diff options
Diffstat (limited to 'nuttx')
-rw-r--r-- | nuttx/ChangeLog | 2 | ||||
-rw-r--r-- | nuttx/Documentation/NuttX.html | 30 | ||||
-rwxr-xr-x | nuttx/configs/olimex-lpc1766stk/README.txt | 58 | ||||
-rwxr-xr-x | nuttx/configs/olimex-lpc1766stk/ftpc/defconfig | 44 | ||||
-rwxr-xr-x | nuttx/configs/olimex-lpc1766stk/hidkbd/defconfig | 42 | ||||
-rwxr-xr-x | nuttx/configs/olimex-lpc1766stk/nettest/defconfig | 44 | ||||
-rw-r--r-- | nuttx/configs/olimex-lpc1766stk/nsh/appconfig | 3 | ||||
-rwxr-xr-x | nuttx/configs/olimex-lpc1766stk/nsh/defconfig | 42 | ||||
-rwxr-xr-x | nuttx/configs/olimex-lpc1766stk/nx/defconfig | 44 | ||||
-rwxr-xr-x | nuttx/configs/olimex-lpc1766stk/ostest/defconfig | 44 | ||||
-rwxr-xr-x | nuttx/configs/olimex-lpc1766stk/slip-httpd/defconfig | 42 | ||||
-rwxr-xr-x | nuttx/configs/olimex-lpc1766stk/thttpd/defconfig | 44 | ||||
-rwxr-xr-x | nuttx/configs/olimex-lpc1766stk/usbserial/defconfig | 44 | ||||
-rwxr-xr-x | nuttx/configs/olimex-lpc1766stk/usbstorage/defconfig | 44 | ||||
-rwxr-xr-x | nuttx/configs/olimex-lpc1766stk/wlan/defconfig | 44 |
15 files changed, 541 insertions, 30 deletions
diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index b84bc3600..a85d9b37b 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -2300,7 +2300,7 @@ 6.14 2012-xx-xx Gregory Nutt <gnutt@nuttx.org> - * tools/Makefile.txport, mkexport.sh, and configure.sh: Changes submitted + * tools/Makefile.export, mkexport.sh, and configure.sh: Changes submitted by Mike Smith to support configuration and 'make export' on MAC OS. * arch/arm/src/stm32/stm32_gpio.c: Disabled interrupts while configuring GPIO pins so that we have exclusive access to the GPIO configuration diff --git a/nuttx/Documentation/NuttX.html b/nuttx/Documentation/NuttX.html index 9a9b5756c..be0d3c9c2 100644 --- a/nuttx/Documentation/NuttX.html +++ b/nuttx/Documentation/NuttX.html @@ -8,7 +8,7 @@ <tr align="center" bgcolor="#e4e4e4"> <td> <h1><big><font color="#3c34ec"><i>NuttX RTOS</i></font></big></h1> - <p>Last Updated: December 26, 2011</p> + <p>Last Updated: January 1, 2012</p> </td> </tr> </table> @@ -2773,8 +2773,36 @@ buildroot-1.10 2011-05-06 <gnutt@nuttx.org> <ul><pre> nuttx-6.14 2012-xx-xx Gregory Nutt <gnutt@nuttx.org> + * tools/Makefile.export, mkexport.sh, and configure.sh: Changes submitted + by Mike Smith to support configuration and 'make export' on MAC OS. + * arch/arm/src/stm32/stm32_gpio.c: Disabled interrupts while configuring + GPIO pins so that we have exclusive access to the GPIO configuration + registers. + * arch/mips/src/pic32mx/pic32mx_usbdev.c: Add a USB device-side driver + for the PIC32MX family. + * arch/arm/src/stm32/stm32_gpio.c: Correct an error in some of the GPIO + initialization logic. Fix submitted by Mike Smith. + * configs/olimex-lpc1766stk/src/up_leds.c: Add new interfaces so that is + CONFIG_ARCH_LEDS are not set, the LEDs may be controlled from application + logic. + * configs/olimex-lpc1766stk/src/up_buttons.c: Add support form the buttons + on the Olimex LPC1766-STK board. + * Makefile: Added 'apps_clean' and 'apps_distclean' target to simplify + managing the state of the application directory while in the NuttX directory + * Documentation/NuttXGettingStarted.html: Added a "Getting Started" Guide + for NuttX. At present, this is just a stub and it refers to the NuttX + top-level README.txt file which is the only, real "Getting Started" Guide + that exists at the time being. + * arch/arm/src/lpc17xx/lpc17_gpioint.c: Correct an value used as the lower + end of an IRQ number range test. + * arch/arm/src/lpc17xx/lpc17_gpio.c: Fix a integer flow problem in shift. + This error would prevent pins > 15 from being used as interrupt sources. + apps-6.14 2012-xx-xx Gregory Nutt <gnutt@nuttx.org> + * apps/examples/buttons/main.c: The test needs to up_buttoninit() to + properly configure the button interrupt GPIOs. + pascal-3.1 2012-xx-xx Gregory Nutt <gnutt@nuttx.org> buildroot-1.11 2012-xx-xx <gnutt@nuttx.org> diff --git a/nuttx/configs/olimex-lpc1766stk/README.txt b/nuttx/configs/olimex-lpc1766stk/README.txt index cb5fa168f..9edbfc513 100755 --- a/nuttx/configs/olimex-lpc1766stk/README.txt +++ b/nuttx/configs/olimex-lpc1766stk/README.txt @@ -812,12 +812,25 @@ Where <subdir> is one of the following: where xx.xx.xx.xx is the IP address of the FTP server and pp is an optional port number (default is the standard FTP port number 21). - You may also want to define the following in your configuration file. - Otherwise, you will have not feeback about what is going on: + NOTES: + + 1. Support for FAT long file names is built-in but can easily be + removed if you are concerned about Microsoft patent issues (see the + section "FAT Long File Names" in the top-level COPYING file). + + CONFIG_FS_FAT=y + CONFIG_FAT_LCNAMES=y <-- Long file name support + CONFIG_FAT_LFN=y + CONFIG_FAT_MAXFNAME=32 + CONFIG_FS_NXFFS=n + CONFIG_FS_ROMFS=n + + 2. You may also want to define the following in your configuration file. + Otherwise, you will have not feedback about what is going on: - CONFIG_DEBUG=y - CONFIG_DEBUG_VERBOSE=y - CONFIG_DEBUG_FTPC=y + CONFIG_DEBUG=y + CONFIG_DEBUG_VERBOSE=y + CONFIG_DEBUG_FTPC=y hidkbd: This configuration directory, performs a simple test of the USB host @@ -831,8 +844,7 @@ Where <subdir> is one of the following: nsh: Configures the NuttShell (nsh) located at apps/examples/nsh. The Configuration enables both the serial and telnet NSH interfaces. - Support for the board's SPI-based MicroSD card is included - (but not passing tests as of this writing). + Support for the board's SPI-based MicroSD card is included. NOTE: If you start the program with no SD card inserted, there will be a substantial delay. This is because there is no hardware support to sense @@ -840,9 +852,37 @@ Where <subdir> is one of the following: go through many retries and timeouts before it finally decides that there is not SD card in the slot. + Configuration Notes: + + 1. Uses the buildroot toolchaing (CONFIG_LPC17_BUILDROOT=y). But that is + easily reconfigured (see above) + 2. Support for FAT long file names is built-in but can easily be + removed if you are concerned about Microsoft patent issues (see the + section "FAT Long File Names" in the top-level COPYING file). + + CONFIG_FS_FAT=y + CONFIG_FAT_LCNAMES=y <-- Long file name support + CONFIG_FAT_LFN=y + CONFIG_FAT_MAXFNAME=32 + CONFIG_FS_NXFFS=n + CONFIG_FS_ROMFS=n + + 3. Includes logic to support a button test (apps/examples/buttons). To + enable the button test, make the following changes in the .config + after configuring: + + -CONFIG_ARCH_BUTTONS=n + +CONFIG_ARCH_BUTTONS=y + + -CONFIG_GPIO_IRQ=n + -CONFIG_ARCH_IRQBUTTONS=n + +CONFIG_GPIO_IRQ=y + +CONFIG_ARCH_IRQBUTTONS=y + nx: - And example using the NuttX graphics system (NX). This example - uses the Nokia 6100 LCD driver. + An example using the NuttX graphics system (NX). This example uses + the Nokia 6100 LCD driver. NOTE: The Nokia 6100 driver does not + work on this board as of this writing. ostest: This configuration directory, performs a simple OS test using diff --git a/nuttx/configs/olimex-lpc1766stk/ftpc/defconfig b/nuttx/configs/olimex-lpc1766stk/ftpc/defconfig index ce92fb24b..5ea9ca17f 100755 --- a/nuttx/configs/olimex-lpc1766stk/ftpc/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/ftpc/defconfig @@ -1,8 +1,8 @@ ############################################################################ # configs/olimex-lpc1766stk/ftpc/defconfig # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions @@ -483,9 +483,49 @@ CONFIG_PREALLOC_TIMERS=8 # # CONFIG_FS_FAT - Enable FAT filesystem support # CONFIG_FAT_SECTORSIZE - Max supported sector size +# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3 +# file name support. +# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims +# patents on FAT long file name technology. Please read the +# disclaimer in the top-level COPYING file and only enable this +# feature if you understand these issues. +# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the +# default, maximum long file name is 255 bytes. This can eat up +# a lot of memory (especially stack space). If you are willing +# to live with some non-standard, short long file names, then +# define this value. A good choice would be the same value as +# selected for CONFIG_NAME_MAX which will limit the visibility +# of longer file names anyway. +# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support. +# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. +# This must have one of the values of 0xff or 0x00. +# Default: 0xff. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name. +# Default: 255. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# Default: 32. +# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean +# packing files together toward the end of the file or, if file are +# deleted at the end of the file, clean up can simply mean erasing +# the end of FLASH memory so that it can be re-used again. However, +# doing this can also harm the life of the FLASH part because it can +# mean that the tail end of the FLASH is re-used too often. This +# threshold determines if/when it is worth erased the tail end of FLASH +# and making it available for re-use (and possible over-wear). +# Default: 8192. # CONFIG_FS_ROMFS - Enable ROMFS filesystem support +# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this +# option will enable a limited form of memory mapping that is +# implemented by copying whole files into memory. # CONFIG_FS_FAT=y +CONFIG_FAT_LCNAMES=y +CONFIG_FAT_LFN=y +CONFIG_FAT_MAXFNAME=32 +CONFIG_FS_NXFFS=n CONFIG_FS_ROMFS=n # diff --git a/nuttx/configs/olimex-lpc1766stk/hidkbd/defconfig b/nuttx/configs/olimex-lpc1766stk/hidkbd/defconfig index bdccfa411..e26511fa8 