diff options
Diffstat (limited to 'nuttx/configs/stm3240g-eval/ostest/defconfig')
-rwxr-xr-x | nuttx/configs/stm3240g-eval/ostest/defconfig | 34 |
1 files changed, 34 insertions, 0 deletions
diff --git a/nuttx/configs/stm3240g-eval/ostest/defconfig b/nuttx/configs/stm3240g-eval/ostest/defconfig index f45820bf9..8acda4c6b 100755 --- a/nuttx/configs/stm3240g-eval/ostest/defconfig +++ b/nuttx/configs/stm3240g-eval/ostest/defconfig @@ -161,6 +161,7 @@ CONFIG_STM32_I2C3=n CONFIG_STM32_CAN1=n CONFIG_STM32_CAN2=n CONFIG_STM32_DAC=n +CONFIG_STM32_PWR=n # APB2: CONFIG_STM32_TIM1=n CONFIG_STM32_TIM8=n @@ -715,6 +716,39 @@ CONFIG_NET_DHCP_LIGHT=n CONFIG_NET_RESOLV_ENTRIES=4 # +# RTC Configuration +# +# CONFIG_RTC - Enables general support for a hardware RTC. Specific +# architectures may require other specific settings. +# CONFIG_RTC_DATETIME - There are two general types of RTC: (1) A simple +# battery backed counter that keeps the time when power is down, and (2) +# A full date / time RTC the provides the date and time information, often +# in BCD format. If CONFIG_RTC_DATETIME is selected, it specifies this +# second kind of RTC. In this case, the RTC is used to "seed" the normal +# NuttX timer and the NuttX system timer provides for higher resoution +# time. +# CONFIG_RTC_HIRES - If CONFIG_RTC_DATETIME not selected, then the simple, +# battery backed counter is used. There are two different implementations +# of such simple counters based on the time resolution of the counter: +# The typical RTC keeps time to resolution of 1 second, usually +# supporting a 32-bit time_t value. In this case, the RTC is used to +# "seed" the normal NuttX timer and the NuttX timer provides for higher +# resoution time. If CONFIG_RTC_HIRES is enabled in the NuttX configuration, +# then the RTC provides higher resolution time and completely replaces the +# system timer for purpose of date and time. +# CONFIG_RTC_FREQUENCY - If CONFIG_RTC_HIRES is defined, then the frequency +# of the high resolution RTC must be provided. If CONFIG_RTC_HIRES is +# not defined, CONFIG_RTC_FREQUENCY is assumed to be one. +# CONFIG_RTC_ALARM - Enable if the RTC hardware supports setting of an +# alarm. A callback function will be executed when the alarm goes off +# +CONFIG_RTC=n +CONFIG_RTC_DATETIME=y +CONFIG_RTC_HIRES=n +CONFIG_RTC_FREQUENCY=n +CONFIG_RTC_ALARM=n + +# # USB Device Configuration # # CONFIG_USBDEV |