diff options
Diffstat (limited to 'nuttx/configs')
| -rw-r--r-- | nuttx/configs/pjrc-8051/Kconfig | 7 | ||||
| -rw-r--r-- | nuttx/configs/pjrc-8051/Make.defs | 170 | ||||
| -rw-r--r-- | nuttx/configs/pjrc-8051/README.txt | 54 | ||||
| -rw-r--r-- | nuttx/configs/pjrc-8051/defconfig | 577 | ||||
| -rw-r--r-- | nuttx/configs/pjrc-8051/include/board.h | 51 | ||||
| -rw-r--r-- | nuttx/configs/pjrc-8051/include/pjrc.h | 215 | ||||
| -rw-r--r-- | nuttx/configs/pjrc-8051/sdcc-2.6.0.patch | 28 | ||||
| -rwxr-xr-x | nuttx/configs/pjrc-8051/setenv.sh | 65 | ||||
| -rw-r--r-- | nuttx/configs/pjrc-8051/src/.gitignore | 15 | ||||
| -rw-r--r-- | nuttx/configs/pjrc-8051/src/Makefile | 75 | ||||
| -rw-r--r-- | nuttx/configs/pjrc-8051/src/up_leds.c | 207 |
11 files changed, 0 insertions, 1464 deletions
diff --git a/nuttx/configs/pjrc-8051/Kconfig b/nuttx/configs/pjrc-8051/Kconfig deleted file mode 100644 index 921bc732c..000000000 --- a/nuttx/configs/pjrc-8051/Kconfig +++ /dev/null @@ -1,7 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see misc/tools/kconfig-language.txt. -# - -if ARCH_BOARD_PJRC_87C52 -endif diff --git a/nuttx/configs/pjrc-8051/Make.defs b/nuttx/configs/pjrc-8051/Make.defs deleted file mode 100644 index d4716dedc..000000000 --- a/nuttx/configs/pjrc-8051/Make.defs +++ /dev/null @@ -1,170 +0,0 @@ -############################################################################ -# configs/pjrc-8051/Make.defs -# -# Copyright (C) 2007, 2008, 2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -include ${TOPDIR}/.config -include ${TOPDIR}/tools/Config.mk - -# These are the directories where the SDCC toolchain is installed. NOTE -# that short 8.3 path names are used in order to avoid spaces. On my machine -# I have: -# -# C:\PROGRA~1\ = C:\Profram Files\ -# C:\PROGRA~2\ = C:\Program Files (x86)\ -# -# Your PC may be configured differently. - -ifeq ($(CONFIG_WINDOWS_NATIVE),y) - SDCC_INSTALLDIR = C:\PROGRA~2\SDCC - SDCC_BINDIR = $(SDCC_INSTALLDIR)\bin - SDCC_LIBDIR = $(SDCC_INSTALLDIR)\lib\large-stack-auto -else - SDCC_INSTALLDIR = /usr/local - SDCC_BINDIR = $(SDCC_INSTALLDIR)/bin - SDCC_LIBDIR = $(SDCC_INSTALLDIR)/share/sdcc/lib/large-stack-auto -endif - -CROSSDEV = -CC = sdcc -CPP = sdcpp -LD = sdld -AS = sdas8051 -AR = sdar -r - -IRAM_SIZE = 0x100 -DEF_STACK_BASE = 0x24 - -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - ARCHOPTIMIZATION = --debug -else - ARCHOPTIMIZATION = -endif - -ARCHCPUFLAGS = -mmcs51 --stack-auto --model-large --int-long-reent --float-reent -ARCHPICFLAGS = -ARCHWARNINGS = -ARCHDEFINES = -ARCHINCLUDES = -I. -I$(TOPDIR)/include - -CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -AFLAGS = -x -j -g -l -s -p - -SDCCLIB = libsdcc.lib - -ASMEXT = .asm -OBJEXT = .rel -LIBEXT = .lib -EXEEXT = .hex - -# Custom ASSEMBLE definition. The most common toolchain, GCC, uses the -# compiler to assemble files because this has the advantage of running the C -# Pre-Processor against. This is not possible with other SDCC; we need to -# define AS and over-ride the common definition in order to use the assembler -# directly. - -define ASSEMBLE - @echo "AS: $1" - @$(AS) $(AFLAGS) $1 -endef - -# Custom CLEAN definition - -ifeq ($(CONFIG_WINDOWS_NATIVE),y) -define CLEAN - $(Q) if exist *.o (del /f /q *.o) - $(Q) if exist *.asm (del /f /q *.asm) - $(Q) if exist *.rel (del /f /q *.rel) - $(Q) if exist *.lst (del /f /q *.lst) - $(Q) if exist *.rst (del /f /q *.rst) - $(Q) if exist *.sym (del /f /q *.sym) - $(Q) if exist *.adb (del /f /q *.adb) - $(Q) if exist *.lnk (del /f /q *.lnk) - $(Q) if exist *.map (del /f /q *.map) - $(Q) if exist *.mem (del /f /q *.mem) - $(Q) if exist *.hex (del /f /q *.hex) - $(Q) if exist *.cmd (del /f /q *.cmd) -endef -else -define CLEAN - $(Q) rm -f *.o *.asm *.rel *.lst *.rst *.sym *.adb *.lnk *.map *.mem *.hex *.cmd -endef -endif - -# Windows native host tool definitions - -ifeq ($(CONFIG_WINDOWS_NATIVE),y) - HOSTCC = mingw32-gcc.exe - HOSTINCLUDES = -I. - HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe - HOSTLDFLAGS = - HOSTEXEEXT = .exe - - # Windows-native host tools - - MKDEP = $(TOPDIR)\tools\mkdeps.exe --winnative - - # Use NTFS links or directory copies - -ifeq ($(CONFIG_WINDOWS_MKLINK),y) - DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)link.bat -else - DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.bat -endif -DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.bat - -else - -# Linux/Cygwin host tool definitions - - HOSTCC = gcc - HOSTINCLUDES = -I. - HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe - HOSTLDFLAGS = - - # This is the tool to use for dependencies (i.e., none) - - MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh - - # SDCC for Linux, OSX, or Cygwin understands symbolic links. Windows SDCC - # running under Cygwin does not - -ifeq ($(WINTOOL),y) - DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh -else - DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)link.sh -endif -DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh - -endif diff --git a/nuttx/configs/pjrc-8051/README.txt b/nuttx/configs/pjrc-8051/README.txt deleted file mode 100644 index 1343ec9db..000000000 --- a/nuttx/configs/pjrc-8051/README.txt +++ /dev/null @@ -1,54 +0,0 @@ -pjrc-8051 README -^^^^^^^^^^^^^^^^ - -This port uses the PJRC 87C52 development system and the SDCC toolchain. - -The PJRC 87C52 development system can be obtained from http://www.pjrc.com/. - -The SDCC toolchain is available from http://sdcc.sourceforge.net/. All -testing has been performed using verison 2.6.0 of the SDDC toolchain. - -Building the SDCC toolchain -^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -The SDCC toolchain is built with the standard configure/make/make install -sequence. However, some special actions are required to generate libraries -compatible with this build. First start with the usual steps - - download - unpack - cd sdcc - ./configure - make - -But before installing, we need to apply a patch to the SDCC 2.6.0 source. -WARNING: This patch is specific to the particular combination of CFLAGS -that are used in the compilation. If you change Make.defs, then you will -likely have to change the patch as well. - - Apply sdcc-2.6.0.patch - cd sdcc/device/lib - make model-mcs51-stack-auto - -Then - - cd sdcc - make install - -Status -^^^^^^ - -On December 9, 2012, I made updates so that the 8051 port could use the -newest SDCC toolchain (a pre-3.2.1 at that time). However, when I attempted -to build the PJRC-8051 configuration, I got type incompatibility errors -from sched/os_bringup.c. From what I gather by googling, this is a compiler -bug related to the --stack-auto option. - -I have not been successful working around those bugs and I believe that -these are 8051-related bugs in the SDCC toolchain. This needs to be -revisited with a later version of SDCC. - -This configuration was last successfully built and tested with a ca. -2.6.0 SDCC release. Support for that older toolchain was removed in -NuttX revision -r5423. If you wanted to used those older toolchains, -you would need to revert to a pre-r5423 revision. diff --git a/nuttx/configs/pjrc-8051/defconfig b/nuttx/configs/pjrc-8051/defconfig deleted file mode 100644 index 68a3a68ea..000000000 --- a/nuttx/configs/pjrc-8051/defconfig +++ /dev/null @@ -1,577 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Nuttx/ Configuration -# - -# -# Build Setup -# -# CONFIG_EXPERIMENTAL is not set -CONFIG_DEFAULT_SMALL=y -CONFIG_HOST_LINUX=y -# CONFIG_HOST_OSX is not set -# CONFIG_HOST_WINDOWS is not set -# CONFIG_HOST_OTHER is not set - -# -# Build Configuration -# -# CONFIG_APPS_DIR="../apps" -# CONFIG_BUILD_2PASS is not set - -# -# Binary Output Formats -# -# CONFIG_RRLOAD_BINARY is not set -# CONFIG_INTELHEX_BINARY is not set -# CONFIG_MOTOROLA_SREC is not set -# CONFIG_RAW_BINARY is not set - -# -# Customize Header Files -# -# CONFIG_ARCH_STDBOOL_H is not set -# CONFIG_ARCH_MATH_H is not set -# CONFIG_ARCH_FLOAT_H is not set -# CONFIG_ARCH_STDARG_H is not set - -# -# Debug Options -# -# CONFIG_DEBUG is not set -# CONFIG_ARCH_HAVE_STACKCHECK is not set -# CONFIG_ARCH_HAVE_HEAPCHECK is not set -# CONFIG_DEBUG_SYMBOLS is not set -# CONFIG_ARCH_HAVE_CUSTOMOPT is not set -# CONFIG_DEBUG_NOOPT is not set -CONFIG_DEBUG_FULLOPT=y - -# -# System Type -# -CONFIG_ARCH_8051=y -# CONFIG_ARCH_ARM is not set -# CONFIG_ARCH_AVR is not set -# CONFIG_ARCH_HC is not set -# CONFIG_ARCH_MIPS is not set -# CONFIG_ARCH_RGMP is not set -# CONFIG_ARCH_SH is not set -# CONFIG_ARCH_SIM is not set -# CONFIG_ARCH_X86 is not set -# CONFIG_ARCH_Z16 is not set -# CONFIG_ARCH_Z80 is not set -CONFIG_ARCH="8051" - -# -# ARM Options -# -# CONFIG_ARCH_CHIP_8051 is not set -CONFIG_ARCH_CHIP_8052=y - -# -# Bring-up Debug Options -# -CONFIG_ARCH_8051_BRINGUP=y -CONFIG_ARCH_8051_NOSYSTIMER=y -CONFIG_ARCH_8051_SUPRESS_INTERRUPTS=y - -# -# Architecture Options -# -# CONFIG_ARCH_NOINTC is not set -# CONFIG_ARCH_VECNOTIRQ is not set -# CONFIG_ARCH_DMA is not set -# CONFIG_ARCH_HAVE_IRQPRIO is not set -CONFIG_CUSTOM_STACK=y -# CONFIG_ARCH_ADDRENV is not set -# CONFIG_ARCH_HAVE_VFORK is not set -# CONFIG_ARCH_HAVE_MMU is not set -# CONFIG_ARCH_NAND_HWECC is not set -# CONFIG_ARCH_STACKDUMP is not set -# CONFIG_ENDIAN_BIG is not set -# CONFIG_ARCH_IDLE_CUSTOM is not set -# CONFIG_ARCH_HAVE_RAMFUNCS is not set -# CONFIG_ARCH_HAVE_RAMVECTORS is not set - -# -# Board Settings -# -CONFIG_BOARD_LOOPSPERMSEC=5000 -# CONFIG_ARCH_CALIBRATION is not set - -# -# Interrupt options -# -# CONFIG_ARCH_HAVE_INTERRUPTSTACK is not set -# CONFIG_ARCH_HAVE_HIPRI_INTERRUPT is not set - -# -# Boot options -# -# CONFIG_BOOT_RUNFROMEXTSRAM is not set -CONFIG_BOOT_RUNFROMFLASH=y -# CONFIG_BOOT_RUNFROMISRAM is not set -# CONFIG_BOOT_RUNFROMSDRAM is not set -# CONFIG_BOOT_COPYTORAM is not set - -# -# Boot Memory Configuration -# -CONFIG_RAM_START=0x0 -CONFIG_RAM_SIZE=0 -# CONFIG_ARCH_HAVE_SDRAM is not set - -# -# Board Selection -# -CONFIG_ARCH_BOARD_PJRC_87C52=y -# CONFIG_ARCH_BOARD_CUSTOM is not set -CONFIG_ARCH_BOARD="pjrc-8051" - -# -# Common Board Options -# -CONFIG_ARCH_HAVE_LEDS=y -CONFIG_ARCH_LEDS=y - -# -# Board-Specific Options -# - -# -# RTOS Features -# -# CONFIG_BOARD_INITIALIZE is not set -CONFIG_USEC_PER_TICK=10000 -# CONFIG_SYSTEM_TIME64 is not set -CONFIG_RR_INTERVAL=0 -# CONFIG_SCHED_CPULOAD is not set -# CONFIG_SCHED_INSTRUMENTATION is not set -CONFIG_TASK_NAME_SIZE=0 -# CONFIG_SCHED_HAVE_PARENT is not set -# CONFIG_JULIAN_TIME is not set -CONFIG_START_YEAR=2007 -CONFIG_START_MONTH=2 -CONFIG_START_DAY=21 -# CONFIG_DEV_CONSOLE is not set -# CONFIG_MUTEX_TYPES is not set -# CONFIG_PRIORITY_INHERITANCE is not set -# CONFIG_FDCLONE_DISABLE is not set -# CONFIG_FDCLONE_STDIO is not set -CONFIG_SDCLONE_DISABLE=y -# CONFIG_SCHED_WAITPID is not set -# CONFIG_SCHED_STARTHOOK is not set -# CONFIG_SCHED_ATEXIT is not set -# CONFIG_SCHED_ONEXIT is not set -CONFIG_USER_ENTRYPOINT="ostest_main" -CONFIG_DISABLE_OS_API=y -CONFIG_DISABLE_POSIX_TIMERS=y -CONFIG_DISABLE_PTHREAD=y -CONFIG_DISABLE_SIGNALS=y -CONFIG_DISABLE_MQUEUE=y -CONFIG_DISABLE_ENVIRON=y - -# -# Sizes of configurable things (0 disables) -# -CONFIG_MAX_TASKS=8 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=0 -CONFIG_NFILE_DESCRIPTORS=0 -CONFIG_NFILE_STREAMS=0 -CONFIG_NAME_MAX=32 -CONFIG_PREALLOC_MQ_MSGS=0 -CONFIG_MQ_MAXMSGSIZE=0 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=4 -CONFIG_PREALLOC_TIMERS=0 - -# -# Stack and heap information -# -CONFIG_IDLETHREAD_STACKSIZE=256 -CONFIG_USERMAIN_STACKSIZE=256 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=256 - -# -# Device Drivers -# -CONFIG_DISABLE_POLL=y -CONFIG_DEV_NULL=y -# CONFIG_DEV_ZERO is not set -# CONFIG_LOOP is not set -# CONFIG_RAMDISK is not set -# CONFIG_CAN is not set -# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set -# CONFIG_PWM is not set -# CONFIG_ARCH_HAVE_I2CRESET is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -# CONFIG_I2S is not set -# CONFIG_RTC is not set -# CONFIG_WATCHDOG is not set -# CONFIG_ANALOG is not set -# CONFIG_AUDIO_DEVICES is not set -# CONFIG_VIDEO_DEVICES is not set -# CONFIG_BCH is not set -# CONFIG_INPUT is not set -# CONFIG_LCD is not set -# CONFIG_MMCSD is not set -# CONFIG_MTD is not set -# CONFIG_PIPES is not set -# CONFIG_PM is not set -# CONFIG_POWER is not set -# CONFIG_SENSORS is not set -# CONFIG_SERCOMM_CONSOLE is not set -CONFIG_SERIAL=y -# CONFIG_DEV_LOWCONSOLE is not set -# CONFIG_16550_UART is not set -# CONFIG_ARCH_HAVE_UART is not set -# CONFIG_ARCH_HAVE_UART0 is not set -# CONFIG_ARCH_HAVE_UART1 is not set -# CONFIG_ARCH_HAVE_UART2 is not set -# CONFIG_ARCH_HAVE_UART3 is not set -# CONFIG_ARCH_HAVE_UART4 is not set -# CONFIG_ARCH_HAVE_UART5 is not set -# CONFIG_ARCH_HAVE_UART6 is not set -# CONFIG_ARCH_HAVE_UART7 is not set -# CONFIG_ARCH_HAVE_UART8 is not set -# CONFIG_ARCH_HAVE_SCI0 is not set -# CONFIG_ARCH_HAVE_SCI1 is not set -# CONFIG_ARCH_HAVE_USART0 is not set -# CONFIG_ARCH_HAVE_USART1 is not set -# CONFIG_ARCH_HAVE_USART2 is not set -# CONFIG_ARCH_HAVE_USART3 is not set -# CONFIG_ARCH_HAVE_USART4 is not set -# CONFIG_ARCH_HAVE_USART5 is not set -# CONFIG_ARCH_HAVE_USART6 is not set -# CONFIG_ARCH_HAVE_USART7 is not set -# CONFIG_ARCH_HAVE_USART8 