diff options
Diffstat (limited to 'nuttx/configs/stm3220g-eval/nsh2')
-rw-r--r-- | nuttx/configs/stm3220g-eval/nsh2/Make.defs | 31 | ||||
-rw-r--r-- | nuttx/configs/stm3220g-eval/nsh2/defconfig | 87 | ||||
-rw-r--r-- | nuttx/configs/stm3220g-eval/nsh2/defconfig.bak | 1424 | ||||
-rw-r--r-- | nuttx/configs/stm3220g-eval/nsh2/defconfig~.bak | 1424 | ||||
-rw-r--r-- | nuttx/configs/stm3220g-eval/nsh2/ld.script | 8 | ||||
-rwxr-xr-x | nuttx/configs/stm3220g-eval/nsh2/setenv.sh | 13 |
6 files changed, 101 insertions, 2886 deletions
diff --git a/nuttx/configs/stm3220g-eval/nsh2/Make.defs b/nuttx/configs/stm3220g-eval/nsh2/Make.defs index 73595d2ef..3a096c752 100644 --- a/nuttx/configs/stm3220g-eval/nsh2/Make.defs +++ b/nuttx/configs/stm3220g-eval/nsh2/Make.defs @@ -40,30 +40,57 @@ include ${TOPDIR}/.config ifeq ($(CONFIG_STM32_CODESOURCERYW),y) # CodeSourcery under Windows CROSSDEV = arm-none-eabi- + ARCROSSDEV = arm-none-eabi- WINTOOL = y ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft endif ifeq ($(CONFIG_STM32_CODESOURCERYL),y) # CodeSourcery under Linux CROSSDEV = arm-none-eabi- + ARCROSSDEV = arm-none-eabi- ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft MAXOPTIMIZATION = -O2 endif +ifeq ($(CONFIG_STM32_ATOLLIC_LITE),y) + # Atollic toolchain under Windows + CROSSDEV = arm-atollic-eabi- + ARCROSSDEV = + WINTOOL = y +ifeq ($(CONFIG_ARCH_FPU),y) + ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -march=armv7e-m -mfpu=fpv4-sp-d16 -mfloat-abi=hard +else + ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft +endif +endif +ifeq ($(CONFIG_STM32_ATOLLIC_PRO),y) + # Atollic toolchain under Windows + CROSSDEV = arm-atollic-eabi- + ARCROSSDEV = arm-atollic-eabi- + WINTOOL = y +ifeq ($(CONFIG_ARCH_FPU),y) + ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -march=armv7e-m -mfpu=fpv4-sp-d16 -mfloat-abi=hard +else + ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft +endif +endif ifeq ($(CONFIG_STM32_DEVKITARM),y) # devkitARM under Windows CROSSDEV = arm-eabi- + ARCROSSDEV = arm-eabi- WINTOOL = y ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft endif ifeq ($(CONFIG_STM32_RAISONANCE),y) # Raisonance RIDE7 under Windows CROSSDEV = arm-none-eabi- + ARCROSSDEV = arm-none-eabi- WINTOOL = y ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin CROSSDEV = arm-elf- + ARCROSSDEV = arm-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -91,8 +118,8 @@ CC = $(CROSSDEV)gcc CXX = $(CROSSDEV)g++ CPP = $(CROSSDEV)gcc -E LD = $(CROSSDEV)ld -AR = $(CROSSDEV)ar rcs -NM = $(CROSSDEV)nm +AR = $(ARCROSSDEV)ar rcs +NM = $(ARCROSSDEV)nm OBJCOPY = $(CROSSDEV)objcopy OBJDUMP = $(CROSSDEV)objdump diff --git a/nuttx/configs/stm3220g-eval/nsh2/defconfig b/nuttx/configs/stm3220g-eval/nsh2/defconfig index 0bc2be433..aa740611a 100644 --- a/nuttx/configs/stm3220g-eval/nsh2/defconfig +++ b/nuttx/configs/stm3220g-eval/nsh2/defconfig @@ -93,11 +93,13 @@ CONFIG_ARCH_DMA=n # # Identify toolchain and linker options # -CONFIG_STM32_CODESOURCERYW=n +CONFIG_STM32_CODESOURCERYW=y CONFIG_STM32_CODESOURCERYL=n +CONFIG_STM32_ATOLLIC_LITE=n +CONFIG_STM32_ATOLLIC_PRO=n CONFIG_STM32_DEVKITARM=n CONFIG_STM32_RAISONANCE=n -CONFIG_STM32_BUILDROOT=y +CONFIG_STM32_BUILDROOT=n # # JTAG Enable settings (by default JTAG-DP and SW-DP are disabled): @@ -111,12 +113,36 @@ CONFIG_STM32_BUILDROOT=y # but without JNTRST. # CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled # -CONFIG_STM32_DFU=n +CONFIG_STM32_DFU=y CONFIG_STM32_JTAG_FULL_ENABLE=y CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n CONFIG_STM32_JTAG_SW_ENABLE=n # +# On-chip CCM SRAM configuration +# +# CONFIG_STM32_CCMEXCLUDE - Exclude CCM SRAM from the HEAP. You would need +# to do this if DMA is enabled to prevent non-DMA-able CCM memory from +# being a part of the stack. +# +CONFIG_STM32_CCMEXCLUDE=y + +# +# On-board FSMC SRAM configuration +# +# CONFIG_STM32_FSMC - Required. See below +# CONFIG_MM_REGIONS - Required. Must be 2 or 3 (see above) +# +# CONFIG_STM32_FSMC_SRAM=y - Indicates that SRAM is available via the +# FSMC (as opposed to an LCD or FLASH). +# CONFIG_HEAP2_BASE - The base address of the SRAM in the FSMC address space +# CONFIG_HEAP2_END - The end (+1) of the SRAM in the FSMC address space +# +CONFIG_STM32_FSMC_SRAM=y +CONFIG_HEAP2_BASE=0x64000000 +CONFIG_HEAP2_END=(0x64000000+(2*1024*1024)) + +# # Individual subsystems can be enabled: # # Individual subsystems can be enabled: @@ -125,7 +151,7 @@ CONFIG_STM32_CRC=n CONFIG_STM32_BKPSRAM=n CONFIG_STM32_CCMDATARAM=n CONFIG_STM32_DMA1=n -CONFIG_STM32_DMA2=n +CONFIG_STM32_DMA2=y CONFIG_STM32_ETHMAC=y CONFIG_STM32_OTGHS=n # AHB2: @@ -400,6 +426,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_DEBUG_SYMBOLS - build without optimization and with # debug symbols (needed for use with a debugger). # CONFIG_HAVE_CXX - Enable support for C++ +# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support +# for initialization of static C++ instances for this architecture +# and for the selected toolchain (via up_cxxinitialize()). # CONFIG_MM_REGIONS - If the architecture includes multiple # regions of memory to allocate from, this specifies the # number of memory regions that the memory manager must @@ -483,26 +512,28 @@ CONFIG_HAVE_LIBM=n # CONFIG_SCHED_ATEXIT - Enabled the atexit() API # #CONFIG_APPS_DIR= -CONFIG_DEBUG=y -CONFIG_DEBUG_VERBOSE=y -CONFIG_DEBUG_SYMBOLS=y +CONFIG_DEBUG=n +CONFIG_DEBUG_VERBOSE=n +CONFIG_DEBUG_SYMBOLS=n CONFIG_DEBUG_FS=n CONFIG_DEBUG_GRAPHICS=n CONFIG_DEBUG_LCD=n CONFIG_DEBUG_USB=n -CONFIG_DEBUG_NET=y +CONFIG_DEBUG_NET=n CONFIG_DEBUG_RTC=n CONFIG_DEBUG_ANALOG=n CONFIG_DEBUG_PWM=n CONFIG_DEBUG_CAN=n CONFIG_DEBUG_I2C=n -CONFIG_HAVE_CXX=n +CONFIG_DEBUG_DMA=n +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y CONFIG_MM_REGIONS=1 CONFIG_ARCH_LOWPUTC=y CONFIG_RR_INTERVAL=200 CONFIG_SCHED_INSTRUMENTATION=n CONFIG_TASK_NAME_SIZE=0 -CONFIG_START_YEAR=2011 +CONFIG_START_YEAR=2012 CONFIG_START_MONTH=12 CONFIG_START_DAY=6 CONFIG_GREGORIAN_TIME=n @@ -595,7 +626,7 @@ CONFIG_DISABLE_SIGNALS=n CONFIG_DISABLE_MQUEUE=n CONFIG_DISABLE_MOUNTPOINT=n CONFIG_DISABLE_ENVIRON=n -CONFIG_DISABLE_POLL=y +CONFIG_DISABLE_POLL=n # # Misc libc settings @@ -774,31 +805,22 @@ CONFIG_FS_WRITEBUFFER=n # Default: Medium # CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode. Default: # 4-bit transfer mode. +# CONFIG_MMCSD_MULTIBLOCK_DISABLE - Use only the single block transfer method. +# This setting is used to work around buggy drivers that cannot handle +# multiple block transfers. # CONFIG_MMCSD_MMCSUPPORT # Enable support for MMC cards # CONFIG_MMCSD_HAVECARDDETECT # SDIO driver card detection is 100% accurate # -CONFIG_SDIO_DMA=n +CONFIG_SDIO_DMA=y #CONFIG_SDIO_PRI=128 #CONFIG_SDIO_DMAPRIO #CONFIG_SDIO_WIDTH_D1_ONLY +CONFIG_MMCSD_MULTIBLOCK_DISABLE=y CONFIG_MMCSD_MMCSUPPORT=n CONFIG_MMCSD_HAVECARDDETECT=n -# -# SDIO-based MMC/SD driver -# -# CONFIG_SDIO_DMA -# SDIO driver supports DMA -# CONFIG_MMCSD_MMCSUPPORT -# Enable support for MMC cards -# CONFIG_MMCSD_HAVECARDDETECT -# SDIO driver card detection is 100% accurate -# -CONFIG_SDIO_DMA=n -CONFIG_MMCSD_MMCSUPPORT=n -CONFIG_MMCSD_HAVECARDDETECT=n # # TCP/IP and UDP support via uIP @@ -876,9 +898,9 @@ CONFIG_NET_RESOLV_ENTRIES=4 # CONFIG_FTPD_SERVERID - The server name to use in FTP communications. # Default: "NuttX FTP Server" # CONFIG_FTPD_CMDBUFFERSIZE - The maximum size of one command. Default: -# 512 bytes. +# 128 bytes. # CONFIG_FTPD_DATABUFFERSIZE - The size of the I/O buffer for data -# transfers. Default: 2048 bytes. +# transfers. Default: 512 bytes. # CONFIG_FTPD_WORKERSTACKSIZE - The stacksize to allocate for each # FTP daemon worker thread. Default: 2048 bytes. # @@ -888,6 +910,7 @@ CONFIG_NET_RESOLV_ENTRIES=4 # CONFIG_DISABLE_PTHREAD - pthread support is required # CONFIG_DISABLE_POLL - poll() support is required # +CONFIG_FTPD_CMDBUFFERSIZE=2048 # # RTC Configuration @@ -1177,8 +1200,8 @@ CONFIG_NX_MXCLIENTMSGS=16 # # Settings for examples/uip # -CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1) +CONFIG_EXAMPLE_UIP_IPADDR==(192<<24|168<<16|21<<8|15) +CONFIG_EXAMPLE_UIP_DRIPADDR=(192<<24|168<<16|21<<8|10) CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0) CONFIG_EXAMPLE_UIP_DHCPC=n @@ -1187,10 +1210,10 @@ CONFIG_EXAMPLE_UIP_DHCPC=n CONFIG_EXAMPLE_NETTEST_SERVER=n CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n CONFIG_EXAMPLE_NETTEST_NOMAC=y -CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1) +CONFIG_EXAMPLE_NETTEST_IPADDR==(192<<24|168<<16|21<<8|15) +CONFIG_EXAMPLE_NETTEST_DRIPADDR=(192<<24|168<<16|21<<8|10) CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1) +CONFIG_EXAMPLE_NETTEST_CLIENTIP=(192<<24|168<<16|21<<8|10) # # Settings for examples/ostest diff --git a/nuttx/configs/stm3220g-eval/nsh2/defconfig.bak b/nuttx/configs/stm3220g-eval/nsh2/defconfig.bak deleted file mode 100644 index 18a95211e..000000000 --- a/nuttx/configs/stm3220g-eval/nsh2/defconfig.bak +++ /dev/null @@ -1,1424 +0,0 @@ -############################################################################ -# configs/stm3220g-eval/nsh2/defconfig -# -# Copyright (C) 2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# architecture selection -# -# CONFIG_ARCH - identifies the arch subdirectory and, hence, the -# processor architecture. -# CONFIG_ARCH_family - for use in C code. This identifies the -# particular chip family that the architecture is implemented -# in. -# CONFIG_ARCH_architecture - for use in C code. This identifies the -# specific architecture within the chip familyl. -# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory -# CONFIG_ARCH_CHIP_name - For use in C code -# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, -# the board that supports the particular chip or SoC. -# CONFIG_ARCH_BOARD_name - for use in C code -# CONFIG_ENDIAN_BIG - define if big endian (default is little endian) -# CONFIG_BOARD_LOOPSPERMSEC - for delay loops -# CONFIG_DRAM_SIZE - Describes the installed DRAM. -# CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM -# CONFIG_ARCH_IRQPRIO - The STM3220xxx supports interrupt prioritization -# CONFIG_ARCH_FPU - The STM3220xxx supports a floating point unit (FPU) -# (But, unfortunately, GCC does not support it). -# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt -# stack. If defined, this symbol is the size of the interrupt -# stack in bytes. If not defined, the user task stacks will be -# used during interrupt handling. -# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions -# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader. -# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. -# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture. -# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that -# cause a 100 second delay during boot-up. This 100 second delay -# serves no purpose other than it allows you to calibrate -# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until -# the delay actually is 100 seconds. -# CONFIG_ARCH_DMA - Support DMA initialization -# -CONFIG_ARCH=arm -CONFIG_ARCH_ARM=y -CONFIG_ARCH_CORTEXM3=y -CONFIG_ARCH_CHIP=stm32 -CONFIG_ARCH_CHIP_STM32F207IG=y -CONFIG_ARCH_BOARD=stm3220g-eval -CONFIG_ARCH_BOARD_STM3220G_EVAL=y -CONFIG_BOARD_LOOPSPERMSEC=16717 -CONFIG_DRAM_SIZE=0x00030000 -CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_FPU=n -CONFIG_ARCH_INTERRUPTSTACK=n -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_BOOTLOADER=n -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_BUTTONS=n -CONFIG_ARCH_CALIBRATION=n -CONFIG_ARCH_DMA=n - -# -# Identify toolchain and linker options -# -CONFIG_STM32_CODESOURCERYW=n -CONFIG_STM32_CODESOURCERYL=n -CONFIG_STM32_DEVKITARM=n -CONFIG_STM32_RAISONANCE=n -CONFIG_STM32_BUILDROOT=y - -# -# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled): -# -# CONFIG_STM32_DFU - Use the DFU bootloader, not JTAG -# -# JTAG Enable options: -# -# CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) -# CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) -# but without JNTRST. -# CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled -# -CONFIG_STM32_DFU=n -CONFIG_STM32_JTAG_FULL_ENABLE=y -CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n -CONFIG_STM32_JTAG_SW_ENABLE=n - -# -# Individual subsystems can be enabled: -# -# Individual subsystems can be enabled: -# AHB1: -CONFIG_STM32_CRC=n -CONFIG_STM32_BKPSRAM=n -CONFIG_STM32_CCMDATARAM=n -CONFIG_STM32_DMA1=n -CONFIG_STM32_DMA2=n -CONFIG_STM32_ETHMAC=y -CONFIG_STM32_OTGHS=n -# AHB2: -CONFIG_STM32_DCMI=n -CONFIG_STM32_CRYP=n -CONFIG_STM32_HASH=n -CONFIG_STM32_RNG=n -CONFIG_STM32_OTGFS=n -# AHB3: -CONFIG_STM32_FSMC=n -# APB1: -CONFIG_STM32_TIM2=n -CONFIG_STM32_TIM3=n -CONFIG_STM32_TIM4=n -CONFIG_STM32_TIM5=n -CONFIG_STM32_TIM6=n -CONFIG_STM32_TIM7=n -CONFIG_STM32_TIM12=n -CONFIG_STM32_TIM13=n -CONFIG_STM32_TIM14=n -CONFIG_STM32_WWDG=n -CONFIG_STM32_SPI2=n -CONFIG_STM32_SPI3=n -CONFIG_STM32_USART2=n -CONFIG_STM32_USART3=n -CONFIG_STM32_UART4=n -CONFIG_STM32_UART5=n -CONFIG_STM32_I2C1=y -CONFIG_STM32_I2C2=n -CONFIG_STM32_I2C3=n -CONFIG_STM32_CAN1=n -CONFIG_STM32_CAN2=n -CONFIG_STM32_DAC=n -CONFIG_STM32_PWR=y -# APB2: -CONFIG_STM32_TIM1=n -CONFIG_STM32_TIM8=n -CONFIG_STM32_USART1=n -CONFIG_STM32_USART6=n -CONFIG_STM32_ADC1=n -CONFIG_STM32_ADC2=n -CONFIG_STM32_ADC3=n -CONFIG_STM32_SDIO=y -CONFIG_STM32_SPI1=n -CONFIG_STM32_SYSCFG=y -CONFIG_STM32_TIM9=n -CONFIG_STM32_TIM10=n -CONFIG_STM32_TIM11=n - -# -# Timer and I2C devices may need to the following to force power to be applied: -# -#CONFIG_STM32_FORCEPOWER=y - -# -# STM32F20xxx specific serial device driver settings -# -# CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the -# console and ttys0 (default is the USART1). -# CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received. -# This