summaryrefslogtreecommitdiff
path: root/nuttx/drivers/lcd/ug-2864ambag01.c
diff options
context:
space:
mode:
Diffstat (limited to 'nuttx/drivers/lcd/ug-2864ambag01.c')
-rw-r--r--nuttx/drivers/lcd/ug-2864ambag01.c69
1 files changed, 22 insertions, 47 deletions
diff --git a/nuttx/drivers/lcd/ug-2864ambag01.c b/nuttx/drivers/lcd/ug-2864ambag01.c
index ff538ac82..3b418bf05 100644
--- a/nuttx/drivers/lcd/ug-2864ambag01.c
+++ b/nuttx/drivers/lcd/ug-2864ambag01.c
@@ -1,6 +1,7 @@
/**************************************************************************************
* drivers/lcd/ug-2864ambag01.c
- * Driver for Univision UG-2864AMBAG01 OLED display (wih SH1101A controller)
+ * Driver for Univision UG-2864AMBAG01 OLED display (wih SH1101A controller) in SPI
+ * mode
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
@@ -146,11 +147,6 @@
# define CONFIG_UG2864AMBAG01_NINTERFACES 1
#endif
-#ifndef CONFIG_UG2864AMBAG01_FRAMEBUFFER
-# warning "CONFIG_UG2864AMBAG01_FRAMEBUFFER is required"
-# define CONFIG_UG2864AMBAG01_FRAMEBUFFER 1
-#endif
-
#if defined(CONFIG_LCD_PORTRAIT) || defined(CONFIG_LCD_RPORTRAIT)
# warning "No support yet for portrait modes"
# define CONFIG_LCD_LANDSCAPE 1
@@ -206,19 +202,6 @@
#define SH1101A_STATUS_ONOFF (0x40)
#define SH1101A_RDDATA(d) (d) /* Read Display Data */
-/* Define the CONFIG_DEBUG_LCD to enable detailed debug output (stuff you would
- * never want to see unless you are debugging this file). Verbose debug must also be
- * enabled
- */
-
-#ifndef CONFIG_DEBUG
-# undef CONFIG_DEBUG_VERBOSE
-#endif
-
-#ifndef CONFIG_DEBUG_VERBOSE
-# undef CONFIG_DEBUG_LCD
-#endif
-
/* Color Properties *******************************************************************/
/* Display Resolution
*
@@ -259,8 +242,8 @@
* Row size: 128 columns x 8 rows-per-page / 8 bits-per-pixel
*/
-#define UG2864AMBAG01_FBSIZE ((UG2864AMBAG01_XRES * UG2864AMBAG01_YRES) >> 3)
-#define UG2864AMBAG01_ROWSIZE (UG2864AMBAG01_XRES)
+#define UG2864AMBAG01_FBSIZE (UG2864AMBAG01_XSTRIDE * UG2864AMBAG01_YRES)
+#define UG2864AMBAG01_ROWSIZE (UG2864AMBAG01_XSTRIDE)
/* Bit helpers */
@@ -270,9 +253,11 @@
/* Debug ******************************************************************************/
#ifdef CONFIG_DEBUG_LCD
-# define lcddbg(format, arg...) vdbg(format, ##arg)
+# define lcddbg(format, arg...) dbg(format, ##arg)
+# define lcdvdbg(format, arg...) vdbg(format, ##arg)
#else
# define lcddbg(x...)
+# define lcdvdbg(x...)
#endif
/**************************************************************************************
@@ -292,20 +277,12 @@ struct ug2864ambag01_dev_s
bool on; /* true: display is on */
- /* If the SH1101A does not support reading from the display memory, then it will be
- * necessary to keep a shadow copy of the framebuffer memory. At 128x64, this amounts
- * to 1KB.
- *
- * If the SH1101A is writable but the display is in a landscape mode then a small
- * 128 / 8 = 16 byte buffer is still required in order to perform the 90 degree
- * rotation.
+ /* The SH1101A does not support reading from the display memory in SPI mode.
+ * Since there is 1 BPP and access is byte-by-byte, it is necessary to keep
+ * a shadow copy of the framebuffer memory. At 128x64, this amounts to 1KB.
*/
-#if CONFIG_UG2864AMBAG01_FRAMEBUFFER
uint8_t fb[UG2864AMBAG01_FBSIZE];
-#elif defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE)
- uint8_t buffer[UG2864AMBAG01_ROWSIZE];
-#endif
};
/**************************************************************************************
@@ -441,8 +418,8 @@ static struct ug2864ambag01_dev_s g_oleddev =
#ifdef CONFIG_SPI_OWNBUS
static inline void ug2864ambag01_configspi(FAR struct spi_dev_s *spi)
{
- lcddbg("Mode: %d Bits: 8 Frequency: %d\n",
- CONFIG_UG2864AMBAG01_SPIMODE, CONFIG_UG2864AMBAG01_FREQUENCY);
+ lcdvdbg("Mode: %d Bits: 8 Frequency: %d\n",
+ CONFIG_UG2864AMBAG01_SPIMODE, CONFIG_UG2864AMBAG01_FREQUENCY);
/* Configure SPI for the UG-2864AMBAG01. But only if we own the SPI bus. Otherwise,
* don't bother because it might change.
