1 files changed, 159 insertions, 0 deletions
diff --git a/nuttx/configs/shenzhou/src/up_usbmsc.c b/nuttx/configs/shenzhou/src/up_usbmsc.c
new file mode 100644
index 000000000..8d12f6324
--- /dev/null
+++ b/nuttx/configs/shenzhou/src/up_usbmsc.c
@@ -0,0 +1,159 @@
+/****************************************************************************
+ * configs/shenzhou/src/up_usbmsc.c
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Configure and register the STM32 MMC/SD SDIO block driver.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <nuttx/sdio.h>
+#include <nuttx/mmcsd.h>
+
+#include "stm32_internal.h"
+
+/* There is nothing to do here if SDIO support is not selected. */
+
+#ifdef CONFIG_STM32_SDIO
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+/* Configuration ************************************************************/
+
+#ifndef CONFIG_EXAMPLES_USBMSC_DEVMINOR1
+#  define CONFIG_EXAMPLES_USBMSC_DEVMINOR1 0
+#endif
+
+/* SLOT number(s) could depend on the board configuration */
+
+#undef STM32_MMCSDSLOTNO
+#define STM32_MMCSDSLOTNO 0
+
+/* Debug ********************************************************************/
+
+#ifdef CONFIG_CPP_HAVE_VARARGS
+#  ifdef CONFIG_DEBUG
+#    define message(...) lib_lowprintf(__VA_ARGS__)
+#    define msgflush()
+#  else
+#    define message(...) printf(__VA_ARGS__)
+#    define msgflush() fflush(stdout)
+#  endif
+#else
+#  ifdef CONFIG_DEBUG
+#    define message lib_lowprintf
+#    define msgflush()
+#  else
+#    define message printf
+#    define msgflush() fflush(stdout)
+#  endif
+#endif
+
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: usbmsc_archinitialize
+ *
+ * Description:
+ *   Perform architecture specific initialization
+ *
+ ****************************************************************************/
+
+int usbmsc_archinitialize(void)
+{
+  /* If examples/usbmsc is built as an NSH command, then SD slot should
+   * already have been initized in nsh_archinitialize() (see up_nsh.c).  In
+   * this case, there is nothing further to be done here.
+   */
+
+#ifndef CONFIG_EXAMPLES_USBMSC_BUILTIN
+  FAR struct sdio_dev_s *sdio;
+  int ret;
+
+  /* First, get an instance of the SDIO interface */
+
+  message("usbmsc_archinitialize: "
+          "Initializing SDIO slot %d\n",
+          STM32_MMCSDSLOTNO);
+
+  sdio = sdio_initialize(STM32_MMCSDSLOTNO);
+  if (!sdio)
+    {
+      message("usbmsc_archinitialize: Failed to initialize SDIO slot %d\n",
+              STM32_MMCSDSLOTNO);
+      return -ENODEV;
+    }
+
+  /* Now bind the SDIO interface to the MMC/SD driver */
+
+  message("usbmsc_archinitialize: "
+          "Bind SDIO to the MMC/SD driver, minor=%d\n",
+          CONFIG_EXAMPLES_USBMSC_DEVMINOR1);
+
+  ret = mmcsd_slotinitialize(CONFIG_EXAMPLES_USBMSC_DEVMINOR1, sdio);
+  if (ret != OK)
+    {
+      message("usbmsc_archinitialize: "
+              "Failed to bind SDIO to the MMC/SD driver: %d\n",
+              ret);
+      return ret;
+    }
+  message("usbmsc_archinitialize: "
+          "Successfully bound SDIO to the MMC/SD driver\n");
+  
+  /* Then let's guess and say that there is a card in the slot.  I need to check to
+   * see if the Shenzhou board supports a GPIO to detect if there is a card in
+   * the slot.
+   */
+
+   sdio_mediachange(sdio, true);
+
+#endif /* CONFIG_EXAMPLES_USBMSC_BUILTIN */
+
+   return OK;
+}
+
+#endif /* CONFIG_STM32_SDIO */