diff options
Diffstat (limited to 'nuttx/configs')
29 files changed, 982 insertions, 431 deletions
diff --git a/nuttx/configs/Kconfig b/nuttx/configs/Kconfig index a89e7cdea..bc3759722 100644 --- a/nuttx/configs/Kconfig +++ b/nuttx/configs/Kconfig @@ -555,7 +555,7 @@ config ARCH_BOARD_XTRS config ARCH_BOARD_Z16F2800100ZCOG bool "Zilog Z16F2800100ZCOG Development Kit" - depends on ARCH_CHIP_Z16F281 + depends on ARCH_CHIP_Z16F2811 select ARCH_HAVE_LEDS ---help--- z16f Microcontroller. This port use the ZiLIG z16f2800100zcog diff --git a/nuttx/configs/cloudctrl/nsh/defconfig b/nuttx/configs/cloudctrl/nsh/defconfig index 5547333d8..440cb3e0b 100644 --- a/nuttx/configs/cloudctrl/nsh/defconfig +++ b/nuttx/configs/cloudctrl/nsh/defconfig @@ -569,8 +569,8 @@ CONFIG_EXAMPLES_NSH=y # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities diff --git a/nuttx/configs/ez80f910200kitg/README.txt b/nuttx/configs/ez80f910200kitg/README.txt index 004f607d4..e314b0fe1 100644 --- a/nuttx/configs/ez80f910200kitg/README.txt +++ b/nuttx/configs/ez80f910200kitg/README.txt @@ -116,8 +116,8 @@ available: b. You can't use setenv.sh in the native Windows environment. Try scripts/setenv.bat instead. c. At present, the native Windows build fails at the final link stages. - The failure is due to problems in arch/z80/src/nuttx/linkcmd that - is autogenerated by arch/z80/src/Makefile.zdsii. The basic program + The failure is due to problems in arch/z80/src/nuttx.linkcmd that + is autogenerated by arch/z80/src/Makefile.zdsii. The basic problem is the spurious spaces and and carrirage returns are generated at the end of the lines after a line continuation (\ ^M). If these trailing bad characters are manually eliminated, then the build diff --git a/nuttx/configs/ez80f910200kitg/ostest/defconfig b/nuttx/configs/ez80f910200kitg/ostest/defconfig index 757916281..0e399cfc7 100644 --- a/nuttx/configs/ez80f910200kitg/ostest/defconfig +++ b/nuttx/configs/ez80f910200kitg/ostest/defconfig @@ -402,8 +402,8 @@ CONFIG_EXAMPLES_OSTEST_RR_RUNS=10 # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities diff --git a/nuttx/configs/ez80f910200zco/README.txt b/nuttx/configs/ez80f910200zco/README.txt index bc4e11e27..1bc9e56b8 100644 --- a/nuttx/configs/ez80f910200zco/README.txt +++ b/nuttx/configs/ez80f910200zco/README.txt @@ -130,8 +130,8 @@ ostest b. You can't use setenv.sh in the native Windows environment. Try scripts/setenv.bat instead. c. At present, the native Windows build fails at the final link stages. - The failure is due to problems in arch/z80/src/nuttx/linkcmd that - is autogenerated by arch/z80/src/Makefile.zdsii. The basic program + The failure is due to problems in arch/z80/src/nuttx.linkcmd that + is autogenerated by arch/z80/src/Makefile.zdsii. The basic problem is the spurious spaces and and carrirage returns are generated at the end of the lines after a line continuation (\ ^M). If these trailing bad characters are manually eliminated, then the build diff --git a/nuttx/configs/ez80f910200zco/ostest/defconfig b/nuttx/configs/ez80f910200zco/ostest/defconfig index c82a60e3a..7597bcfd6 100644 --- a/nuttx/configs/ez80f910200zco/ostest/defconfig +++ b/nuttx/configs/ez80f910200zco/ostest/defconfig @@ -410,8 +410,8 @@ CONFIG_EXAMPLES_OSTEST_RR_RUNS=10 # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities diff --git a/nuttx/configs/fire-stm32v2/nsh/defconfig b/nuttx/configs/fire-stm32v2/nsh/defconfig index f126c51fd..8e371686b 100644 --- a/nuttx/configs/fire-stm32v2/nsh/defconfig +++ b/nuttx/configs/fire-stm32v2/nsh/defconfig @@ -812,8 +812,8 @@ CONFIG_EXAMPLES_USBMSC_DEVPATH3="/dev/mmcsd2" # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities diff --git a/nuttx/configs/shenzhou/nsh/defconfig b/nuttx/configs/shenzhou/nsh/defconfig index c1e1818a5..4c73b7a6c 100644 --- a/nuttx/configs/shenzhou/nsh/defconfig +++ b/nuttx/configs/shenzhou/nsh/defconfig @@ -569,8 +569,8 @@ CONFIG_EXAMPLES_NSH=y # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities diff --git a/nuttx/configs/shenzhou/nxwm/defconfig