100755 --- a/nuttx/configs/olimex-lpc1766stk/hidkbd/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/hidkbd/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/olimex-lpc1766stk/hidkbd/defconfig # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -466,9 +466,49 @@ CONFIG_PREALLOC_TIMERS=4 # # CONFIG_FS_FAT - Enable FAT filesystem support # CONFIG_FAT_SECTORSIZE - Max supported sector size +# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3 +# file name support. +# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims +# patents on FAT long file name technology. Please read the +# disclaimer in the top-level COPYING file and only enable this +# feature if you understand these issues. +# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the +# default, maximum long file name is 255 bytes. This can eat up +# a lot of memory (especially stack space). If you are willing +# to live with some non-standard, short long file names, then +# define this value. A good choice would be the same value as +# selected for CONFIG_NAME_MAX which will limit the visibility +# of longer file names anyway. +# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support. +# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. +# This must have one of the values of 0xff or 0x00. +# Default: 0xff. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name. +# Default: 255. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# Default: 32. +# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean +# packing files together toward the end of the file or, if file are +# deleted at the end of the file, clean up can simply mean erasing +# the end of FLASH memory so that it can be re-used again. However, +# doing this can also harm the life of the FLASH part because it can +# mean that the tail end of the FLASH is re-used too often. This +# threshold determines if/when it is worth erased the tail end of FLASH +# and making it available for re-use (and possible over-wear). +# Default: 8192. # CONFIG_FS_ROMFS - Enable ROMFS filesystem support +# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this +# option will enable a limited form of memory mapping that is +# implemented by copying whole files into memory. # CONFIG_FS_FAT=n +CONFIG_FAT_LCNAMES=n +CONFIG_FAT_LFN=n +CONFIG_FAT_MAXFNAME=32 +CONFIG_FS_NXFFS=n CONFIG_FS_ROMFS=n # diff --git a/nuttx/configs/olimex-lpc1766stk/nettest/defconfig b/nuttx/configs/olimex-lpc1766stk/nettest/defconfig index 89d1ad54a..5ba14173d 100755 --- a/nuttx/configs/olimex-lpc1766stk/nettest/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/nettest/defconfig @@ -1,8 +1,8 @@ ############################################################################ # configs/olimex-lpc1766stk/nettest/defconfig # -# Copyright (C) 2010 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# Copyright (C) 2010-2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions @@ -466,9 +466,49 @@ CONFIG_PREALLOC_TIMERS=8 # # CONFIG_FS_FAT - Enable FAT filesystem support # CONFIG_FAT_SECTORSIZE - Max supported sector size +# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3 +# file name support. +# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims +# patents on FAT long file name technology. Please read the +# disclaimer in the top-level COPYING file and only enable this +# feature if you understand these issues. +# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the +# default, maximum long file name is 255 bytes. This can eat up +# a lot of memory (especially stack space). If you are willing +# to live with some non-standard, short long file names, then +# define this value. A good choice would be the same value as +# selected for CONFIG_NAME_MAX which will limit the visibility +# of longer file names anyway. +# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support. +# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. +# This must have one of the values of 0xff or 0x00. +# Default: 0xff. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name. +# Default: 255. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# Default: 32. +# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean +# packing files together toward the end of the file or, if file are +# deleted at the end of the file, clean up can simply mean erasing +# the end of FLASH memory so that it can be re-used again. However, +# doing this can also harm the life of the FLASH part because it can +# mean that the tail end of the FLASH is re-used too often. This +# threshold determines if/when it is worth erased the tail end of FLASH +# and making it available for re-use (and possible over-wear). +# Default: 8192. # CONFIG_FS_ROMFS - Enable ROMFS filesystem support +# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this +# option will enable a limited form of memory mapping that is +# implemented by copying whole files into