specific the size of the receive buffer -# CONFIG_USARTn_TXBUFSIZE - Characters are buffered before -# being sent. This specific the size of the transmit buffer -# CONFIG_USARTn_BAUD - The configure BAUD of the UART. Must be -# CONFIG_USARTn_BITS - The number of bits. Must be either 7 or 8. -# CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity -# CONFIG_USARTn_2STOP - Two stop bits -# -CONFIG_USART1_SERIAL_CONSOLE=n -CONFIG_USART2_SERIAL_CONSOLE=n -CONFIG_USART3_SERIAL_CONSOLE=n -CONFIG_USART4_SERIAL_CONSOLE=n -CONFIG_USART5_SERIAL_CONSOLE=n - -CONFIG_USART1_TXBUFSIZE=128 -CONFIG_USART2_TXBUFSIZE=128 -CONFIG_USART3_TXBUFSIZE=128 -CONFIG_USART4_TXBUFSIZE=128 -CONFIG_USART5_TXBUFSIZE=128 - -CONFIG_USART1_RXBUFSIZE=128 -CONFIG_USART2_RXBUFSIZE=128 -CONFIG_USART3_RXBUFSIZE=128 -CONFIG_USART4_RXBUFSIZE=128 -CONFIG_USART5_RXBUFSIZE=128 - -CONFIG_USART1_BAUD=115200 -CONFIG_USART2_BAUD=115200 -CONFIG_USART3_BAUD=115200 -CONFIG_USART4_BAUD=115200 -CONFIG_USART5_BAUD=115200 - -CONFIG_USART1_BITS=8 -CONFIG_USART2_BITS=8 -CONFIG_USART3_BITS=8 -CONFIG_USART4_BITS=8 -CONFIG_USART5_BITS=8 - -CONFIG_USART1_PARITY=0 -CONFIG_USART2_PARITY=0 -CONFIG_USART3_PARITY=0 -CONFIG_USART4_PARITY=0 -CONFIG_USART5_PARITY=0 - -CONFIG_USART1_2STOP=0 -CONFIG_USART2_2STOP=0 -CONFIG_USART3_2STOP=0 -CONFIG_USART4_2STOP=0 -CONFIG_USART5_2STOP=0 - -# -# STM32F20xxx specific SSI device driver settings -# -# CONFIG_SSIn_DISABLE - select to disable all support for -# the SSI -# CONFIG_SSI_POLLWAIT - Select to disable interrupt driven SSI support -# Poll-waiting is recommended if the interrupt rate would be to -# high in the interrupt driven case. -# CONFIG_SSI_TXLIMIT - Write this many words to the Tx FIFO before -# emptying the Rx FIFO. If the SPI frequency is high and this -# value is large, then larger values of this setting may cause -# Rx FIFO overrun errors. Default: half of the Tx FIFO size (4). -# -CONFIG_SSI0_DISABLE=n -CONFIG_SSI1_DISABLE=y -CONFIG_SSI_POLLWAIT=y -#CONFIG_SSI_TXLIMIT=4 - -# -# STM32F20xxx specific CAN device driver settings -# -# CONFIG_CAN - Enables CAN support (one or both of CONFIG_STM32_CAN1 or -# CONFIG_STM32_CAN2 must also be defined) -# CONFIG_CAN_EXTID - Enables support for the 29-bit extended ID. Default -# Standard 11-bit IDs. -# CONFIG_CAN_FIFOSIZE - The size of the circular buffer of CAN messages. -# Default: 8 -# CONFIG_CAN_NPENDINGRTR - The size of the list of pending RTR requests. -# Default: 4 -# CONFIG_CAN_LOOPBACK - A CAN driver may or may not support a loopback -# mode for testing. The STM32 CAN driver does support loopback mode. -# CONFIG_CAN1_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN1 is defined. -# CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined. -# CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6 -# CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7 -# -CONFIG_CAN=n -CONFIG_CAN_EXTID=n -#CONFIG_CAN_FIFOSIZE -#CONFIG_CAN_NPENDINGRTR -CONFIG_CAN_LOOPBACK=n -CONFIG_CAN1_BAUD=700000 -CONFIG_CAN2_BAUD=700000 - -# -# STM32F20xxx Ethernet device driver settings -# -# CONFIG_STM32_PHYADDR - The 5-bit address of the PHY on the board -# CONFIG_STM32_MII - Support Ethernet MII interface -# CONFIG_STM32_MII_MCO1 - Use MCO1 to clock the MII interface -# CONFIG_STM32_MII_MCO2 - Use MCO2 to clock the MII interface -# CONFIG_STM32_RMII - Support Ethernet RMII interface -# CONFIG_STM32_AUTONEG - Use PHY autonegotion to determine speed and mode -# CONFIG_STM32_ETHFD - If CONFIG_STM32_AUTONEG is not defined, then this -# may be defined to select full duplex mode. Default: half-duplex -# CONFIG_STM32_ETH100MBPS - If CONFIG_STM32_AUTONEG is not defined, then this -# may be defined to select 100 MBps speed. Default: 10 Mbps -# CONFIG_STM32_PHYSR - This must be provided if CONFIG_STM32_AUTONEG is -# defined. The PHY status register address may diff from PHY to PHY. This -# configuration sets the address of the PHY status register. -# CONFIG_STM32_PHYSR_SPEED - This must be provided if CONFIG_STM32_AUTONEG is -# defined. This provides bit mask indicating 10 or 100MBps speed. -# CONFIG_STM32_PHYSR_100MBPS - This must be provided if CONFIG_STM32_AUTONEG is -# defined. This provides the value of the speed bit(s) indicating 100MBps speed. -# CONFIG_STM32_PHYSR_MODE - This must be provided if CONFIG_STM32_AUTONEG is -# defined. This provide bit mask indicating full or half duplex modes. -# CONFIG_STM32_PHYSR_FULLDUPLEX - This must be provided if CONFIG_STM32_AUTONEG is -# defined. This provides the value of the mode bits indicating full duplex mode. -# CONFIG_STM32_ETH_PTP - Precision Time Protocol (PTP). Not supported -# but some hooks are indicated with this condition. -# CONFIG_STM32_ETHMAC_REGDEBUG - If CONFIG_DEBUG is also enabled, this will -# generate far more debug output than you could ever care to see unless you -# are debugging low-level Ethernet driver features. -# -CONFIG_STM32_PHYADDR=0x01 -CONFIG_STM32_MII=y -CONFIG_STM32_MII_MCO1=y -CONFIG_STM32_MII_MCO2=n -CONFIG_STM32_RMII=n -CONFIG_STM32_AUTONEG=y -#CONFIG_STM32_ETHFD -#CONFIG_STM32_ETH100MB -CONFIG_STM32_PHYSR=16 -CONFIG_STM32_PHYSR_SPEED=0x0002 -CONFIG_STM32_PHYSR_100MBPS=0x0000 -CONFIG_STM32_PHYSR_MODE=0x0004 -CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004 -CONFIG_STM32_ETH_PTP=n -CONFIG_STM32_ETHMAC_REGDEBUG=n - -# -# I2C configuration -# -CONFIG_I2C=y -CONFIG_I2C_POLLED=y -CONFIG_I2C_TRANSFER=y -CONFIG_I2C_TRACE=n - -# -# ADC configuration -# -# Enable ADC driver support. The STM3220G-EVAL has a 10 Kohm potentiometer -# RV1 connected to PF9 of STM32F207IGH6 on the board: TIM14_CH1/ SMC_CD/ADC3_IN7 -# In order to use the ADC, you must make the following selections: -# -# Above: -# CONFIG_STM32_ADC3=y : Enable ADC3 -# CONFIG_STM32_TIM1=y : Enable Timer 1 -# -# Below: -# CONFIG_ADC=y : Enable the generic ADC infrastructure -# CONFIG_STM32_TIM1_ADC=y : Indicate that timer 1 will be used to trigger an ADC -# CONFIG_STM32_TIM1_ADC3=y : Assign timer 1 to drive ADC3 sampling -# CONFIG_STM32_ADC3_SAMPLE_FREQUENCY=100 : Select a sampling frequency -# -CONFIG_ADC=n -#CONFIG_STM32_TIM1_ADC=y -CONFIG_STM32_TIM1_ADC3=y -CONFIG_STM32_ADC3_SAMPLE_FREQUENCY=100 - -# -# PWM configuration -# -# The STM3220G-Eval has no real on-board PWM devices, but the board can be configured to output -# a pulse train using several options (see board.h). Here the default setup is for TIM8, CH4. -# Don't forget to enable CONFIG_PWM and CONFIG_STM32_TIM8. -# -CONFIG_PWM=n -CONFIG_PWM_PULSECOUNT=y -CONFIG_STM32_TIM8_PWM=y -CONFIG_STM32_TIM8_CHANNEL=4 - -# -# General build options -# -# CONFIG_RRLOAD_BINARY - make the rrload binary format used with -# BSPs from www.ridgerun.com using the tools/mkimage.sh script -# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_RAW_BINARY - make a raw binary format file used with many -# different loaders using the GNU objcopy program. This option -# should not be selected if you are not using the GNU toolchain. -# CONFIG_HAVE_LIBM - toolchain supports libm.a -# -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=y -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=n -CONFIG_HAVE_LIBM=n - -# -# General OS setup -# -# CONFIG_APPS_DIR - Identifies the relative path to the directory -# that builds the application to link with NuttX. Default: ../apps -# CONFIG_DEBUG - enables built-in debug options -# CONFIG_DEBUG_VERBOSE - enables verbose debug output -# CONFIG_DEBUG_SYMBOLS - build without optimization and with -# debug symbols (needed for use with a debugger). -# CONFIG_HAVE_CXX - Enable support for C++ -# CONFIG_MM_REGIONS - If the architecture includes multiple -# regions of memory to allocate from, this specifies the -# number of memory regions that the memory manager must -# handle and enables the API mm_addregion(start, end); -# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot -# time console output -# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz -# or MSEC_PER_TICK=10. This setting may be defined to -# inform NuttX that the processor hardware is providing -# system timer interrupts at some interrupt interval other -# than 10 msec. -# CONFIG_RR_INTERVAL - The round robin timeslice will be set -# this number of milliseconds; Round robin scheduling can -# be disabled by setting this value to zero. -# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in -# scheduler to monitor system performance -# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a -# task name to save in the TCB. Useful if scheduler -# instrumentation is selected. Set to zero to disable. -# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - -# Used to initialize the internal time logic. -# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions. -# You would only need this if you are concerned about accurate -# time conversions in the past or in the distant future. -# CONFIG_JULIAN_TIME - Enables Julian time conversions. You -# would only need this if you are concerned about accurate -# time conversion in the distand past. You must also define -# CONFIG_GREGORIAN_TIME in order to use Julian time. -# CONFIG_DEV_CONSOLE - Set if architecture-specific logic -# provides /dev/console. Enables stdout, stderr, stdin. -# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console -# driver (minimul support) -# CONFIG_MUTEX_TYPES: Set to enable support for recursive and -# errorcheck mutexes. Enables pthread_mutexattr_settype(). -# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority -# inheritance on mutexes and semaphores. -# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority -# inheritance is enabled. It defines the maximum number of -# different threads (minus one) that can take counts on a -# semaphore with priority inheritance support. This may be -# set to zero if priority inheritance is disabled OR if you -# are only using semaphores as mutexes (only one holder) OR -# if no more than two threads participate using a counting -# semaphore. -# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, -# then this setting is the maximum number of higher priority -# threads (minus 1) than can be waiting for another thread -# to release a count on a semaphore. This value may be set -# to zero if no more than one thread is expected to wait for -# a semaphore. -# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors -# by task_create() when a new task is started. If set, all -# files/drivers will appear to be closed in the new task. -# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first -# three file descriptors (stdin, stdout, stderr) by task_create() -# when a new task is started. If set, all files/drivers will -# appear to be closed in the new task except for stdin, stdout, -# and stderr. -# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket -# desciptors by task_create() when a new task is started. If -# set, all sockets will appear to be closed in the new task. -# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to -# handle delayed processing from interrupt handlers. This feature -# is required for some drivers but, if there are not complaints, -# can be safely disabled. The worker thread also performs -# garbage collection -- completing any delayed memory deallocations -# from interrupt handlers. If the worker thread is disabled, -# then that clean will be performed by the IDLE thread instead -# (which runs at the lowest of priority and may not be appropriate -# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE -# is enabled, then the following options can also be used: -# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker -# thread. Default: 50 -# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for -# work in units of microseconds. Default: 50*1000 (50 MS). -# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker -# thread. Default: CONFIG_IDLETHREAD_STACKSIZE. -# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up -# the worker thread. Default: 4 -# CONFIG_SCHED_WAITPID - Enable the waitpid() API -# CONFIG_SCHED_ATEXIT - Enabled the atexit() API -# -#CONFIG_APPS_DIR= -CONFIG_DEBUG=y -CONFIG_DEBUG_VERBOSE=y -CONFIG_DEBUG_SYMBOLS=y -CONFIG_DEBUG_FS=n -CONFIG_DEBUG_GRAPHICS=n -CONFIG_DEBUG_LCD=n -CONFIG_DEBUG_USB=n -CONFIG_DEBUG_NET=y -CONFIG_DEBUG_RTC=n -CONFIG_DEBUG_ANALOG=n -CONFIG_DEBUG_PWM=n -CONFIG_DEBUG_CAN=n -CONFIG_DEBUG_I2C=n -CONFIG_HAVE_CXX=n -CONFIG_MM_REGIONS=1 -CONFIG_ARCH_LOWPUTC=y -CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n -CONFIG_TASK_NAME_SIZE=0 -CONFIG_START_YEAR=2011 -CONFIG_START_MONTH=12 -CONFIG_START_DAY=6 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n -CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=n -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n -CONFIG_SDCLONE_DISABLE=y -CONFIG_SCHED_WORKQUEUE=y -CONFIG_SCHED_WORKPRIORITY=192 -CONFIG_SCHED_WORKPERIOD=(50*1000) -CONFIG_SCHED_WORKSTACKSIZE=1024 -CONFIG_SIG_SIGWORK=4 -CONFIG_SCHED_WAITPID=y -CONFIG_SCHED_ATEXIT=n - -# -# System Logging -# -# CONFIG_SYSLOG - Enables the System Logging feature. -# CONFIG_RAMLOG - Enables the RAM logging feature -# CONFIG_RAMLOG_CONSOLE - Use the RAM logging device as a system console. -# If this feature is enabled (along with CONFIG_DEV_CONSOLE), then all -# console output will be re-directed to a circular buffer in RAM. This -# is useful, for example, if the only console is a Telnet console. Then -# in that case, console output from non-Telnet threads will go to the -# circular buffer and can be viewed using the NSH 'dmesg' command. -# CONFIG_RAMLOG_SYSLOG - Use the RAM logging device for the syslogging -# interface. If this feature is enabled (along with CONFIG_SYSLOG), -# then all debug output (only) will be re-directed to the circular -# buffer in RAM. This RAM log can be view from NSH using the 