diff options
Diffstat (limited to 'nuttx/configs/stm3220g-eval')
| -rw-r--r-- | nuttx/configs/stm3220g-eval/dhcpd/defconfig | 46 | ||||
| -rw-r--r-- | nuttx/configs/stm3220g-eval/nettest/defconfig | 46 | ||||
| -rw-r--r-- | nuttx/configs/stm3220g-eval/nsh/defconfig | 46 | ||||
| -rw-r--r-- | nuttx/configs/stm3220g-eval/nsh2/defconfig | 46 | ||||
| -rw-r--r-- | nuttx/configs/stm3220g-eval/ostest/defconfig | 46 | ||||
| -rw-r--r-- | nuttx/configs/stm3220g-eval/telnetd/defconfig | 46 |
6 files changed, 276 insertions, 0 deletions
diff --git a/nuttx/configs/stm3220g-eval/dhcpd/defconfig b/nuttx/configs/stm3220g-eval/dhcpd/defconfig index db436c236..a054711c6 100644 --- a/nuttx/configs/stm3220g-eval/dhcpd/defconfig +++ b/nuttx/configs/stm3220g-eval/dhcpd/defconfig @@ -949,6 +949,18 @@ CONFIG_USBMSC_VERSIONNO=0x0399 CONFIG_USBMSC_REMOVABLE=y # +# Watchdog timer configuration +# +# CONFIG_WATCHDOG - Enable overall watchdog timer driver support. +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +CONFIG_WATCHDOG=n + +# # Graphics related configuration settings # # CONFIG_NX @@ -1243,6 +1255,40 @@ CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n # +# Settings for examples/watchdog +# +# This test depends on these specific Watchdog/NSH configurations settings (your +# specific watchdog hardware settings might require additional settings). +# +# CONFIG_WATCHDOG- Enables watchdog timer support support. +# CONFIG_NSH_BUILTIN_APPS - Build the watchdog time test as an NSH +# built-in function. Default: Not built! The example can only be used +# as an NSH built-in application +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +# Specific configuration options for this example include: +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH - The path to the Watchdog device. +# Default: /dev/watchdog0 +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME - Time in milliseconds that the example +# will ping the watchdog before letting the watchdog expire. Default: 5000 +# milliseconds +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY - Time delay between pings in +# milliseconds. Default: 500 milliseconds. +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT - The watchdog timeout value in +# milliseconds before the watchdog timer expires. Default: 2000 +# milliseconds. +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT + +# # Stack and heap information # # CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP diff --git a/nuttx/configs/stm3220g-eval/nettest/defconfig b/nuttx/configs/stm3220g-eval/nettest/defconfig index e54c502cc..21d673ab7 100644 --- a/nuttx/configs/stm3220g-eval/nettest/defconfig +++ b/nuttx/configs/stm3220g-eval/nettest/defconfig @@ -949,6 +949,18 @@ CONFIG_USBMSC_VERSIONNO=0x0399 CONFIG_USBMSC_REMOVABLE=y # +# Watchdog timer configuration +# +# CONFIG_WATCHDOG - Enable overall watchdog timer driver support. +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +CONFIG_WATCHDOG=n + +# # Graphics related configuration settings # # CONFIG_NX @@ -1236,6 +1248,40 @@ CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n # +# Settings for examples/watchdog +# +# This test depends on these specific Watchdog/NSH configurations settings (your +# specific watchdog hardware settings might require additional settings). +# +# CONFIG_WATCHDOG- Enables watchdog timer support support. +# CONFIG_NSH_BUILTIN_APPS - Build the watchdog time test as an NSH +# built-in function. Default: Not built! The example can only be used +# as an NSH built-in application +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +# Specific configuration options for this example include: +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH - The path to the Watchdog device. +# Default: /dev/watchdog0 +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME - Time in milliseconds that the example +# will ping the watchdog before letting the watchdog expire. Default: 5000 +# milliseconds +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY - Time delay between pings in +# milliseconds. Default: 500 milliseconds. +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT - The watchdog timeout value in +# milliseconds before the watchdog timer expires. Default: 2000 +# milliseconds. +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT + +# # Stack and heap information # # CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP diff --git a/nuttx/configs/stm3220g-eval/nsh/defconfig b/nuttx/configs/stm3220g-eval/nsh/defconfig index 5d793f354..e21453321 100644 --- a/nuttx/configs/stm3220g-eval/nsh/defconfig +++ b/nuttx/configs/stm3220g-eval/nsh/defconfig @@ -1048,6 +1048,18 @@ CONFIG_USBMSC_VERSIONNO=0x0399 CONFIG_USBMSC_REMOVABLE=y # +# Watchdog timer configuration +# +# CONFIG_WATCHDOG - Enable overall watchdog timer driver support. +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +CONFIG_WATCHDOG=n + +# # Graphics related configuration settings # # CONFIG_NX @@ -1411,6 +1423,40 @@ CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n # CONFIG_EXAMPLE_FTPD_NETMASK - The network mask. Default: 255.255.255.0 # +# Settings for examples/watchdog +# +# This test depends on these specific Watchdog/NSH configurations settings (your +# specific watchdog hardware settings might require additional settings). +# +# CONFIG_WATCHDOG- Enables watchdog timer support support. +# CONFIG_NSH_BUILTIN_APPS - Build the watchdog time test as an NSH +# built-in function. Default: Not built! The example can only be used +# as an NSH built-in application +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +# Specific configuration options for this example include: +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH - The path to the Watchdog device. +# Default: /dev/watchdog0 +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME - Time in milliseconds that the example +# will ping the watchdog before letting the watchdog expire. Default: 5000 +# milliseconds +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY - Time delay between pings in +# milliseconds. Default: 500 milliseconds. +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT - The watchdog timeout value in +# milliseconds before the watchdog timer expires. Default: 2000 +# milliseconds. +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT + +# # Stack and heap information # # CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP diff --git a/nuttx/configs/stm3220g-eval/nsh2/defconfig b/nuttx/configs/stm3220g-eval/nsh2/defconfig index df5a0e8d1..10457b077 100644 --- a/nuttx/configs/stm3220g-eval/nsh2/defconfig +++ b/nuttx/configs/stm3220g-eval/nsh2/defconfig @@ -1049,6 +1049,18 @@ CONFIG_USBMSC_VERSIONNO=0x0399 CONFIG_USBMSC_REMOVABLE=y # +# Watchdog timer configuration +# +# CONFIG_WATCHDOG - Enable overall watchdog timer driver support. +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +CONFIG_WATCHDOG=n + +# # Graphics related configuration settings # # CONFIG_NX @@ -1412,6 +1424,40 @@ CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n # CONFIG_EXAMPLE_FTPD_NETMASK - The network mask. Default: 255.255.255.0 # +# Settings for examples/watchdog +# +# This test depends on these specific Watchdog/NSH configurations settings (your +# specific watchdog hardware settings might require additional settings). +# +# CONFIG_WATCHDOG- Enables watchdog timer support support. +# CONFIG_NSH_BUILTIN_APPS - Build the watchdog time test as an NSH +# built-in function. Default: Not built! The example can only be used +# as an NSH built-in application +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +# Specific configuration options for this example include: +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH - The path to the Watchdog device. +# Default: /dev/watchdog0 +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME - Time in milliseconds that the example +# will ping the watchdog before letting the watchdog expire. Default: 5000 +# milliseconds +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY - Time delay between pings in +# milliseconds. Default: 500 milliseconds. +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT - The watchdog timeout value in +# milliseconds before the watchdog timer expires. Default: 2000 +# milliseconds. +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT + +# # Stack and heap information # # CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP diff --git a/nuttx/configs/stm3220g-eval/ostest/defconfig b/nuttx/configs/stm3220g-eval/ostest/defconfig index 9859b0f9c..ba86a5488 100644 --- a/nuttx/configs/stm3220g-eval/ostest/defconfig +++ b/nuttx/configs/stm3220g-eval/ostest/defconfig @@ -935,6 +935,18 @@ CONFIG_USBMSC_VERSIONNO=0x0399 CONFIG_USBMSC_REMOVABLE=y # +# Watchdog timer configuration +# +# CONFIG_WATCHDOG - Enable overall watchdog timer driver support. +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +CONFIG_WATCHDOG=n + +# # Graphics related configuration settings # # CONFIG_NX @@ -1513,6 +1525,40 @@ CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER=n CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS=n # +# Settings for examples/watchdog +# +# This test depends on these specific Watchdog/NSH configurations settings (your +# specific watchdog hardware settings might require additional settings). +# +# CONFIG_WATCHDOG- Enables watchdog timer support support. +# CONFIG_NSH_BUILTIN_APPS - Build the watchdog time test as an NSH +# built-in function. Default: Not built! The example can only be used +# as an NSH built-in application +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +# Specific configuration options for this example include: +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH - The path to the Watchdog device. +# Default: /dev/watchdog0 +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME - Time in milliseconds that the example +# will ping the watchdog before letting the watchdog expire. Default: 5000 +# milliseconds +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY - Time delay between pings in +# milliseconds. Default: 500 milliseconds. +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT - The watchdog timeout value in +# milliseconds before the watchdog timer expires. Default: 2000 +# milliseconds. +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT + +# # Stack and heap information # # CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP diff --git a/nuttx/configs/stm3220g-eval/telnetd/defconfig b/nuttx/configs/stm3220g-eval/telnetd/defconfig index 12e036d9f..5490234ec 100644 --- a/nuttx/configs/stm3220g-eval/telnetd/defconfig +++ b/nuttx/configs/stm3220g-eval/telnetd/defconfig @@ -948,6 +948,18 @@ CONFIG_USBMSC_VERSIONNO=0x0399 CONFIG_USBMSC_REMOVABLE=y # +# Watchdog timer configuration +# +# CONFIG_WATCHDOG - Enable overall watchdog timer driver support. +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +CONFIG_WATCHDOG=n + +# # Graphics related configuration settings # # CONFIG_NX @@ -1262,6 +1274,40 @@ CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n # +# Settings for examples/watchdog +# +# This test depends on these specific Watchdog/NSH configurations settings (your +# specific watchdog hardware settings might require additional settings). +# +# CONFIG_WATCHDOG- Enables watchdog timer support support. +# CONFIG_NSH_BUILTIN_APPS - Build the watchdog time test as an NSH +# built-in function. Default: Not built! The example can only be used +# as an NSH built-in application +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +# Specific configuration options for this example include: +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH - The path to the Watchdog device. +# Default: /dev/watchdog0 +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME - Time in milliseconds that the example +# will ping the watchdog before letting the watchdog expire. Default: 5000 +# milliseconds +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY - Time delay between pings in +# milliseconds. Default: 500 milliseconds. +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT - The watchdog timeout value in +# milliseconds before the watchdog timer expires. Default: 2000 +# milliseconds. +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT + +# # Stack and heap information # # CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP |