diff options
Diffstat (limited to 'nuttx/configs/stm3240g-eval/nsh/defconfig')
| -rw-r--r-- | nuttx/configs/stm3240g-eval/nsh/defconfig | 310 |
1 files changed, 310 insertions, 0 deletions
diff --git a/nuttx/configs/stm3240g-eval/nsh/defconfig b/nuttx/configs/stm3240g-eval/nsh/defconfig index 66bf40077..3e6e768e5 100644 --- a/nuttx/configs/stm3240g-eval/nsh/defconfig +++ b/nuttx/configs/stm3240g-eval/nsh/defconfig @@ -527,6 +527,7 @@ CONFIG_DEBUG_ANALOG=n CONFIG_DEBUG_PWM=n CONFIG_DEBUG_CAN=n CONFIG_DEBUG_I2C=n + CONFIG_HAVE_CXX=y CONFIG_HAVE_CXXINITIALIZE=y CONFIG_MM_REGIONS=2 @@ -1198,6 +1199,67 @@ CONFIG_NX_MXSERVERMSGS=32 CONFIG_NX_MXCLIENTMSGS=16 # +# NxConsole Configuration Settings: +# +# CONFIG_NXCONSOLE +# Enables building of the NxConsole driver. +# CONFIG_NXCONSOLE_BPP +# Currently, NxConsole supports only a single pixel depth. This +# configuration setting must be provided to support that single pixel depth. +# Default: The smallest enabled pixel depth. (see CONFIG_NX_DISABLE_*BPP) +# CONFIG_NXCONSOLE_NOGETRUN +# NxConsole needs to know if it can read from the LCD or not. If reading +# from the LCD is supported, then NxConsole can do more efficient +# scrolling. Default: Supported +# CONFIG_NXCONSOLE_MXCHARS +# NxConsole needs to remember every character written to the console so +# that it can redraw the window. This setting determines the size of some +# internal memory allocations used to hold the character data. Default: 128. +# CONFIG_NXCONSOLE_CACHESIZE +# NxConsole supports caching of rendered fonts. This font caching is required +# for two reasons: (1) First, it improves text performance, but more +# importantly (2) it preserves the font memory. Since the NX server runs on +# a separate server thread, it requires that the rendered font memory persist +# until the server has a chance to render the font. (NOTE: There is still +# inherently a race condition in this!). Unfortunately, the font cache would +# be quite large if all fonts were saved. The CONFIG_NXCONSOLE_CACHESIZE setting +# will control the size of the font cache (in number of glyphs). Only that +# number of the most recently used glyphs will be retained. Default: 16. +# CONFIG_NXCONSOLE_LINESEPARATION +# This the space (in rows) between each row of test. Default: 2 +# CONFIG_NXCONSOLE_NOWRAP +# By default, lines will wrap when the test reaches the right hand side +# of the window. This setting can be defining to change this behavior so +# that the text is simply truncated until a new line is encountered. +# +CONFIG_NXCONSOLE=n +CONFIG_NXCONSOLE_BPP=16 +CONFIG_NXCONSOLE_NOGETRUN=y +CONFIG_NXCONSOLE_MXCHARS=256 +CONFIG_NXCONSOLE_CACHESIZE=32 +# CONFIG_NXCONSOLE_LINESEPARATION +# CONFIG_NXCONSOLE_NOWRAP + +# +# STM3240G-EVAL LCD Hardware Configuration +# +# CONFIG_LCD_LANDSCAPE - Define for 320x240 display "landscape" +# support. Default is this 320x240 "landscape" orientation +# (this setting is informative only... not used). +# CONFIG_LCD_PORTRAIT - Define for 240x320 display "portrait" +# orientation support. In this orientation, the STM3240G-EVAL's +# LCD ribbon cable is at the bottom of the display. Default is +# 320x240 "landscape" orientation. +# CONFIG_LCD_RPORTRAIT - Define for 240x320 display "reverse +# portrait" orientation support. In this orientation, the +# STM3240G-EVAL's LCD ribbon cable is at the top of the display. +# Default is 320x240 "landscape" orientation. +# +CONFIG_LCD_LANDSCAPE=n +CONFIG_LCD_PORTRAIT=n +CONFIG_LCD_RPORTRAIT=y + +# # Settings for examples/uip # CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) @@ -1367,6 +1429,254 @@ CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n # indefinitely. # +# Settings for examples/nx +# +# CONFIG_EXAMPLES_NX_BUILTIN -- Build the NX example as a "built-in" +# that can be executed from the NSH command line +# CONFIG_EXAMPLES_NX_VPLANE -- The plane to select from the frame- +# buffer driver for use in the test. Default: 0 +# CONFIG_EXAMPLES_NX_DEVNO - The LCD device to select from the LCD +# driver for use in the test: Default: 0 +# CONFIG_EXAMPLES_NX_BGCOLOR -- The color of the background. Default depends on +# CONFIG_EXAMPLES_NX_BPP. +# CONFIG_EXAMPLES_NX_COLOR1 -- The color of window 1. Default depends on +# CONFIG_EXAMPLES_NX_BPP. +# CONFIG_EXAMPLES_NX_COLOR2 -- The color of window 2. Default depends on +# CONFIG_EXAMPLES_NX_BPP. +# CONFIG_EXAMPLES_NX_TBCOLOR -- The color of the toolbar. Default depends on +# CONFIG_EXAMPLES_NX_BPP. +# CONFIG_EXAMPLES_NX_FONTID - Selects the font (see font ID numbers in +# include/nuttx/nx/nxfonts.h) +# CONFIG_EXAMPLES_NX_FONTCOLOR -- The color of the toolbar. Default depends on +# CONFIG_EXAMPLES_NX_BPP. +# CONFIG_EXAMPLES_NX_BPP -- Pixels per pixel to use. Valid options +# include 2, 4, 8, 16, 24, and 32. Default is 32. +# CONFIG_EXAMPLES_NX_RAWWINDOWS -- Use raw windows; Default is to +# use pretty, framed NXTK windows with toolbars. +# CONFIG_EXAMPLES_NX_STACKSIZE -- The stacksize to use when creating +# the NX server. Default 2048 +# CONFIG_EXAMPLES_NX_CLIENTPRIO -- The client priority. Default: 80 +# CONFIG_EXAMPLES_NX_SERVERPRIO -- The server priority. Default: 120 +# CONFIG_EXAMPLES_NX_NOTIFYSIGNO -- The signal number to use with +# nx_eventnotify(). Default: 4 +# +CONFIG_EXAMPLES_NX_BUILTIN=y +CONFIG_EXAMPLES_NX_VPLANE=0 +CONFIG_EXAMPLES_NX_DEVNO=0 +CONFIG_EXAMPLES_NX_BGCOLOR=0x0011 +CONFIG_EXAMPLES_NX_COLOR1=0xaedc +CONFIG_EXAMPLES_NX_COLOR2=0xe7ff +CONFIG_EXAMPLES_NX_TBCOLOR=0xd69a +CONFIG_EXAMPLES_NX_FONTID=0 +CONFIG_EXAMPLES_NX_FONTCOLOR=0x0000 +CONFIG_EXAMPLES_NX_BPP=16 +CONFIG_EXAMPLES_NX_RAWWINDOWS=n +CONFIG_EXAMPLES_NX_STACKSIZE=2048 +CONFIG_EXAMPLES_NX_CLIENTPRIO=80 +CONFIG_EXAMPLES_NX_SERVERPRIO=120 +CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4 +CONFIG_EXAMPLES_NX_EXTERNINIT=n + +# +# Settings for examples/nxhello +# +# CONFIG_EXAMPLES_NXHELLO_BUILTIN -- Build the NXHELLO example as a "built-in" +# that can be executed from the NSH command line +# CONFIG_EXAMPLES_NXHELLO_VPLANE -- The plane to select from the frame- +# buffer driver for use in the test. Default: 0 +# CONFIG_EXAMPLES_NXHELLO_DEVNO - The LCD device to select from the LCD +# driver for use in the test: Default: 0 +# CONFIG_EXAMPLES_NXHELLO_BGCOLOR -- The color of the background. Default +# depends on CONFIG_EXAMPLES_NXHELLO_BPP. +# CONFIG_EXAMPLES_NXHELLO_FONTID - Selects the font (see font ID numbers in +# include/nuttx/nx/nxfonts.h) +# CONFIG_EXAMPLES_NXHELLO_FONTCOLOR -- The color of the fonts used in the +# background window. Default depends on CONFIG_EXAMPLES_NXHELLO_BPP. +# CONFIG_EXAMPLES_NXHELLO_BPP -- Pixels per pixel to use. Valid options +# include 2, 4, 8, 16, 24, and 32. Default is 32. +# CONFIG_EXAMPLES_NXHELLO_EXTERNINIT - The driver for the graphics device on +# this platform requires some unusual initialization. This is the +# for, for example, SPI LCD/OLED devices. If this configuration is +# selected, then the platform code must provide an LCD initialization +# function. +# +CONFIG_EXAMPLES_NXHELLO_BUILTIN=y +CONFIG_EXAMPLES_NXHELLO_VPLANE=0 +CONFIG_EXAMPLES_NXHELLO_DEVNO=0 +CONFIG_EXAMPLES_NXHELLO_BGCOLOR=0x0011 +CONFIG_EXAMPLES_NXHELLO_FONTID=6 +CONFIG_EXAMPLES_NXHELLO_FONTCOLOR=0xffdf +CONFIG_EXAMPLES_NXHELLO_BPP=16 +CONFIG_EXAMPLES_NXHELLO_EXTERNINIT=n + +# +# Settings for examples/nximage +# +# CONFIG_EXAMPLES_NXIMAGE_BUILTIN -- Build the NXIMAGE example as a "built-in" +# that can be executed from the NSH command line +# CONFIG_EXAMPLES_NXIMAGE_VPLANE -- The plane to select from the frame- +# buffer driver for use in the test. Default: 0 +# CONFIG_EXAMPLES_NXIMAGE_DEVNO - The LCD device to select from the LCD +# driver for use in the test: Default: 0 +# CONFIG_EXAMPLES_NXIMAGE_BPP -- Pixels per pixel to use. Valid options +# include 8, 16, and 24. Default is 16. +# CONFIG_EXAMPLES_NXIMAGE_XSCALEp5, CONFIG_EXAMPLES_NXIMAGE_XSCALE1p5, +# CONFIG_EXAMPLES_NXIMAGE_XSCALE2p0 -- The logo image width is 160 columns. +# One of these may be defined to rescale the image horizontally by .5, 1.5, +# or 2.0. +# CONFIG_EXAMPLES_NXIMAGE_YSCALEp5, CONFIG_EXAMPLES_NXIMAGE_YSCALE1p5, +# CONFIG_EXAMPLES_NXIMAGE_YSCALE2p0 -- The logo image height is 160 rows. +# One of these may be defined to rescale the image vertically by .5, 1.5, +# or 2.0. +# CONFIG_EXAMPLES_NXIMAGE_EXTERNINIT - The driver for the graphics device on +# this platform requires some unusual initialization. This is the +# for, for example, SPI LCD/OLED devices. If this configuration is +# selected, then the platform code must provide an LCD initialization +# function. +# +CONFIG_EXAMPLES_NXIMAGE_BUILTIN=y +CONFIG_EXAMPLES_NXIMAGE_VPLANE=0 +CONFIG_EXAMPLES_NXIMAGE_DEVNO=0 +CONFIG_EXAMPLES_NXIMAGE_BPP=16 +CONFIG_EXAMPLES_NXIMAGE_XSCALEp5=n +CONFIG_EXAMPLES_NXIMAGE_XSCALE1p5=y +CONFIG_EXAMPLES_NXIMAGE_XSCALE2p0=n +CONFIG_EXAMPLES_NXIMAGE_YSCALEp5=n +CONFIG_EXAMPLES_NXIMAGE_YSCALE1p5=y +CONFIG_EXAMPLES_NXIMAGE_YSCALE2p0=n +CONFIG_EXAMPLES_NXIMAGE_EXTERNINIT=n + +# +# Settings for examples/nxlines +# +# CONFIG_EXAMPLES_NXLINES_BUILTIN -- Build the NXLINES example as a "built-in" +# that can be executed from the NSH command line +# CONFIG_EXAMPLES_NXLINES_VPLANE -- The plane to select from the frame- +# buffer driver for use in the test. Default: 0 +# CONFIG_EXAMPLES_NXLINES_DEVNO - The LCD device to select from the LCD +# driver for use in the test: Default: 0 +# CONFIG_EXAMPLES_NXLINES_BGCOLOR -- The color of the background. Default +# depends on CONFIG_EXAMPLES_NXLINES_BPP. +# CONFIG_EXAMPLES_NXLINES_LINEWIDTH - Selects the width of the lines in +# pixels (default: 16) +# CONFIG_EXAMPLES_NXLINES_LINECOLOR -- The color of the central lines drawn +# in the background window. Default depends on CONFIG_EXAMPLES_NXLINES_BPP +# (there really is no meaningful default). +# CONFIG_EXAMPLES_NXLINES_BORDERWIDTH -- The width of the circular border +# drawn in the background window. (default: 4). +# CONFIG_EXAMPLES_NXLINES_BORDERCOLOR -- The color of the circular border +# drawn in the background window. Default depends on CONFIG_EXAMPLES_NXLINES_BPP +# (there really is no meaningful default). +# CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR -- The color of the circular region +# filled in the background window. Default depends on CONFIG_EXAMPLES_NXLINES_BPP +# (there really is no meaningful default). +# CONFIG_EXAMPLES_NXLINES_BPP -- Pixels per pixel to use. Valid options +# include 2, 4, 8, 16, 24, and 32. Default is 16. +# CONFIG_EXAMPLES_NXLINES_EXTERNINIT - The driver for the graphics device on +# this platform requires some unusual initialization. This is the +# for, for example, SPI LCD/OLED devices. If this configuration is +# selected, then the platform code must provide an LCD initialization +# function. +# +CONFIG_EXAMPLES_NXLINES_BUILTIN=n +CONFIG_EXAMPLES_NXLINES_VPLANE=0 +CONFIG_EXAMPLES_NXLINES_DEVNO=0 +CONFIG_EXAMPLES_NXLINES_BGCOLOR=0x0320 +CONFIG_EXAMPLES_NXLINES_LINEWIDTH=16 +CONFIG_EXAMPLES_NXLINES_LINECOLOR=0xffe0 +CONFIG_EXAMPLES_NXLINES_BORDERWIDTH=4 +CONFIG_EXAMPLES_NXLINES_BORDERCOLOR=0xffe0 +CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR=0xf7bb +CONFIG_EXAMPLES_NXLINES_BPP=16 +CONFIG_EXAMPLES_NXLINES_EXTERNINIT=n + +# +# Settings for examples/usbstorage +# +# CONFIG_EXAMPLES_USBMSC_BUILTIN +# This example can be built as two NSH "built-in" commands if this option +# is selection: 'msconn' will connect the USB mass storage device; 'msdis' +# will disconnect the USB storage device. +# CONFIG_EXAMPLES_USBMSC_NLUNS +# Defines the number of logical units (LUNs) exported by the USB storage +# driver. Each LUN corresponds to one exported block driver (or partition +# of a block driver). May be 1, 2, or 3. Default is 1. +# CONFIG_EXAMPLES_USBMSC_DEVMINOR1 +# The minor device number of the block driver for the first LUN. For +# example, N in /dev/mmcsdN. Used for registering the block driver. Default +# is zero. +# CONFIG_EXAMPLES_USBMSC_DEVPATH1 +# The full path to the registered block driver. Default is "/dev/mmcsd0" +# CONFIG_EXAMPLES_USBMSC_DEVMINOR2 and CONFIG_EXAMPLES_USBMSC_DEVPATH2 +# Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBMSC_NLUNS +# is 2 or 3. No defaults. +# CONFIG_EXAMPLES_USBMSC_DEVMINOR3 and CONFIG_EXAMPLES_USBMSC_DEVPATH3 +# Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBMSC_NLUNS +# is 3. No defaults. +# CONFIG_EXAMPLES_USBMSC_DEBUGMM +# Enables some debug tests to check for memory usage and memory leaks. +# +# If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB), then +# the example code will also manage the USB trace output. The amount of trace output +# can be controlled using: +# +# CONFIG_EXAMPLES_USBMSC_TRACEINIT +# Show initialization events +# CONFIG_EXAMPLES_USBMSC_TRACECLASS +# Show class driver events +# CONFIG_EXAMPLES_USBMSC_TRACETRANSFERS +# Show data transfer events +# CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER +# Show controller events +# CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS +# Show interrupt-related events. +# +CONFIG_EXAMPLES_USBMSC_BUILTIN=y +CONFIG_EXAMPLES_USBMSC_NLUNS=1 +CONFIG_EXAMPLES_USBMSC_DEVMINOR1=0 +CONFIG_EXAMPLES_USBMSC_DEVPATH1="/dev/mmcsd0" +CONFIG_EXAMPLES_USBMSC_DEBUGMM=n +CONFIG_EXAMPLES_USBMSC_TRACEINIT=n +CONFIG_EXAMPLES_USBMSC_TRACECLASS=n +CONFIG_EXAMPLES_USBMSC_TRACETRANSFERS=n +CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER=n +CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS=n + +# +# Settings for examples/watchdog +# +# This test depends on these specific Watchdog/NSH configurations settings (your +# specific watchdog hardware settings might require additional settings). +# +# CONFIG_WATCHDOG- Enables watchdog timer support support. +# CONFIG_NSH_BUILTIN_APPS - Build the watchdog time test as an NSH +# built-in function. Default: Not built! The example can only be used +# as an NSH built-in application +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +# Specific configuration options for this example include: +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH - The path to the Watchdog device. +# Default: /dev/watchdog0 +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME - Time in milliseconds that the example +# will ping the watchdog before letting the watchdog expire. Default: 5000 +# milliseconds +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY - Time delay between pings in +# milliseconds. Default: 500 milliseconds. +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT - The watchdog timeout value in +# milliseconds before the watchdog timer expires. Default: 2000 +# milliseconds. +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT + +# # Settings for examples/pwm # # CONFIG_PWM - Enables PWM support. |