diff options
Diffstat (limited to 'nuttx/net/arp/arp_inout.c')
-rw-r--r-- | nuttx/net/arp/arp_inout.c | 444 |
1 files changed, 444 insertions, 0 deletions
diff --git a/nuttx/net/arp/arp_inout.c b/nuttx/net/arp/arp_inout.c new file mode 100644 index 000000000..78bebae6d --- /dev/null +++ b/nuttx/net/arp/arp_inout.c @@ -0,0 +1,444 @@ +/**************************************************************************** + * net/arp/arm_inout.c + * Implementation of the ARP Address Resolution Protocol. + * + * Copyright (C) 2007-2011, 2014 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Based on uIP which also has a BSD style license: + * + * Author: Adam Dunkels <adam@dunkels.com> + * Copyright (c) 2001-2003, Adam Dunkels. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote + * products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* The Address Resolution Protocol ARP is used for mapping between IP + * addresses and link level addresses such as the Ethernet MAC + * addresses. ARP uses broadcast queries to ask for the link level + * address of a known IP address and the host which is configured with + * the IP address for which the query was meant, will respond with its + * link level address. + * + * Note: This ARP implementation only supports Ethernet. + */ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> +#ifdef CONFIG_NET + +#include <sys/ioctl.h> +#include <stdint.h> +#include <string.h> +#include <debug.h> + +#include <netinet/in.h> + +#include <net/ethernet.h> +#include <nuttx/net/uip/uipopt.h> +#include <nuttx/net/uip/uip-arch.h> +#include <nuttx/net/arp.h> + +#ifdef CONFIG_NET_ARP + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +#define ARP_REQUEST 1 +#define ARP_REPLY 2 + +#define ARP_HWTYPE_ETH 1 + +#define RASIZE 4 /* Size of ROUTER ALERT */ + +#define ETHBUF ((struct uip_eth_hdr *)&dev->d_buf[0]) +#define ARPBUF ((struct arp_hdr_s *)&dev->d_buf[UIP_LLH_LEN]) +#define IPBUF ((struct arp_iphdr_s *)&dev->d_buf[UIP_LLH_LEN]) + +/**************************************************************************** + * Private Types + ****************************************************************************/ + +/* ARP header -- Size 28 bytes */ + +struct arp_hdr_s +{ + uint16_t ah_hwtype; /* 16-bit Hardware type (Ethernet=0x001) */ + uint16_t ah_protocol; /* 16-bit Protocol type (IP=0x0800) */ + uint8_t ah_hwlen; /* 8-bit Hardware address size (6) */ + uint8_t ah_protolen; /* 8-bit Procotol address size (4) */ + uint16_t ah_opcode; /* 16-bit Operation */ + uint8_t ah_shwaddr[6]; /* 48-bit Sender hardware address */ + uint16_t ah_sipaddr[2]; /* 32-bit Sender IP adress */ + uint8_t ah_dhwaddr[6]; /* 48-bit Target hardware address */ + uint16_t ah_dipaddr[2]; /* 32-bit Target IP address */ +}; + +/* IP header -- Size 20 or 24 bytes */ + +struct arp_iphdr_s +{ + uint8_t eh_vhl; /* 8-bit Version (4) and header length (5 or 6) */ + uint8_t eh_tos; /* 8-bit Type of service (e.g., 6=TCP) */ + uint8_t eh_len[2]; /* 16-bit Total length */ + uint8_t eh_ipid[2]; /* 16-bit Identification */ + uint8_t eh_ipoffset[2]; /* 16-bit IP flags + fragment offset */ + uint8_t eh_ttl; /* 8-bit Time to Live */ + uint8_t eh_proto; /* 8-bit Protocol */ + uint16_t eh_ipchksum; /* 16-bit Header checksum */ + uint16_t eh_srcipaddr[2]; /* 32-bit Source IP address */ + uint16_t eh_destipaddr[2]; /* 32-bit Destination IP address */ + uint16_t eh_ipoption[2]; /* (optional) */ +}; + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/* Support for broadcast address */ + +static const struct ether_addr g_broadcast_ethaddr = + {{0xff, 0xff, 0xff, 0xff, 0xff, 0xff}}; +static const uint16_t g_broadcast_ipaddr[2] = {0xffff, 0xffff}; + +/* Support for IGMP multicast addresses. + * + * Well-known ethernet multicast address: + * + * ADDRESS TYPE USAGE + * 01-00-0c-cc-cc-cc 0x0802 CDP (Cisco Discovery Protocol), VTP (Virtual Trunking Protocol) + * 01-00-0c-cc-cc-cd 0x0802 Cisco Shared Spanning Tree Protocol Address + * 01-80-c2-00-00-00 0x0802 Spanning Tree Protocol (for bridges) IEEE 802.1D + * 01-80-c2-00-00-02 0x0809 Ethernet OAM Protocol IEEE 802.3ah + * 01-00-5e-xx-xx-xx 0x0800 IPv4 IGMP Multicast Address + * 33-33-00-00-00-00 0x86DD IPv6 Neighbor Discovery + * 33-33-xx-xx-xx-xx 0x86DD IPv6 Multicast Address (RFC3307) + * + * The following is the first three octects of the IGMP address: + */ + +#if defined(CONFIG_NET_IGMP) && !defined(CONFIG_NET_IPv6) +static const uint8_t g_multicast_ethaddr[3] = {0x01, 0x00, 0x5e}; +#endif + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +#if defined(CONFIG_NET_DUMPARP) && defined(CONFIG_DEBUG) +static void arp_dump(struct arp_hdr_s *arp) +{ + nlldbg(" HW type: %04x Protocol: %04x\n", + arp->ah_hwtype, arp->ah_protocol);\ + nlldbg(" HW len: %02x Proto len: %02x Operation: %04x\n", + arp->ah_hwlen, arp->ah_protolen, arp->ah_opcode); + nlldbg(" Sender MAC: %02x:%02x:%02x:%02x:%02x:%02x IP: %d.%d.%d.%d\n", + arp->ah_shwaddr[0], arp->ah_shwaddr[1], arp->ah_shwaddr[2], + arp->ah_shwaddr[3], arp->ah_shwaddr[4], arp->ah_shwaddr[5], + arp->ah_sipaddr[0] & 0xff, arp->ah_sipaddr[0] >> 8, + arp->ah_sipaddr[1] & 0xff, arp->ah_sipaddr[1] >> 8); + nlldbg(" Dest MAC: %02x:%02x:%02x:%02x:%02x:%02x IP: %d.%d.%d.%d\n", + arp->ah_dhwaddr[0], arp->ah_dhwaddr[1], arp->ah_dhwaddr[2], + arp->ah_dhwaddr[3], arp->ah_dhwaddr[4], arp->ah_dhwaddr[5], + arp->ah_dipaddr[0] & 0xff, arp->ah_dipaddr[0] >> 8, + arp->ah_dipaddr[1] & 0xff, arp->ah_dipaddr[1] >> 8); +} +#else +# define arp_dump(arp) +#endif + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/* ARP processing for incoming IP packets + * + * This function should be called by the device driver when an IP packet has + * been received. The function will check if the address is in the ARP cache, + * and if so the ARP cache entry will be refreshed. If no ARP cache entry was + * found, a new one is created. + * + * This function expects an IP packet with a prepended Ethernet header in the + * d_buf[] buffer, and the length of the packet in the variable d_len. + */ + +#ifdef CONFIG_NET_ARP_IPIN +void arp_ipin(struct uip_driver_s *dev) +{ + in_addr_t srcipaddr; + + /* Only insert/update an entry if the source IP address of the incoming IP + * packet comes from a host on the local network. + */ + + srcipaddr = uip_ip4addr_conv(IPBUF->eh_srcipaddr); + if (uip_ipaddr_maskcmp(srcipaddr, dev->d_ipaddr, dev->d_netmask)) + { + arp_update(IPBUF->eh_srcipaddr, ETHBUF->src); + } +} +#endif /* CONFIG_NET_ARP_IPIN */ + +/* ARP processing for incoming ARP packets. + * + * This function should be called by the device driver when an ARP + * packet has been received. The function will act differently + * depending on the ARP packet type: if it is a reply for a request + * that we previously sent out, the ARP cache will be filled in with + * the values from the ARP reply. If the incoming ARP packet is an ARP + * request for our IP address, an ARP reply packet is created and put + * into the d_buf[] buffer. + * + * When the function returns, the value of the field d_len + * indicates whether the device driver should send out a packet or + * not. If d_len is zero, no packet should be sent. If d_len is + * non-zero, it contains the length of the outbound packet that is + * present in the d_buf[] buffer. + * + * This function expects an ARP packet with a prepended Ethernet + * header in the d_buf[] buffer, and the length of the packet in the + * variable d_len. + */ + +void arp_arpin(struct uip_driver_s *dev) +{ + struct arp_hdr_s *parp = ARPBUF; + in_addr_t ipaddr; + + if (dev->d_len < (sizeof(struct arp_hdr_s) + UIP_LLH_LEN)) + { + nlldbg("Too small\n"); + dev->d_len = 0; + return; + } + + dev->d_len = 0; + + ipaddr = uip_ip4addr_conv(parp->ah_dipaddr); + switch(parp->ah_opcode) + { + case HTONS(ARP_REQUEST): + nllvdbg("ARP request for IP %04lx\n", (long)ipaddr); + + /* ARP request. If it asked for our address, we send out a reply. */ + + if (uip_ipaddr_cmp(ipaddr, dev->d_ipaddr)) + { + struct uip_eth_hdr *peth = ETHBUF; + + /* First, we register the one who made the request in our ARP + * table, since it is likely that we will do more communication + * with this host in the future. + */ + + arp_update(parp->ah_sipaddr, parp->ah_shwaddr); + + parp->ah_opcode = HTONS(ARP_REPLY); + memcpy(parp->ah_dhwaddr, parp->ah_shwaddr, ETHER_ADDR_LEN); + memcpy(parp->ah_shwaddr, dev->d_mac.ether_addr_octet, ETHER_ADDR_LEN); + memcpy(peth->src, dev->d_mac.ether_addr_octet, ETHER_ADDR_LEN); + memcpy(peth->dest, parp->ah_dhwaddr, ETHER_ADDR_LEN); + + parp->ah_dipaddr[0] = parp->ah_sipaddr[0]; + parp->ah_dipaddr[1] = parp->ah_sipaddr[1]; + uiphdr_ipaddr_copy(parp->ah_sipaddr, &dev->d_ipaddr); + arp_dump(parp); + + peth->type = HTONS(UIP_ETHTYPE_ARP); + dev->d_len = sizeof(struct arp_hdr_s) + UIP_LLH_LEN; + } + break; + + case HTONS(ARP_REPLY): + nllvdbg("ARP reply for IP %04lx\n", (long)ipaddr); + + /* ARP reply. We insert or update the ARP table if it was meant + * for us. + */ + + if (uip_ipaddr_cmp(ipaddr, dev->d_ipaddr)) + { + arp_update(parp->ah_sipaddr, parp->ah_shwaddr); + } + break; + } +} + +/* Prepend Ethernet header to an outbound IP packet and see if we need + * to send out an ARP request. + * + * This function should be called before sending out an IP packet. The + * function checks the destination IP address of the IP packet to see + * what Ethernet MAC address that should be used as a destination MAC + * address on the Ethernet. + * + * If the destination IP address is in the local network (determined + * by logical ANDing of netmask and our IP address), the function + * checks the ARP cache to see if an entry for the destination IP + * address is found. If so, an Ethernet header is prepended and the + * function returns. If no ARP cache entry is found for the + * destination IP address, the packet in the d_buf[] is replaced by + * an ARP request packet for the IP address. The IP packet is dropped + * and it is assumed that they higher level protocols (e.g., TCP) + * eventually will retransmit the dropped packet. + * + * If the destination IP address is not on the local network, the IP + * address of the default router is used instead. + * + * When the function returns, a packet is present in the d_buf[] + * buffer, and the length of the packet is in the field d_len. + */ + +void arp_out(struct uip_driver_s *dev) +{ + const struct arp_entry *tabptr = NULL; + struct arp_hdr_s *parp = ARPBUF; + struct uip_eth_hdr *peth = ETHBUF; + struct arp_iphdr_s *pip = IPBUF; + in_addr_t ipaddr; + in_addr_t destipaddr; + + /* Find the