diff options
Diffstat (limited to 'nuttx/configs/stm3210e-eval')
-rwxr-xr-x | nuttx/configs/stm3210e-eval/README.txt | 3 | ||||
-rw-r--r-- | nuttx/configs/stm3210e-eval/src/up_lcd.c | 159 |
2 files changed, 156 insertions, 6 deletions
diff --git a/nuttx/configs/stm3210e-eval/README.txt b/nuttx/configs/stm3210e-eval/README.txt index e8d634bb9..017af14e5 100755 --- a/nuttx/configs/stm3210e-eval/README.txt +++ b/nuttx/configs/stm3210e-eval/README.txt @@ -457,6 +457,9 @@ STM3210E-EVAL-specific Configuration Options CONFIG_LCD_BACKLIGHT - Define to support an adjustable backlight using timer 1. The granularity of the settings is determined by CONFIG_LCD_MAXPOWER. Requires CONFIG_STM32_TIM1. + CONFIG_LCD_RDSHIFT - When reading 16-bit gram data, there appears + to be a shift in the returned data. This value fixes the offset. + Default 5. Configurations ============== diff --git a/nuttx/configs/stm3210e-eval/src/up_lcd.c b/nuttx/configs/stm3210e-eval/src/up_lcd.c index af4e412ce..6ce37f390 100644 --- a/nuttx/configs/stm3210e-eval/src/up_lcd.c +++ b/nuttx/configs/stm3210e-eval/src/up_lcd.c @@ -121,6 +121,19 @@ # error "PA8 cannot be configured as TIM1 CH1 with full remap" #endif +/* When reading 16-bit gram data, there appears to be a 5-bit shift in the returned + * data. + */ + +#ifndef CONFIG_LCD_RDSHIFT +# define CONFIG_LCD_RDSHIFT 5 +#endif + +/* Red and green appear to be swapped on read-back as well */ + +#undef CONFIG_LCD_RDSWAP +#define CONFIG_LCD_RDSWAP 1 + /* Define CONFIG_DEBUG_LCD to enable detailed LCD debug output. Verbose debug must * also be enabled. */ @@ -317,7 +330,14 @@ static void stm3210e_writereg(uint8_t regaddr, uint16_t regval); static uint16_t stm3210e_readreg(uint8_t regaddr); static inline void stm3210e_gramselect(void); static inline void stm3210e_writegram(uint16_t rgbval); -static inline uint16_t stm3210e_readgram(void); +#if CONFIG_LCD_RDSHIFT > 0 +static inline void stm3210e_readsetup(FAR uint16_t *accum); +static inline uint16_t stm3210e_readgram(FAR uint16_t *accum); +#else +static inline uint16_t stm3210e_readnoshift(void); +# define stm3210e_readsetup(a,n) +# define stm3210e_readgram(a,n) stm3210e_readnoshift() +#endif static void stm3210e_setcursor(uint16_t col, uint16_t row); /* LCD Data Transfer Methods */ @@ -487,19 +507,136 @@ static inline void stm3210e_writegram(uint16_t rgbval) } /************************************************************************************** + * Name: stm3210e_readsetup + * + * Description: + * Prime the operation by reading one pixel from the GRAM memory + * + **************************************************************************************/ + +#if CONFIG_LCD_RDSHIFT > 0 +static inline void stm3210e_readsetup(FAR uint16_t *accum) +{ + /* Read the value (GRAM register already selected) */ + + *accum = LCD->value; +} +#endif + +/************************************************************************************** * Name: stm3210e_readgram * * Description: + * Read one correctly aligned pixel from the GRAM memory + * + **************************************************************************************/ + +#if CONFIG_LCD_RDSHIFT > 0 +static inline uint16_t stm3210e_readgram(FAR uint16_t *accum) +{ +#ifdef CONFIG_LCD_RDSWAP + uint16_t red; + uint16_t green; + uint16_t blue; +#endif + + /* Read the value (GRAM register already selected) */ + + uint16_t next = LCD->value; + + /* Return previous bits 0-10 as bits 6-15 and next data bits 11-15 as bits 0-5 + * + * xxxx xPPP PPPP PPPP + * NNNN Nxxx xxxx xxxx + * + * Assuming that CONFIG_LCD_RDSHIFT == 5 + */ + + uint16_t value = *accum << CONFIG_LCD_RDSHIFT | next >> (16-CONFIG_LCD_RDSHIFT); + + /* Save the value for the next