'dmesg' -# command. -# CONFIG_RAMLOG_NPOLLWAITERS - The number of threads than can be waiting -# for this driver on poll(). Default: 4 -# -# If CONFIG_RAMLOG_CONSOLE or CONFIG_RAMLOG_SYSLOG is selected, then the -# following may also be provided: -# -# CONFIG_RAMLOG_CONSOLE_BUFSIZE - Size of the console RAM log. Default: 1024 -# - -CONFIG_SYSLOG=y -CONFIG_RAMLOG=y -CONFIG_RAMLOG_CONSOLE=n -CONFIG_RAMLOG_SYSLOG=y -#CONFIG_RAMLOG_NPOLLWAITERS -#CONFIG_RAMLOG_CONSOLE_BUFSIZE - -# -# Settings for NXFLAT -# -# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. -# This format will support execution of NuttX binaries located -# in a ROMFS filesystem (see examples/nxflat). -# CONFIG_NXFLAT_DUMPBUFFER. Dump a most buffers that NXFFLAT deals -# with. CONFIG_DEBUG, CONFIG_DEBUG_VERBOSE, and -# CONFIG_DEBUG_BINFMT have to be defined or -# CONFIG_NXFLAT_DUMPBUFFER does nothing. -# CONFIG_SYMTAB_ORDEREDBYNAME. Select if the system symbol table -# is ordered by symbol name -# -CONFIG_NXFLAT=n -CONFIG_NXFLAT_DUMPBUFFER=n -CONFIG_SYMTAB_ORDEREDBYNAME=y - -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=n -CONFIG_DISABLE_ENVIRON=n -CONFIG_DISABLE_POLL=y - -# -# Misc libc settings -# -# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a -# little smaller if we do not support fieldwidthes -# -CONFIG_NOPRINTF_FIELDWIDTH=n - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve system performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n - -# -# Sizes of configurable things (0 disables) -# -# CONFIG_MAX_TASKS - The maximum number of simultaneously -# active tasks. This value must be a power of two. -# CONFIG_MAX_TASK_ARGS - This controls the maximum number of -# of parameters that a task may receive (i.e., maxmum value -# of 'argc') -# CONFIG_NPTHREAD_KEYS - The number of items of thread- -# specific data that can be retained -# CONFIG_NFILE_DESCRIPTORS - The maximum number of file -# descriptors (one for each open) -# CONFIG_NFILE_STREAMS - The maximum number of streams that -# can be fopen'ed -# CONFIG_NAME_MAX - The maximum size of a file name. -# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate -# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_STDIO_LINEBUFFER - If standard C buffered I/O is enabled -# (CONFIG_STDIO_BUFFER_SIZE > 0), then this option may be added -# to force automatic, line-oriented flushing the output buffer -# for putc(), fputc(), putchar(), puts(), fputs(), printf(), -# fprintf(), and vfprintf(). When a newline is encountered in -# the output string, the output buffer will be flushed. This -# (slightly) increases the NuttX footprint but supports the kind -# of behavior that people expect for printf(). -# CONFIG_NUNGET_CHARS - Number of characters that can be -# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message -# structures. The system manages a pool of preallocated -# message structures to minimize dynamic allocations -# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with -# a fixed payload size given by this settin (does not include -# other message structure overhead. -# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that -# can be passed to a watchdog handler -# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog -# structures. The system manages a pool of preallocated -# watchdog structures to minimize dynamic allocations -# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX -# timer structures. The system manages a pool of preallocated -# timer structures to minimize dynamic allocations. Set to -# zero for all dynamic allocations. -# -CONFIG_MAX_TASKS=16 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=4 -CONFIG_NFILE_DESCRIPTORS=8 -CONFIG_NFILE_STREAMS=8 -CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=256 -CONFIG_STDIO_LINEBUFFER=y -CONFIG_NUNGET_CHARS=2 -CONFIG_PREALLOC_MQ_MSGS=4 -CONFIG_MQ_MAXMSGSIZE=32 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=16 -CONFIG_PREALLOC_TIMERS=4 - -# -# Framebuffer driver options -# -CONFIG_FB_CMAP=n -CONFIG_FB_HWCURSOR=n -CONFIG_FB_HWCURSORIMAGE=n -#CONFIG_FB_HWCURSORSIZE -#CONFIG_FB_TRANSPARENCY - -# -# Filesystem configuration -# -# CONFIG_FS_FAT - Enable FAT filesystem support -# CONFIG_FAT_SECTORSIZE - Max supported sector size -# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3 -# file name support. -# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims -# patents on FAT long file name technology. Please read the -# disclaimer in the top-level COPYING file and only enable this -# feature if you understand these issues. -# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the -# default, maximum long file name is 255 bytes. This can eat up -# a lot of memory (especially stack space). If you are willing -# to live with some non-standard, short long file names, then -# define this value. A good choice would be the same value as -# selected for CONFIG_NAME_MAX which will limit the visibility -# of longer file names anyway. -# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support. -# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. -# This must have one of the values of 0xff or 0x00. -# Default: 0xff. -# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, -# don't both with file chunks smaller than this number of data bytes. -# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name. -# Default: 255. -# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, -# don't both with file chunks smaller than this number of data bytes. -# Default: 32. -# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean -# packing files together toward the end of the file or, if file are -# deleted at the end of the file, clean up can simply mean erasing -# the end of FLASH memory so that it can be re-used again. However, -# doing this can also harm the life of the FLASH part because it can -# mean that the tail end of the FLASH is re-used too often. This -# threshold determines if/when it is worth erased the tail end of FLASH -# and making it available for re-use (and possible over-wear). -# Default: 8192. -# CONFIG_FS_ROMFS - Enable ROMFS filesystem support -# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this -# option will enable a limited form of memory mapping that is -# implemented by copying whole files into memory. -# -CONFIG_FS_FAT=y -CONFIG_FAT_LCNAMES=y -CONFIG_FAT_LFN=y -CONFIG_FAT_MAXFNAME=32 -CONFIG_FS_NXFFS=n -CONFIG_FS_ROMFS=n - -# -# SPI-based MMC/SD driver -# -# CONFIG_MMCSD_NSLOTS -# Number of MMC/SD slots supported by the driver -# CONFIG_MMCSD_READONLY -# Provide read-only access (default is read/write) -# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card. -# Default is 20MHz. -# -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 - -# -# Block driver buffering -# -# CONFIG_FS_READAHEAD -# Enable read-ahead buffering -# CONFIG_FS_WRITEBUFFER -# Enable write buffering -# -CONFIG_FS_READAHEAD=n -CONFIG_FS_WRITEBUFFER=n - -# -# STM32 SDIO-based MMC/SD driver -# -# CONFIG_SDIO_DMA -# SDIO driver supports DMA -# CONFIG_SDIO_PRI - Select SDIO interrupt prority. Default: 128 -# CONFIG_SDIO_DMAPRIO - Select SDIO DMA interrupt priority. -# Default: Medium -# CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode. Default: -# 4-bit transfer mode. -# CONFIG_MMCSD_MMCSUPPORT -# Enable support for MMC cards -# CONFIG_MMCSD_HAVECARDDETECT -# SDIO driver card detection is 100% accurate -# -CONFIG_SDIO_DMA=n -#CONFIG_SDIO_PRI=128 -#CONFIG_SDIO_DMAPRIO -#CONFIG_SDIO_WIDTH_D1_ONLY -CONFIG_MMCSD_MMCSUPPORT=n -CONFIG_MMCSD_HAVECARDDETECT=n - -# -# SDIO-based MMC/SD driver -# -# CONFIG_SDIO_DMA -# SDIO driver supports DMA -# CONFIG_MMCSD_MMCSUPPORT -# Enable support for MMC cards -# CONFIG_MMCSD_HAVECARDDETECT -# SDIO driver card detection is 100% accurate -# -CONFIG_SDIO_DMA=n -CONFIG_MMCSD_MMCSUPPORT=n -CONFIG_MMCSD_HAVECARDDETECT=n - -# -# TCP/IP and UDP support via uIP -# -# CONFIG_NET - Enable or disable all network features -# CONFIG_NET_NOINTS - uIP not called from interrupt level. -# CONFIG_NET_MULTIBUFFER - Use multiple input/output buffers (probably no) -# CONFIG_NET_IPv6 - Build in support for IPv6 -# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread. -# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options -# CONFIG_NET_BUFSIZE - uIP buffer size -# CONFIG_NET_TCP - TCP support on or off -# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks) -# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers -# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero) -# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until -# accept() is called. The size of the backlog is selected when listen() is called. -# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks) -# CONFIG_NET_UDP - UDP support on or off -# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off -# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections -# CONFIG_NET_ICMP - ICMP ping response support on or off -# CONFIG_NET_ICMP_PING - ICMP ping request support on or off -# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address -# CONFIG_NET_STATISTICS - uIP statistics on or off -# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window -# CONFIG_NET_BROADCAST - Broadcast support -# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table -# CONFIG_NET_ARP_IPIN - Harvest IP/MAC address mappings from the ARP table -# from incoming IP packets. -# CONFIG_NET_MULTICAST - Outgoing multi-cast address support -# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when -# looking for duplicates -# -CONFIG_NET=y -CONFIG_NET_NOINTS=n -CONFIG_NET_MULTIBUFFER=y -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=10 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=562 -CONFIG_NET_TCP=y -CONFIG_NET_TCP_CONNS=40 -#CONFIG_NET_TCP_READAHEAD_BUFSIZE -CONFIG_NET_NTCP_READAHEAD_BUFFERS=16 -CONFIG_NET_TCPBACKLOG=y -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=y -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=y -CONFIG_NET_ICMP_PING=y -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -CONFIG_NET_BROADCAST=n -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_ARP_IPIN=n -CONFIG_NET_MULTICAST=n -#CONFIG_NET_FWCACHE_SIZE=2 - -# -# UIP Network Utilities -# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP -# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries -# -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 - -# -# FTP Server -# -# CONFIG_FTPD_VENDORID - The vendor name to use in FTP communications. -# Default: "NuttX" -# CONFIG_FTPD_SERVERID - The server name to use in FTP communications. -# Default: "NuttX FTP Server" -# CONFIG_FTPD_CMDBUFFERSIZE - The maximum size of one command. Default: -# 512 bytes. -# CONFIG_FTPD_DATABUFFERSIZE - The size of the I/O buffer for data -# transfers. Default: 2048 bytes. -# CONFIG_FTPD_WORKERSTACKSIZE - The stacksize to allocate for each -# FTP daemon worker thread. Default: 2048 bytes. -# -# Other required configuration settings: Of course TCP networking support -# is required. But here are a couple that are less obvious: -# -# CONFIG_DISABLE_PTHREAD - pthread support is required -# CONFIG_DISABLE_POLL - poll() support is required -# - -# -# RTC Configuration -# -# CONFIG_RTC - Enables general support for a hardware RTC. Specific -# architectures may require other specific settings. -# CONFIG_RTC_DATETIME - There are two general types of RTC: (1) A simple -# battery backed counter that keeps the time when power is down, and (2) -# A full date / time RTC the provides the date and time information, often -# in BCD format. If CONFIG_RTC_DATETIME is selected, it specifies this -# second kind of RTC. In this case, the RTC is used to "seed" the normal -# NuttX timer and the NuttX system timer provides for higher resoution -# time. -# CONFIG_RTC_HIRES - If CONFIG_RTC_DATETIME not selected, then the simple, -# battery backed counter is used. There are two different implementations -# of such simple counters based on the time resolution of the counter: -# The typical RTC keeps time to resolution of 1 second, usually -# supporting a 32-bit time_t value. In this case, the RTC is used to -# "seed" the normal NuttX timer and the NuttX timer provides for higher -# resoution time. If CONFIG_RTC_HIRES is enabled in the NuttX configuration, -# then the RTC provides higher resolution time and completely replaces the -# system timer for purpose of date and time. -# CONFIG_RTC_FREQUENCY - If CONFIG_RTC_HIRES is defined, then the frequency -# of the high resolution RTC must be provided. If CONFIG_RTC_HIRES is -# not defined, CONFIG_RTC_FREQUENCY is assumed to be one. -# CONFIG_RTC_ALARM - Enable if the RTC hardware supports setting of an -# alarm. A callback function will be executed when the alarm goes off -# -CONFIG_RTC=y -CONFIG_RTC_DATETIME=y -CONFIG_RTC_HIRES=n -CONFIG_RTC_FREQUENCY=n -CONFIG_RTC_ALARM=n - -# -# USB Device Configuration -# -# CONFIG_USBDEV -# Enables USB device support -# CONFIG_USBDEV_ISOCHRONOUS -# Build in extra support for isochronous endpoints -# CONFIG_USBDEV_DUALSPEED -# Hardware handles high and full speed operation (USB 2.0) -# CONFIG_USBDEV_SELFPOWERED -# Will cause USB features to indicate that the device is -# self-powered -# CONFIG_USBDEV_MAXPOWER -# Maximum power consumption in mA -# CONFIG_USBDEV_TRACE -# Enables USB tracing for debug -# CONFIG_USBDEV_TRACE_NRECORDS -# Number of trace entries to remember -# -CONFIG_USBDEV=n -CONFIG_USBDEV_ISOCHRONOUS=n -CONFIG_USBDEV_DUALSPEED=n -CONFIG_USBDEV_SELFPOWERED=y -CONFIG_USBDEV_REMOTEWAKEUP=n -CONFIG_USBDEV_MAXPOWER=100 -CONFIG_USBDEV_TRACE=n -CONFIG_USBDEV_TRACE_NRECORDS=128 - -# -# USB Serial Device Configuration -# -# CONFIG_PL2303 -# Enable compilation of the USB serial driver -# CONFIG_PL2303_EPINTIN -# The logical 7-bit address