is not set - -# -# USART Configuration -# -# CONFIG_MCU_SERIAL is not set -# CONFIG_STANDARD_SERIAL is not set -# CONFIG_SERIAL_IFLOWCONTROL is not set -# CONFIG_SERIAL_OFLOWCONTROL is not set -# CONFIG_USBDEV is not set -# CONFIG_USBHOST is not set -# CONFIG_WIRELESS is not set - -# -# System Logging Device Options -# - -# -# System Logging -# -# CONFIG_RAMLOG is not set - -# -# Networking Support -# -# CONFIG_ARCH_HAVE_NET is not set -# CONFIG_ARCH_HAVE_PHY is not set -# CONFIG_NET is not set - -# -# File Systems -# - -# -# File system configuration -# -CONFIG_DISABLE_MOUNTPOINT=y -CONFIG_DISABLE_PSEUDOFS_OPERATIONS=y -# CONFIG_FS_READABLE is not set -# CONFIG_FS_WRITABLE is not set -# CONFIG_FS_RAMMAP is not set -# CONFIG_FS_PROCFS is not set - -# -# System Logging -# -# CONFIG_SYSLOG_ENABLE is not set -# CONFIG_SYSLOG is not set - -# -# Graphics Support -# -# CONFIG_NX is not set - -# -# Memory Management -# -# CONFIG_MM_SMALL is not set -CONFIG_MM_REGIONS=2 -# CONFIG_ARCH_HAVE_HEAP2 is not set -# CONFIG_GRAN is not set - -# -# Audio Support -# -# CONFIG_AUDIO is not set - -# -# Binary Formats -# -# CONFIG_BINFMT_DISABLE is not set -# CONFIG_NXFLAT is not set -# CONFIG_ELF is not set -# CONFIG_BUILTIN is not set -# CONFIG_PIC is not set -# CONFIG_SYMTAB_ORDEREDBYNAME is not set - -# -# Library Routines -# - -# -# Standard C Library Options -# -CONFIG_STDIO_BUFFER_SIZE=0 -CONFIG_STDIO_LINEBUFFER=y -CONFIG_NUNGET_CHARS=0 -# CONFIG_LIBM is not set -CONFIG_NOPRINTF_FIELDWIDTH=y -# CONFIG_LIBC_FLOATINGPOINT is not set -CONFIG_LIB_RAND_ORDER=1 -# CONFIG_EOL_IS_CR is not set -# CONFIG_EOL_IS_LF is not set -# CONFIG_EOL_IS_BOTH_CRLF is not set -CONFIG_EOL_IS_EITHER_CRLF=y -# CONFIG_LIBC_EXECFUNCS is not set -CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=256 -CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=256 -# CONFIG_LIBC_STRERROR is not set -# CONFIG_LIBC_PERROR_STDOUT is not set -CONFIG_ARCH_LOWPUTC=y -CONFIG_LIB_SENDFILE_BUFSIZE=512 -# CONFIG_ARCH_ROMGETC is not set -# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set - -# -# Non-standard Library Support -# -# CONFIG_LIB_KBDCODEC is not set -# CONFIG_LIB_SLCDCODEC is not set - -# -# Basic CXX Support -# -# CONFIG_C99_BOOL8 is not set -# CONFIG_HAVE_CXX is not set - -# -# Application Configuration -# - -# -# Built-In Applications -# - -# -# Examples -# -# CONFIG_EXAMPLES_BUTTONS is not set -# CONFIG_EXAMPLES_CAN is not set -# CONFIG_EXAMPLES_CONFIGDATA is not set -# CONFIG_EXAMPLES_DHCPD is not set -# CONFIG_EXAMPLES_ELF is not set -# CONFIG_EXAMPLES_FTPC is not set -# CONFIG_EXAMPLES_FTPD is not set -# CONFIG_EXAMPLES_HELLO is not set -# CONFIG_EXAMPLES_HELLOXX is not set -# CONFIG_EXAMPLES_JSON is not set -# CONFIG_EXAMPLES_HIDKBD is not set -# CONFIG_EXAMPLES_KEYPADTEST is not set -# CONFIG_EXAMPLES_IGMP is not set -# CONFIG_EXAMPLES_LCDRW is not set -# CONFIG_EXAMPLES_MM is not set -# CONFIG_EXAMPLES_MODBUS is not set -# CONFIG_EXAMPLES_MOUNT is not set -# CONFIG_EXAMPLES_NRF24L01TERM is not set -# CONFIG_EXAMPLES_NSH is not set -# CONFIG_EXAMPLES_NULL is not set -# CONFIG_EXAMPLES_NX is not set -# CONFIG_EXAMPLES_NXCONSOLE is not set -# CONFIG_EXAMPLES_NXFFS is not set -# CONFIG_EXAMPLES_NXFLAT is not set -# CONFIG_EXAMPLES_NXHELLO is not set -# CONFIG_EXAMPLES_NXIMAGE is not set -# CONFIG_EXAMPLES_NXLINES is not set -# CONFIG_EXAMPLES_NXTEXT is not set -CONFIG_EXAMPLES_OSTEST=y -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=256 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=8 -CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000 -CONFIG_EXAMPLES_OSTEST_RR_RUNS=10 -# CONFIG_EXAMPLES_PASHELLO is not set -# CONFIG_EXAMPLES_PIPE is not set -# CONFIG_EXAMPLES_POLL is not set -# CONFIG_EXAMPLES_POSIXSPAWN is not set -# CONFIG_EXAMPLES_QENCODER is not set -# CONFIG_EXAMPLES_RGMP is not set -# CONFIG_EXAMPLES_ROMFS is not set -# CONFIG_EXAMPLES_SENDMAIL is not set -# CONFIG_EXAMPLES_SERLOOP is not set -# CONFIG_EXAMPLES_SLCD is not set -# CONFIG_EXAMPLES_SMART is not set -# CONFIG_EXAMPLES_TCPECHO is not set -# CONFIG_EXAMPLES_TELNETD is not set -# CONFIG_EXAMPLES_THTTPD is not set -# CONFIG_EXAMPLES_TIFF is not set -# CONFIG_EXAMPLES_TOUCHSCREEN is not set -# CONFIG_EXAMPLES_UDP is not set -# CONFIG_EXAMPLES_WEBSERVER is not set -# CONFIG_EXAMPLES_USBSERIAL is not set -# CONFIG_EXAMPLES_USBTERM is not set -# CONFIG_EXAMPLES_WATCHDOG is not