diff options
Diffstat (limited to 'nuttx/configs/ubw32/README.txt')
| -rw-r--r-- | nuttx/configs/ubw32/README.txt | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/nuttx/configs/ubw32/README.txt b/nuttx/configs/ubw32/README.txt index ff0642f37..5c3c076e1 100644 --- a/nuttx/configs/ubw32/README.txt +++ b/nuttx/configs/ubw32/README.txt @@ -170,7 +170,7 @@ MAX3232 Connection RX -- J4 pin 30: U1RX/RF2 GND -- J4 pin 40: GND Vcc -- J4 pin 39: 5V - + Toolchains ========== @@ -262,7 +262,7 @@ Toolchains Windows Native Toolchains ------------------------- - + NOTE: There are several limitations to using a Windows based toolchain in a Cygwin environment. The three biggest are: @@ -342,7 +342,7 @@ LEDs ----- ----- ------------------------------------------------------------- LABEL COLOR CONTROL ----- ----- ------------------------------------------------------------- - USB Green RF3. This could be used by software if USB is not used. + USB Green RF3. This could be used by software if USB is not used. Otherwise, RF3 is used as the USBID signal. LED1 While RE2, Pulled up. Low value illuminates LED2 Red RE1, Pulled up. Low value illuminates @@ -369,7 +369,7 @@ Buttons RE6 User switch RE7 Program switch - + PIC32MX Configuration Options ============================= @@ -493,7 +493,7 @@ PIC32MX Configuration Options CONFIG_PIC32MX_CODEWP - Default 1 (disabled) DEVCFG1: (All settings determined by selections in board.h) DEVCFG2: (All settings determined by selections in board.h) - DEVCFG3: + DEVCFG3: CONFIG_PIC32MX_USBIDO - USB USBID Selection. Default 1 if USB enabled (USBID pin is controlled by the USB module), but 0 (GPIO) otherwise. CONFIG_PIC32MX_VBUSIO - USB VBUSON Selection (Default 1 if USB enabled @@ -604,7 +604,7 @@ Where <subdir> is one of the following: RX -- J4 pin 30: U1RX/RF2 GND -- J4 pin 40: GND Vcc -- J4 pin 39: 5V - + 3. USB Configuations Several USB device configurations can be enabled and included |