1 files changed, 90 insertions, 90 deletions
diff --git a/nuttx/configs/z16f2800100zcog/src/z16f_lowinit.c b/nuttx/configs/z16f2800100zcog/src/z16f_lowinit.c
index 3c2c43ec8..2eb7d701b 100644
--- a/nuttx/configs/z16f2800100zcog/src/z16f_lowinit.c
+++ b/nuttx/configs/z16f2800100zcog/src/z16f_lowinit.c
@@ -1,90 +1,90 @@
-/***************************************************************************
- * configs/z16f2800100zcog/src/z16f_lowinit.c
- *
- *   Copyright (C) 2008 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
- *
- * Based upon sample code included with the Zilog ZDS-II toolchain.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ***************************************************************************/
-
-/***************************************************************************
- * Included Files
- ***************************************************************************/
-
-#include <nuttx/config.h>
-
-#include "chip/chip.h"
-
-/***************************************************************************
- * Definitions
- ***************************************************************************/
-
-/***************************************************************************
- * Private Functions
- ***************************************************************************/
-
-static void z16f_gpioinit(void)
-{
-  /* Configure LEDs and Run/Stop switch port */
-
-  putreg8(getreg8(Z16F_GPIOA_DD) | 0x87, Z16F_GPIOA_DD);
-  putreg8(getreg8(Z16F_GPIOA_OUT) | 0x07, Z16F_GPIOA_OUT);
-  putreg8(getreg8(Z16F_GPIOA_DD) & 0xF8, Z16F_GPIOA_DD);
-
-  /* Configure rate switch port */
-
-  putreg8(getreg8(Z16F_GPIOB_DD) | 0x20, Z16F_GPIOB_DD);
-  putreg8(getreg8(Z16F_GPIOB_AFL) | 0x20, Z16F_GPIOB_AFL);
-
-#if 0 /* Not yet */
-  putreg8(0x05, Z16F_ADC0_MAX);
-  putreg8(0xf5, Z16F_ADC0_CTL);
-#endif
-
-  /* Configure Direction switch port */
-
-  putreg8(getreg8(Z16F_GPIOC_DD) | 0x01, Z16F_GPIOC_DD);
-
-  /* Configure to use both UART0 and 1 */
-
-  putreg8(getreg8(Z16F_GPIOA_AFL) | 0x30, Z16F_GPIOA_AFL);
-  putreg8(getreg8(Z16F_GPIOD_AFL) | 0x30, Z16F_GPIOD_AFL);
-}
-
-/***************************************************************************
- * Public Functions
- ***************************************************************************/
-
-void z16f_lowinit(void)
-{
-  z16f_gpioinit();
-}
-
+/***************************************************************************
+ * configs/z16f2800100zcog/src/z16f_lowinit.c
+ *
+ *   Copyright (C) 2008 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Based upon sample code included with the Zilog ZDS-II toolchain.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+/***************************************************************************
+ * Included Files
+ ***************************************************************************/
+
+#include <nuttx/config.h>
+
+#include "chip/chip.h"
+
+/***************************************************************************
+ * Definitions
+ ***************************************************************************/
+
+/***************************************************************************
+ * Private Functions
+ ***************************************************************************/
+
+static void z16f_gpioinit(void)
+{
+  /* Configure LEDs and Run/Stop switch port */
+
+  putreg8(getreg8(Z16F_GPIOA_DD) | 0x87, Z16F_GPIOA_DD);
+  putreg8(getreg8(Z16F_GPIOA_OUT) | 0x07, Z16F_GPIOA_OUT);
+  putreg8(getreg8(Z16F_GPIOA_DD) & 0xF8, Z16F_GPIOA_DD);
+
+  /* Configure rate switch port */
+
+  putreg8(getreg8(Z16F_GPIOB_DD) | 0x20, Z16F_GPIOB_DD);
+  putreg8(getreg8(Z16F_GPIOB_AFL) | 0x20, Z16F_GPIOB_AFL);
+
+#if 0 /* Not yet */
+  putreg8(0x05, Z16F_ADC0_MAX);
+  putreg8(0xf5, Z16F_ADC0_CTL);
+#endif
+
+  /* Configure Direction switch port */
+
+  putreg8(getreg8(Z16F_GPIOC_DD) | 0x01, Z16F_GPIOC_DD);
+
+  /* Configure to use both UART0 and 1 */
+
+  putreg8(getreg8(Z16F_GPIOA_AFL) | 0x30, Z16F_GPIOA_AFL);
+  putreg8(getreg8(Z16F_GPIOD_AFL) | 0x30, Z16F_GPIOD_AFL);
+}
+
+/***************************************************************************
+ * Public Functions
+ ***************************************************************************/
+
+void z16f_lowinit(void)
+{
+  z16f_gpioinit();
+}
+