b/nuttx/configs/shenzhou/nxwm/defconfig index a5ccc8bfb..ccc411a4d 100644 --- a/nuttx/configs/shenzhou/nxwm/defconfig +++ b/nuttx/configs/shenzhou/nxwm/defconfig @@ -841,8 +841,8 @@ CONFIG_NAMEDAPP=y # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities diff --git a/nuttx/configs/shenzhou/thttpd/defconfig b/nuttx/configs/shenzhou/thttpd/defconfig index 82884f4c3..e8f189282 100644 --- a/nuttx/configs/shenzhou/thttpd/defconfig +++ b/nuttx/configs/shenzhou/thttpd/defconfig @@ -741,8 +741,8 @@ CONFIG_EXAMPLES_NSH=y # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities diff --git a/nuttx/configs/sim/cxxtest/defconfig b/nuttx/configs/sim/cxxtest/defconfig index 1f99a6333..9c1da5494 100644 --- a/nuttx/configs/sim/cxxtest/defconfig +++ b/nuttx/configs/sim/cxxtest/defconfig @@ -361,8 +361,8 @@ CONFIG_EXAMPLES_CXXTEST=y # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities diff --git a/nuttx/configs/sim/ostest/defconfig b/nuttx/configs/sim/ostest/defconfig index 708c82a79..26d132cd0 100644 --- a/nuttx/configs/sim/ostest/defconfig +++ b/nuttx/configs/sim/ostest/defconfig @@ -351,8 +351,8 @@ CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=8 # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities diff --git a/nuttx/configs/stm3240g-eval/discover/defconfig b/nuttx/configs/stm3240g-eval/discover/defconfig index d7165573c..aefa05326 100644 --- a/nuttx/configs/stm3240g-eval/discover/defconfig +++ b/nuttx/configs/stm3240g-eval/discover/defconfig @@ -765,8 +765,8 @@ CONFIG_EXAMPLES_DISCOVER_NETMASK=0xffffff00 # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities diff --git a/nuttx/configs/stm3240g-eval/xmlrpc/defconfig b/nuttx/configs/stm3240g-eval/xmlrpc/defconfig index 308203e27..dd72d6ab3 100644 --- a/nuttx/configs/stm3240g-eval/xmlrpc/defconfig +++ b/nuttx/configs/stm3240g-eval/xmlrpc/defconfig @@ -760,8 +760,8 @@ CONFIG_EXAMPLES_XMLRPC_NETMASK=0xffffff00 # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities diff --git a/nuttx/configs/stm32f100rc_generic/nsh/defconfig b/nuttx/configs/stm32f100rc_generic/nsh/defconfig index b5698ad18..41bb86592 100644 --- a/nuttx/configs/stm32f100rc_generic/nsh/defconfig +++ b/nuttx/configs/stm32f100rc_generic/nsh/defconfig @@ -490,8 +490,8 @@ CONFIG_EXAMPLES_NSH=y # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities diff --git a/nuttx/configs/stm32f100rc_generic/ostest/defconfig b/nuttx/configs/stm32f100rc_generic/ostest/defconfig index 92faa7f03..c56503e1f 100644 --- a/nuttx/configs/stm32f100rc_generic/ostest/defconfig +++ b/nuttx/configs/stm32f100rc_generic/ostest/defconfig @@ -478,8 +478,8 @@ CONFIG_EXAMPLES_OSTEST_RR_RUNS=10 # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities diff --git a/nuttx/configs/stm32f4discovery/cxxtest/defconfig b/nuttx/configs/stm32f4discovery/cxxtest/defconfig index 6648d3b13..1b3df6d32 100644 --- a/nuttx/configs/stm32f4discovery/cxxtest/defconfig +++ b/nuttx/configs/stm32f4discovery/cxxtest/defconfig @@ -489,8 +489,8 @@ CONFIG_EXAMPLES_CXXTEST=y # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities diff --git a/nuttx/configs/stm32f4discovery/elf/defconfig b/nuttx/configs/stm32f4discovery/elf/defconfig index e4702507c..8d98fe696 100644 --- a/nuttx/configs/stm32f4discovery/elf/defconfig +++ b/nuttx/configs/stm32f4discovery/elf/defconfig @@ -485,8 +485,8 @@ CONFIG_EXAMPLES_ELF_DEVPATH="/dev/ram0" # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities diff --git a/nuttx/configs/stm32f4discovery/nxlines/defconfig b/nuttx/configs/stm32f4discovery/nxlines/defconfig index 286dd55ed..4de3a0922 100644 --- a/nuttx/configs/stm32f4discovery/nxlines/defconfig +++ b/nuttx/configs/stm32f4discovery/nxlines/defconfig @@ -591,8 +591,8 @@ CONFIG_EXAMPLES_NXLINES_BPP=16 # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities diff --git a/nuttx/configs/stm32f4discovery/ostest/defconfig b/nuttx/configs/stm32f4discovery/ostest/defconfig index da7c8d200..d260a87cb 100644 --- a/nuttx/configs/stm32f4discovery/ostest/defconfig +++ b/nuttx/configs/stm32f4discovery/ostest/defconfig @@ -498,8 +498,8 @@ CONFIG_EXAMPLES_OSTEST_RR_RUNS=10 # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities diff --git a/nuttx/configs/stm32f4discovery/winbuild/defconfig b/nuttx/configs/stm32f4discovery/winbuild/defconfig index e52719f25..311dd075d 100644 --- a/nuttx/configs/stm32f4discovery/winbuild/defconfig +++ b/nuttx/configs/stm32f4discovery/winbuild/defconfig @@ -498,8 +498,8 @@ CONFIG_EXAMPLES_OSTEST_RR_RUNS=10 # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities diff --git a/nuttx/configs/z16f2800100zcog/README.txt b/nuttx/configs/z16f2800100zcog/README.txt index 55ed22b10..0c69c75bc 100644 --- a/nuttx/configs/z16f2800100zcog/README.txt +++ b/nuttx/configs/z16f2800100zcog/README.txt @@ -94,13 +94,75 @@ Where <sub-directory> is the specific board configuration that you wish to build. The following board-specific configurations are available: -- ostest +ostest +------ + This builds the examples/ostest application for execution from FLASH. See examples/README.txt for information about ostest. -- pashello + NOTES: + + 1. This configuration uses the mconf-based configuration tool. To + change this configuration using that tool, you should: + + a. Build and install the mconf tool. See nuttx/README.txt and + misc/tools/ + + b. Execute 'make menuconfig' in nuttx/ in order to start the + reconfiguration process. + + 2. By default, this configuration assumes that you are using the + Cygwin environment on Windows. An option is to use the native + CMD.exe window build as described in the top-level README.txt + file. To set up that configuration: + + -CONFIG_WINDOWS_CYGWIN=y + +CONFIG_WINDOWS_NATIVE=y + + And after configuring, make sure that CONFIG_APPS_DIR uses + the back slash character. For example: + + CONFIG_APPS_DIR="..\apps" + + NOTES: + + a. If you need to change the toolchain path used in Make.defs, you + will need to use the short 8.3 filenames to avoid spaces. On my + PC, C:\PROGRA~1\ is is C:\Program Files\ and C:\PROGRA~2\ is + C:\Program Files (x86)\ + b. You can't use setenv.sh in the native Windows environment. Try + scripts/setenv.bat instead. + c. At present, the native Windows build fails at the final link stages. + The failure is due to problems in arch/z16/src/nuttx.linkcmd that + is autogenerated by arch/z16/src/Makefile. The basic problem + is the spurious spaces and and carrirage returns are generated at + the end of the lines after a line continuation (\ ^M). If these + trailing bad characters are manually eliminated, then the build + will succeed on the next try. + +pashello +-------- Configures to use examples/pashello for execution from FLASH See examples/README.txt for information about pashello. + NOTES: + + 1. This configuration uses the mconf-based configuration tool. To + change this configuration using that tool, you should: + + a. Build and install the mconf tool. See nuttx/README.txt and + misc/tools/ + + b. Execute 'make menuconfig' in nuttx/ in order to start the + reconfiguration process. + + 2. The last time I tried building this configuration, there were + a few undefined symbols from the PCODE logic. It might require + a little TLC to get this all working again. + + 3. The native windows build has not been tried with this configuration + but should, in principle, work (see notes for the ostest configuration + above). + Check out any README.txt files in these <sub-directory>s. diff --git a/nuttx/configs/z16f2800100zcog/ostest/appconfig b/nuttx/configs/z16f2800100zcog/ostest/appconfig deleted file mode 100644 index a0f5d2462..000000000 --- a/nuttx/configs/z16f2800100zcog/ostest/appconfig +++ /dev/null @@ -1,39 +0,0 @@ -############################################################################ -# configs/z16f2800100zcog/ostest/appconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/ostest - diff --git a/nuttx/configs/z16f2800100zcog/ostest/defconfig b/nuttx/configs/z16f2800100zcog/ostest/defconfig index 16f017778..027d6d73c 100644 --- a/nuttx/configs/z16f2800100zcog/ostest/defconfig +++ b/nuttx/configs/z16f2800100zcog/ostest/defconfig @@ -1,150 +1,174 @@ -############################################################################ -# configs/z16f2800100zcog/ostest/defconfig -# -# Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# Architecture selection # -CONFIG_ARCH="z16" +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +# CONFIG_INTELHEX_BINARY is not set +# CONFIG_MOTOROLA_SREC is not set +# CONFIG_RAW_BINARY is not set + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +CONFIG_DEBUG=y +# CONFIG_DEBUG_VERBOSE is not set +# CONFIG_DEBUG_ENABLE is not set + +# +# Subsystem Debug Options +# +# CONFIG_DEBUG_MM is not set +# CONFIG_DEBUG_SCHED is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_LIB is not set +# CONFIG_DEBUG_BINFMT is not set +# CONFIG_DEBUG_GRAPHICS is not set + +# +# Driver Debug Options +# +# CONFIG_DEBUG_ANALOG is not set +# CONFIG_DEBUG_DMA is not set +# CONFIG_DEBUG_SYMBOLS is not set + +# +# System Type +# +# CONFIG_ARCH_8051 is not set +# CONFIG_ARCH_ARM is not set +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set CONFIG_ARCH_Z16=y +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="z16" CONFIG_ARCH_CHIP="z16f" -CONFIG_ARCH_CHIP_Z16F=y -CONFIG_ARCH_CHIP_Z16F2810=n -CONFIG_ARCH_CHIP_Z16F2811=y -CONFIG_ARCH_CHIP_Z16F3211=n -CONFIG_ARCH_CHIP_Z16F6411=n -CONFIG_ARCH_BOARD="z16f2800100zcog" -CONFIG_ARCH_BOARD_Z16F2800100ZCOG=y -CONFIG_ARCH_NOINTC=n -CONFIG_ARCH_IRQPRIO=y CONFIG_BOARD_LOOPSPERMSEC=1250 -CONFIG_ENDIAN_BIG=y -CONFIG_DRAM_SIZE=65536 -CONFIG_ARCH_LEDS=y + # -# Z16F specific device driver settings +# Z16 Configuration Options # -CONFIG_UART0_SERIAL_CONSOLE=y -CONFIG_UART1_SERIAL_CONSOLE=n -CONFIG_UART0_TXBUFSIZE=256 -CONFIG_UART1_TXBUFSIZE=256 -CONFIG_UART0_RXBUFSIZE=256 -CONFIG_UART1_RXBUFSIZE=256 -CONFIG_UART0_BAUD=57600 -CONFIG_UART1_BAUD=57600 -CONFIG_UART0_PARITY=0 -CONFIG_UART1_PARITY=0 -CONFIG_UART0_2STOP=0 -CONFIG_UART1_2STOP=0 +# CONFIG_ARCH_CHIP_Z16F2810 is not set +CONFIG_ARCH_CHIP_Z16F2811=y +# CONFIG_ARCH_CHIP_Z16F3211 is not set +# CONFIG_ARCH_CHIP_Z16F6411 is not set +CONFIG_ARCH_CHIP_Z16F=y # -# General build options +# Common Configuration Options # -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=n -CONFIG_RAW_BINARY=n # -# General OS setup +# Z16F Configuration Options # -CONFIG_USER_ENTRYPOINT="ostest_main" -CONFIG_DEBUG=y -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_MM_REGIONS=1 -CONFIG_ARCH_LOWPUTC=y -CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n -CONFIG_TASK_NAME_SIZE=0 -CONFIG_START_YEAR=2008 -CONFIG_START_MONTH=1 -CONFIG_START_DAY=28 -CONFIG_JULIAN_TIME=n -CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=y -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n -CONFIG_SDCLONE_DISABLE=y +CONFIG_Z16F_UART0=y +CONFIG_Z16F_UART1=y # -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. +# Architecture Options # -# There are certain dependency relationships in these -# features. +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_IRQPRIO=y +# CONFIG_ARCH_STACKDUMP is not set +CONFIG_ENDIAN_BIG=y + # -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. +# Board Settings # -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=n -CONFIG_DISABLE_ENVIRON=n -CONFIG_DISABLE_POLL=y +CONFIG_DRAM_START= +CONFIG_DRAM_SIZE=65536 # -# Misc libc settings +# Boot options # -CONFIG_NOPRINTF_FIELDWIDTH=y +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_Z16F2800100ZCOG=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="z16f2800100zcog" # -# Allow for architecture optimized implementations +# Common Board Options # -# The architecture can provide optimized versions of the -# following to improve sysem performance +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y + +# +# Board-Specific Options # -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n + +# +# RTOS Features +# +CONFIG_MSEC_PER_TICK=10 +CONFIG_RR_INTERVAL=200 +# CONFIG_SCHED_INSTRUMENTATION is not set +CONFIG_TASK_NAME_SIZE=0 +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2012 +CONFIG_START_MONTH=11 +CONFIG_START_DAY=29 +CONFIG_DEV_CONSOLE=y +CONFIG_DEV_LOWCONSOLE=y +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_SCHED_WAITPID is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="ostest_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_DISABLE_ENVIRON is not set +CONFIG_DISABLE_POLL=y # # Sizes of configurable things (0 disables) @@ -155,8 +179,6 @@ CONFIG_NPTHREAD_KEYS=4 CONFIG_NFILE_DESCRIPTORS=8 CONFIG_NFILE_STREAMS=8 CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=256 -CONFIG_NUNGET_CHARS=2 CONFIG_PREALLOC_MQ_MSGS=4 CONFIG_MQ_MAXMSGSIZE=32 CONFIG_MAX_WDOGPARMS=2 @@ -164,62 +186,307 @@ CONFIG_PREALLOC_WDOGS=4 CONFIG_PREALLOC_TIMERS=4 # -# TCP/IP and UDP support via uIP +# Stack and heap information +# +# CONFIG_CUSTOM_STACK is not set +CONFIG_IDLETHREAD_STACKSIZE=4096 +CONFIG_USERMAIN_STACKSIZE=4096 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=4096 + # -CONFIG_NET=n -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=0 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 -CONFIG_NET_TCP=n -CONFIG_NET_TCP_CONNS=40 -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=n -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=n -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n +# Device Drivers +# +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +# CONFIG_LOWLEVEL_CONSOLE is not set +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_UART0=y +CONFIG_ARCH_HAVE_UART1=y +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +CONFIG_UART0_SERIAL_CONSOLE=y +# CONFIG_UART1_SERIAL_CONSOLE is not set +# CONFIG_NO_SERIAL_CONSOLE is not set # -# UIP Network Utilities +# UART0 Configuration # -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 +CONFIG_UART0_RXBUFSIZE=256 +CONFIG_UART0_TXBUFSIZE=256 +CONFIG_UART0_BAUD=57600 +CONFIG_UART0_BITS=8 +CONFIG_UART0_PARITY=0 +CONFIG_UART0_2STOP=0 # -# Settings for examples/nsh -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_CMD_SIZE=40 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=0x0a000002 -CONFIG_NSH_DRIPADDR=0x0a000001 -CONFIG_NSH_NETMASK=0xffffff00 +# UART1 Configuration +# +CONFIG_UART1_RXBUFSIZE=256 +CONFIG_UART1_TXBUFSIZE=256 +CONFIG_UART1_BAUD=57600 +CONFIG_UART1_BITS=8 +CONFIG_UART1_PARITY=0 +CONFIG_UART1_2STOP=0 +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set # -# Stack and heap information +# System Logging Device Options # -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_IDLETHREAD_STACKSIZE=4096 -CONFIG_USERMAIN_STACKSIZE=4096 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=4096 -CONFIG_HEAP_SIZE= -CONFIG_HEAP_BASE= # -# Maintain legacy build behavior (revisit) +# System Logging +# +# CONFIG_RAMLOG is not set + +# +# Networking Support +# +# CONFIG_NET is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_FS_FAT is not set +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set + +# +# System Logging +# +# CONFIG_SYSLOG is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=1 +CONFIG_ARCH_HAVE_HEAP2=y +CONFIG_HEAP2_BASE=0x00000000 +CONFIG_HEAP2_SIZE=0 +# CONFIG_GRAN is not set + +# +# Binary Formats +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# +CONFIG_STDIO_BUFFER_SIZE=256 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_LIBM is not set +CONFIG_NOPRINTF_FIELDWIDTH=y +# CONFIG_LIBC_FLOATINGPOINT is not set +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set + +# +# Basic CXX Support +# +# CONFIG_HAVE_CXX is not set + +# +# Application Configuration +# + +# +# Named Applications +# +# CONFIG_NAMEDAPP is not set + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_CDCACM is not set +# CONFIG_EXAMPLES_COMPOSITE is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_NETTEST is not set +# CONFIG_EXAMPLES_NSH is not set +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +CONFIG_EXAMPLES_OSTEST=y +# CONFIG_EXAMPLES_OSTEST_BUILTIN is not set +CONFIG_EXAMPLES_OSTEST_LOOPS=1 +CONFIG_EXAMPLES_OSTEST_STACKSIZE=8192 +CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=8 +CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000 +CONFIG_EXAMPLES_OSTEST_RR_RUNS=10 +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POLL is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set +# CONFIG_EXAMPLES_WLAN is not set + +# +# Interpreters # -CONFIG_MMCSD=y -CONFIG_MMCSD_SPI=y -CONFIG_MMCSD_SDIO=y +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_RESOLV is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set + +# +# ModBus +# + +# +# FreeModbus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +# CONFIG_NSH_LIBRARY is not set + +# +# NxWidgets/NxWM +# + +# +# System NSH Add-Ons +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# readline() +# +# CONFIG_SYSTEM_READLINE is not set + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set diff --git a/nuttx/configs/z16f2800100zcog/pashello/defconfig b/nuttx/configs/z16f2800100zcog/pashello/defconfig index eec7b1575..c9f0d9673 100644 --- a/nuttx/configs/z16f2800100zcog/pashello/defconfig +++ b/nuttx/configs/z16f2800100zcog/pashello/defconfig @@ -1,225 +1,486 @@ -############################################################################ -# configs/z16f2800100zcog/pashello/defconfig -# -# Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# Architecture selection # -CONFIG_ARCH="z16" +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +# CONFIG_INTELHEX_BINARY is not set +# CONFIG_MOTOROLA_SREC is not set +# CONFIG_RAW_BINARY is not set + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +CONFIG_DEBUG=y +# CONFIG_DEBUG_VERBOSE is not set +# CONFIG_DEBUG_ENABLE is not set + +# +# Subsystem Debug Options +# +# CONFIG_DEBUG_MM is not set +# CONFIG_DEBUG_SCHED is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_LIB is not set +# CONFIG_DEBUG_BINFMT is not set +# CONFIG_DEBUG_GRAPHICS is not set + +# +# Driver Debug Options +# +# CONFIG_DEBUG_ANALOG is not set +# CONFIG_DEBUG_DMA is not set +# CONFIG_DEBUG_SYMBOLS is not set + +# +# System Type +# +# CONFIG_ARCH_8051 is not set +# CONFIG_ARCH_ARM is not set +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set CONFIG_ARCH_Z16=y +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="z16" CONFIG_ARCH_CHIP="z16f" -CONFIG_ARCH_CHIP_Z16F=y -CONFIG_ARCH_CHIP_Z16F2810=n +CONFIG_BOARD_LOOPSPERMSEC=1250 + +# +# Z16 Configuration Options +# +# CONFIG_ARCH_CHIP_Z16F2810 is not set CONFIG_ARCH_CHIP_Z16F2811=y -CONFIG_ARCH_CHIP_Z16F3211=n -CONFIG_ARCH_CHIP_Z16F6411=n -CONFIG_ARCH_BOARD="z16f2800100zcog" -CONFIG_ARCH_BOARD_Z16F2800100ZCOG=y -CONFIG_ARCH_NOINTC=n +# CONFIG_ARCH_CHIP_Z16F3211 is not set +# CONFIG_ARCH_CHIP_Z16F6411 is not set +CONFIG_ARCH_CHIP_Z16F=y + +# +# Common Configuration Options +# + +# +# Z16F Configuration Options +# +CONFIG_Z16F_UART0=y +CONFIG_Z16F_UART1=y + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_DMA is not set CONFIG_ARCH_IRQPRIO=y -CONFIG_BOARD_LOOPSPERMSEC=1250 +# CONFIG_ARCH_STACKDUMP is not set CONFIG_ENDIAN_BIG=y + +# +# Board Settings +# +CONFIG_DRAM_START= CONFIG_DRAM_SIZE=65536 -CONFIG_ARCH_LEDS=y + # -# Z16F specific device driver settings +# Boot options # -CONFIG_UART0_SERIAL_CONSOLE=y -CONFIG_UART1_SERIAL_CONSOLE=n -CONFIG_UART0_TXBUFSIZE=256 -CONFIG_UART1_TXBUFSIZE=256 -CONFIG_UART0_RXBUFSIZE=256 -CONFIG_UART1_RXBUFSIZE=256 -CONFIG_UART0_BAUD=57600 -CONFIG_UART1_BAUD=57600 -CONFIG_UART0_PARITY=0 -CONFIG_UART1_PARITY=0 -CONFIG_UART0_2STOP=0 -CONFIG_UART1_2STOP=0 +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set # -# General build options +# Board Selection # -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=n -CONFIG_RAW_BINARY=n +CONFIG_ARCH_BOARD_Z16F2800100ZCOG=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="z16f2800100zcog" # -# General OS setup +# Common Board Options # -CONFIG_USER_ENTRYPOINT="pashello_main" -CONFIG_DEBUG=y -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_MM_REGIONS=1 -CONFIG_ARCH_LOWPUTC=y +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y + +# +# Board-Specific Options +# + +# +# RTOS Features +# +CONFIG_MSEC_PER_TICK=10 CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n +# CONFIG_SCHED_INSTRUMENTATION is not set