time we are called */ + + *accum = next; + + /* Tear the RGB655 apart. Swap read and green */ + +#ifdef CONFIG_LCD_RDSWAP + red = (value << (11-5)) & 0xf800; /* Move bits 5-9 to 11-15 */ + green = (value >> (10-5)) & 0x07e0; /* Move bits 10-15 to bits 5-10 */ + blue = value & 0x001f; /* Blue is in the right place */ + + /* And put the RGB565 back together */ + + value = red | green | blue; + + /* This is wierd... If blue is zero, then red+green values are off by 0x20. + * Except that both 0x0000 and 0x0020 can map to 0x0000. Need to revisit + * this!!!!!!!!!!! I might be misinterpreting some of the data that I have. + */ + +#if 0 /* REVISIT */ + if (value != 0 && blue == 0) + { + value += 0x20; + } +#endif +#endif + + return value; +} +#endif + +/************************************************************************************** + * Name: stm3210e_readnoshift + * + * Description: * Read one pixel from the GRAM memory * **************************************************************************************/ -static inline uint16_t stm3210e_readgram(void) +#if CONFIG_LCD_RDSHIFT <= 0 +static inline uint16_t stm3210e_readnoshift(void) { - /* Write the value (GRAM register already selected) */ +#ifdef CONFIG_LCD_RDSWAP + uint16_t value; + uint16_t red; + uint16_t green; + uint16_t blue; + + /* Read the value (GRAM register already selected) */ + + value = LCD->value; + + /* Tear the RGB655 apart. Swap read and green */ + + red = (value << (11-5)) & 0xf800; /* Move bits 5-9 to 11-15 */ + green = (value >> (10-5)) & 0x07e0; /* Move bits 10-15 to bits 5-10 */ + blue = value & 0x001f; /* Blue is in the right place */ + + /* And put the RGB565 back together */ + + value = red | green | blue; + + /* This is wierd... If blue is zero, then red+green values are off by 0x20. + * Except that both 0x0000 and 0x0020 can map to 0x0000. Need to revisit + * this!!!!!!!!!!! I might be misinterpreting some of the data that I have. + */ + +#if 0 /* REVISIT */ + if (value != 0 && blue == 0) + { + value += 0x20; + } +#endif + + return value; +#else + /* Read the value (GRAM register already selected) */ return LCD->value; +#endif } +#endif /************************************************************************************** * Name: stm3210e_setcursor @@ -654,6 +791,9 @@ static int stm3210e_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t *buffer, size_t npixels) { FAR uint16_t *dest = (FAR uint16_t*)buffer; +#if CONFIG_LCD_RDSHIFT > 0 + uint16_t accum; +#endif int i; /* Buffer must be provided and aligned to a 16-bit address boundary */ @@ -677,11 +817,16 @@ static int stm3210e_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t *buffer, /* Then read the GRAM data, auto-decrementing Y */ stm3210e_gramselect(); + + /* Prime the pump for unaligned read data */ + + stm3210e_readsetup(&accum); + for (i = 0; i < npixels; i++) { /* Read the next pixel from this position (autoincrements to the next row) */ - *dest++ = stm3210e_readgram(); + *dest++ = stm3210e_readgram(&accum); } #elif defined(CONFIG_LCD_PORTRAIT) /* Convert coordinates (Swap row and column. This is done implicitly). */ @@ -694,7 +839,8 @@ static int stm3210e_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t *buffer, stm3210e_setcursor(row, col); stm3210e_gramselect(); - *dest++ = stm3210e_readgram(); + stm3210e_readsetup(&accum); + *dest++ = stm3210e_readgram(&accum); /* Increment to next column */ @@ -716,7 +862,8 @@ static int stm3210e_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t *buffer, stm3210e_setcursor(row, col); stm3210e_gramselect(); - *dest++ = stm3210e_readgram(); + stm3210e_readsetup(&accum); + *dest++ = stm3210e_readgram(&accum); /* Decrement to next column */ |