diff options
Diffstat (limited to 'nuttx/include/net/uip/uip-arp.h')
-rw-r--r-- | nuttx/include/net/uip/uip-arp.h | 223 |
1 files changed, 179 insertions, 44 deletions
diff --git a/nuttx/include/net/uip/uip-arp.h b/nuttx/include/net/uip/uip-arp.h index 52f742508..134293ece 100644 --- a/nuttx/include/net/uip/uip-arp.h +++ b/nuttx/include/net/uip/uip-arp.h @@ -1,13 +1,20 @@ -/* uip-arp.h +/**************************************************************************** + * include/net/uip/uip-arch.h * Macros and definitions for the ARP module. - * Author: Adam Dunkels <adam@dunkels.com> * - * Copyright (c) 2001-2003, Adam Dunkels. - * All rights reserved. + * Copyright (C) 2007, 2009 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Derived from uIP with has a similar BSD-styple license: + * + * Author: Adam Dunkels <adam@dunkels.com> + * Copyright (c) 2001-2003, Adam Dunkels. + * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: + * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright @@ -29,16 +36,35 @@ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * - */ + ****************************************************************************/ #ifndef __UIP_ARP_H__ #define __UIP_ARP_H__ +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> #include <sys/types.h> #include <nuttx/compiler.h> #include <net/ethernet.h> #include <net/uip/uip.h> +/**************************************************************************** + * Pre-Processor Definitions + ****************************************************************************/ + +/* Recognized values of the type bytes in the Ethernet header */ + +#define UIP_ETHTYPE_ARP 0x0806 +#define UIP_ETHTYPE_IP 0x0800 +#define UIP_ETHTYPE_IP6 0x86dd + +/**************************************************************************** + * Public Types + ****************************************************************************/ + /* The Ethernet header -- 14 bytes. The first two fields are type 'struct * ether_addr but are represented as a simple byte array here because * some compilers refuse to pack 6 byte structures. @@ -51,55 +77,164 @@ struct uip_eth_hdr uint16 type; /* Type code (2 bytes) */ }; -/* Recognized values of the type bytes in the Ethernet header */ +/* One entry in the ARP table (volatile!) */ -#define UIP_ETHTYPE_ARP 0x0806 -#define UIP_ETHTYPE_IP 0x0800 -#define UIP_ETHTYPE_IP6 0x86dd +struct arp_entry +{ + in_addr_t at_ipaddr; /* IP address */ + struct ether_addr at_ethaddr; /* Hardware address */ + uint8 at_time; +}; -/* The uip_arp_init() function must be called before any of the other - * ARP functions. - */ +/**************************************************************************** + * Public Data + ****************************************************************************/ -void uip_arp_init(void); +#ifdef __cplusplus +#define EXTERN extern "C" +extern "C" { +#else +#define EXTERN extern +#endif -/* The uip_arp_ipin() function should be called whenever an IP packet - * arrives from the Ethernet. This function refreshes the ARP table or - * inserts a new mapping if none exists. The function assumes that an - * IP packet with an Ethernet header is present in the d_buf buffer - * and that the length of the packet is in the d_len field. - */ +/**************************************************************************** + * Public Function Prototypes + ****************************************************************************/ + +/**************************************************************************** + * Name: uip_arp_init + * + * Description: + * Initialize the ARP module. This function must be called before any of + * the other ARP functions. + * + ****************************************************************************/ + +EXTERN void uip_arp_init(void); + +/**************************************************************************** + * Name: uip_arp_init + * + * Description: + * The uip_arp_ipin() function should be called whenever an IP packet + * arrives from the Ethernet. This function refreshes the ARP table or + * inserts a new mapping if none exists. The function assumes that an + * IP packet with an Ethernet header is present in the d_buf buffer + * and that the length of the packet is in the d_len field. + * + ****************************************************************************/ #define uip_arp_ipin() -/* The uip_arp_arpin() should be called when an ARP packet is received - * by the Ethernet driver. This function also assumes that the - * Ethernet frame is present in the d_buf buffer. When the - * uip_arp_arpin() function returns, the contents of the d_buf - * buffer should be sent out on the Ethernet if the d_len field - * is > 0. - */ +/**************************************************************************** + * Name: uip_arp_arpin + * + * Description: + * The uip_arp_arpin() should be called when an ARP packet is received + * by the Ethernet driver. This function also assumes that the + * Ethernet frame is present in the d_buf buffer. When the + * uip_arp_arpin() function returns, the contents of the d_buf + * buffer should be sent out on the Ethernet if the d_len field + * is > 0. + * + ****************************************************************************/ -void uip_arp_arpin(struct uip_driver_s *dev); - -/* The uip_arp_out() function should be called when an IP packet - * should be sent out on the Ethernet. This function creates an - * Ethernet header before the IP header in the d_buf buffer. The - * Ethernet header will have the correct Ethernet MAC destination - * address filled in if an ARP table entry for the destination IP - * address (or the IP address of the default router) is present. If no - * such table entry is found, the IP packet is overwritten with an ARP - * request and we rely on TCP to retransmit the packet that was - * overwritten. In any case, the d_len field holds the length of - * the Ethernet frame that should be transmitted. - */ +EXTERN void uip_arp_arpin(struct uip_driver_s *dev); -void uip_arp_out(struct uip_driver_s *dev); +/**************************************************************************** + * Name: uip_arp_arpin + * + * Description: + * The uip_arp_out() function should be called when an IP packet + * should be sent out on the Ethernet. This function creates an + * Ethernet header before the IP header in the d_buf buffer. The + * Ethernet header will have the correct Ethernet MAC destination + * address filled in if an ARP table entry for the destination IP + * address (or the IP address of the default router) is present. If no + * such table entry is found, the IP packet is overwritten with an ARP + * request and we rely on TCP to retransmit the packet that was + * overwritten. In any case, the d_len field holds the length of + * the Ethernet frame that should be transmitted. + * + ****************************************************************************/ -/* The uip_arp_timer() function should be called every ten seconds. It - * is responsible for flushing old entries in the ARP table. - */ +EXTERN void uip_arp_out(struct uip_driver_s *dev); + +/**************************************************************************** + * Name: uip_arp_timer + * + * Description: + * This function performs periodic timer processing in the ARP module + * and should be called at regular intervals. The recommended interval + * is 10 seconds between the calls. It is responsible for flushing old + * entries in the ARP table. + * + ****************************************************************************/ + +EXTERN void uip_arp_timer(void); + +/**************************************************************************** + * Name: uip_arp_update + * + * Description: + * Add the IP/HW address mapping to the ARP table -OR- change the IP + * address of an existing association. + * + * Input parameters: + * pipaddr - Refers to an IP address uint16[2] in network order + * ethaddr - Refers to a HW address uint8[IFHWADDRLEN] + * + * Assumptions + * Interrupts are disabled + * + ****************************************************************************/ + +EXTERN void uip_arp_update(uint16 *pipaddr, uint8 *ethaddr); + +/**************************************************************************** + * Name: uip_arp_find + * + * Description: + * Find the ARP entry corresponding to this IP address. + * + * Input parameters: + * ipaddr - Refers to an IP address in network order + * + * Assumptions + * Interrupts are disabled; Returned value will become unstable when + * interrupts are re-enabled or if any other uIP APIs are called. + * + ****************************************************************************/ + +EXTERN struct arp_entry *uip_arp_find(in_addr_t ipaddr); -void uip_arp_timer(void); + +/**************************************************************************** + * Name: uip_arp_delete + * + * Description: + * Remove an IP association from the ARP table + * + * Input parameters: + * ipaddr - Refers to an IP address in network order + * + * Assumptions + * Interrupts are disabled + * + ****************************************************************************/ + +#define uip_arp_delete(ipaddr) \ +{ \ + struct arp_entry *tabptr = uip_arp_find(ipaddr); \ + if (tabptr) \ + { \ + tabptr->at_ipaddr = 0; \ + } \ +} + +#undef EXTERN +#ifdef __cplusplus +} +#endif #endif /* __UIP_ARP_H__ */ |