1 files changed, 136 insertions, 0 deletions
diff --git a/nuttx/configs/zp214xpa/README.txt b/nuttx/configs/zp214xpa/README.txt
new file mode 100644
index 000000000..6fd7bfba9
--- /dev/null
+++ b/nuttx/configs/zp214xpa/README.txt
@@ -0,0 +1,136 @@
+zp214xpa README FILE
+====================
+
+The ZP213X/4XPA board from the0.net with LPC2148 installed.
+Includes support for the UG-2864AMBAG01 OLED from The0.net.
+
+Contents
+========
+
+  o MCU Connections
+  o Serial Console
+  o Configurations
+
+MCU Connections:
+================
+
+Module Socket:
+--------------
+PIN NAME  PIN NAME
+ 1  VBAT  56  VCC
+ 2  3V3   55  Vusb
+ 3  VREF  54  3V3
+ 4  P0.0  53  RESET
+ 5  P0.1  52  P1.31
+ 6  P0.2  51  P1.30
+ 7  P0.3  50  P1.29
+ 8  P0.4  49  P1.28
+ 9  P0.5  48  P1.27
+10  P0.6  47  P1.26
+11  P0.7  46  P1.25
+12  P0.8  45  P1.24
+13  P0.9  44  P1.23
+14  P0.10 43  P1.22
+15  P0.11 42  P1.21
+16  P0.12 41  P1.20
+17  P0.13 40  P1.19
+18  P0.14 39  P1.18
+19  P0.15 38  P1.17
+20  P0.16 37  P1.16
+21  P0.17 36  P0.31
+22  P0.18 35  P0.30
+23  P0.19 34  P0.29
+24  P0.20 33  P0.28
+25  P0.21 32  P0.27
+26  P0.22 31  P0.26
+27  P0.23 30  P0.25
+28  GND   29  GND
+
+JTAG Debug:
+-----------
+PIN NAME       PIN NAME
+ 1  VCC1        2  3V3
+ 3  P1.31 NTRST 4  GND
+ 5  P1.28 TDI   6  GND
+ 7  P1.30 TMS   8  GND
+ 9  P1.29 TCK  10  GND
+11  P1.26 RTCK 12  GND
+13  P1.27 TDO  14  GND
+15  RESET NRTS 16  GND
+17  N/C   NC0  18  GND
+19  N/C   NC1  20  GND
+
+Z28160 Net Module:
+------------------
+PIN NAME      PIN NAME
+ 1  P0.7  /CS 10  3V3   VCC
+ 2  P0.4  SCK  9  P1.24 RST
+ 3  P0.6  SI   8  N/C   CLKOUT
+ 4  P0.5  SO   7  INT   P1.25
+ 5  GND        6  N/C   WOL
+
+SPI LCD:
+--------
+PIN NAME
+ 1  3V3   3V3
+ 2  VCC   5V
+ 3  P0.18 RESET(DO)
+ 4  P0.19 DI
+ 5  P0.20 CS
+ 6  P0.17 SCK
+ 7  P0.23 A0(RESET)
+ 8  N/C   LED-
+ 9  N/C   LED+(BL)
+10  GND   GND
+
+USB Interface:
+--------------
+Vusb, P0.26, P0.27
+
+Serial Console:
+===============
+
+Both UART0 and UART1 are always enabled.  UART0 is configured to be the
+serial console in these configurations.
+
+P0.0/TXD0/PWM1        Module Socket, Pin 4
+P0.1/RxD0/PWM3/EINT0  Module Socket, Pin 5
+
+P0.8/TXD1/PWM4/AD1.1  Module Socket, Pin 12
+P0.9/RxD1/PWM6/EINT3  Module Socket, Pin 13
+
+Configurations:
+===============
+
+Each NXP LPC214x configuration is maintained in a sudirectory and
+can be selected as follow:
+
+    cd tools
+    ./configure.sh zp214xpa/<subdir>
+    cd -
+    . ./setenv.sh
+
+Where <subdir> is one of the following:
+
+nsh:
+----
+
+  Configures the NuttShell (nsh) located at examples/nsh.  The
+  Configuration enables only the serial NSH interfaces.
+
+    NOTES:
+ 
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
+
+       a. Build and install the mconf tool.  See nuttx/README.txt and
+          misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. Default platform/toolchain:
+
+       CONFIG_HOST_LINUX=y             : Windows
+       CONFIG_ARM_TOOLCHAIN_GNU_EABI=y : Buildroot (arm-nuttx-elf-gcc)
+       CONFIG_RAW_BINARY=y             : Output formats: ELF and raw binary