diff options
Diffstat (limited to 'nuttx/configs/shenzhou/src/stm32_adc.c')
-rw-r--r-- | nuttx/configs/shenzhou/src/stm32_adc.c | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/nuttx/configs/shenzhou/src/stm32_adc.c b/nuttx/configs/shenzhou/src/stm32_adc.c new file mode 100644 index 000000000..ee806a993 --- /dev/null +++ b/nuttx/configs/shenzhou/src/stm32_adc.c @@ -0,0 +1,172 @@ +/************************************************************************************ + * configs/shenzhou/src/stm32_adc.c + * + * Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> + +#include <errno.h> +#include <debug.h> + +#include <nuttx/analog/adc.h> +#include <arch/board/board.h> + +#include "chip.h" +#include "up_arch.h" + +#include "stm32_pwm.h" +#include "shenzhou-internal.h" + +#ifdef CONFIG_ADC + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ +/* Configuration ********************************************************************/ +/* Up to 3 ADC interfaces are supported */ + +#if STM32_NADC < 3 +# undef CONFIG_STM32_ADC3 +#endif + +#if STM32_NADC < 2 +# undef CONFIG_STM32_ADC2 +#endif + +#if STM32_NADC < 1 +# undef CONFIG_STM32_ADC1 +#endif + +#if defined(CONFIG_STM32_ADC1) || defined(CONFIG_STM32_ADC2) || defined(CONFIG_STM32_ADC3) +#ifndef CONFIG_STM32_ADC1 +# warning "Channel information only available for ADC1" +#endif + +/* The number of ADC channels in the conversion list */ + +#define ADC1_NCHANNELS 1 + +/************************************************************************************ + * Private Data + ************************************************************************************/ + +/* Identifying number of each ADC channel. The only internal signal for ADC testing + * is the potentiometer input: + * + * ADC1_IN10(PC0) Potentiometer + * + * External signals are also available on CON5 CN14: + * + * ADC_IN8 (PB0) CON5 CN14 Pin2 + * ADC_IN9 (PB1) CON5 CN14 Pin1 + */ + +#ifdef CONFIG_STM32_ADC1 +static const uint8_t g_chanlist[ADC1_NCHANNELS] = {10}; //{10, 8, 9}; + +/* Configurations of pins used by each ADC channel */ + +static const uint32_t g_pinlist[ADC1_NCHANNELS] = {GPIO_ADC12_IN10}; //{GPIO_ADC12_IN10, GPIO_ADC12_IN8, GPIO_ADC12_IN9}; +#endif + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: adc_devinit + * + * Description: + * All STM32 architectures must provide the following interface to work with + * examples/adc. + * + ************************************************************************************/ + +int adc_devinit(void) +{ +#ifdef CONFIG_STM32_ADC1 + static bool initialized = false; + struct adc_dev_s *adc; + int ret; + int i; + + /* Check if we have already initialized */ + + if (!initialized) + { + /* Configure the pins as analog inputs for the selected channels */ + + for (i = 0; i < ADC1_NCHANNELS; i++) + { + stm32_configgpio(g_pinlist[i]); + } + + /* Call stm32_adcinitialize() to get an instance of the ADC interface */ + + adc = stm32_adcinitialize(1, g_chanlist, ADC1_NCHANNELS); + if (adc == NULL) + { + adbg("ERROR: Failed to get ADC interface\n"); + return -ENODEV; + } + + /* Register the ADC driver at "/dev/adc0" */ + + ret = adc_register("/dev/adc0", adc); + if (ret < 0) + { + adbg("adc_register failed: %d\n", ret); + return ret; + } + + /* Now we are initialized */ + + initialized = true; + } + + return OK; +#else + return -ENOSYS; +#endif +} + +#endif /* CONFIG_STM32_ADC1 || CONFIG_STM32_ADC2 || CONFIG_STM32_ADC3 */ +#endif /* CONFIG_ADC */ |