CONFIG_TASK_NAME_SIZE=0 +# CONFIG_JULIAN_TIME is not set CONFIG_START_YEAR=2008 CONFIG_START_MONTH=1 CONFIG_START_DAY=28 -CONFIG_JULIAN_TIME=n CONFIG_DEV_CONSOLE=y CONFIG_DEV_LOWCONSOLE=y -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set CONFIG_SDCLONE_DISABLE=y +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_SCHED_WAITPID is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="pashello_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_DISABLE_ENVIRON is not set +CONFIG_DISABLE_POLL=y # -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. +# Sizes of configurable things (0 disables) # -# There are certain dependency relationships in these -# features. +CONFIG_MAX_TASKS=16 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_NPTHREAD_KEYS=4 +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=4 +CONFIG_PREALLOC_TIMERS=4 + # -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. +# Stack and heap information # -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=n -CONFIG_DISABLE_ENVIRON=n -CONFIG_DISABLE_POLL=y +# CONFIG_CUSTOM_STACK is not set +CONFIG_IDLETHREAD_STACKSIZE=4096 +CONFIG_USERMAIN_STACKSIZE=4096 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=4096 # -# Misc libc settings +# Device Drivers +# +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +# CONFIG_LOWLEVEL_CONSOLE is not set +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_UART0=y +CONFIG_ARCH_HAVE_UART1=y +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +CONFIG_UART0_SERIAL_CONSOLE=y +# CONFIG_UART1_SERIAL_CONSOLE is not set +# CONFIG_NO_SERIAL_CONSOLE is not set + # -CONFIG_NOPRINTF_FIELDWIDTH=y +# UART0 Configuration +# +CONFIG_UART0_RXBUFSIZE=256 +CONFIG_UART0_TXBUFSIZE=256 +CONFIG_UART0_BAUD=57600 +CONFIG_UART0_BITS=8 +CONFIG_UART0_PARITY=0 +CONFIG_UART0_2STOP=0 # -# Allow for architecture optimized implementations +# UART1 Configuration # -# The architecture can provide optimized versions of the -# following to improve sysem performance +CONFIG_UART1_RXBUFSIZE=256 +CONFIG_UART1_TXBUFSIZE=256 +CONFIG_UART1_BAUD=57600 +CONFIG_UART1_BITS=8 +CONFIG_UART1_PARITY=0 +CONFIG_UART1_2STOP=0 +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options # -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n # -# Sizes of configurable things (0 disables) +# System Logging +# +# CONFIG_RAMLOG is not set + +# +# Networking Support +# +# CONFIG_NET is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_FS_FAT is not set +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set + +# +# System Logging +# +# CONFIG_SYSLOG is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=1 +CONFIG_ARCH_HAVE_HEAP2=y +CONFIG_HEAP2_BASE=0x00000000 +CONFIG_HEAP2_SIZE=0 +# CONFIG_GRAN is not set + +# +# Binary Formats +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines # -CONFIG_MAX_TASKS=16 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=4 -CONFIG_NFILE_DESCRIPTORS=8 -CONFIG_NFILE_STREAMS=8 -CONFIG_NAME_MAX=32 CONFIG_STDIO_BUFFER_SIZE=256 +CONFIG_STDIO_LINEBUFFER=y CONFIG_NUNGET_CHARS=2 -CONFIG_PREALLOC_MQ_MSGS=4 -CONFIG_MQ_MAXMSGSIZE=32 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=4 -CONFIG_PREALLOC_TIMERS=4 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_LIBM is not set +CONFIG_NOPRINTF_FIELDWIDTH=y +# CONFIG_LIBC_FLOATINGPOINT is not set +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set + +# +# Basic CXX Support +# +# CONFIG_HAVE_CXX is not set # -# TCP/IP and UDP support via uIP +# Application Configuration # -CONFIG_NET=n -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=0 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 -CONFIG_NET_TCP=n -CONFIG_NET_TCP_CONNS=40 -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=n -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=n -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n # -# UIP Network Utilities +# Named Applications # -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 +# CONFIG_NAMEDAPP is not set # -# Settings for examples/nsh -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_CMD_SIZE=40 