destination IP address in the ARP table and construct + * the Ethernet header. If the destination IP address isn't on the + * local network, we use the default router's IP address instead. + * + * If not ARP table entry is found, we overwrite the original IP + * packet with an ARP request for the IP address. + */ + + /* First check if destination is a local broadcast. */ + + if (uiphdr_ipaddr_cmp(pip->eh_destipaddr, g_broadcast_ipaddr)) + { + memcpy(peth->dest, g_broadcast_ethaddr.ether_addr_octet, ETHER_ADDR_LEN); + } + +#if defined(CONFIG_NET_IGMP) && !defined(CONFIG_NET_IPv6) + /* Check if the destination address is a multicast address + * + * - IPv4: multicast addresses lie in the class D group -- The address range + * 224.0.0.0 to 239.255.255.255 (224.0.0.0/4) + * + * - IPv6 multicast addresses are have the high-order octet of the + * addresses=0xff (ff00::/8.) + */ + + else if (NTOHS(pip->eh_destipaddr[0]) >= 0xe000 && + NTOHS(pip->eh_destipaddr[0]) <= 0xefff) + { + /* Build the well-known IPv4 IGMP Ethernet address. The first + * three bytes are fixed; the final three variable come from the + * last three bytes of the IP address. + */ + + const uint8_t *ip = ((uint8_t*)pip->eh_destipaddr) + 1; + memcpy(peth->dest, g_multicast_ethaddr, 3); + memcpy(&peth->dest[3], ip, 3); + } +#endif + else + { + /* Check if the destination address is on the local network. */ + + destipaddr = uip_ip4addr_conv(pip->eh_destipaddr); + if (!uip_ipaddr_maskcmp(destipaddr, dev->d_ipaddr, dev->d_netmask)) + { + /* Destination address is not on the local network */ + +#ifdef CONFIG_NET_ROUTE + /* We have a routing table.. find the correct router to use in + * this case (or, as a fall-back, use the device's default router + * address). We will use the router IP address instead of the + * destination address when determining the MAC address. + */ + + netdev_router(dev, destipaddr, &ipaddr); +#else + /* Use the device's default router IP address instead of the + * destination address when determining the MAC address. + */ + + uip_ipaddr_copy(ipaddr, dev->d_draddr); +#endif + } + else + { + /* Else, we use the destination IP address. */ + + uip_ipaddr_copy(ipaddr, destipaddr); + } + + /* Check if we already have this destination address in the ARP table */ + + tabptr = arp_find(ipaddr); + if (!tabptr) + { + nllvdbg("ARP request for IP %04lx\n", (long)ipaddr); + + /* The destination address was not in our ARP table, so we + * overwrite the IP packet with an ARP request. + */ + + memset(peth->dest, 0xff, ETHER_ADDR_LEN); + memset(parp->ah_dhwaddr, 0x00, ETHER_ADDR_LEN); + memcpy(peth->src, dev->d_mac.ether_addr_octet, ETHER_ADDR_LEN); + memcpy(parp->ah_shwaddr, dev->d_mac.ether_addr_octet, ETHER_ADDR_LEN); + + uiphdr_ipaddr_copy(parp->ah_dipaddr, &ipaddr); + uiphdr_ipaddr_copy(parp->ah_sipaddr, &dev->d_ipaddr); + + parp->ah_opcode = HTONS(ARP_REQUEST); + parp->ah_hwtype = HTONS(ARP_HWTYPE_ETH); + parp->ah_protocol = HTONS(UIP_ETHTYPE_IP); + parp->ah_hwlen = ETHER_ADDR_LEN; + parp->ah_protolen = 4; + arp_dump(parp); + + peth->type = HTONS(UIP_ETHTYPE_ARP); + dev->d_len = sizeof(struct arp_hdr_s) + UIP_LLH_LEN; + return; + } + + /* Build an Ethernet header. */ + + memcpy(peth->dest, tabptr->at_ethaddr.ether_addr_octet, ETHER_ADDR_LEN); + } + + /* Finish populating the Ethernet header */ + + memcpy(peth->src, dev->d_mac.ether_addr_octet, ETHER_ADDR_LEN); + peth->type = HTONS(UIP_ETHTYPE_IP); + dev->d_len += UIP_LLH_LEN; +} + +#endif /* CONFIG_NET_ARP */ +#endif /* CONFIG_NET */ |