set - -# -# Graphics Support -# -# CONFIG_TIFF is not set - -# -# Interpreters -# -# CONFIG_INTERPRETERS_FICL is not set -# CONFIG_INTERPRETERS_PCODE is not set - -# -# Network Utilities -# - -# -# Networking Utilities -# -# CONFIG_NETUTILS_CODECS is not set -# CONFIG_NETUTILS_DHCPD is not set -# CONFIG_NETUTILS_FTPC is not set -# CONFIG_NETUTILS_FTPD is not set -# CONFIG_NETUTILS_JSON is not set -# CONFIG_NETUTILS_SMTP is not set -# CONFIG_NETUTILS_TFTPC is not set -# CONFIG_NETUTILS_THTTPD is not set -# CONFIG_NETUTILS_NETLIB is not set -# CONFIG_NETUTILS_WEBCLIENT is not set - -# -# FreeModBus -# -# CONFIG_MODBUS is not set - -# -# NSH Library -# -# CONFIG_NSH_LIBRARY is not set - -# -# NxWidgets/NxWM -# - -# -# Platform-specific Support -# -# CONFIG_PLATFORM_CONFIGDATA is not set - -# -# System Libraries and NSH Add-Ons -# - -# -# USB CDC/ACM Device Commands -# - -# -# USB Composite Device Commands -# - -# -# Custom Free Memory Command -# -# CONFIG_SYSTEM_FREE is not set - -# -# I2C tool -# - -# -# INI File Parser -# -# CONFIG_SYSTEM_INIFILE is not set - -# -# FLASH Program Installation -# -# CONFIG_SYSTEM_INSTALL is not set - -# -# FLASH Erase-all Command -# - -# -# NxPlayer media player library / command Line -# -# CONFIG_SYSTEM_NXPLAYER is not set - -# -# RAM test -# -# CONFIG_SYSTEM_RAMTEST is not set - -# -# readline() -# -# CONFIG_SYSTEM_READLINE is not set - -# -# Power Off -# -# CONFIG_SYSTEM_POWEROFF is not set - -# -# RAMTRON -# -# CONFIG_SYSTEM_RAMTRON is not set - -# -# SD Card -# -# CONFIG_SYSTEM_SDCARD is not set - -# -# Sysinfo -# -# CONFIG_SYSTEM_SYSINFO is not set - -# -# USB Monitor -# - -# -# EMACS-like Command Line Editor -# -# CONFIG_SYSTEM_CLE is not set - -# -# VI Work-Alike Editor -# -# CONFIG_SYSTEM_VI is not set - -# -# Stack Monitor -# - -# -# USB Mass Storage Device Commands -# - -# -# Zmodem Commands -# -# CONFIG_SYSTEM_ZMODEM is not set diff --git a/nuttx/configs/pjrc-8051/include/board.h b/nuttx/configs/pjrc-8051/include/board.h deleted file mode 100644 index 9f518f81e..000000000 --- a/nuttx/configs/pjrc-8051/include/board.h +++ /dev/null @@ -1,51 +0,0 @@ -/************************************************************ - * board/board.h - * - * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************/ - -#ifndef __ARCH_BOARD_BOARD_H -#define __ARCH_BOARD_BOARD_H - -/************************************************************ - * Included Files - ************************************************************/ - -/************************************************************ - * Definitions - ************************************************************/ - -/************************************************************ - * Inline Functions - ************************************************************/ - -#endif /* __ARCH_BOARD_BOARD_H */ diff --git a/nuttx/configs/pjrc-8051/include/pjrc.h b/nuttx/configs/pjrc-8051/include/pjrc.h deleted file mode 100644 index 9d0d9482a..000000000 --- a/nuttx/configs/pjrc-8051/include/pjrc.h +++ /dev/null @@ -1,215 +0,0 @@ -/************************************************************************** - * pjrc.h - * - * Copyright (C) 2007, 2009 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name Gregory Nutt nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - **************************************************************************/ - -#ifndef __PJRC_H -#define __PJRC_H - -/************************************************************************** - * Included Files - **************************************************************************/ - -#include <stdint.h> - -/************************************************************************** - * Public Definitions - **************************************************************************/ - -/************************************************************************** - * Public Types - **************************************************************************/ - -/************************************************************************** - * Public Variables - **************************************************************************/ - -/* Memory Map - * - * BEGIN END DESCRIPTION - * 0x0000 0x1fff CODE: ROM containg PAULMON2 - * DATA: RAM for program variables - * 0x2000 0x7fff COMMON: RAM for program code or - * variables - * 0x8000 0xf7ff COMMON: FLASH for program code - * 0xf800 0xfeff COMMON: Peripherals - * 