of a hardware endpoint that supports -# interrupt IN operation -# CONFIG_PL2303_EPBULKOUT -# The logical 7-bit address of a hardware endpoint that supports -# bulk OUT operation -# CONFIG_PL2303_EPBULKIN -# The logical 7-bit address of a hardware endpoint that supports -# bulk IN operation -# # CONFIG_PL2303_NWRREQS and CONFIG_PL2303_NRDREQS -# The number of write/read requests that can be in flight -# CONFIG_PL2303_VENDORID and CONFIG_PL2303_VENDORSTR -# The vendor ID code/string -# CONFIG_PL2303_PRODUCTID and CONFIG_PL2303_PRODUCTSTR -# The product ID code/string -# CONFIG_PL2303_RXBUFSIZE and CONFIG_PL2303_TXBUFSIZE -# Size of the serial receive/transmit buffers -# -CONFIG_PL2303=n -CONFIG_PL2303_EPINTIN=1 -CONFIG_PL2303_EPBULKOUT=2 -CONFIG_PL2303_EPBULKIN=3 -CONFIG_PL2303_NWRREQS=4 -CONFIG_PL2303_NRDREQS=4 -CONFIG_PL2303_VENDORID=0x067b -CONFIG_PL2303_PRODUCTID=0x2303 -CONFIG_PL2303_VENDORSTR="Nuttx" -CONFIG_PL2303_PRODUCTSTR="USBdev Serial" -CONFIG_PL2303_RXBUFSIZE=512 -CONFIG_PL2303_TXBUFSIZE=512 - -# -# USB Storage Device Configuration -# -# CONFIG_USBMSC -# Enable compilation of the USB storage driver -# CONFIG_USBMSC_EP0MAXPACKET -# Max packet size for endpoint 0 -# CONFIG_USBMSC_EPBULKOUT and CONFIG_USBMSC_EPBULKIN -# The logical 7-bit address of a hardware endpoints that support -# bulk OUT and IN operations -# CONFIG_USBMSC_NWRREQS and CONFIG_USBMSC_NRDREQS -# The number of write/read requests that can be in flight -# CONFIG_USBMSC_BULKINREQLEN and CONFIG_USBMSC_BULKOUTREQLEN -# The size of the buffer in each write/read request. This -# value needs to be at least as large as the endpoint -# maxpacket and ideally as large as a block device sector. -# CONFIG_USBMSC_VENDORID and CONFIG_USBMSC_VENDORSTR -# The vendor ID code/string -# CONFIG_USBMSC_PRODUCTID and CONFIG_USBMSC_PRODUCTSTR -# The product ID code/string -# CONFIG_USBMSC_REMOVABLE -# Select if the media is removable -# -CONFIG_USBMSC=n -CONFIG_USBMSC_EP0MAXPACKET=64 -CONFIG_USBMSC_EPBULKOUT=2 -CONFIG_USBMSC_EPBULKIN=5 -CONFIG_USBMSC_NRDREQS=2 -CONFIG_USBMSC_NWRREQS=2 -CONFIG_USBMSC_BULKINREQLEN=256 -CONFIG_USBMSC_BULKOUTREQLEN=256 -CONFIG_USBMSC_VENDORID=0x584e -CONFIG_USBMSC_VENDORSTR="NuttX" -CONFIG_USBMSC_PRODUCTID=0x5342 -CONFIG_USBMSC_PRODUCTSTR="USBdev Storage" -CONFIG_USBMSC_VERSIONNO=0x0399 -CONFIG_USBMSC_REMOVABLE=y - -# -# Graphics related configuration settings -# -# CONFIG_NX -# Enables overall support for graphics library and NX -# CONFIG_NX_MULTIUSER -# Configures NX in multi-user mode -# CONFIG_NX_NPLANES -# Some YUV color formats requires support for multiple planes, -# one for each color component. Unless you have such special -# hardware, this value should be undefined or set to 1 -# CONFIG_NX_DISABLE_1BPP, CONFIG_NX_DISABLE_2BPP, -# CONFIG_NX_DISABLE_4BPP, CONFIG_NX_DISABLE_8BPP, -# CONFIG_NX_DISABLE_16BPP, CONFIG_NX_DISABLE_24BPP, and -# CONFIG_NX_DISABLE_32BPP -# NX supports a variety of pixel depths. You can save some -# memory by disabling support for unused color depths. -# CONFIG_NX_PACKEDMSFIRST -# If a pixel depth of less than 8-bits is used, then NX needs -# to know if the pixels pack from the MS to LS or from LS to MS -# CONFIG_NX_LCDDRIVER -# By default, NX builds to use a framebuffer driver (see -# include/nuttx/fb.h). If this option is defined, NX will -# build to use an LCD driver (see include/nuttx/lcd/lcd.h). -# CONFIG_LCD_MAXPOWER - The full-on power setting for an LCD device. -# CONFIG_LCD_MAXCONTRAST - The maximum contrast value for an LCD device. -# CONFIG_NX_MOUSE -# Build in support for mouse input -# CONFIG_NX_KBD -# Build in support of keypad/keyboard input -# CONFIG_NXTK_BORDERWIDTH -# Specifies with with of the border (in pixels) used with -# framed windows. The default is 4. -# CONFIG_NXTK_BORDERCOLOR1 and CONFIG_NXTK_BORDERCOLOR2 -# Specify the colors of the border used with framed windows. -# CONFIG_NXTK_BORDERCOLOR2 is the shadow side color and so -# is normally darker. The default is medium and dark grey, -# respectively -# CONFIG_NXTK_AUTORAISE -# If set, a window will be raised to the top if the mouse position -# is over a visible portion of the window. Default: A mouse -# button must be clicked over a visible portion of the window. -# CONFIG_NXFONTS_CHARBITS -# The number of bits in the character set. Current options are -# only 7 and 8. The default is 7. -# CONFIG_NXFONT_SANS17X22 -# This option enables support for a tiny, 17x22 san serif font -# (font ID FONTID_SANS17X22 == 14). -# CONFIG_NXFONT_SANS20X26 -# This option enables support for a tiny, 20x26 san serif font -# (font ID FONTID_SANS20X26 == 15). -# CONFIG_NXFONT_SANS23X27 -# This option enables support for a tiny, 23x27 san serif font -# (font ID FONTID_SANS23X27 == 1). -# CONFIG_NXFONT_SANS22X29 -# This option enables support for a small, 22x29 san serif font -# (font ID FONTID_SANS22X29 == 2). -# CONFIG_NXFONT_SANS28X37 -# This option enables support for a medium, 28x37 san serif font -# (font ID FONTID_SANS28X37 == 3). -# CONFIG_NXFONT_SANS39X48 -# This option enables support for a large, 39x48 san serif font -# (font ID FONTID_SANS39X48 == 4). -# CONFIG_NXFONT_SANS17X23B -# This option enables support for a tiny, 17x23 san serif bold font -# (font ID FONTID_SANS17X23B == 16). -# CONFIG_NXFONT_SANS20X27B -# This option enables support for a tiny, 20x27 san serif bold font -# (font ID FONTID_SANS20X27B == 17). -# CONFIG_NXFONT_SANS22X29B -# This option enables support for a small, 22x29 san serif bold font -# (font ID FONTID_SANS22X29B == 5). -# CONFIG_NXFONT_SANS28X37B -# This option enables support for a medium, 28x37 san serif bold font -# (font ID FONTID_SANS28X37B == 6). -# CONFIG_NXFONT_SANS40X49B -# This option enables support for a large, 40x49 san serif bold font -# (font ID FONTID_SANS40X49B == 7). -# CONFIG_NXFONT_SERIF22X29 -# This option enables support for a small, 22x29 font (with serifs) -# (font ID FONTID_SERIF22X29 == 8). -# CONFIG_NXFONT_SERIF29X37 -# This option enables support for a medium, 29x37 font (with serifs) -# (font ID FONTID_SERIF29X37 == 9). -# CONFIG_NXFONT_SERIF38X48 -# This option enables support for a large, 38x48 font (with serifs) -# (font ID FONTID_SERIF38X48 == 10). -# CONFIG_NXFONT_SERIF22X28B -# This option enables support for a small, 27x38 bold font (with serifs) -# (font ID FONTID_SERIF22X28B == 11). -# CONFIG_NXFONT_SERIF27X38B -# This option enables support for a medium, 27x38 bold font (with serifs) -# (font ID FONTID_SERIF27X38B == 12). -# CONFIG_NXFONT_SERIF38X49B -# This option enables support for a large, 38x49 bold font (with serifs) -# (font ID FONTID_SERIF38X49B == 13). -# -# NX Multi-user only options: -# -# CONFIG_NX_BLOCKING -# Open the client message queues in blocking mode. In this case, -# nx_eventhandler() will not return until a message is received and processed. -# CONFIG_NX_MXSERVERMSGS and CONFIG_NX_MXCLIENTMSGS -# Specifies the maximum number of messages that can fit in -# the message queues. No additional resources are allocated, but -# this can be set to prevent flooding of the client or server with -# too many messages (CONFIG_PREALLOC_MQ_MSGS controls how many -# messages are pre-allocated). -# -CONFIG_NX=n -CONFIG_NX_MULTIUSER=n -CONFIG_NX_NPLANES=1 -CONFIG_NX_DISABLE_1BPP=y -CONFIG_NX_DISABLE_2BPP=y -CONFIG_NX_DISABLE_4BPP=y -CONFIG_NX_DISABLE_8BPP=y -CONFIG_NX_DISABLE_16BPP=n -CONFIG_NX_DISABLE_24BPP=y -CONFIG_NX_DISABLE_32BPP=y -CONFIG_NX_PACKEDMSFIRST=n -CONFIG_NX_LCDDRIVER=y -CONFIG_LCD_MAXPOWER=1 -CONFIG_LCD_MAXCONTRAST=1 -CONFIG_NX_MOUSE=y -CONFIG_NX_KBD=y -#CONFIG_NXTK_BORDERWIDTH=4 -CONFIG_NXTK_BORDERCOLOR1=0xd69a -CONFIG_NXTK_BORDERCOLOR2=0xad55 -CONFIG_NXTK_AUTORAISE=n -CONFIG_NXFONT_SANS17X22=y -CONFIG_NXFONT_SANS20X26=n -CONFIG_NXFONT_SANS22X29=n -CONFIG_NXFONT_SANS23X27=n -CONFIG_NXFONT_SANS28X37=n -CONFIG_NXFONT_SANS17X23B=n -CONFIG_NXFONT_SANS20X27B=y -CONFIG_NXFONT_SANS22X29B=y -CONFIG_NXFONT_SANS28X37B=n -CONFIG_NXFONT_SANS40X49B=n -CONFIG_NXFONT_SERIF22X29=n -CONFIG_NXFONT_SERIF29X37=n -CONFIG_NXFONT_SERIF38X48=n -CONFIG_NXFONT_SERIF22X28B=n -CONFIG_NXFONT_SERIF27X38B=n -CONFIG_NXFONT_SERIF38X49B=n -CONFIG_NXFONTS_CHARBITS=7 -CONFIG_NX_BLOCKING=y -CONFIG_NX_MXSERVERMSGS=32 -CONFIG_NX_MXCLIENTMSGS=16 - -# -# Settings for examples/uip -# -CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_EXAMPLE_UIP_DHCPC=n - -# -# Settings for examples/nettest -CONFIG_EXAMPLE_NETTEST_SERVER=n -CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLE_NETTEST_NOMAC=y -CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1) - -# -# Settings for examples/ostest -# -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 - -# -# Settings for apps/nshlib -# -# CONFIG_NSH_BUILTIN_APPS - Support external registered, -# "named" applications that can be executed from the NSH -# command line (see apps/README.txt for more information). -# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer -# CONFIG_NSH_STRERROR - Use strerror(errno) -# CONFIG_NSH_LINELEN - Maximum length of one command line -# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi -# CONFIG_NSH_DISABLESCRIPT - Disable scripting support -# CONFIG_NSH_DISABLEBG - Disable background commands -# CONFIG_NSH_ROMFSETC - Use startup script in /etc -# CONFIG_NSH_CONSOLE - Use serial console front end -# CONFIG_NSH_TELNET - Use telnetd console front end -# CONFIG_NSH_ARCHINIT - Platform provides architecture -# specific initialization (nsh_archinitialize()). -# -# If CONFIG_NSH_TELNET is selected: -# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size -# CONFIG_NSH_DHCPC - Obtain address using DHCP -# CONFIG_NSH_IPADDR - Provides static IP address -# CONFIG_NSH_DRIPADDR - Provides static router IP address -# CONFIG_NSH_NETMASK - Provides static network mask -# CONFIG_NSH_NOMAC - Use a bogus MAC address -# -# If CONFIG_NSH_ROMFSETC is selected: -# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint -# CONFIG_NSH_INITSCRIPT - Relative path to init script -# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor -# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size -# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor -# CONFIG_NSH_FATSECTSIZE - FAT FS sector size -# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors -# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint -# -CONFIG_NSH_BUILTIN_APPS=y -CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=y -CONFIG_NSH_ARCHINIT=y -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=y -CONFIG_NSH_IPADDR=(192<<24|168<<16|13<<8|161) -CONFIG_NSH_DRIPADDR=(192<<24|168<<16|13<<8|1) -CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT=/tmp - -# -# Architecture-specific NSH options -# -CONFIG_NSH_MMCSDSPIPORTNO=0 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 - -# -# I2C tool settings -# -# CONFIG_I2CTOOL_BUILTIN - Build the tools as an NSH built-in command -# CONFIG_I2CTOOL_MINBUS - Smallest bus index supported by the hardware (default 0). -# CONFIG_I2CTOOL_MAXBUS - Largest bus index supported by the hardware (default 3) -# CONFIG_I2CTOOL_MINADDR - Minium device address (default: 0x03) -# CONFIG_I2CTOOL_MAXADDR - Largest device address (default: 0x77) -# CONFIG_I2CTOOL_MAXREGADDR - Largest register address (default: 0xff) -# CONFIG_I2CTOOL_DEFFREQ - Default frequency (default: 1000000) -# -CONFIG_I2CTOOL_BUILTIN=y -CONFIG_I2CTOOL_MINBUS=1 -CONFIG_I2CTOOL_MAXBUS=3 -#CONFIG_I2CTOOL_MINADDR -#CONFIG_I2CTOOL_MAXADDR -#CONFIG_I2CTOOL_MAXREGADDR -CONFIG_I2CTOOL_DEFFREQ=100000 - -# -# Settings for examples/usbserial -# -# CONFIG_EXAMPLES_USBSERIAL_INONLY -# Only verify IN (device-to-host) data transfers. Default: both -# CONFIG_EXAMPLES_USBSERIAL_OUTONLY -# Only verify OUT (host-to-device) data transfers. Default: both -# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL -# Send only small, single packet messages. Default: Send large and small. -# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG -# Send only large, multi-packet messages. Default: Send large and small. -# -CONFIG_EXAMPLES_USBSERIAL_INONLY=n -CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n -CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n -CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n - -CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n -CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n -CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n -CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n - -# -# Settings for examples/adc -# -# CONFIG_ADC - Enabled ADC support -# CONFIG_NSH_BUILTIN_APPS - Build the ADC test as an NSH built-in function. -# Default: Built as a standalone problem -# -# CONFIG_EXAMPLES_ADC_DEVPATH - The path to the ADC device. Default: /dev/adc0 -# CONFIG_EXAMPLES_ADC_NSAMPLES - If CONFIG_NSH_BUILTIN_APPS -# is defined, then the number of samples is provided on the command line -# and this value is ignored. Otherwise, this number of samples is -# collected and the program terminates. Default: Samples are collected -# indefinitely. -# CONFIG_EXAMPLES_ADC_GROUPSIZE - The number of samples to read at once. -# Default: 4 - -# -# Settings for examples/can -# -# CONFIG_CAN - Enables CAN support. -# CONFIG_CAN_LOOPBACK - A CAN driver may or may not support a loopback -# mode for testing. The STM32 CAN driver does support loopback mode. -# CONFIG_NSH_BUILTIN_APPS - Build the CAN test as an NSH built-in function. -# Default: Built as a standalone problem -# -# CONFIG_EXAMPLES_CAN_DEVPATH - The path to the CAN device. Default: /dev/can0 -# CONFIG_EXAMPLES_CAN_NMSGS - If CONFIG_NSH_BUILTIN_APPS -# is defined, then the number of loops is provided on the command line -# and this value is ignored. Otherwise, this number of CAN message is -# collected and the program terminates. Default: If built