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=0x0a000002 -CONFIG_NSH_DRIPADDR=0x0a000001 -CONFIG_NSH_NETMASK=0xffffff00 +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_CDCACM is not set +# CONFIG_EXAMPLES_COMPOSITE is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_NETTEST is not set +# CONFIG_EXAMPLES_NSH is not set +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +CONFIG_EXAMPLES_PASHELLO=y +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POLL is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set +# CONFIG_EXAMPLES_WLAN is not set # -# Stack and heap information +# Interpreters +# + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +CONFIG_INTERPRETERS_PCODE=y + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_RESOLV is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set + +# +# ModBus +# + +# +# FreeModbus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +# CONFIG_NSH_LIBRARY is not set + +# +# NxWidgets/NxWM # -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_IDLETHREAD_STACKSIZE=4096 -CONFIG_USERMAIN_STACKSIZE=4096 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=4096 -CONFIG_HEAP_SIZE= -CONFIG_HEAP_BASE= # -# Maintain legacy build behavior (revisit) +# System NSH Add-Ons # -CONFIG_MMCSD=y -CONFIG_MMCSD_SPI=y -CONFIG_MMCSD_SDIO=y +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# readline() +# +# CONFIG_SYSTEM_READLINE is not set + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set diff --git a/nuttx/configs/z8encore000zco/README.txt b/nuttx/configs/z8encore000zco/README.txt index 9ec1b80af..7ca50db8c 100644 --- a/nuttx/configs/z8encore000zco/README.txt +++ b/nuttx/configs/z8encore000zco/README.txt @@ -101,8 +101,8 @@ available: b. You can't use setenv.sh in the native Windows environment. Try scripts/setenv.bat instead. c. At present, the native Windows build fails at the final link stages. - The failure is due to problems in arch/z80/src/nuttx/linkcmd that - is autogenerated by arch/z80/src/Makefile.zdsii. The basic program + The failure is due to problems in arch/z80/src/nuttx.linkcmd that + is autogenerated by arch/z80/src/Makefile.zdsii. The basic problem is the spurious spaces and and carrirage returns are generated at the end of the lines after a line continuation (\ ^M). If these trailing bad characters are manually eliminated, then the build diff --git a/nuttx/configs/z8encore000zco/ostest/defconfig b/nuttx/configs/z8encore000zco/ostest/defconfig index a79355b71..7ff44faae 100644 --- a/nuttx/configs/z8encore000zco/ostest/defconfig +++ b/nuttx/configs/z8encore000zco/ostest/defconfig @@ -397,8 +397,8 @@ CONFIG_EXAMPLES_OSTEST_RR_RUNS=10 # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities diff --git a/nuttx/configs/z8f64200100kit/README.txt b/nuttx/configs/z8f64200100kit/README.txt index 7356c8e87..b0f224ad8 100644 --- a/nuttx/configs/z8f64200100kit/README.txt +++ b/nuttx/configs/z8f64200100kit/README.txt @@ -101,8 +101,8 @@ available: b. You can't use setenv.sh in the native Windows environment. Try scripts/setenv.bat instead. c. At present, the native Windows build fails at the final link stages. - The failure is due to problems in arch/z80/src/nuttx/linkcmd that - is autogenerated by arch/z80/src/Makefile.zdsii. The basic program + The failure is due to problems in arch/z80/src/nuttx.linkcmd that + is autogenerated by arch/z80/src/Makefile.zdsii. The basic problem is the spurious spaces and and carrirage returns are generated at the end of the lines after a line continuation (\ ^M). If these trailing bad characters are manually eliminated, then the build diff --git a/nuttx/configs/z8f64200100kit/ostest/defconfig b/nuttx/configs/z8f64200100kit/ostest/defconfig index 2389a0d34..1650600cd 100644 --- a/nuttx/configs/z8f64200100kit/ostest/defconfig +++ b/nuttx/configs/z8f64200100kit/ostest/defconfig @@ -397,8 +397,8 @@ CONFIG_EXAMPLES_OSTEST_RR_RUNS=10 # # Interpreters # -# CONFIG_FICL is not set -# CONFIG_PCODE is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # # Network Utilities |