0xff00 0xffff COMMON: unused - * - * Program code may be loaded at the RAM location 0x2000-0x7fff - * for testing. If loaded into the FLASH location at - * 0x8000-0xf7ff, PAULMON2 will automatically write the program - * into flash. The program is configured in the RAM-based test - * configuration: - */ - -#define RAM_BLOCK_START IRAM_SIZE -#define RAM_BLOCK_END 0x1fff - -#define PROGRAM_BASE 0x2000 -#define PROGRAM_END 0x7fff - -#define FLASH_BASE 0x8000 -#define FLASH_END 0xf7ff - -/* Well-known entry points to access PAULMON2's built-in functions */ - -#define PM2_ENTRY_PHEX1 0x002e -#define PM2_ENTRY_COUT 0x0030 -#define PM2_ENTRY_CIN 0x0032 -#define PM2_ENTRY_PHEX 0x0034 -#define PM2_ENTRY_PHEX16 0x0036 -#define PM2_ENTRY_PSTR 0x0038 -#define PM2_ENTRY_ESC 0x003e -#define PM2_ENTRY_UPPER 0x0040 -#define PM2_ENTRY_PINT8U 0x004D -#define PM2_ENTRY_PINT8 0x0050 -#define PM2_ENTRY_PINT16U 0x0053 -#define PM2_ENTRY_NEWLINE 0x0048 -#define PM2_ENTRY_PRGM 0x0059 -#define PM2_ENTRY_ERBLOCK 0x0067 - -/* PAULMON2 captures all interrupt vectors in ROM but relays them - * through the following RAM addresses: - */ - -#define PM2_VECTOR_BASE PROGRAM_BASE -#define PM2_VECTOR_EXTINT0 (PM2_VECTOR_BASE + 3) -#define PM2_VECTOR_TIMER0 (PM2_VECTOR_BASE + 11) -#define PM2_VECTOR_EXTINT1 (PM2_VECTOR_BASE + 19) -#define PM2_VECTOR_TIMER1 (PM2_VECTOR_BASE + 27) -#define PM2_VECTOR_UART (PM2_VECTOR_BASE + 35) -#define PM2_VECTOR_TIMER2 (PM2_VECTOR_BASE + 43) - -/* Peripheral Mapping - * - * Begin End Peripheral Addr Acc Function - * F800 F8FF 82C55 (A, B, C) F800 R/W Port A - * F801 R/W Port B - * F802 R/W Port C - * F803 W Config A,B,C - * F900 F9FF 82C55 (D, E, F) F900 R/W Port D - * F901 R/W Port E (LEDs) - * F902 R/W Port F - * F903 W Config D,E,F - * FA00 FAFF User Expansion - * FB00 FBFF User Expansion - * FC00 FCFF User Expansion - * FD00 FDFF User Expansion - * FE00 FEFF LCD Port FE00 W Command Register - * FE01 R Status Register - * FE02 W Display or CGRAM Buffer - * FE03 R " " "" " " " " - * - * These are the memory-mapped locations used to access the two 82C55 - * chips - */ - -#ifndef __ASSEMBLY__ -xdata at 0xF800 uint8_t p82c55_port_a; -xdata at 0xF801 uint8_t p82c55_port_b; -xdata at 0xF802 uint8_t p82c55_port_c; -xdata at 0xF803 uint8_t p82c55_abc_config; -xdata at 0xF900 uint8_t p82c55_port_d; -xdata at 0xF901 uint8_t p82c55_port_e; -xdata at 0xF902 uint8_t p82c55_port_f; -xdata at 0xF903 uint8_t p82c55_def_config; -#endif - -/* LED (Port E) bit definitions */ - -#define LED_STARTED 0 -#define LED_HEAPALLOCATE 1 -#define LED_IRQSENABLED 2 -#define LED_IDLE 3 -#define LED_UNUSED2 4 -#define LED_INIRQ 5 -#define LED_ASSERTION 6 -#define LED_PANIC 7 - -/* Registers. 8052 regiser definitions are provided in the SDCC header - * file 8052.h. However, a few SFR registers are missing from that - * file (they can be found in mcs51reg.h, but that file is too much - * when the following simple addtions do the job). - */ - -#ifndef __ASSEMBLY__ -sfr at 0xc9 T2MOD ; -#endif - -/* Timing information. - * - * The PJRC board is based on a standard 87C52 CPU clocked at 22.1184 MHz. - * The CPU clock is divided by 12 to yield a clock frequency of 1.8432 MHz. - */ - -#define CPU_CLOCK_HZ 22118400L -#define TIMER_CLOCK_HZ 1843200L - -/* The 87C52 has three timers, timer 0, timer 1, and timer 2. On the PJRC - * board, timer 1 and 2 have dedicated functions. They provide baud support - * support for the boards two serial ports. Unfortunately, only timer 2 - * can generate the accurate 100Hz timer desired by the OS. - * - * Timer 0 provides only a 8-bit auto-reload mode. - */ - -#ifdef CONFIG_8052_TIMER2 - -/* To use timer 2 as the 100Hz system timer, we need to calculate a 16-bit - * reload value that results in 100Hz overflow interrupts. That value - * is given by: - * - * Timer ticks = TIMER_CLOCK_HZ / (desired ticks-per-second) - * = 18432 - * Capture value = 0xffff - (Timer ticks) - * = 47103 = 0x67ff - */ - -# define TIMER2_CAPTURE_LOW 0xff -# define TIMER2_CAPTURE_HIGH 0x67 - -#else - -/* Timer 0, mode 0 can be used as a system timer. In that mode, the - * 1.8432 is further divided by 32. A single 8-bit value is incremented - * at 57600 Hz, which results in 225 Timer 0 overflow interrupts per - * second. - */ - -#endif - -/************************************************************************** - * Public Function Prototypes - **************************************************************************/ - -#endif /* __PJRC_H */ diff --git a/nuttx/configs/pjrc-8051/sdcc-2.6.0.patch b/nuttx/configs/pjrc-8051/sdcc-2.6.0.patch deleted file mode 100644 index beb8bf2ea..000000000 --- a/nuttx/configs/pjrc-8051/sdcc-2.6.0.patch +++ /dev/null @@ -1,28 +0,0 @@ -diff -u sdcc/device/lib/Makefile.orig sdcc/device/lib/Makefile ---- sdcc/device/lib/Makefile.orig 2007-03-06 09:55:01.000000000 -0600 -+++ sdcc/device/lib/Makefile 2007-03-06 09:58:32.000000000 -0600 -@@ -242,7 +242,7 @@ - model-mcs51-stack-auto: - if [ "`grep mcs51 $(top_builddir)ports.build`" = mcs51 ]; then \ - for model in $(MODELS); do \ -- $(MAKE) MODELFLAGS="--model-$$model --stack-auto" PORT=$$model PORTDIR=$(BUILDDIR)/$$model-stack-auto PORTINCDIR=$(INCDIR)/mcs51 objects; \ -+ $(MAKE) MODELFLAGS="--model-$$model --stack-auto --int-long-reent --float-reent" PORT=$$model PORTDIR=$(BUILDDIR)/$$model-stack-auto PORTINCDIR=$(INCDIR)/mcs51 objects; \ - done \ - fi - -diff -u sdcc/device/include/stdarg.h.orig sdcc/device/include/stdarg.h ---- sdcc/device/include/stdarg.h.orig 2007-03-11 13:21:15.000000000 -0600 -+++ sdcc/device/include/stdarg.h 2007-03-11 13:26:59.000000000 -0600 -@@ -25,9 +25,9 @@ - - #else - --typedef unsigned char __data * va_list ; --#define va_arg(marker,type) *((type __data * )(marker -= sizeof(type))) --#define va_start(marker,first) { marker = (va_list) ((char __data * )&first); } -+typedef unsigned char * va_list ; -+#define va_arg(marker,type) *((type * )(marker -= sizeof(type))) -+#define va_start(marker,first) { marker = (va_list) ((char * )&first); } - - #endif - diff --git a/nuttx/configs/pjrc-8051/setenv.sh b/nuttx/configs/pjrc-8051/setenv.sh deleted file mode 100755 index 621bb27b1..000000000 --- a/nuttx/configs/pjrc-8051/setenv.sh +++ /dev/null @@ -1,65 +0,0 @@ -#!/bin/bash -# configs/pjrc-8051/setenv.sh -# -# Copyright (C) 2007-2008, 2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# - -if [ "$_" = "$0" ] ; then - echo "You must source this script, not run it!" 1>&2 - exit 1 -fi - -WD=`pwd` -if [ ! -x "setenv.sh" ]; then - echo "This script must be executed from the top-level NuttX build directory" - exit 1 -fi - -if [ -z "${PATH_ORIG}" ]; then - export PATH_ORIG="${PATH}" -fi - -# -# This is the normal installation directory for SDCC under Linux, OSX -# or Linux: -# -export TOOLCHAIN_BIN=/usr/local/bin - -# -# This is the normal installation directory for SDCC under Windows -# -#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/SDCC/bin" - -# -# Add the path to the toolchain to the PATH varialble -# -export PATH="${TOOLCHAIN_BIN}":/sbin:/usr/sbin:${PATH_ORIG} -echo "PATH : ${PATH}" diff --git a/nuttx/configs/pjrc-8051/src/.gitignore b/nuttx/configs/pjrc-8051/src/.gitignore deleted file mode 100644 index 04b280c8b..000000000 --- a/nuttx/configs/pjrc-8051/src/.gitignore +++ /dev/null @@ -1,15 +0,0 @@ -/Make.dep -/.depend -/up_mem.h -/*.sym -/*.asm -/*.rel -/*.lst -/*.adb -/*.rst -/*.lib -/*.lnk -/*.map -/*.mem -/*.ihx -/*.hex diff --git a/nuttx/configs/pjrc-8051/src/Makefile b/nuttx/configs/pjrc-8051/src/Makefile deleted file mode 100644 index 0983153b0..000000000 --- a/nuttx/configs/pjrc-8051/src/Makefile +++ /dev/null @@ -1,75 +0,0 @@ -############################################################################ -# configs/pjrc-8051/src/Makefile -# -# Copyright (C) 2007, 2008, 2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - --include $(TOPDIR)/Make.defs - -CFLAGS += -I$(TOPDIR)/sched - -ASRCS = -AOBJS = $(ASRCS:.S=$(OBJEXT)) -CSRCS = up_leds.c -COBJS = $(CSRCS:.c=$(OBJEXT)) - -SRCS = $(ASRCS) $(CSRCS) -OBJS = $(AOBJS) $(COBJS) - -CFLAGS += -I $(TOPDIR)/arch/$(CONFIG_ARCH)/src - -all: libboard$(LIBEXT) - -$(AOBJS): %$(OBJEXT): %.S - $(call ASSEMBLE, $<, $@) - -$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c - $(call COMPILE, $<, $@) - -libboard$(LIBEXT): $(OBJS) - $(call ARCHIVE, $@, $(OBJS)) - -.depend: Makefile $(SRCS) - $(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep - $(Q) touch $@ - -depend: .depend - -clean: - $(call DELFILE, libboard$(LIBEXT)) - $(call CLEAN) - -distclean: clean - $(call DELFILE, Make.dep) - $(call DELFILE, .depend) - --include Make.dep diff --git a/nuttx/configs/pjrc-8051/src/up_leds.c b/nuttx/configs/pjrc-8051/src/up_leds.c deleted file mode 100644 index f2020b540..000000000 --- a/nuttx/configs/pjrc-8051/src/up_leds.c +++ /dev/null @@ -1,207 +0,0 @@ -/************************************************************************ - * up_leds.c - * - * Copyright (C) 2007, 2009, 2013 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name Gregory Nutt nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************/ - -/************************************************************************ - * Included Files - ************************************************************************/ - -#include <nuttx/config.h> -#include <stdint.h> -#include "up_internal.h" - -/************************************************************************ - * Definitions - ************************************************************************/ - -#define RESET_KLUDGE_NEEDED 1 - -/************************************************************************ - * Private Data - ************************************************************************/ - -static uint8_t g_ledstate; - -/************************************************************************ - * Private Functions - ************************************************************************/ - -#if defined(CONFIG_DEBUG_LEDS) && defined(CONFIG_ARCH_LEDS) -static void _up_puthex(uint8_t hex) __naked -{ - hex; /* To avoid unreferenced argument warning */ - _asm - mov a, dpl - ljmp PM2_ENTRY_PHEX - _endasm; -} - -static void _up_putch(uint8_t ch) __naked -{ - _asm - mov a, dpl - ljmp PM2_ENTRY_COUT - _endasm; -} - -static void _up_putnl(void) __naked -{ - _asm - ljmp PM2_ENTRY_NEWLINE - _endasm; -} - -# define _up_showledinit() \ - _up_putch('I'); \ - _up_puthex(g_ledstate); _up_putch(':'); \ - _up_puthex(p82c55_port_e); _up_putnl(); - -# define _up_showledreset() \ - _up_putch('R'); \ - _up_puthex(led); _up_putch(':'); \ - _up_puthex(g_ledstate); _up_putch(':'); \ - _up_puthex(p82c55_port_e); _up_putnl(); - -# define _up_showledon() \ - _up_putch('+'); \ - _up_puthex(led); _up_putch(':'); \ - _up_puthex(g_ledstate); _up_putch(':'); \ - _up_puthex(p82c55_port_e); _up_putnl(); - -# define _up_showledoff() \ - _up_putch('-'); \ - _up_puthex(led); _up_putch(':'); \ - _up_puthex(g_ledstate); _up_putch(':'); \ - _up_puthex(p82c55_port_e); _up_putnl(); - -#else - -# define _up_showledinit() -# define _up_showledreset() -# define _up_showledon() -# define _up_showledoff() - -#endif - -/************************************************************************ - * Public Funtions - ************************************************************************/ - -/************************************************************************ - * Name: board_led_initialize - ************************************************************************/ - -#ifdef CONFIG_ARCH_LEDS -void board_led_initialize(void) -{ - /* Set all ports as outputs */ - - p82c55_def_config = 128; - - /* Turn LED 1-7 off; turn LED 0 on */ - - g_ledstate = 0xfe; - p82c55_port_e = g_ledstate; - - _up_showledinit(); -} - -/************************************************************************ - * Name: board_led_on - ************************************************************************/ - -void board_led_on(uint8_t led) -{ - /* This may be called from an interrupt handler */ - - irqstate_t flags = irqsave(); - -#ifdef RESET_KLUDGE_NEEDED - /* I don't understand why this happens yet, but sometimes - * it is necessary to reconfigure port E. - */ - - if (g_ledstate != p82c55_port_e) - { - _up_showledreset(); - p82c55_def_config = 128; - } -#endif - - /* Clear the bit in port E corresponding to LED to turn it on */ - - if (led < 8) - { - g_ledstate &= ~(g_ntobit[led]); - p82c55_port_e = g_ledstate; - } - - _up_showledon(); - irqrestore(flags); -} - -/************************************************************************ - * Name: board_led_off - ************************************************************************/ - -void board_led_off(uint8_t led) -{ - /* This may be called from an interrupt handler */ - - irqstate_t flags = irqsave(); - -#ifdef RESET_KLUDGE_NEEDED - /* I don't understand why this happens yet, but sometimes - * it is necessary to reconfigure port E. - */ - - if (g_ledstate != p82c55_port_e) - { - _up_showledreset(); - p82c55_def_config = 128; - } -#endif - - /* Set the bit in port E corresponding to LED to turn it off */ - - if (led < 8) - { - g_ledstate |= g_ntobit[led]; - p82c55_port_e = g_ledstate; - } - - _up_showledoff(); - irqrestore(flags); -} -#endif /* CONFIG_ARCH_LEDS */ |