as an NSH -# built-in, the default is 32. Otherwise messages are sent and received -# indefinitely. - -# -# Settings for examples/pwm -# -# CONFIG_PWM - Enables PWM support. -# CONFIG_NSH_BUILTIN_APPS - Build the PWM test as an NSH built-in function. -# Default: Not built! The example can only be used as an NSH built-in -# application -# -# CONFIG_EXAMPLES_PWM_DEVPATH - The path to the PWM device. Default: /dev/pwm0 -# CONFIG_EXAMPLES_PWM_FREQUENCY - The initial PWM frequency. Default: 100 Hz -# CONFIG_EXAMPLES_PWM_DUTYPCT - The initial PWM duty as a percentage. Default: 50% -# CONFIG_EXAMPLES_PWM_DURATION - The initial PWM pulse train duration in sectonds. -# as a percentage. Default: 5 seconds - -# -# Settings for examples/ftpd -# -# CONFIG_EXAMPLES_FTPD_PRIO - Priority of the FTP daemon. -# Default: SCHED_PRIORITY_DEFAULT -# CONFIG_EXAMPLES_FTPD_STACKSIZE - Stack size allocated for the -# FTP daemon. Default: 2048 -# CONFIG_EXAMPLES_FTPD_NONETINIT - Define to suppress configuration of the -# network by apps/examples/ftpd. You would need to suppress network -# configuration if the network is configuration prior to running the -# example. -# -# NSH always initializes the network so if CONFIG_NSH_BUILTIN_APPS is -# defined, so is CONFIG_EXAMPLES_FTPD_NONETINIT (se it does not explicitly -# need to be defined in that case): -# -# CONFIG_NSH_BUILTIN_APPS - Build the FTPD daemon example test as an -# NSH built-in function. By default the FTPD daemon will be built -# as a standalone application. -# -# If CONFIG_EXAMPLES_FTPD_NONETINIT is not defined, then the following may -# be specified to customized the network configuration: -# -# CONFIG_EXAMPLE_FTPD_NOMAC - If the hardware has no MAC address of its -# own, define this =y to provide a bogus address for testing. -# CONFIG_EXAMPLE_FTPD_IPADDR - The target IP address. Default 10.0.0.2 -# CONFIG_EXAMPLE_FTPD_DRIPADDR - The default router address. Default -# 10.0.0.1 -# CONFIG_EXAMPLE_FTPD_NETMASK - The network mask. Default: 255.255.255.0 - -# -# Stack and heap information -# -# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP -# operation from FLASH but must copy initialized .data sections to RAM. -# (should also be =n for the STM3220G-EVAL which always runs from flash) -# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH -# but copy themselves entirely into RAM for better performance. -# CONFIG_CUSTOM_STACK - The up_ implementation will handle -# all stack operations outside of the nuttx model. -# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) -# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. -# This is the thread that (1) performs the inital boot of the system up -# to the point where user_start() is spawned, and (2) there after is the -# IDLE thread that executes only when there is no other thread ready to -# run. -# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate -# for the main user thread that begins at the user_start() entry point. -# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size -# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size -# CONFIG_HEAP_BASE - The beginning of the heap -# CONFIG_HEAP_SIZE - The size of the heap -# -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_STACK_POINTER= -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 -CONFIG_HEAP_BASE= -CONFIG_HEAP_SIZE= diff --git a/nuttx/configs/stm3220g-eval/nsh2/defconfig~.bak b/nuttx/configs/stm3220g-eval/nsh2/defconfig~.bak deleted file mode 100644 index bb4453e7c..000000000 --- a/nuttx/configs/stm3220g-eval/nsh2/defconfig~.bak +++ /dev/null @@ -1,1424 +0,0 @@ -############################################################################ -# configs/stm3220g-eval/nsh2/defconfig -# -# Copyright (C) 2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# architecture selection -# -# CONFIG_ARCH - identifies the arch subdirectory and, hence, the -# processor architecture. -# CONFIG_ARCH_family - for use in C code. This identifies the -# particular chip family that the architecture is implemented -# in. -# CONFIG_ARCH_architecture - for use in C code. This identifies the -# specific architecture within the chip familyl. -# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory -# CONFIG_ARCH_CHIP_name - For use in C code -# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, -# the board that supports the particular chip or SoC. -# CONFIG_ARCH_BOARD_name - for use in C code -# CONFIG_ENDIAN_BIG - define if big endian (default is little endian) -# CONFIG_BOARD_LOOPSPERMSEC - for delay loops -# CONFIG_DRAM_SIZE - Describes the installed DRAM. -# CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM -# CONFIG_ARCH_IRQPRIO - The STM3220xxx supports interrupt prioritization -# CONFIG_ARCH_FPU - The STM3220xxx supports a floating point unit (FPU) -# (But, unfortunately, GCC does not support it). -# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt -# stack. If defined, this symbol is the size of the interrupt -# stack in bytes. If not defined, the user task stacks will be -# used during interrupt handling. -# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions -# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader. -# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. -# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture. -# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that -# cause a 100 second delay during boot-up. This 100 second delay -# serves no purpose other than it allows you to calibrate -# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until -# the delay actually is 100 seconds. -# CONFIG_ARCH_DMA - Support DMA initialization -# -CONFIG_ARCH=arm -CONFIG_ARCH_ARM=y -CONFIG_ARCH_CORTEXM3=y -CONFIG_ARCH_CHIP=stm32 -CONFIG_ARCH_CHIP_STM32F207IG=y -CONFIG_ARCH_BOARD=stm3220g-eval -CONFIG_ARCH_BOARD_STM3220G_EVAL=y -CONFIG_BOARD_LOOPSPERMSEC=16717 -CONFIG_DRAM_SIZE=0x00030000 -CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_FPU=n -CONFIG_ARCH_INTERRUPTSTACK=n -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_BOOTLOADER=n -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_BUTTONS=n -CONFIG_ARCH_CALIBRATION=n -CONFIG_ARCH_DMA=n - -# -# Identify toolchain and linker options -# -CONFIG_STM32_CODESOURCERYW=n -CONFIG_STM32_CODESOURCERYL=n -CONFIG_STM32_DEVKITARM=n -CONFIG_STM32_RAISONANCE=n -CONFIG_STM32_BUILDROOT=y - -# -# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled): -# -# CONFIG_STM32_DFU - Use the DFU bootloader, not JTAG -# -# JTAG Enable options: -# -# CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) -# CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) -# but without JNTRST. -# CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled -# -CONFIG_STM32_DFU=n -CONFIG_STM32_JTAG_FULL_ENABLE=y -CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n -CONFIG_STM32_JTAG_SW_ENABLE=n - -# -# Individual subsystems can be enabled: -# -# Individual subsystems can be enabled: -# AHB1: -CONFIG_STM32_CRC=n -CONFIG_STM32_BKPSRAM=n -CONFIG_STM32_CCMDATARAM=n -CONFIG_STM32_DMA1=n -CONFIG_STM32_DMA2=n -CONFIG_STM32_ETHMAC=y -CONFIG_STM32_OTGHS=n -# AHB2: -CONFIG_STM32_DCMI=n -CONFIG_STM32_CRYP=n -CONFIG_STM32_HASH=n -CONFIG_STM32_RNG=n -CONFIG_STM32_OTGFS=n -# AHB3: -CONFIG_STM32_FSMC=n -# APB1: -CONFIG_STM32_TIM2=n -CONFIG_STM32_TIM3=n -CONFIG_STM32_TIM4=n -CONFIG_STM32_TIM5=n -CONFIG_STM32_TIM6=n -CONFIG_STM32_TIM7=n -CONFIG_STM32_TIM12=n -CONFIG_STM32_TIM13=n -CONFIG_STM32_TIM14=n -CONFIG_STM32_WWDG=n -CONFIG_STM32_SPI2=n -CONFIG_STM32_SPI3=n -CONFIG_STM32_USART2=n -CONFIG_STM32_USART3=n -CONFIG_STM32_UART4=n -CONFIG_STM32_UART5=n -CONFIG_STM32_I2C1=y -CONFIG_STM32_I2C2=n -CONFIG_STM32_I2C3=n -CONFIG_STM32_CAN1=n -CONFIG_STM32_CAN2=n -CONFIG_STM32_DAC=n -CONFIG_STM32_PWR=y -# APB2: -CONFIG_STM32_TIM1=n -CONFIG_STM32_TIM8=n -CONFIG_STM32_USART1=n -CONFIG_STM32_USART6=n -CONFIG_STM32_ADC1=n -CONFIG_STM32_ADC2=n -CONFIG_STM32_ADC3=n -CONFIG_STM32_SDIO=y -CONFIG_STM32_SPI1=n -CONFIG_STM32_SYSCFG=y -CONFIG_STM32_TIM9=n -CONFIG_STM32_TIM10=n -CONFIG_STM32_TIM11=n - -# -# Timer and I2C devices may need to the following to force power to be applied: -# -#CONFIG_STM32_FORCEPOWER=y - -# -# STM32F20xxx specific serial device driver settings -# -# CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the -# console and ttys0 (default is the USART1). -# CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received. -# This specific the size of the receive buffer -# CONFIG_USARTn_TXBUFSIZE - Characters are buffered before -# being sent. This specific the size of the transmit buffer -# CONFIG_USARTn_BAUD - The configure BAUD of the UART. Must be -# CONFIG_USARTn_BITS - The number of bits. Must be either 7 or 8. -# CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity -# CONFIG_USARTn_2STOP - Two stop bits -# -CONFIG_USART1_SERIAL_CONSOLE=n -CONFIG_USART2_SERIAL_CONSOLE=n -CONFIG_USART3_SERIAL_CONSOLE=n -CONFIG_USART4_SERIAL_CONSOLE=n -CONFIG_USART5_SERIAL_CONSOLE=n - -CONFIG_USART1_TXBUFSIZE=128 -CONFIG_USART2_TXBUFSIZE=128 -CONFIG_USART3_TXBUFSIZE=128 -CONFIG_USART4_TXBUFSIZE=128 -CONFIG_USART5_TXBUFSIZE=128 - -CONFIG_USART1_RXBUFSIZE=128 -CONFIG_USART2_RXBUFSIZE=128 -CONFIG_USART3_RXBUFSIZE=128 -CONFIG_USART4_RXBUFSIZE=128 -CONFIG_USART5_RXBUFSIZE=128 - -CONFIG_USART1_BAUD=115200 -CONFIG_USART2_BAUD=115200 -CONFIG_USART3_BAUD=115200 -CONFIG_USART4_BAUD=115200 -CONFIG_USART5_BAUD=115200 - -CONFIG_USART1_BITS=8 -CONFIG_USART2_BITS=8 -CONFIG_USART3_BITS=8 -CONFIG_USART4_BITS=8 -CONFIG_USART5_BITS=8 - -CONFIG_USART1_PARITY=0 -CONFIG_USART2_PARITY=0 -CONFIG_USART3_PARITY=0 -CONFIG_USART4_PARITY=0 -CONFIG_USART5_PARITY=0 - -CONFIG_USART1_2STOP=0 -CONFIG_USART2_2STOP=0 -CONFIG_USART3_2STOP=0 -CONFIG_USART4_2STOP=0 -CONFIG_USART5_2STOP=0 - -# -# STM32F20xxx specific SSI device driver settings -# -# CONFIG_SSIn_DISABLE - select to disable all support for -# the SSI -# CONFIG_SSI_POLLWAIT - Select to disable interrupt driven SSI support -# Poll-waiting is recommended if the interrupt rate would be to -# high in the interrupt driven case. -# CONFIG_SSI_TXLIMIT - Write this many words to the Tx FIFO before -# emptying the Rx FIFO. If the SPI frequency is high and this -# value is large, then larger values of this setting may cause -# Rx FIFO overrun errors. Default: half of the Tx FIFO size (4). -# -CONFIG_SSI0_DISABLE=n -CONFIG_SSI1_DISABLE=y -CONFIG_SSI_POLLWAIT=y -#CONFIG_SSI_TXLIMIT=4 - -# -# STM32F20xxx specific CAN device driver settings -# -# CONFIG_CAN - Enables CAN support (one or both of CONFIG_STM32_CAN1 or -# CONFIG_STM32_CAN2 must also be defined) -# CONFIG_CAN_EXTID - Enables support for the 29-bit extended ID. Default -# Standard 11-bit IDs. -# CONFIG_CAN_FIFOSIZE - The size of the circular buffer of CAN messages. -# Default: 8 -# CONFIG_CAN_NPENDINGRTR - The size of the list of pending RTR requests. -# Default: 4 -# CONFIG_CAN_LOOPBACK - A CAN driver may or may not support a loopback -# mode for testing. The STM32 CAN driver does support loopback mode. -# CONFIG_CAN1_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN1 is defined. -# CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined. -# CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6 -# CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7 -# -CONFIG_CAN=n -CONFIG_CAN_EXTID=n -#CONFIG_CAN_FIFOSIZE -#CONFIG_CAN_NPENDINGRTR -CONFIG_CAN_LOOPBACK=n -CONFIG_CAN1_BAUD=700000 -CONFIG_CAN2_BAUD=700000 - -# -# STM32F20xxx Ethernet device driver settings -# -# CONFIG_STM32_PHYADDR - The 5-bit address of the PHY on the board -# CONFIG_STM32_MII - Support Ethernet MII interface -# CONFIG_STM32_MII_MCO1 - Use MCO1 to clock the MII interface -# CONFIG_STM32_MII_MCO2 - Use MCO2 to clock the MII interface -# CONFIG_STM32_RMII - Support Ethernet RMII interface -# CONFIG_STM32_AUTONEG - Use PHY autonegotion to determine speed and mode -# CONFIG_STM32_ETHFD - If CONFIG_STM32_AUTONEG is not defined, then this -# may be defined to select full duplex mode. Default: half-duplex -# CONFIG_STM32_ETH100MBPS - If CONFIG_STM32_AUTONEG is not defined, then this -# may be defined to select 100 MBps speed. Default: 10 Mbps -# CONFIG_STM32_PHYSR - This must be provided if CONFIG_STM32_AUTONEG is -# defined. The PHY status register address may diff from PHY to PHY. This -# configuration sets the address of the PHY status register. -# CONFIG_STM32_PHYSR_SPEED - This must be provided if CONFIG_STM32_AUTONEG is -# defined. This provides bit mask indicating 10 or 100MBps speed. -# CONFIG_STM32_PHYSR_100MBPS - This must be provided if CONFIG_STM32_AUTONEG is -# defined. This provides the value of the speed bit(s) indicating 100MBps speed. -# CONFIG_STM32_PHYSR_MODE - This must be provided if CONFIG_STM32_AUTONEG is -# defined. This provide bit mask indicating full or half duplex modes. -# CONFIG_STM32_PHYSR_FULLDUPLEX - This must be provided if CONFIG_STM32_AUTONEG is -# defined. This provides the value of the mode bits indicating full duplex mode. -# CONFIG_STM32_ETH_PTP - Precision Time Protocol (PTP). Not supported -# but some hooks are indicated with this condition. -# CONFIG_STM32_ETHMAC_REGDEBUG - If CONFIG_DEBUG is also enabled, this will -# generate far more debug output than you could ever care to see unless you -# are debugging low-level Ethernet driver features. -# -CONFIG_STM32_PHYADDR=0x01 -CONFIG_STM32_MII=y -CONFIG_STM32_MII_MCO1=y -CONFIG_STM32_MII_MCO2=n -CONFIG_STM32_RMII=n -CONFIG_STM32_AUTONEG=y -#CONFIG_STM32_ETHFD -#CONFIG_STM32_ETH100MB -CONFIG_STM32_PHYSR=16 -CONFIG_STM32_PHYSR_SPEED=0x0002 -CONFIG_STM32_PHYSR_100MBPS=0x0000 -CONFIG_STM32_PHYSR_MODE=0x0004 -CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004 -CONFIG_STM32_ETH_PTP=n -CONFIG_STM32_ETHMAC_REGDEBUG=n - -# -# I2C configuration -# -CONFIG_I2C=y -CONFIG_I2C_POLLED=y -CONFIG_I2C_TRANSFER=y -CONFIG_I2C_TRACE=n - -# -# ADC configuration -# -# Enable ADC driver support. The STM3220G-EVAL has a 10 Kohm potentiometer -# RV1 connected to PF9 of STM32F207IGH6 on the board: TIM14_CH1/ SMC_CD/ADC3_IN7 -# In order to use the ADC, you must make the following selections: -# -# Above: -# CONFIG_STM32_ADC3=y : Enable ADC3 -# CONFIG_STM32_TIM1=y : Enable Timer 1 -# -# Below: -# CONFIG_ADC=y : Enable the generic ADC infrastructure -# CONFIG_STM32_TIM1_ADC=y : Indicate that timer 1 will be used to trigger an ADC -# CONFIG_STM32_TIM1_ADC3=y : Assign timer 1 to drive ADC3 sampling -# CONFIG_STM32_ADC3_SAMPLE_FREQUENCY=100 : Select a sampling frequency -# -CONFIG_ADC=n -#CONFIG_STM32_TIM1_ADC=y -CONFIG_STM32_TIM1_ADC3=y -CONFIG_STM32_ADC3_SAMPLE_FREQUENCY=100 - -# -# PWM configuration -# -# The STM3220G-Eval has no real on-board PWM devices, but the board can be configured to output -# a pulse train using several options (see board.h). Here the default setup is for TIM8, CH4. -# Don't forget to enable CONFIG_PWM and CONFIG_STM32_TIM8. -# -CONFIG_PWM=n -CONFIG_PWM_PULSECOUNT=y -CONFIG_STM32_TIM8_PWM=y -CONFIG_STM32_TIM8_CHANNEL=4 - -# -# General build options -# -# CONFIG_RRLOAD_BINARY - make the rrload binary format used with -# BSPs from www.ridgerun.com using the tools/mkimage.sh script -# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_RAW_BINARY - make a raw binary format file used with many -# different loaders using the GNU objcopy program. This option -# should not be selected if you are not using the GNU toolchain. -# CONFIG_HAVE_LIBM - toolchain supports libm.a -# -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=y -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=n -CONFIG_HAVE_LIBM=n - -# -# General OS setup -# -# CONFIG_APPS_DIR - Identifies the relative path to the directory -# that builds the application to link with NuttX. Default: ../apps -# CONFIG_DEBUG - enables built-in debug options -# CONFIG_DEBUG_VERBOSE - enables verbose debug output -# CONFIG_DEBUG_SYMBOLS - build without optimization and with -# debug symbols (needed for use with a debugger). -# CONFIG_HAVE_CXX - Enable support for C++ -# CONFIG_MM_REGIONS - If the architecture includes multiple -# regions of memory to allocate from, this specifies the -# number of memory regions that the memory manager must -# handle and enables the API mm_addregion(start, end); -# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot -# time console output -# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz -# or MSEC_PER_TICK=10. This setting may be defined to -# inform NuttX that the processor hardware is providing -# system timer interrupts at some interrupt interval other -# than 10 msec. -# CONFIG_RR_INTERVAL - The round robin timeslice will be set -# this number of milliseconds; Round robin scheduling can -# be disabled by setting this value to zero. -# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in -# scheduler to monitor system performance -# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a -# task name to save in the TCB. Useful if scheduler -# instrumentation is selected. Set to zero to disable. -# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - -# Used to initialize the internal time logic. -# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions. -# You would only need this if you are concerned about accurate -# time conversions in the past or in the distant future. -# CONFIG_JULIAN_TIME - Enables Julian time conversions. You -# would only need this if you are concerned about accurate -# time conversion in the distand past. You must also define -# CONFIG_GREGORIAN_TIME in order to use Julian time. -# CONFIG_DEV_CONSOLE - Set if architecture-specific logic -# provides /dev/console. Enables stdout, stderr, stdin. -# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console -# driver (minimul support) -# CONFIG_MUTEX_TYPES: Set to enable support for recursive and -# errorcheck mutexes. Enables pthread_mutexattr_settype(). -# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority -# inheritance on mutexes and semaphores. -# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority -# inheritance is enabled. It defines the maximum number of -# different threads (minus one) that can take counts on a -# semaphore with priority inheritance support. This may be -# set to zero if priority inheritance is disabled OR if you -# are only using semaphores as mutexes (only one holder) OR -# if no more than two threads participate using a counting -# semaphore. -# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, -# then this setting is the maximum number of higher priority -# threads (minus 1) than can be waiting for another thread -# to release a count on a semaphore. This value may be set -# to zero if no more than one thread is expected to wait for -# a semaphore. -# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors -# by task_create() when a new task is started. If set, all -# files/drivers will appear to be closed in the new task. -# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first -# three file descriptors (stdin, stdout, stderr) by task_create() -# when a new task is started. If set, all files/drivers will -# appear to be closed in the new task except for stdin, stdout, -# and stderr. -# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket -# desciptors by task_create() when a new task is started. If -# set, all sockets will appear to be closed in the new task. -# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to -# handle delayed processing from interrupt handlers. This feature -# is required for some drivers but, if there are not complaints, -# can be safely disabled. The worker thread also performs -# garbage collection -- completing any delayed memory deallocations -# from interrupt handlers. If the worker thread is disabled, -# then that clean will be performed by the IDLE thread instead -# (which runs at the lowest of priority and may not be appropriate -# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE -# is enabled, then the following options can also be used: -# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker -# thread. Default: 50 -# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for -# work in units of microseconds. Default: 50*1000 (50 MS). -# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker -# thread. Default: CONFIG_IDLETHREAD_STACKSIZE. -# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up -# the worker thread. Default: 4 -# CONFIG_SCHED_WAITPID - Enable the waitpid() API -# CONFIG_SCHED_ATEXIT - Enabled the atexit() API -# -#CONFIG_APPS_DIR= -CONFIG_DEBUG=y -CONFIG_DEBUG_VERBOSE=y -CONFIG_DEBUG_SYMBOLS=y -CONFIG_DEBUG_FS=n -CONFIG_DEBUG_GRAPHICS=n -CONFIG_DEBUG_LCD=n -CONFIG_DEBUG_USB=n -CONFIG_DEBUG_NET=n -CONFIG_DEBUG_RTC=n -CONFIG_DEBUG_ANALOG=n -CONFIG_DEBUG_PWM=n -CONFIG_DEBUG_CAN=n -CONFIG_DEBUG_I2C=n -CONFIG_HAVE_CXX=n -CONFIG_MM_REGIONS=1 -CONFIG_ARCH_LOWPUTC=y -CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n -CONFIG_TASK_NAME_SIZE=0 -CONFIG_START_YEAR=2011 -CONFIG_START_MONTH=12 -CONFIG_START_DAY=6 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n -CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=n -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n -CONFIG_SDCLONE_DISABLE=y -CONFIG_SCHED_WORKQUEUE=y -CONFIG_SCHED_WORKPRIORITY=192 -CONFIG_SCHED_WORKPERIOD=(50*1000) -CONFIG_SCHED_WORKSTACKSIZE=1024 -CONFIG_SIG_SIGWORK=4 -CONFIG_SCHED_WAITPID=y -CONFIG_SCHED_ATEXIT=n - -# -# System Logging -# -# CONFIG_SYSLOG - Enables the System Logging feature. -# CONFIG_RAMLOG - Enables the RAM logging feature -# CONFIG_RAMLOG_CONSOLE - Use the RAM logging device as a system console. -# If this feature is enabled (along with CONFIG_DEV_CONSOLE), then all -# console output will be re-directed to a circular buffer in RAM. This -# is useful, for example, if the only console is a Telnet console. Then -# in that case, console output from non-Telnet threads will go to the -# circular buffer and can be viewed using the NSH 'dmesg' command. -# CONFIG_RAMLOG_SYSLOG - Use the RAM logging device for the syslogging -# interface. If this feature is enabled (along with CONFIG_SYSLOG), -# then all debug output (only) will be re-directed to the circular -# buffer in RAM. This RAM log can be view from NSH using the 'dmesg' -# command. -# CONFIG_RAMLOG_NPOLLWAITERS - The number of threads than can be waiting -# for this driver on poll(). Default: 4 -# -# If CONFIG_RAMLOG_CONSOLE or CONFIG_RAMLOG_SYSLOG is selected, then the -# following may also be provided: -# -# CONFIG_RAMLOG_CONSOLE_BUFSIZE - Size of the console RAM log. Default: 1024 -# - -CONFIG_SYSLOG=y -CONFIG_RAMLOG=y -CONFIG_RAMLOG_CONSOLE=n -CONFIG_RAMLOG_SYSLOG=y -#CONFIG_RAMLOG_NPOLLWAITERS -#CONFIG_RAMLOG_CONSOLE_BUFSIZE - -# -# Settings for NXFLAT -# -# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. -# This format will support execution of NuttX binaries located -# in a ROMFS filesystem (see examples/nxflat). -# CONFIG_NXFLAT_DUMPBUFFER. Dump a most buffers that NXFFLAT deals -# with. CONFIG_DEBUG, CONFIG_DEBUG_VERBOSE, and -# CONFIG_DEBUG_BINFMT have to be defined or -# CONFIG_NXFLAT_DUMPBUFFER does nothing. -# CONFIG_SYMTAB_ORDEREDBYNAME. Select if the system symbol table -# is ordered by symbol name -# -CONFIG_NXFLAT=n -CONFIG_NXFLAT_DUMPBUFFER=n -CONFIG_SYMTAB_ORDEREDBYNAME=y - -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=n -CONFIG_DISABLE_ENVIRON=n -CONFIG_DISABLE_POLL=y - -# -# Misc libc settings -# -# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a -# little smaller if we do not support fieldwidthes -# -CONFIG_NOPRINTF_FIELDWIDTH=n - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve system performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n - -# -# Sizes of configurable things (0 disables) -# -# CONFIG_MAX_TASKS - The maximum number of simultaneously -# active tasks. This value must be a power of two. -# CONFIG_MAX_TASK_ARGS - This controls the maximum number of -# of parameters that a task may receive (i.e., maxmum value -# of 'argc') -# CONFIG_NPTHREAD_KEYS - The number of items of thread- -# specific data that can be retained -# CONFIG_NFILE_DESCRIPTORS - The maximum number of file -# descriptors (one for each open) -# CONFIG_NFILE_STREAMS - The maximum number of streams that -# can be fopen'ed -# CONFIG_NAME_MAX - The maximum size of a file name. -# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate -# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_STDIO_LINEBUFFER - If standard C buffered I/O is enabled -# (CONFIG_STDIO_BUFFER_SIZE > 0), then this option may be added -# to force automatic, line-oriented flushing the output buffer -# for putc(), fputc(), putchar(), puts(), fputs(), printf(), -# fprintf(), and vfprintf(). When a newline is encountered in -# the output string, the output buffer will be flushed. This -# (slightly) increases the NuttX footprint but supports the kind -# of behavior that people expect for printf(). -# CONFIG_NUNGET_CHARS - Number of characters that can be -# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message -# structures. The system manages a pool of preallocated -# message structures to minimize dynamic allocations -# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with -# a fixed payload size given by this settin (does not include -# other message structure overhead. -# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that -# can be passed to a watchdog handler -# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog -# structures. The system manages a pool of preallocated -# watchdog structures to minimize dynamic allocations -# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX -# timer structures. The system manages a pool of preallocated -# timer structures to minimize dynamic allocations. Set to -# zero for all dynamic allocations. -# -CONFIG_MAX_TASKS=16 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=4 -CONFIG_NFILE_DESCRIPTORS=8 -CONFIG_NFILE_STREAMS=8 -CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=256 -CONFIG_STDIO_LINEBUFFER=y -CONFIG_NUNGET_CHARS=2 -CONFIG_PREALLOC_MQ_MSGS=4 -CONFIG_MQ_MAXMSGSIZE=32 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=16 -CONFIG_PREALLOC_TIMERS=4 - -# -# Framebuffer driver options -# -CONFIG_FB_CMAP=n -CONFIG_FB_HWCURSOR=n -CONFIG_FB_HWCURSORIMAGE=n -#CONFIG_FB_HWCURSORSIZE -#CONFIG_FB_TRANSPARENCY - -# -# Filesystem configuration -# -# CONFIG_FS_FAT - Enable FAT filesystem support -# CONFIG_FAT_SECTORSIZE - Max supported sector size -# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3 -# file name support. -# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims -# patents on FAT long file name technology. Please read the -# disclaimer in the top-level COPYING file and only enable this -# feature if you understand these issues. -# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the -# default, maximum long file name is 255 bytes. This can eat up -# a lot of memory (especially stack space). If you are willing -# to live with some non-standard, short long file names, then -# define this value. A good choice would be the same value as -# selected for CONFIG_NAME_MAX which will limit the visibility -# of longer file names anyway. -# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support. -# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. -# This must have one of the values of 0xff or 0x00. -# Default: 0xff. -# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, -# don't both with file chunks smaller than this number of data bytes. -# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name. -# Default: 