@@ -543,7 +520,7 @@ static int ug2864ambag01_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_
int pixlen;
uint8_t i;
- gvdbg("row: %d col: %d npixels: %d\n", row, col, npixels);
+ lcdvdbg("row: %d col: %d npixels: %d\n", row, col, npixels);
DEBUGASSERT(buffer);
/* Clip the run to the display */
@@ -717,7 +694,7 @@ static int ug2864ambag01_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t *buf
int pixlen;
uint8_t i;
- gvdbg("row: %d col: %d npixels: %d\n", row, col, npixels);
+ lcdvdbg("row: %d col: %d npixels: %d\n", row, col, npixels);
DEBUGASSERT(buffer);
/* Clip the run to the display */
@@ -838,8 +815,8 @@ static int ug2864ambag01_getvideoinfo(FAR struct lcd_dev_s *dev,
FAR struct fb_videoinfo_s *vinfo)
{
DEBUGASSERT(dev && vinfo);
- gvdbg("fmt: %d xres: %d yres: %d nplanes: %d\n",
- g_videoinfo.fmt, g_videoinfo.xres, g_videoinfo.yres, g_videoinfo.nplanes);
+ lcdvdbg("fmt: %d xres: %d yres: %d nplanes: %d\n",
+ g_videoinfo.fmt, g_videoinfo.xres, g_videoinfo.yres, g_videoinfo.nplanes);
memcpy(vinfo, &g_videoinfo, sizeof(struct fb_videoinfo_s));
return OK;
}
@@ -856,7 +833,7 @@ static int ug2864ambag01_getplaneinfo(FAR struct lcd_dev_s *dev, unsigned int pl
FAR struct lcd_planeinfo_s *pinfo)
{
DEBUGASSERT(pinfo && planeno == 0);
- gvdbg("planeno: %d bpp: %d\n", planeno, g_planeinfo.bpp);
+ lcdvdbg("planeno: %d bpp: %d\n", planeno, g_planeinfo.bpp);
memcpy(pinfo, &g_planeinfo, sizeof(struct lcd_planeinfo_s));
return OK;
}
@@ -875,7 +852,7 @@ static int ug2864ambag01_getpower(FAR struct lcd_dev_s *dev)
FAR struct ug2864ambag01_dev_s *priv = (FAR struct ug2864ambag01_dev_s *)dev;
DEBUGASSERT(priv);
- gvdbg("power: %s\n", priv->on ? "ON" : "OFF");
+ lcdvdbg("power: %s\n", priv->on ? "ON" : "OFF");
return priv->on ? CONFIG_LCD_MAXPOWER : 0;
}
@@ -893,7 +870,7 @@ static int ug2864ambag01_setpower(struct lcd_dev_s *dev, int power)
struct ug2864ambag01_dev_s *priv = (struct ug2864ambag01_dev_s *)dev;
DEBUGASSERT(priv && (unsigned)power <= CONFIG_LCD_MAXPOWER && priv->spi);
- gvdbg("power: %d [%d]\n", power, priv->on ? CONFIG_LCD_MAXPOWER : 0);
+ lcdvdbg("power: %d [%d]\n", power, priv->on ? CONFIG_LCD_MAXPOWER : 0);
/* Lock and select device */
@@ -935,7 +912,7 @@ static int ug2864ambag01_getcontrast(struct lcd_dev_s *dev)
struct ug2864ambag01_dev_s *priv = (struct ug2864ambag01_dev_s *)dev;
DEBUGASSERT(priv);
- gvdbg("contrast: %d\n", priv->contrast);
+ lcdvdbg("contrast: %d\n", priv->contrast);
return priv->contrast;
}
@@ -952,7 +929,7 @@ static int ug2864ambag01_setcontrast(struct lcd_dev_s *dev, unsigned int contras
struct ug2864ambag01_dev_s *priv = (struct ug2864ambag01_dev_s *)dev;
unsigned int scaled;
- gvdbg("contrast: %d\n", contrast);
+ lcdvdbg("contrast: %d\n", contrast);
DEBUGASSERT(priv);
/* Verify the contrast value */
@@ -1025,7 +1002,7 @@ FAR struct lcd_dev_s *ug2864ambag01_initialize(FAR struct spi_dev_s *spi, unsign
{
FAR struct ug2864ambag01_dev_s *priv = &g_oleddev;
- gvdbg("Initializing\n");
+ lcdvdbg("Initializing\n");
DEBUGASSERT(spi && devno == 0);
/* Save the reference to the SPI device */
@@ -1117,9 +1094,7 @@ void ug2864ambag01_fill(FAR struct lcd_dev_s *dev, uint8_t color)
/* Initialize the framebuffer */
-#ifdef CONFIG_UG2864AMBAG01_FRAMEBUFFER
memset(priv->fb, color, UG2864AMBAG01_FBSIZE);
-#endif
/* Lock and select device */
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-04 03:24:40 +0000