diff options
Diffstat (limited to 'nuttx/configs/stm32vldiscovery/README.txt')
-rw-r--r-- | nuttx/configs/stm32vldiscovery/README.txt | 495 |
1 files changed, 495 insertions, 0 deletions
diff --git a/nuttx/configs/stm32vldiscovery/README.txt b/nuttx/configs/stm32vldiscovery/README.txt new file mode 100644 index 000000000..0d1f23326 --- /dev/null +++ b/nuttx/configs/stm32vldiscovery/README.txt @@ -0,0 +1,495 @@ +README +====== + +This README discusses issues unique to NuttX configurations for the STMicro +STM32VLDiscovery (Value Line Discovery) board. + +Contents +======== + + - Development Environment + - GNU Toolchain Options + - IDEs + - NuttX EABI "buildroot" Toolchain + - NuttX OABI "buildroot" Toolchain + - NXFLAT Toolchain + - LEDs + - UARTs + - "STMicro STM32F100RC generic" specific Configuration Options + - Configurations + +Development Environment +======================= + + Either Linux or Cygwin on Windows can be used for the development environment. + The source has been built only using the GNU toolchain (see below). Other + toolchains will likely cause problems. + +GNU Toolchain Options +===================== + + Toolchain Configurations + ------------------------ + The NuttX make system has been modified to support the following different + toolchain options. + + 1. The CodeSourcery GNU toolchain, + 2. The Atollic Toolchain, + 3. The devkitARM GNU toolchain, + 4. Raisonance GNU toolchain, or + 5. The NuttX buildroot Toolchain (see below). + + All testing has been conducted using the CodeSourcery toolchain for Windows. To use + the Atollic, devkitARM, Raisonance GNU, or NuttX buildroot toolchain, you simply need to + add one of the following configuration options to your .config (or defconfig) + file: + + CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows + CONFIG_STM32_CODESOURCERYL=y : CodeSourcery under Linux + CONFIG_STM32_ATOLLIC_LITE=y : The free, "Lite" version of Atollic toolchain under Windows + CONFIG_STM32_ATOLLIC_PRO=y : The paid, "Pro" version of Atollic toolchain under Windows + CONFIG_STM32_DEVKITARM=y : devkitARM under Windows + CONFIG_STM32_RAISONANCE=y : Raisonance RIDE7 under Windows + CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) + + If you change the default toolchain, then you may also have to modify the PATH in + the setenv.sh file if your make cannot find the tools. + + NOTE: the CodeSourcery (for Windows), Atollic, devkitARM, and Raisonance toolchains are + Windows native toolchains. The CodeSourcey (for Linux) and NuttX buildroot + toolchains are Cygwin and/or Linux native toolchains. There are several limitations + to using a Windows based toolchain in a Cygwin environment. The three biggest are: + + 1. The Windows toolchain cannot follow Cygwin paths. Path conversions are + performed automatically in the Cygwin makefiles using the 'cygpath' utility + but you might easily find some new path problems. If so, check out 'cygpath -w' + + 2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic links + are used in Nuttx (e.g., include/arch). The make system works around these + problems for the Windows tools by copying directories instead of linking them. + But this can also cause some confusion for you: For example, you may edit + a file in a "linked" directory and find that your changes had no effect. + That is because you are building the copy of the file in the "fake" symbolic + directory. If you use a Windows toolchain, you should get in the habit of + making like this: + + make clean_context all + + An alias in your .bashrc file might make that less painful. + + 3. Dependencies are not made when using Windows versions of the GCC. This is + because the dependencies are generated using Windows pathes which do not + work with the Cygwin make. + + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + + The CodeSourcery Toolchain (2009q1) + ----------------------------------- + The CodeSourcery toolchain (2009q1) does not work with default optimization + level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with + -Os. + + The Atollic "Pro" and "Lite" Toolchain + -------------------------------------- + One problem that I had with the Atollic toolchains is that the provide a gcc.exe + and g++.exe in the same bin/ file as their ARM binaries. If the Atollic bin/ path + appears in your PATH variable before /usr/bin, then you will get the wrong gcc + when you try to build host executables. This will cause to strange, uninterpretable + errors build some host binaries in tools/ when you first make. + + The Atollic "Lite" Toolchain + ---------------------------- + The free, "Lite" version of the Atollic toolchain does not support C++ nor + does it support ar, nm, objdump, or objdcopy. If you use the Atollic "Lite" + toolchain, you will have to set: + + CONFIG_HAVE_CXX=n + + In order to compile successfully. Otherwise, you will get errors like: + + "C++ Compiler only available in TrueSTUDIO Professional" + + The make may then fail in some of the post link processing because of some of + the other missing tools. The Make.defs file replaces the ar and nm with + the default system x86 tool versions and these seem to work okay. Disable all + of the following to avoid using objcopy: + + CONFIG_RRLOAD_BINARY=n + CONFIG_INTELHEX_BINARY=n + CONFIG_MOTOROLA_SREC=n + CONFIG_RAW_BINARY=n + + devkitARM + --------- + The devkitARM toolchain includes a version of MSYS make. Make sure that the + the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM + path or will get the wrong version of make. + +IDEs +==== + + NuttX is built using command-line make. It can be used with an IDE, but some + effort will be required to create the project. + + Makefile Build + -------------- + Under Eclipse, it is pretty easy to set up an "empty makefile project" and + simply use the NuttX makefile to build the system. That is almost for free + under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty + makefile project in order to work with Windows (Google for "Eclipse Cygwin" - + there is a lot of help on the internet). + + Native Build + ------------ + Here are a few tips before you start that effort: + + 1) Select the toolchain that you will be using in your .config file + 2) Start the NuttX build at least one time from the Cygwin command line + before trying to create your project. This is necessary to create + certain auto-generated files and directories that will be needed. + 3) Set up include pathes: You will need include/, arch/arm/src/stm32, + arch/arm/src/common, arch/arm/src/armv7-m, and sched/. + 4) All assembly files need to have the definition option -D __ASSEMBLY__ + on the command line. + + Startup files will probably cause you some headaches. The NuttX startup file + is arch/arm/src/stm32/stm32_vectors.S. With RIDE, I have to build NuttX + one time from the Cygwin command line in order to obtain the pre-built + startup object needed by RIDE. + +NuttX EABI "buildroot" Toolchain +================================ + + A GNU GCC-based toolchain is assumed. The files */setenv.sh should + be modified to point to the correct path to the Cortex-M3 GCC toolchain (if + different from the default in your PATH variable). + + If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX + SourceForge download site (https://sourceforge.net/projects/nuttx/files/buildroot/). + This GNU toolchain builds and executes in the Linux or Cygwin environment. + + 1. You must have already configured Nuttx in <some-dir>/nuttx. + + cd tools + ./configure.sh stm32f100rc_generic/<sub-dir> + + 2. Download the latest buildroot package into <some-dir> + + 3. unpack the buildroot tarball. The resulting directory may + have versioning information on it like buildroot-x.y.z. If so, + rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot. + + 4. cd <some-dir>/buildroot + + 5. cp configs/cortexm3-eabi-defconfig-4.6.3 .config + + 6. make oldconfig + + 7. make + + 8. Edit setenv.h, if necessary, so that the PATH variable includes + the path to the newly built binaries. + + See the file configs/README.txt in the buildroot source tree. That has more + details PLUS some special instructions that you will need to follow if you are + building a Cortex-M3 toolchain for Cygwin under Windows. + + NOTE: Unfortunately, the 4.6.3 EABI toolchain is not compatible with the + the NXFLAT tools. See the top-level TODO file (under "Binary loaders") for + more information about this problem. If you plan to use NXFLAT, please do not + use the GCC 4.6.3 EABI toochain; instead use the GCC 4.3.3 OABI toolchain. + See instructions below. + +NuttX OABI "buildroot" Toolchain +================================ + + The older, OABI buildroot toolchain is also available. To use the OABI + toolchain: + + 1. When building the buildroot toolchain, either (1) modify the cortexm3-eabi-defconfig-4.6.3 + configuration to use EABI (using 'make menuconfig'), or (2) use an exising OABI + configuration such as cortexm3-defconfig-4.3.3 + + 2. Modify the Make.defs file to use the OABI conventions: + + +CROSSDEV = arm-nuttx-elf- + +ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft + +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections + -CROSSDEV = arm-nuttx-eabi- + -ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft + -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections + +NXFLAT Toolchain +================ + + If you are *not* using the NuttX buildroot toolchain and you want to use + the NXFLAT tools, then you will still have to build a portion of the buildroot + tools -- just the NXFLAT tools. The buildroot with the NXFLAT tools can + be downloaded from the NuttX SourceForge download site + (https://sourceforge.net/projects/nuttx/files/). + + This GNU toolchain builds and executes in the Linux or Cygwin environment. + + 1. You must have already configured Nuttx in <some-dir>/nuttx. + + cd tools + ./configure.sh lpcxpresso-lpc1768/<sub-dir> + + 2. Download the latest buildroot package into <some-dir> + + 3. unpack the buildroot tarball. The resulting directory may + have versioning information on it like buildroot-x.y.z. If so, + rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot. + + 4. cd <some-dir>/buildroot + + 5. cp configs/cortexm3-defconfig-nxflat .config + + 6. make oldconfig + + 7. make + + 8. Edit setenv.h, if necessary, so that the PATH variable includes + the path to the newly builtNXFLAT binaries. + +LEDs +==== + +It is asumed that STMicro STM32F100RC generic board board has one LED on PA0. +You should configure the port and pin number in +configs/stm32f100rc_generic/src/stm32f100rc_internal.h. This LED is not used by +the board port unless CONFIG_ARCH_LEDS is defined. In that case, the usage by +the board port is defined in include/board.h and src/up_leds.c. The LED is used +to encode OS-related events as follows: + + SYMBOL Meaning LED1* + green + ------------------- ----------------------- ------- + LED_STARTED NuttX has been started ON + LED_HEAPALLOCATE Heap has been allocated ON + LED_IRQSENABLED Interrupts enabled ON + LED_STACKCREATED Idle stack created ON + LED_INIRQ In an interrupt ON + LED_SIGNAL In a signal handler ON + LED_ASSERTION An assertion failed OFF + LED_PANIC The system has crashed OFF + +So basically if the LED is off it means that there is a problem. + +UART +==== + +Default USART/UART Configuration +-------------------------------- + +USART1 is enabled in all configurations (see */defconfig). RX and TX are +configured on pins PA10 and PA9, respectively. Then connect the RX pin of +your USB/Serial adapter to TX pin (PA9) and the TX pin of your adapter to +RX pin (PA10) of your board besides, of course, the GND pin. + +"STMicro STM32F100RC generic" specific Configuration Options +============================================================ + + CONFIG_ARCH - Identifies the arch/ subdirectory. This should + be set to: + + CONFIG_ARCH=arm + + CONFIG_ARCH_family - For use in C code: + + CONFIG_ARCH_ARM=y + + CONFIG_ARCH_architecture - For use in C code: + + CONFIG_ARCH_CORTEXM3=y + + CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory + + CONFIG_ARCH_CHIP=stm32 + + CONFIG_ARCH_CHIP_name - For use in C code to identify the exact + chip: + + CONFIG_ARCH_CHIP_STM32F100RB=y + + CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG - Enables special STM32 clock + configuration features. + + CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=n + + CONFIG_ARCH_BOARD - Identifies the configs subdirectory and + hence, the board that supports the particular chip or SoC. + + CONFIG_ARCH_BOARD=stm32vldiscovery + + CONFIG_ARCH_BOARD_name - For use in C code + + CONFIG_ARCH_BOARD_STM32VL_DISCOVERY=y + + CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation + of delay loops + + CONFIG_ENDIAN_BIG - define if big endian (default is little + endian) + + CONFIG_RAM_SIZE - Describes the installed DRAM (SRAM in this case): + + CONFIG_RAM_SIZE=24576 (24kB) + + CONFIG_RAM_START - The start address of installed DRAM + + CONFIG_RAM_START=0x20000000 + + CONFIG_ARCH_IRQPRIO - STM32F100RC chip supports interrupt prioritization + + CONFIG_ARCH_IRQPRIO=y + + CONFIG_ARCH_LEDS - Use LED to show state. Unique to boards that have LED(s) + + CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt + stack. If defined, this symbol is the size of the interrupt + stack in bytes. If not defined, the user task stacks will be + used during interrupt handling. + + CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions + + CONFIG_ARCH_CALIBRATION - when used togeter with CONFIG_DEBUG enables