255. -# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, -# don't both with file chunks smaller than this number of data bytes. -# Default: 32. -# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean -# packing files together toward the end of the file or, if file are -# deleted at the end of the file, clean up can simply mean erasing -# the end of FLASH memory so that it can be re-used again. However, -# doing this can also harm the life of the FLASH part because it can -# mean that the tail end of the FLASH is re-used too often. This -# threshold determines if/when it is worth erased the tail end of FLASH -# and making it available for re-use (and possible over-wear). -# Default: 8192. -# CONFIG_FS_ROMFS - Enable ROMFS filesystem support -# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this -# option will enable a limited form of memory mapping that is -# implemented by copying whole files into memory. -# -CONFIG_FS_FAT=y -CONFIG_FAT_LCNAMES=y -CONFIG_FAT_LFN=y -CONFIG_FAT_MAXFNAME=32 -CONFIG_FS_NXFFS=n -CONFIG_FS_ROMFS=n - -# -# SPI-based MMC/SD driver -# -# CONFIG_MMCSD_NSLOTS -# Number of MMC/SD slots supported by the driver -# CONFIG_MMCSD_READONLY -# Provide read-only access (default is read/write) -# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card. -# Default is 20MHz. -# -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 - -# -# Block driver buffering -# -# CONFIG_FS_READAHEAD -# Enable read-ahead buffering -# CONFIG_FS_WRITEBUFFER -# Enable write buffering -# -CONFIG_FS_READAHEAD=n -CONFIG_FS_WRITEBUFFER=n - -# -# STM32 SDIO-based MMC/SD driver -# -# CONFIG_SDIO_DMA -# SDIO driver supports DMA -# CONFIG_SDIO_PRI - Select SDIO interrupt prority. Default: 128 -# CONFIG_SDIO_DMAPRIO - Select SDIO DMA interrupt priority. -# Default: Medium -# CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode. Default: -# 4-bit transfer mode. -# CONFIG_MMCSD_MMCSUPPORT -# Enable support for MMC cards -# CONFIG_MMCSD_HAVECARDDETECT -# SDIO driver card detection is 100% accurate -# -CONFIG_SDIO_DMA=n -#CONFIG_SDIO_PRI=128 -#CONFIG_SDIO_DMAPRIO -#CONFIG_SDIO_WIDTH_D1_ONLY -CONFIG_MMCSD_MMCSUPPORT=n -CONFIG_MMCSD_HAVECARDDETECT=n - -# -# SDIO-based MMC/SD driver -# -# CONFIG_SDIO_DMA -# SDIO driver supports DMA -# CONFIG_MMCSD_MMCSUPPORT -# Enable support for MMC cards -# CONFIG_MMCSD_HAVECARDDETECT -# SDIO driver card detection is 100% accurate -# -CONFIG_SDIO_DMA=n -CONFIG_MMCSD_MMCSUPPORT=n -CONFIG_MMCSD_HAVECARDDETECT=n - -# -# TCP/IP and UDP support via uIP -# -# CONFIG_NET - Enable or disable all network features -# CONFIG_NET_NOINTS - uIP not called from interrupt level. -# CONFIG_NET_MULTIBUFFER - Use multiple input/output buffers (probably no) -# CONFIG_NET_IPv6 - Build in support for IPv6 -# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread. -# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options -# CONFIG_NET_BUFSIZE - uIP buffer size -# CONFIG_NET_TCP - TCP support on or off -# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks) -# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers -# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero) -# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until -# accept() is called. The size of the backlog is selected when listen() is called. -# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks) -# CONFIG_NET_UDP - UDP support on or off -# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off -# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections -# CONFIG_NET_ICMP - ICMP ping response support on or off -# CONFIG_NET_ICMP_PING - ICMP ping request support on or off -# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address -# CONFIG_NET_STATISTICS - uIP statistics on or off -# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window -# CONFIG_NET_BROADCAST - Broadcast support -# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table -# CONFIG_NET_ARP_IPIN - Harvest IP/MAC address mappings from the ARP table -# from incoming IP packets. -# CONFIG_NET_MULTICAST - Outgoing multi-cast address support -# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when -# looking for duplicates -# -CONFIG_NET=y -CONFIG_NET_NOINTS=n -CONFIG_NET_MULTIBUFFER=y -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=10 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=562 -CONFIG_NET_TCP=y -CONFIG_NET_TCP_CONNS=40 -#CONFIG_NET_TCP_READAHEAD_BUFSIZE -CONFIG_NET_NTCP_READAHEAD_BUFFERS=16 -CONFIG_NET_TCPBACKLOG=y -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=y -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=y -CONFIG_NET_ICMP_PING=y -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -CONFIG_NET_BROADCAST=n -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_ARP_IPIN=n -CONFIG_NET_MULTICAST=n -#CONFIG_NET_FWCACHE_SIZE=2 - -# -# UIP Network Utilities -# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP -# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries -# -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 - -# -# FTP Server -# -# CONFIG_FTPD_VENDORID - The vendor name to use in FTP communications. -# Default: "NuttX" -# CONFIG_FTPD_SERVERID - The server name to use in FTP communications. -# Default: "NuttX FTP Server" -# CONFIG_FTPD_CMDBUFFERSIZE - The maximum size of one command. Default: -# 512 bytes. -# CONFIG_FTPD_DATABUFFERSIZE - The size of the I/O buffer for data -# transfers. Default: 2048 bytes. -# CONFIG_FTPD_WORKERSTACKSIZE - The stacksize to allocate for each -# FTP daemon worker thread. Default: 2048 bytes. -# -# Other required configuration settings: Of course TCP networking support -# is required. But here are a couple that are less obvious: -# -# CONFIG_DISABLE_PTHREAD - pthread support is required -# CONFIG_DISABLE_POLL - poll() support is required -# - -# -# RTC Configuration -# -# CONFIG_RTC - Enables general support for a hardware RTC. Specific -# architectures may require other specific settings. -# CONFIG_RTC_DATETIME - There are two general types of RTC: (1) A simple -# battery backed counter that keeps the time when power is down, and (2) -# A full date / time RTC the provides the date and time information, often -# in BCD format. If CONFIG_RTC_DATETIME is selected, it specifies this -# second kind of RTC. In this case, the RTC is used to "seed" the normal -# NuttX timer and the NuttX system timer provides for higher resoution -# time. -# CONFIG_RTC_HIRES - If CONFIG_RTC_DATETIME not selected, then the simple, -# battery backed counter is used. There are two different implementations -# of such simple counters based on the time resolution of the counter: -# The typical RTC keeps time to resolution of 1 second, usually -# supporting a 32-bit time_t value. In this case, the RTC is used to -# "seed" the normal NuttX timer and the NuttX timer provides for higher -# resoution time. If CONFIG_RTC_HIRES is enabled in the NuttX configuration, -# then the RTC provides higher resolution time and completely replaces the -# system timer for purpose of date and time. -# CONFIG_RTC_FREQUENCY - If CONFIG_RTC_HIRES is defined, then the frequency -# of the high resolution RTC must be provided. If CONFIG_RTC_HIRES is -# not defined, CONFIG_RTC_FREQUENCY is assumed to be one. -# CONFIG_RTC_ALARM - Enable if the RTC hardware supports setting of an -# alarm. A callback function will be executed when the alarm goes off -# -CONFIG_RTC=y -CONFIG_RTC_DATETIME=y -CONFIG_RTC_HIRES=n -CONFIG_RTC_FREQUENCY=n -CONFIG_RTC_ALARM=n - -# -# USB Device Configuration -# -# CONFIG_USBDEV -# Enables USB device support -# CONFIG_USBDEV_ISOCHRONOUS -# Build in extra support for isochronous endpoints -# CONFIG_USBDEV_DUALSPEED -# Hardware handles high and full speed operation (USB 2.0) -# CONFIG_USBDEV_SELFPOWERED -# Will cause USB features to indicate that the device is -# self-powered -# CONFIG_USBDEV_MAXPOWER -# Maximum power consumption in mA -# CONFIG_USBDEV_TRACE -# Enables USB tracing for debug -# CONFIG_USBDEV_TRACE_NRECORDS -# Number of trace entries to remember -# -CONFIG_USBDEV=n -CONFIG_USBDEV_ISOCHRONOUS=n -CONFIG_USBDEV_DUALSPEED=n -CONFIG_USBDEV_SELFPOWERED=y -CONFIG_USBDEV_REMOTEWAKEUP=n -CONFIG_USBDEV_MAXPOWER=100 -CONFIG_USBDEV_TRACE=n -CONFIG_USBDEV_TRACE_NRECORDS=128 - -# -# USB Serial Device Configuration -# -# CONFIG_PL2303 -# Enable compilation of the USB serial driver -# CONFIG_PL2303_EPINTIN -# The logical 7-bit address of a hardware endpoint that supports -# interrupt IN operation -# CONFIG_PL2303_EPBULKOUT -# The logical 7-bit address of a hardware endpoint that supports -# bulk OUT operation -# CONFIG_PL2303_EPBULKIN -# The logical 7-bit address of a hardware endpoint that supports -# bulk IN operation -# # CONFIG_PL2303_NWRREQS and CONFIG_PL2303_NRDREQS -# The number of write/read requests that can be in flight -# CONFIG_PL2303_VENDORID and CONFIG_PL2303_VENDORSTR -# The vendor ID code/string -# CONFIG_PL2303_PRODUCTID and CONFIG_PL2303_PRODUCTSTR -# The product ID code/string -# CONFIG_PL2303_RXBUFSIZE and CONFIG_PL2303_TXBUFSIZE -# Size of the serial receive/transmit buffers -# -CONFIG_PL2303=n -CONFIG_PL2303_EPINTIN=1 -CONFIG_PL2303_EPBULKOUT=2 -CONFIG_PL2303_EPBULKIN=3 -CONFIG_PL2303_NWRREQS=4 -CONFIG_PL2303_NRDREQS=4 -CONFIG_PL2303_VENDORID=0x067b -CONFIG_PL2303_PRODUCTID=0x2303 -CONFIG_PL2303_VENDORSTR="Nuttx" -CONFIG_PL2303_PRODUCTSTR="USBdev Serial" -CONFIG_PL2303_RXBUFSIZE=512 -CONFIG_PL2303_TXBUFSIZE=512 - -# -# USB Storage Device Configuration -# -# CONFIG_USBMSC -# Enable compilation of the USB storage driver -# CONFIG_USBMSC_EP0MAXPACKET -# Max packet size for endpoint 0 -# CONFIG_USBMSC_EPBULKOUT and CONFIG_USBMSC_EPBULKIN -# The logical 7-bit address of a hardware endpoints that support -# bulk OUT and IN operations -# CONFIG_USBMSC_NWRREQS and CONFIG_USBMSC_NRDREQS -# The number of write/read requests that can be in flight -# CONFIG_USBMSC_BULKINREQLEN and CONFIG_USBMSC_BULKOUTREQLEN -# The size of the buffer in each write/read request. This -# value needs to be at least as large as the endpoint -# maxpacket and ideally as large as a block device sector. -# CONFIG_USBMSC_VENDORID and CONFIG_USBMSC_VENDORSTR -# The vendor ID code/string -# CONFIG_USBMSC_PRODUCTID and CONFIG_USBMSC_PRODUCTSTR -# The product ID code/string -# CONFIG_USBMSC_REMOVABLE -# Select if the media is removable -# -CONFIG_USBMSC=n -CONFIG_USBMSC_EP0MAXPACKET=64 -CONFIG_USBMSC_EPBULKOUT=2 -CONFIG_USBMSC_EPBULKIN=5 -CONFIG_USBMSC_NRDREQS=2 -CONFIG_USBMSC_NWRREQS=2 -CONFIG_USBMSC_BULKINREQLEN=256 -CONFIG_USBMSC_BULKOUTREQLEN=256 -CONFIG_USBMSC_VENDORID=0x584e -CONFIG_USBMSC_VENDORSTR="NuttX" -CONFIG_USBMSC_PRODUCTID=0x5342 -CONFIG_USBMSC_PRODUCTSTR="USBdev Storage" -CONFIG_USBMSC_VERSIONNO=0x0399 -CONFIG_USBMSC_REMOVABLE=y - -# -# Graphics related configuration settings -# -# CONFIG_NX -# Enables overall support for graphics library and NX -# CONFIG_NX_MULTIUSER -# Configures NX in multi-user mode -# CONFIG_NX_NPLANES -# Some YUV color formats requires support for multiple planes, -# one for each color component. Unless you have such special -# hardware, this value should be undefined or set to 1 -# CONFIG_NX_DISABLE_1BPP, CONFIG_NX_DISABLE_2BPP, -# CONFIG_NX_DISABLE_4BPP, CONFIG_NX_DISABLE_8BPP, -# CONFIG_NX_DISABLE_16BPP, CONFIG_NX_DISABLE_24BPP, and -# CONFIG_NX_DISABLE_32BPP -# NX supports a variety of pixel depths. You can save some -# memory by disabling support for unused color depths. -# CONFIG_NX_PACKEDMSFIRST -# If a pixel depth of less than 8-bits is used, then NX needs -# to know if the pixels pack from the MS to LS or from LS to MS -# CONFIG_NX_LCDDRIVER -# By default, NX builds to use a framebuffer driver (see -# include/nuttx/fb.h). If this option is defined, NX will -# build to use an LCD driver (see include/nuttx/lcd/lcd.h). -# CONFIG_LCD_MAXPOWER - The full-on power setting for an LCD device. -# CONFIG_LCD_MAXCONTRAST - The maximum contrast value for an LCD device. -# CONFIG_NX_MOUSE -# Build in support for mouse input -# CONFIG_NX_KBD -# Build in support of keypad/keyboard input -# CONFIG_NXTK_BORDERWIDTH -# Specifies with with of the border (in pixels) used with -# framed windows. The default is 4. -# CONFIG_NXTK_BORDERCOLOR1 and CONFIG_NXTK_BORDERCOLOR2 -# Specify the colors of the border used with framed windows. -# CONFIG_NXTK_BORDERCOLOR2 is the shadow side color and so -# is normally darker. The default is medium and dark grey, -# respectively -# CONFIG_NXTK_AUTORAISE -# If set, a window will be raised to the top if the mouse position -# is over a visible portion of the window. Default: A mouse -# button must be clicked over a visible portion of the window. -# CONFIG_NXFONTS_CHARBITS -# The number of bits in the character set. Current options are -# only 7 and 8. The default is 7. -# CONFIG_NXFONT_SANS17X22 -# This option enables support for a tiny, 17x22 san serif font -# (font ID FONTID_SANS17X22 == 14). -# CONFIG_NXFONT_SANS20X26 -# This option enables support for a tiny, 20x26 san serif font -# (font ID FONTID_SANS20X26 == 15). -# CONFIG_NXFONT_SANS23X27 -# This option enables support for a tiny, 23x27 san serif font -# (font ID FONTID_SANS23X27 == 1). -# CONFIG_NXFONT_SANS22X29 -# This option enables support for a small, 22x29 san serif font -# (font ID FONTID_SANS22X29 == 2). -# CONFIG_NXFONT_SANS28X37 -# This option enables support for a medium, 28x37 san serif font -# (font ID FONTID_SANS28X37 == 3). -# CONFIG_NXFONT_SANS39X48 -# This option enables support for a large, 39x48 san serif font -# (font ID FONTID_SANS39X48 == 4). -# CONFIG_NXFONT_SANS17X23B -# This option enables support for a tiny, 17x23 san serif bold font -# (font ID FONTID_SANS17X23B == 16). -# CONFIG_NXFONT_SANS20X27B -# This option enables support for a tiny, 20x27 san serif bold font -# (font ID FONTID_SANS20X27B == 17). -# CONFIG_NXFONT_SANS22X29B -# This option enables support for a small, 22x29 san serif bold font -# (font ID FONTID_SANS22X29B == 5). -# CONFIG_NXFONT_SANS28X37B -# This option enables support for a medium, 28x37 san serif bold font -# (font ID FONTID_SANS28X37B == 6). -# CONFIG_NXFONT_SANS40X49B -# This option enables support for a large, 40x49 san serif bold font -# (font ID FONTID_SANS40X49B == 7). -# CONFIG_NXFONT_SERIF22X29 -# This option enables support for a small, 22x29 font (with serifs) -# (font ID FONTID_SERIF22X29 == 8). -# CONFIG_NXFONT_SERIF29X37 -# This option enables support for a medium, 29x37 font (with serifs) -# (font ID FONTID_SERIF29X37 == 9). -# CONFIG_NXFONT_SERIF38X48 -# This option enables support for a large, 38x48 font (with serifs) -# (font ID FONTID_SERIF38X48 == 10). -# CONFIG_NXFONT_SERIF22X28B -# This option enables support for a small, 27x38 bold font (with serifs) -# (font ID FONTID_SERIF22X28B == 11). -# CONFIG_NXFONT_SERIF27X38B -# This option enables support for a medium, 27x38 bold font (with serifs) -# (font ID FONTID_SERIF27X38B == 12). -# CONFIG_NXFONT_SERIF38X49B -# This option enables support for a large, 38x49 bold font (with serifs) -# (font ID FONTID_SERIF38X49B == 13). -# -# NX Multi-user only options: -# -# CONFIG_NX_BLOCKING -# Open the client message queues in blocking mode. In this case, -# nx_eventhandler() will not return until a message is received and processed. -# CONFIG_NX_MXSERVERMSGS and CONFIG_NX_MXCLIENTMSGS -# Specifies the maximum number of messages that can fit in -# the message queues. No additional resources are allocated, but -# this can be set to prevent flooding of the client or server with -# too many messages (CONFIG_PREALLOC_MQ_MSGS controls how many -# messages are pre-allocated). -# -CONFIG_NX=n -CONFIG_NX_MULTIUSER=n -CONFIG_NX_NPLANES=1 -CONFIG_NX_DISABLE_1BPP=y -CONFIG_NX_DISABLE_2BPP=y -CONFIG_NX_DISABLE_4BPP=y -CONFIG_NX_DISABLE_8BPP=y -CONFIG_NX_DISABLE_16BPP=n -CONFIG_NX_DISABLE_24BPP=y -CONFIG_NX_DISABLE_32BPP=y -CONFIG_NX_PACKEDMSFIRST=n -CONFIG_NX_LCDDRIVER=y -CONFIG_LCD_MAXPOWER=1 -CONFIG_LCD_MAXCONTRAST=1 -CONFIG_NX_MOUSE=y -CONFIG_NX_KBD=y -#CONFIG_NXTK_BORDERWIDTH=4 -CONFIG_NXTK_BORDERCOLOR1=0xd69a -CONFIG_NXTK_BORDERCOLOR2=0xad55 -CONFIG_NXTK_AUTORAISE=n -CONFIG_NXFONT_SANS17X22=y -CONFIG_NXFONT_SANS20X26=n -CONFIG_NXFONT_SANS22X29=n -CONFIG_NXFONT_SANS23X27=n -CONFIG_NXFONT_SANS28X37=n -CONFIG_NXFONT_SANS17X23B=n -CONFIG_NXFONT_SANS20X27B=y -CONFIG_NXFONT_SANS22X29B=y -CONFIG_NXFONT_SANS28X37B=n -CONFIG_NXFONT_SANS40X49B=n -CONFIG_NXFONT_SERIF22X29=n -CONFIG_NXFONT_SERIF29X37=n -CONFIG_NXFONT_SERIF38X48=n -CONFIG_NXFONT_SERIF22X28B=n -CONFIG_NXFONT_SERIF27X38B=n -CONFIG_NXFONT_SERIF38X49B=n -CONFIG_NXFONTS_CHARBITS=7 -CONFIG_NX_BLOCKING=y -CONFIG_NX_MXSERVERMSGS=32 -CONFIG_NX_MXCLIENTMSGS=16 - -# -# Settings for examples/uip -# -CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_EXAMPLE_UIP_DHCPC=n - -# -# Settings for examples/nettest -CONFIG_EXAMPLE_NETTEST_SERVER=n -CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLE_NETTEST_NOMAC=y -CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1) - -# -# Settings for examples/ostest -# -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 - -# -# Settings for apps/nshlib -# -# CONFIG_NSH_BUILTIN_APPS - Support external registered, -# "named" applications that can be executed from the NSH -# command line (see apps/README.txt for more information). -# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer -# CONFIG_NSH_STRERROR - Use strerror(errno) -# CONFIG_NSH_LINELEN - Maximum length of one command line -# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi -# CONFIG_NSH_DISABLESCRIPT - Disable scripting support -# CONFIG_NSH_DISABLEBG - Disable background commands -# CONFIG_NSH_ROMFSETC - Use startup script in /etc -# CONFIG_NSH_CONSOLE - Use serial console front end -# CONFIG_NSH_TELNET - Use telnetd console front end -# CONFIG_NSH_ARCHINIT - Platform provides architecture -# specific initialization (nsh_archinitialize()). -# -# If CONFIG_NSH_TELNET is selected: -# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size -# CONFIG_NSH_DHCPC - Obtain address using DHCP -# CONFIG_NSH_IPADDR - Provides static IP address -# CONFIG_NSH_DRIPADDR - Provides static router IP address -# CONFIG_NSH_NETMASK - Provides static network mask -# CONFIG_NSH_NOMAC - Use a bogus MAC address -# -# If CONFIG_NSH_ROMFSETC is selected: -# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint -# CONFIG_NSH_INITSCRIPT - Relative path to init script -# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor -# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size -# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor -# CONFIG_NSH_FATSECTSIZE - FAT FS sector size -# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors -# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint -# -CONFIG_NSH_BUILTIN_APPS=y -CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=y -CONFIG_NSH_ARCHINIT=y -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=y -CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_NSH_DRIPADDR=(192<<24|168<<16|13<<8|23) -CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT=/tmp - -# -# Architecture-specific NSH options -# -CONFIG_NSH_MMCSDSPIPORTNO=0 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 - -# -# I2C tool settings -# -# CONFIG_I2CTOOL_BUILTIN - Build the tools as an NSH built-in command -# CONFIG_I2CTOOL_MINBUS - Smallest bus index supported by the hardware (default 0). -# CONFIG_I2CTOOL_MAXBUS - Largest bus index supported by the hardware (default 3) -# CONFIG_I2CTOOL_MINADDR - Minium device address (default: 0x03) -# CONFIG_I2CTOOL_MAXADDR - Largest device address (default: 0x77) -# CONFIG_I2CTOOL_MAXREGADDR - Largest register address (default: 0xff) -# CONFIG_I2CTOOL_DEFFREQ - Default frequency (default: 1000000) -# -CONFIG_I2CTOOL_BUILTIN=y -CONFIG_I2CTOOL_MINBUS=1 -CONFIG_I2CTOOL_MAXBUS=3 -#CONFIG_I2CTOOL_MINADDR -#CONFIG_I2CTOOL_MAXADDR -#CONFIG_I2CTOOL_MAXREGADDR -CONFIG_I2CTOOL_DEFFREQ=100000 - -# -# Settings for examples/usbserial -# -# CONFIG_EXAMPLES_USBSERIAL_INONLY -# Only verify IN (device-to-host) data transfers. Default: both -# CONFIG_EXAMPLES_USBSERIAL_OUTONLY -# Only verify OUT (host-to-device) data transfers. Default: both -# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL -# Send only small, single packet messages. Default: Send large and small. -# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG -# Send only large, multi-packet messages. Default: Send large and small. -# -CONFIG_EXAMPLES_USBSERIAL_INONLY=n -CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n -CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n -CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n - -CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n -CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n -CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n -CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n - -# -# Settings for examples/adc -# -# CONFIG_ADC - Enabled ADC support -# CONFIG_NSH_BUILTIN_APPS - Build the ADC test as an NSH built-in function. -# Default: Built as a standalone problem -# -# CONFIG_EXAMPLES_ADC_DEVPATH - The path to the ADC device. Default: /dev/adc0 -# CONFIG_EXAMPLES_ADC_NSAMPLES - If CONFIG_NSH_BUILTIN_APPS -# is defined, then the number of samples is provided on the command line -# and this value is ignored. Otherwise, this number of samples is -# collected and the program terminates. Default: Samples are collected -# indefinitely. -# CONFIG_EXAMPLES_ADC_GROUPSIZE - The number of samples to read at once. -# Default: 4 - -# -# Settings for examples/can -# -# CONFIG_CAN - Enables CAN support. -# CONFIG_CAN_LOOPBACK - A CAN driver may or may not support a loopback -# mode for testing. The STM32 CAN driver does support loopback mode. -# CONFIG_NSH_BUILTIN_APPS - Build the CAN test as an NSH built-in function. -# Default: Built as a standalone problem -# -# CONFIG_EXAMPLES_CAN_DEVPATH - The path to the CAN device. Default: /dev/can0 -# CONFIG_EXAMPLES_CAN_NMSGS - If CONFIG_NSH_BUILTIN_APPS -# is defined, then the number of loops is provided on the command line -# and this value is ignored. Otherwise, this number of CAN message is -# collected and the program terminates. Default: If built as an NSH -# built-in, the default is 32. Otherwise messages are sent and received -# indefinitely. - -# -# Settings for examples/pwm -# -# CONFIG_PWM - Enables PWM support. -# CONFIG_NSH_BUILTIN_APPS - Build the PWM test as an NSH built-in function. -# Default: Not built! The example can only be used as an NSH built-in -# application -# -# CONFIG_EXAMPLES_PWM_DEVPATH - The path to the PWM device. Default: /dev/pwm0 -# CONFIG_EXAMPLES_PWM_FREQUENCY - The initial PWM frequency. Default: 100 Hz -# CONFIG_EXAMPLES_PWM_DUTYPCT - The initial PWM duty as a percentage. Default: 50% -# CONFIG_EXAMPLES_PWM_DURATION - The initial PWM pulse train duration in sectonds. -# as a percentage. Default: 5 seconds - -# -# Settings for examples/ftpd -# -# CONFIG_EXAMPLES_FTPD_PRIO - Priority of the FTP daemon. -# Default: SCHED_PRIORITY_DEFAULT -# CONFIG_EXAMPLES_FTPD_STACKSIZE - Stack size allocated for the -# FTP daemon. Default: 2048 -# CONFIG_EXAMPLES_FTPD_NONETINIT - Define to suppress configuration of the -# network by apps/examples/ftpd. You would need to suppress network -# configuration if the network is configuration prior to running the -# example. -# -# NSH always initializes the network so if CONFIG_NSH_BUILTIN_APPS is -# defined, so is CONFIG_EXAMPLES_FTPD_NONETINIT (se it does not explicitly -# need to be defined in that case): -# -# CONFIG_NSH_BUILTIN_APPS - Build the FTPD daemon example test as an -# NSH built-in function. By default the FTPD daemon will be built -# as a standalone application. -# -# If CONFIG_EXAMPLES_FTPD_NONETINIT is not defined, then the following may -# be specified to customized the network configuration: -# -# CONFIG_EXAMPLE_FTPD_NOMAC - If the hardware has no MAC address of its -# own, define this =y to provide a bogus address for testing. -# CONFIG_EXAMPLE_FTPD_IPADDR - The target IP address. Default 10.0.0.2 -# CONFIG_EXAMPLE_FTPD_DRIPADDR - The default router address. Default -# 10.0.0.1 -# CONFIG_EXAMPLE_FTPD_NETMASK - The network mask. Default: 255.255.255.0 - -# -# Stack and heap information -# -# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP -# operation from FLASH but must copy initialized .data sections to RAM. -# (should also be =n for the STM3220G-EVAL which always runs from flash) -# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH -# but copy themselves entirely into RAM for better performance. -# CONFIG_CUSTOM_STACK - The up_ implementation will handle -# all stack operations outside of the nuttx model. -# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) -# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. -# This is the thread that (1) performs the inital boot of the system up -# to the point where user_start() is spawned, and (2) there after is the -# IDLE thread that executes only when there is no other thread ready to -# run. -# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate -# for the main user thread that begins at the user_start() entry point. -# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size -# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size -# CONFIG_HEAP_BASE - The beginning of the heap -# CONFIG_HEAP_SIZE - The size of the heap -# -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_STACK_POINTER= -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 -CONFIG_HEAP_BASE= -CONFIG_HEAP_SIZE= diff --git a/nuttx/configs/stm3220g-eval/nsh2/ld.script b/nuttx/configs/stm3220g-eval/nsh2/ld.script index 23c3d87c5..f01dc2b83 100644 --- a/nuttx/configs/stm3220g-eval/nsh2/ld.script +++ b/nuttx/configs/stm3220g-eval/nsh2/ld.script @@ -33,7 +33,7 @@ * ****************************************************************************/ -/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and +/* The STM32F207IGH6U has 1024Kb of FLASH beginning at address 0x0800:0000 and * 192Kb of SRAM. SRAM is split up into three blocks: * * 1) 112Kb of SRAM beginning at address 0x2000:0000 @@ -72,6 +72,12 @@ SECTIONS _etext = ABSOLUTE(.); } > flash + .init_section : { + _sinit = ABSOLUTE(.); + *(.init_array .init_array.*) + _einit = ABSOLUTE(.); + } > flash + __exidx_start = ABSOLUTE(.); .ARM.exidx : { *(.ARM.exidx*) diff --git a/nuttx/configs/stm3220g-eval/nsh2/setenv.sh b/nuttx/configs/stm3220g-eval/nsh2/setenv.sh index 35fa56915..1dc69bf42 100755 --- a/nuttx/configs/stm3220g-eval/nsh2/setenv.sh +++ b/nuttx/configs/stm3220g-eval/nsh2/setenv.sh @@ -1,8 +1,8 @@ #!/bin/bash -# configs/stm3210e-eval/nsh2/setenv.sh +# configs/stm3220g-eval/nsh2/setenv.sh # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# Copyright (C) 2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions @@ -56,6 +56,13 @@ fi # toolchain under windows. You will also have to edit this if you install # the CodeSourcery toolchain in any other location #export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" +# These are the Cygwin paths to the locations where I installed the Atollic +# toolchain under windows. You will also have to edit this if you install +# the Atollic toolchain in any other location. /usr/bin is added before +# the Atollic bin path because there is are binaries named gcc.exe and g++.exe +# at those locations as well. +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin" +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin" # This the Cygwin path to the location where I build the buildroot # toolchain. |