diff options
Diffstat (limited to 'nuttx/configs')
-rw-r--r-- | nuttx/configs/README.txt | 4 | ||||
-rw-r--r-- | nuttx/configs/c5471evm/README.txt | 72 | ||||
-rw-r--r-- | nuttx/configs/c5471evm/defconfig | 5 | ||||
-rw-r--r-- | nuttx/configs/c5471evm/dhcpconfig | 5 | ||||
-rw-r--r-- | nuttx/configs/c5471evm/netconfig | 5 | ||||
-rw-r--r-- | nuttx/configs/c5471evm/nshconfig | 5 | ||||
-rw-r--r-- | nuttx/configs/mcu123-lpc214x/README.txt | 96 | ||||
-rw-r--r-- | nuttx/configs/mcu123-lpc214x/nsh/defconfig | 5 | ||||
-rw-r--r-- | nuttx/configs/mcu123-lpc214x/ostest/defconfig | 5 | ||||
-rw-r--r-- | nuttx/configs/ntosd-dm320/README.txt | 77 | ||||
-rw-r--r-- | nuttx/configs/ntosd-dm320/nettest/defconfig | 5 | ||||
-rw-r--r-- | nuttx/configs/ntosd-dm320/nsh/defconfig | 5 | ||||
-rw-r--r-- | nuttx/configs/ntosd-dm320/ostest/defconfig | 5 | ||||
-rw-r--r-- | nuttx/configs/ntosd-dm320/udp/defconfig | 5 | ||||
-rw-r--r-- | nuttx/configs/ntosd-dm320/uip/defconfig | 5 |
15 files changed, 302 insertions, 2 deletions
diff --git a/nuttx/configs/README.txt b/nuttx/configs/README.txt index ca3f44fa7..c7f557d65 100644 --- a/nuttx/configs/README.txt +++ b/nuttx/configs/README.txt @@ -124,8 +124,8 @@ defconfig -- This is a configuration file similar to the Linux CONFIG_ARCH_BOARD - Identifies the configs subdirectory and hence, the board that supports the particular chip or SoC. CONFIG_ARCH_BOARD_name - For use in C code - CONFIG_ENDIAN_BIG - define if big endian (default is little - endian) + CONFIG_ENDIAN_BIG - define if big endian (default is little + endian) Some architectures require a description of the RAM configuration: diff --git a/nuttx/configs/c5471evm/README.txt b/nuttx/configs/c5471evm/README.txt index f516f24a7..fd276ed05 100644 --- a/nuttx/configs/c5471evm/README.txt +++ b/nuttx/configs/c5471evm/README.txt @@ -1,6 +1,78 @@ README ^^^^^^ +ARM/C5471-specific Configuration Options +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + CONFIG_ARCH - Identifies the arch/ subdirectory. This should + be set to: + + CONFIG_ARCH=arm + + CONFIG_ARCH_name - For use in C code: + + CONFIG_ARCH_ARM=y + + CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory + + CONFIG_ARCH_CHIP=c5471 + + CONFIG_ARCH_CHIP_name - For use in C code + + CONFIG_ARCH_CHIP_C5471 + + CONFIG_ARCH_BOARD - Identifies the configs subdirectory and + hence, the board that supports the particular chip or SoC. + + CONFIG_ARCH_BOARD=c5471evm (for the Spectrum Digital C5471 EVM) + + CONFIG_ARCH_BOARD_name - For use in C code + + CONFIG_ARCH_BOARD_C5471EVM (for the Spectrum Digital C5471 EVM) + + CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation + of delay loops + + CONFIG_ENDIAN_BIG - define if big endian (default is little + endian) + + CONFIG_ROM_VECTORS - should be defined for the C5471 because the + interrupt vectors are in ROM + + CONFIG_DRAM_END - the size of installed DRAM. Unique to c5471 + + CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that + have LEDs + + CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt + stack. If defined, this symbol is the size of the interrupt + stack in bytes. If not defined, the user task stacks will be + used during interrupt handling. + + CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions + + C5471 specific device driver settings + + CONFIG_SERIAL_IRDA_CONSOLE - selects the IRDA UART for the + console ant ttys0 (default is the modem UART). + CONFIG_UART_*_HWFLOWCONTROL - enables hardware flow control + CONFIG_UART_*_RXBUFSIZE - Characters are buffered as received. + This specific the size of the receive buffer + CONFIG_UART_*_TXBUFSIZE - Characters are buffered before + being sent. This specific the size of the transmit buffer + CONFIG_UART_*_BAUD - The configure BAUD of the UART. Must be + CONFIG_UART_*_BITS - The number of bits. Must be either 7 or 8. + CONFIG_UART_*_PARTIY - 0=no parity, 1=odd parity, 2=even parity + CONFIG_UART_*_2STOP - Two stop bits + + C5471 