some + build in instrumentation that cause a 100 second delay during boot-up. + This 100 second delay serves no purpose other than it allows you to + calibratre CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to + measure the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until + the delay actually is 100 seconds. + + Individual subsystems can be enabled: + + AHB + ---- + CONFIG_STM32_CRC + CONFIG_STM32_DMA1 + CONFIG_STM32_DMA2 + + APB1 + ---- + CONFIG_STM32_TIM2 + CONFIG_STM32_TIM3 + CONFIG_STM32_TIM4 + CONFIG_STM32_TIM5 + CONFIG_STM32_TIM6 + CONFIG_STM32_TIM7 + CONFIG_STM32_TIM12 + CONFIG_STM32_TIM13 + CONFIG_STM32_TIM14 + CONFIG_STM32_RTC + CONFIG_STM32_WWDG + CONFIG_STM32_IWDG + CONFIG_STM32_SPI2 + CONFIG_STM32_SPI3 + CONFIG_STM32_USART2 + CONFIG_STM32_USART3 + CONFIG_STM32_UART4 + CONFIG_STM32_UART5 + CONFIG_STM32_I2C1 + CONFIG_STM32_I2C2 + CONFIG_STM32_PWR -- Required for RTC + CONFIG_STM32_BKP -- Required for RTC + CONFIG_STM32_DAC1 + CONFIG_STM32_DAC2 + CONFIG_STM32_CEC + + APB2 + ---- + CONFIG_STM32_ADC1 + CONFIG_STM32_TIM1 + CONFIG_STM32_SPI1 + CONFIG_STM32_USART1 + CONFIG_STM32_TIM15 + CONFIG_STM32_TIM16 + CONFIG_STM32_TIM17 + + Timer devices may be used for different purposes. One special purpose is + to generate modulated outputs for such things as motor control. If CONFIG_STM32_TIMn + is defined (as above) then the following may also be defined to indicate that + the timer is intended to be used for pulsed output modulation, ADC conversion, + or DAC conversion. Note that ADC/DAC require two definition: Not only do you have + to assign the timer (n) for used by the ADC or DAC, but then you also have to + configure which ADC or DAC (m) it is assigned to. + + CONFIG_STM32_TIMn_PWM Reserve timer n for use by PWM, n=1,..,17 + CONFIG_STM32_TIMn_ADC Reserve timer n for use by ADC, n=1,..,17 + CONFIG_STM32_TIMn_ADC1 Reserve timer n to trigger ADCm, n=1,..,17 + CONFIG_STM32_TIMn_DAC Reserve timer n for use by DAC, n=1,..,17 + CONFIG_STM32_TIMn_DACm Reserve timer n to trigger DACm, n=1,..,17, m=1,..,2 + + For each timer that is enabled for PWM usage, we need the following additional + configuration settings: + + CONFIG_STM32_TIMx_CHANNEL - Specifies the timer output channel {1,..,4} + + NOTE: The STM32 timers are each capable of generating different signals on + each of the four channels with different duty cycles. That capability is + not supported by this driver: Only one output channel per timer. + + JTAG Enable settings (by default full SWJ is enabled): + + CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) + CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) + but without JNTRST. + CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled + + STMicro STM32F100RC generic specific device driver settings + + CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the USARTn (n=1,2,3) or UART + m (m=4,5) for the console and ttys0 (default is the USART1). + CONFIG_U[S]ARTn_RXBUFSIZE - Characters are buffered as received. + This specific the size of the receive buffer + CONFIG_U[S]ARTn_TXBUFSIZE - Characters are buffered before + being sent. This specific the size of the transmit buffer + CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART. Must be + CONFIG_U[S]ARTn_BITS - The number of bits. Must be either 7 or 8. + CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity + CONFIG_U[S]ARTn_2STOP - Two stop bits + +Configurations +============== + +Each STMicro STM32F100RC generic configuration is maintained in a sub-directory +and can be selected as follow: + + cd tools + ./configure.sh stm32f100rc_generic/<subdir> + cd - + . ./setenv.sh + +Where <subdir> is one of the following: + + ostest: + ------ + This configuration directory, performs a simple OS test using + apps/examples/ostest. + + NOTES: + + 1. This configuration uses the mconf-based configuration tool. To + change this configuration using that tool, you should: + + a. Build and install the mconf tool. See nuttx/README.txt and + misc/tools/ + + b. Execute 'make menuconfig' in nuttx/ in order to start the + reconfiguration process. + + 2. Default toolchain: + + CONFIG_STM32_CODESOURCERYL=y : CodeSourcery under Linux / Mac OS X + + 3. By default, this project assumes that you are *NOT* using the DFU + bootloader. + + nsh: + --- + Configures the NuttShell (nsh) located at apps/examples/nsh. The + Configuration enables only the serial NSH interfaces. + + Default toolchain: + + CONFIG_STM32_CODESOURCERYL=y : CodeSourcery under Linux / Mac OS X |