1 files changed, 117 insertions, 0 deletions
diff --git a/nuttx/configs/xtrs/src/xtr_irq.c b/nuttx/configs/xtrs/src/xtr_irq.c
new file mode 100644
index 000000000..44df0fe4d
--- /dev/null
+++ b/nuttx/configs/xtrs/src/xtr_irq.c
@@ -0,0 +1,117 @@
+/****************************************************************************
+ * board/xtr_irq.c
+ *
+ *   Copyright (C) 2008 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <nuttx/irq.h>
+
+#include "up_arch.h"
+#include "os_internal.h"
+#include "up_internal.h"
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_irqinitialize
+ ****************************************************************************/
+
+void up_irqinitialize(void)
+{
+  /* Attach the timer interrupt -- There is not special timer interrupt
+   * enable in the simulation so it must be enabled here before interrupts
+   * are enabled.
+   *
+   * NOTE:  Normally, there are seperate enables for "global" interrupts
+   * and specific device interrupts.  In such a "normal" case, the timer
+   * interrupt should be attached and enabled in the the function up_timerinit()
+   */
+
+  irq_attach(Z80_IRQ_SYSTIMER, (xcpt_t)up_timerisr);
+
+  /* And finally, enable interrupts (including the timer) */
+
+#ifndef CONFIG_SUPPRESS_INTERRUPTS
+  irqrestore(Z80_C_FLAG);
+#endif
+}
+
+/****************************************************************************
+ * Name: up_disable_irq
+ *
+ * Description:
+ *   Disable the IRQ specified by 'irq'
+ *
+ ****************************************************************************/
+
+void up_disable_irq(int irq)
+{
+  irqrestore(0);
+}
+
+/****************************************************************************
+ * Name: up_enable_irq
+ *
+ * Description:
+ *   Enable the IRQ specified by 'irq'
+ *
+ ****************************************************************************/
+
+void up_enable_irq(int irq)
+{
+ irqrestore(TRUE);
+}