Ethernet Driver settings + + CONFIG_C5471_NET_STATS + CONFIG_C5471_ETHERNET_PHY={ETHERNET_PHY_LU3X31T_T64,ETHERNET_PHY_AC101L} + CONFIG_NET_C5471_AUTONEGOTIATION + CONFIG_NET_C5471_BASET100 + CONFIG_NET_C5471_BASET10 + defconfig ^^^^^^^^^ The default configuration file, defconfig, performs a diff --git a/nuttx/configs/c5471evm/defconfig b/nuttx/configs/c5471evm/defconfig index 626e7fc8b..d0a4f82f5 100644 --- a/nuttx/configs/c5471evm/defconfig +++ b/nuttx/configs/c5471evm/defconfig @@ -51,6 +51,10 @@ # CONFIG_DRAM_END - the size of installed DRAM. # Unique to c5471 # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to c5471. +# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt +# stack. If defined, this symbol is the size of the interrupt +# stack in bytes. If not defined, the user task stacks will be +# used during interrupt handling. # CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions # CONFIG_ARCH=arm @@ -63,6 +67,7 @@ CONFIG_BOARD_LOOPSPERMSEC=1250 CONFIG_ROM_VECTORS=n CONFIG_DRAM_END=0x11000000 CONFIG_ARCH_LEDS=y +CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=y # diff --git a/nuttx/configs/c5471evm/dhcpconfig b/nuttx/configs/c5471evm/dhcpconfig index cbcea2f62..5b3a0e665 100644 --- a/nuttx/configs/c5471evm/dhcpconfig +++ b/nuttx/configs/c5471evm/dhcpconfig @@ -51,6 +51,10 @@ # CONFIG_DRAM_END - the size of installed DRAM. # Unique to c5471 # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to c5471. +# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt +# stack. If defined, this symbol is the size of the interrupt +# stack in bytes. If not defined, the user task stacks will be +# used during interrupt handling. # CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions # CONFIG_ARCH=arm @@ -63,6 +67,7 @@ CONFIG_BOARD_LOOPSPERMSEC=1250 CONFIG_ROM_VECTORS=n CONFIG_DRAM_END=0x11000000 CONFIG_ARCH_LEDS=y +CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=y # diff --git a/nuttx/configs/c5471evm/netconfig b/nuttx/configs/c5471evm/netconfig index 109cd7279..e85364d7b 100644 --- a/nuttx/configs/c5471evm/netconfig +++ b/nuttx/configs/c5471evm/netconfig @@ -51,6 +51,10 @@ # CONFIG_DRAM_END - the size of installed DRAM. # Unique to c5471 # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to c5471. +# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt +# stack. If defined, this symbol is the size of the interrupt +# stack in bytes. If not defined, the user task stacks will be +# used during interrupt handling. # CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions # CONFIG_ARCH=arm @@ -63,6 +67,7 @@ CONFIG_BOARD_LOOPSPERMSEC=1250 CONFIG_ROM_VECTORS=n CONFIG_DRAM_END=0x11000000 CONFIG_ARCH_LEDS=y +CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=y # diff --git a/nuttx/configs/c5471evm/nshconfig b/nuttx/configs/c5471evm/nshconfig index 206438f17..a45f91fb7 100644 --- a/nuttx/configs/c5471evm/nshconfig +++ b/nuttx/configs/c5471evm/nshconfig @@ -51,6 +51,10 @@ # CONFIG_DRAM_END - the size of installed DRAM. # Unique to c5471 # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to c5471. +# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt +# stack. If defined, this symbol is the size of the interrupt +# stack in bytes. If not defined, the user task stacks will be +# used during interrupt handling. # CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions # CONFIG_ARCH=arm @@ -63,6 +67,7 @@ CONFIG_BOARD_LOOPSPERMSEC=1250 CONFIG_ROM_VECTORS=n CONFIG_DRAM_END=0x11000000 CONFIG_ARCH_LEDS=y +CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=y # diff --git a/nuttx/configs/mcu123-lpc214x/README.txt b/nuttx/configs/mcu123-lpc214x/README.txt index bab1758ee..16456266e 100644 --- a/nuttx/configs/mcu123-lpc214x/README.txt +++ b/nuttx/configs/mcu123-lpc214x/README.txt @@ -15,6 +15,102 @@ For example, the path to the built lpc21isp binary will most likely have to have change. Then move this script to the top level NuttX directory and simply