -CONFIG_LCD_NOGETRUN=y + +# CONFIG_LCD_NOGETRUN is not set + + -CONFIG_NX_WRITEONLY=y + +# CONFIG_NX_WRITEONLY is not set +
\ No newline at end of file |