execute it to load NuttX onto the board. +ARM/LPC214X-specific Configuration Options +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + CONFIG_ARCH - Identifies the arch/ subdirectory. This should + be set to: + + CONFIG_ARCH=arm + + CONFIG_ARCH_name - For use in C code: + + CONFIG_ARCH_ARM=y + + CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory + + CONFIG_ARCH_CHIP=c5471 + + CONFIG_ARCH_CHIP_name - For use in C code + + CONFIG_ARCH_CHIP_C5471 + + CONFIG_ARCH_BOARD - Identifies the configs subdirectory and + hence, the board that supports the particular chip or SoC. + + CONFIG_ARCH_BOARD=c5471evm (for the Spectrum Digital C5471 EVM) + + CONFIG_ARCH_BOARD_name - For use in C code + + CONFIG_ARCH_BOARD_C5471EVM (for the Spectrum Digital C5471 EVM) + + CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation + of delay loops + + CONFIG_ENDIAN_BIG - define if big endian (default is little + endian) + + CONFIG_DRAM_SIZE - Describes the installed DRAM. + + CONFIG_DRAM_START - The start address of installed DRAM + + CONFIG_DRAM_END - Should be (CONFIG_DRAM_START+CONFIG_DRAM_SIZE) + + CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that + have LEDs + + CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt + stack. If defined, this symbol is the size of the interrupt + stack in bytes. If not defined, the user task stacks will be + used during interrupt handling. + + CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions + + LPC2148 specific chip initialization + + CONFIG_EXTMEM_MODE, CONFIG_RAM_MODE, CONFIG_CODE_BASE, CONFIG_PLL_SETUP, + CONFIG_MAM_SETUP, CONFIG_APBDIV_SETUP, CONFIG_EMC_SETUP, CONFIG_BCFG0_SETUP, + CONFIG_BCFG1_SETUP, CONFIG_BCFG2_SETUP, CONFIG_BCFG3_SETUP, CONFIG_ADC_SETUP + + LPC214X specific device driver settings + + CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the + console and ttys0 (default is the UART0). + + CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. + This specific the size of the receive buffer + + CONFIG_UARTn_TXBUFSIZE - Characters are buffered before + being sent. This specific the size of the transmit buffer + + CONFIG_UARTn_BAUD - The configure BAUD of the UART. + + CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8. + + CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity, 3=mark 1, 4=space 0 + + CONFIG_UARTn_2STOP - Two stop bits + + LPC214X USB Configuration + + CONFIG_LPC214X_USBDEV_FRAME_INTERRUPT + Handle USB Start-Of-Frame events. + Enable reading SOF from interrupt handler vs. simply reading on demand. + Probably a bad idea... Unless there is some issue with sampling the SOF + from hardware asynchronously. + + CONFIG_LPC214X_USBDEV_EPFAST_INTERRUPT + Enable high priority interrupts. I have no idea why you might want to + do that + + CONFIG_LPC214X_USBDEV_NDMADESCRIPTORS + Number of DMA descriptors to allocate in the 8Kb USB RAM. This is a + tradeoff between the number of DMA channels that can be supported vs + the size of the DMA buffers available. + + CONFIG_LPC214X_USBDEV_DMA + Enable lpc214x-specific DMA support + Configurations ^^^^^^^^^^^^^^ diff --git a/nuttx/configs/mcu123-lpc214x/nsh/defconfig b/nuttx/configs/mcu123-lpc214x/nsh/defconfig index 3dec91a3a..cf194adf1 100644 --- a/nuttx/configs/mcu123-lpc214x/nsh/defconfig +++ b/nuttx/configs/mcu123-lpc214x/nsh/defconfig @@ -50,6 +50,10 @@ # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to lpc2148. # CONFIG_DRAM_SIZE - Describes the internal DRAM. # CONFIG_DRAM_START - The start address of internal DRAM +# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt +# stack. If defined, this symbol is the size of the interrupt +# stack in bytes. If not defined, the user task stacks will be +# used during interrupt handling. # CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions # CONFIG_ARCH=arm @@ -62,6 +66,7 @@ CONFIG_ARCH_LEDS=y CONFIG_DRAM_SIZE=0x00008000 CONFIG_DRAM_START=0x40000000 CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) +CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=y # diff --git a/nuttx/configs/mcu123-lpc214x/ostest/defconfig b/nuttx/configs/mcu123-lpc214x/ostest/defconfig index 4a1e38193..fdbabd3ed 100644 --- a/nuttx/configs/mcu123-lpc214x/ostest/defconfig +++ b/nuttx/configs/mcu123-lpc214x/ostest/defconfig @@ -50,6 +50,10 @@ # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to lpc2148. # CONFIG_DRAM_SIZE - Describes the internal DRAM. # CONFIG_DRAM_START - The start address of internal DRAM +# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt +# stack. If defined, this symbol is the size of the interrupt +# stack in bytes. If not defined, the user task stacks will be +# used during interrupt handling. # CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions # CONFIG_ARCH=arm @@ -62,6 +66,7 @@ CONFIG_ARCH_LEDS=y CONFIG_DRAM_SIZE=0x00008000 CONFIG_DRAM_START=0x40000000 CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) +CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=y # diff --git a/nuttx/configs/ntosd-dm320/README.txt b/nuttx/configs/ntosd-dm320/README.txt index 03111148b..6e620f3d6 100644 --- a/nuttx/configs/ntosd-dm320/README.txt +++ b/nuttx/configs/ntosd-dm320/README.txt @@ -1,6 +1,83 @@ README ^^^^^^ +ARM/DM320-specific Configuration Options +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + CONFIG_ARCH - Identifies the arch/ subdirectory. This should + be set to: + + CONFIG_ARCH=arm + + CONFIG_ARCH_name - For use in C code: + + CONFIG_ARCH_ARM=y + + CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory + + CONFIG_ARCH_CHIP=c5471 + + CONFIG_ARCH_CHIP_name - For use in C code + + CONFIG_ARCH_CHIP_C5471 + + CONFIG_ARCH_BOARD - Identifies the configs subdirectory and + hence, the board that supports the particular chip or SoC. + + CONFIG_ARCH_BOARD=c5471evm (for the Spectrum Digital C5471 EVM) + + CONFIG_ARCH_BOARD_name - For use in C code + + CONFIG_ARCH_BOARD_C5471EVM (for the Spectrum Digital C5471 EVM) + + CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation + of delay loops + + CONFIG_ENDIAN_BIG - define if big endian (default is little + endian) + + CONFIG_DRAM_SIZE - Describes the installed DRAM. + + CONFIG_DRAM_START - The start address of installed DRAM + + CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual) + + CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that + have LEDs + + CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt + stack. If defined, this symbol is the size of the interrupt + stack in bytes. If not defined, the user task stacks will be + used during interrupt handling. + + CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions + + DM320 specific device driver settings + + CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the + console and ttys0 (default is the UART0). + CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. + This specific the size of the receive buffer + CONFIG_UARTn_TXBUFSIZE - Characters are buffered before + being sent. This specific the size of the transmit buffer + CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be + CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8. + CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity + CONFIG_UARTn_2STOP - Two stop bits + + DM320 USB Configuration + + CONFIG_DM320_GIO_USBATTACH + GIO that detects USB attach/detach events + CONFIG_DM320_GIO_USBDPPULLUP + GIO + CONFIG_DMA320_USBDEV_DMA + Enable DM320-specific DMA support + CONFIG_DM320_GIO_USBATTACH=6 + +Configurations +^^^^^^^^^^^^^^ + Each Neuros OSD configuration is maintained in a sudirectory and can be selected as follow: diff --git a/nuttx/configs/ntosd-dm320/nettest/defconfig b/nuttx/configs/ntosd-dm320/nettest/defconfig index 491e7a8a8..a17635949 100644 --- a/nuttx/configs/ntosd-dm320/nettest/defconfig +++ b/nuttx/configs/ntosd-dm320/nettest/defconfig @@ -50,6 +50,10 @@ # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) # CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual) +# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt +# stack. If defined, this symbol is the size of the interrupt +# stack in bytes. If not defined, the user task stacks will be +# used during interrupt handling. # CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions # CONFIG_ARCH=arm @@ -63,6 +67,7 @@ CONFIG_DRAM_SIZE=0x01000000 CONFIG_DRAM_START=0x01000000 CONFIG_DRAM_VSTART=0x00000000 CONFIG_DRAM_NUTTXENTRY=0x01008000 +CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=n # diff --git a/nuttx/configs/ntosd-dm320/nsh/defconfig b/nuttx/configs/ntosd-dm320/nsh/defconfig index 0b2486383..4fb6c47bb 100644 --- a/nuttx/configs/ntosd-dm320/nsh/defconfig +++ b/nuttx/configs/ntosd-dm320/nsh/defconfig @@ -50,6 +50,10 @@ # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) # CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual) +# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt +# stack. If defined, this symbol is the size of the interrupt +# stack in bytes. If not defined, the user task stacks will be +# used during interrupt handling. # CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions # CONFIG_ARCH=arm @@ -63,6 +67,7 @@ CONFIG_DRAM_SIZE=0x01000000 CONFIG_DRAM_START=0x01000000 CONFIG_DRAM_VSTART=0x00000000 CONFIG_DRAM_NUTTXENTRY=0x01008000 +CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=n # diff --git a/nuttx/configs/ntosd-dm320/ostest/defconfig b/nuttx/configs/ntosd-dm320/ostest/defconfig index 54d71af12..a8ac562d8 100644 --- a/nuttx/configs/ntosd-dm320/ostest/defconfig +++ b/nuttx/configs/ntosd-dm320/ostest/defconfig @@ -50,6 +50,10 @@ # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) # CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual) +# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt +# stack. If defined, this symbol is the size of the interrupt +# stack in bytes. If not defined, the user task stacks will be +# used during interrupt handling. # CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions # CONFIG_ARCH=arm @@ -63,6 +67,7 @@ CONFIG_DRAM_SIZE=0x01000000 CONFIG_DRAM_START=0x01000000 CONFIG_DRAM_VSTART=0x00000000 CONFIG_DRAM_NUTTXENTRY=0x01008000 +CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=y # diff --git a/nuttx/configs/ntosd-dm320/udp/defconfig b/nuttx/configs/ntosd-dm320/udp/defconfig index b3c0633f9..d4c02d7ec 100644 --- a/nuttx/configs/ntosd-dm320/udp/defconfig +++ b/nuttx/configs/ntosd-dm320/udp/defconfig @@ -50,6 +50,10 @@ # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) # CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual) +# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt +# stack. If defined, this symbol is the size of the interrupt +# stack in bytes. If not defined, the user task stacks will be +# used during interrupt handling. # CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions # CONFIG_ARCH=arm @@ -63,6 +67,7 @@ CONFIG_DRAM_SIZE=0x01000000 CONFIG_DRAM_START=0x01000000 CONFIG_DRAM_VSTART=0x00000000 CONFIG_DRAM_NUTTXENTRY=0x01008000 +CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=n # diff --git a/nuttx/configs/ntosd-dm320/uip/defconfig b/nuttx/configs/ntosd-dm320/uip/defconfig index ace6d935a..9f19366e8 100644 --- a/nuttx/configs/ntosd-dm320/uip/defconfig +++ b/nuttx/configs/ntosd-dm320/uip/defconfig @@ -50,6 +50,10 @@ # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) # CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual) +# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt +# stack. If defined, this symbol is the size of the interrupt +# stack in bytes. If not defined, the user task stacks will be +# used during interrupt handling. # CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions # CONFIG_ARCH=arm @@ -63,6 +67,7 @@ CONFIG_DRAM_SIZE=0x01000000 CONFIG_DRAM_START=0x01000000 CONFIG_DRAM_VSTART=0x00000000 CONFIG_DRAM_NUTTXENTRY=0x01008000 +CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=n # |