memory. # CONFIG_FS_FAT=n +CONFIG_FAT_LCNAMES=n +CONFIG_FAT_LFN=n +CONFIG_FAT_MAXFNAME=32 +CONFIG_FS_NXFFS=n CONFIG_FS_ROMFS=n # diff --git a/nuttx/configs/olimex-lpc1766stk/nsh/appconfig b/nuttx/configs/olimex-lpc1766stk/nsh/appconfig index 7a2321613..a2f7f9f26 100644 --- a/nuttx/configs/olimex-lpc1766stk/nsh/appconfig +++ b/nuttx/configs/olimex-lpc1766stk/nsh/appconfig @@ -51,4 +51,7 @@ CONFIGURED_APPS += netutils/tftpc CONFIGURED_APPS += netutils/webclient endif +ifeq ($(CONFIG_ARCH_BUTTONS),y) +CONFIGURED_APPS += examples/buttons +endif diff --git a/nuttx/configs/olimex-lpc1766stk/nsh/defconfig b/nuttx/configs/olimex-lpc1766stk/nsh/defconfig index 0b058f5b9..404e7c7f3 100755 --- a/nuttx/configs/olimex-lpc1766stk/nsh/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/nsh/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/olimex-lpc1766stk/nsh/defconfig # -# Copyright (C) 2010-2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2010-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -484,9 +484,49 @@ CONFIG_PREALLOC_TIMERS=4 # # CONFIG_FS_FAT - Enable FAT filesystem support # CONFIG_FAT_SECTORSIZE - Max supported sector size +# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3 +# file name support. +# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims +# patents on FAT long file name technology. Please read the +# disclaimer in the top-level COPYING file and only enable this +# feature if you understand these issues. +# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the +# default, maximum long file name is 255 bytes. This can eat up +# a lot of memory (especially stack space). If you are willing +# to live with some non-standard, short long file names, then +# define this value. A good choice would be the same value as +# selected for CONFIG_NAME_MAX which will limit the visibility +# of longer file names anyway. +# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support. +# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. +# This must have one of the values of 0xff or 0x00. +# Default: 0xff. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name. +# Default: 255. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# Default: 32. +# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean +# packing files together toward the end of the file or, if file are +# deleted at the end of the file, clean up can simply mean erasing +# the end of FLASH memory so that it can be re-used again. However, +# doing this can also harm the life of the FLASH part because it can +# mean that the tail end of the FLASH is re-used too often. This +# threshold determines if/when it is worth erased the tail end of FLASH +# and making it available for re-use (and possible over-wear). +# Default: 8192. # CONFIG_FS_ROMFS - Enable ROMFS filesystem support +# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this +# option will enable a limited form of memory mapping that is +# implemented by copying whole files into memory. # CONFIG_FS_FAT=y +CONFIG_FAT_LCNAMES=y +CONFIG_FAT_LFN=y +CONFIG_FAT_MAXFNAME=32 +CONFIG_FS_NXFFS=n CONFIG_FS_ROMFS=n # diff --git a/nuttx/configs/olimex-lpc1766stk/nx/defconfig b/nuttx/configs/olimex-lpc1766stk/nx/defconfig index 1bfe7e076..691d3a269 100755 --- a/nuttx/configs/olimex-lpc1766stk/nx/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/nx/defconfig @@ -1,8 +1,8 @@ ############################################################################ # configs/olimex-lpc1766stk/nx/defconfig # -# Copyright (C) 2010 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# Copyright (C) 2010-2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions @@ -478,9 +478,49 @@ CONFIG_FB_HWCURSORIMAGE=n # # CONFIG_FS_FAT - Enable FAT filesystem support # CONFIG_FAT_SECTORSIZE - Max supported sector size +# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3 +# file name support. +# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims +# patents on FAT long file name technology. Please read the +# disclaimer in the top-level COPYING file and only enable this +# feature if you understand these issues. +# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the +# default, maximum long file name is 255 bytes. This can eat up +# a lot of memory (especially stack space). If you are willing +# to live with some non-standard, short long file names, then +# define this value. A good choice would be the same value as +# selected for CONFIG_NAME_MAX which will limit the visibility +# of longer file names anyway. +# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support. +# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. +# This must have one of the values of 0xff or 0x00. +# Default: 0xff. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name. +# Default: 255. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# Default: 32. +# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean +# packing files together toward the end of the file or, if file are +# deleted at the end of the file, clean up can simply mean erasing +# the end of FLASH memory so that it can be re-used again. However, +# doing this can also harm the life of the FLASH part because it can +# mean that the tail end of the FLASH is re-used too often. This +# threshold determines if/when it is worth erased the tail end of FLASH +# and making it available for re-use (and possible over-wear). +# Default: 8192. # CONFIG_FS_ROMFS - Enable ROMFS filesystem support +# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this +# option will enable a limited form of memory mapping that is +# implemented by copying whole files into memory. # CONFIG_FS_FAT=n +CONFIG_FAT_LCNAMES=n +CONFIG_FAT_LFN=n +CONFIG_FAT_MAXFNAME=32 +CONFIG_FS_NXFFS=n CONFIG_FS_ROMFS=n # diff --git a/nuttx/configs/olimex-lpc1766stk/ostest/defconfig b/nuttx/configs/olimex-lpc1766stk/ostest/defconfig index ba3934100..8a324c171 100755 --- a/nuttx/configs/olimex-lpc1766stk/ostest/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/ostest/defconfig @@ -1,8 +1,8 @@ ############################################################################ # configs/olimex-lpc1766stk/ostest/defconfig # -# Copyright (C) 2010 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# Copyright (C) 2010-2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions @@ -459,9 +459,49 @@ CONFIG_PREALLOC_TIMERS=4 # # CONFIG_FS_FAT - Enable FAT filesystem support # CONFIG_FAT_SECTORSIZE - Max supported sector size +# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3 +# file name support. +# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims +# patents on FAT long file name technology. Please read the +# disclaimer in the top-level COPYING file and only enable this +# feature if you understand these issues. +# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the +# default, maximum long file name is 255 bytes. This can eat up +# a lot of memory (especially stack space). If you are willing +# to live with some non-standard, short long file names, then +# define this value. A good choice would be the same value as +# selected for CONFIG_NAME_MAX which will limit the visibility +# of longer file names anyway. +# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support. +# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. +# This must have one of the values of 0xff or 0x00. +# Default: 0xff. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name. +# Default: 255. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# Default: 32. +# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean +# packing files together toward the end of the file or, if file are +# deleted at the end of the file, clean up can simply mean erasing +# the end of FLASH memory so that it can be re-used again. However, +# doing this can also harm the life of the FLASH part because it can +# mean that the tail end of the FLASH is re-used too often. This +# threshold determines if/when it is worth erased the tail end of FLASH +# and making it available for re-use (and possible over-wear). +# Default: 8192. # CONFIG_FS_ROMFS - Enable ROMFS filesystem support +# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this +# option will enable a limited form of memory mapping that is +# implemented by copying whole files into memory. # CONFIG_FS_FAT=n +CONFIG_FAT_LCNAMES=n +CONFIG_FAT_LFN=n +CONFIG_FAT_MAXFNAME=32 +CONFIG_FS_NXFFS=n CONFIG_FS_ROMFS=n # diff --git a/nuttx/configs/olimex-lpc1766stk/slip-httpd/defconfig b/nuttx/configs/olimex-lpc1766stk/slip-httpd/defconfig index b51be7d2c..ef7f29707 100755 --- a/nuttx/configs/olimex-lpc1766stk/slip-httpd/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/slip-httpd/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/olimex-lpc1766stk/slip-httpd/defconfig # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -477,9 +477,49 @@ CONFIG_PREALLOC_TIMERS=8 # # CONFIG_FS_FAT - Enable FAT filesystem support # CONFIG_FAT_SECTORSIZE - Max supported sector size +# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3 +# file name support. +# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims +# patents on FAT long file name technology. Please read the +# disclaimer in the top-level COPYING file and only enable this +# feature if you understand these issues. +# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the +# default, maximum long file name is 255 bytes. This can eat up +# a lot of memory (especially stack space). If you are willing +# to live with some non-standard, short long file names, then +# define this value. A good choice would be the same value as +# selected for CONFIG_NAME_MAX which will limit the visibility +# of longer file names anyway. +# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support. +# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. +# This must have one of the values of 0xff or 0x00. +# Default: 0xff. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name. +# Default: 255. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# Default: 32. +# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean +# packing files together toward the end of the file or, if file are +# deleted at the end of the file, clean up can simply mean erasing +# the end of FLASH memory so that it can be re-used again. However, +# doing this can also harm the life of the FLASH part because it can +# mean that the tail end of the FLASH is re-used too often. This +# threshold determines if/when it is worth erased the tail end of FLASH +# and making it available for re-use (and possible over-wear). +# Default: 8192. # CONFIG_FS_ROMFS - Enable ROMFS filesystem support +# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this +# option will enable a limited form of memory mapping that is +# implemented by copying whole files into memory. # CONFIG_FS_FAT=n +CONFIG_FAT_LCNAMES=n +CONFIG_FAT_LFN=n +CONFIG_FAT_MAXFNAME=32 +CONFIG_FS_NXFFS=n CONFIG_FS_ROMFS=y # diff --git a/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig b/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig index 82ed2f806..46328bdd4 100755 --- a/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig @@ -1,8 +1,8 @@ ############################################################################ # configs/olimex-lpc1766stk/thttpd/defconfig # -# Copyright (C) 2010 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# Copyright (C) 2010-2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions @@ -475,9 +475,49 @@ CONFIG_PREALLOC_TIMERS=8 # # CONFIG_FS_FAT - Enable FAT filesystem support # CONFIG_FAT_SECTORSIZE - Max supported sector size +# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3 +# file name support. +# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims +# patents on FAT long file name technology. Please read the +# disclaimer in the top-level COPYING file and only enable this +# feature if you understand these issues. +# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the +# default, maximum long file name is 255 bytes. This can eat up +# a lot of memory (especially stack space). If you are willing +# to live with some non-standard, short long file names, then +# define this value. A good choice would be the same value as +# selected for CONFIG_NAME_MAX which will limit the visibility +# of longer file names anyway. +# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support. +# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. +# This must have one of the values of 0xff or 0x00. +# Default: 0xff. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name. +# Default: 255. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# Default: 32. +# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean +# packing files together toward the end of the file or, if file are +# deleted at the end of the file, clean up can simply mean erasing +# the end of FLASH memory so that it can be re-used again. However, +# doing this can also harm the life of the FLASH part because it can +# mean that the tail end of the FLASH is re-used too often. This +# threshold determines if/when it is worth erased the tail end of FLASH +# and making it available for re-use (and possible over-wear). +# Default: 8192. # CONFIG_FS_ROMFS - Enable ROMFS filesystem support +# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this +# option will enable a limited form of memory mapping that is +# implemented by copying whole files into memory. # CONFIG_FS_FAT=n +CONFIG_FAT_LCNAMES=n +CONFIG_FAT_LFN=n +CONFIG_FAT_MAXFNAME=32 +CONFIG_FS_NXFFS=n CONFIG_FS_ROMFS=y # diff --git a/nuttx/configs/olimex-lpc1766stk/usbserial/defconfig b/nuttx/configs/olimex-lpc1766stk/usbserial/defconfig index f7b23816f..d880f0686 100755 --- a/nuttx/configs/olimex-lpc1766stk/usbserial/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/usbserial/defconfig @@ -1,8 +1,8 @@ ############################################################################ # configs/olimex-lpc1766stk/usbserial/defconfig # -# Copyright (C) 2010 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# Copyright (C) 2010-2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions @@ -460,9 +460,49 @@ CONFIG_PREALLOC_TIMERS=4 # # CONFIG_FS_FAT - Enable FAT filesystem support # CONFIG_FAT_SECTORSIZE - Max supported sector size +# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3 +# file name support. +# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims +# patents on FAT long file name technology. Please read the +# disclaimer in the top-level COPYING file and only enable this +# feature if you understand these issues. +# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the +# default, maximum long file name is 255 bytes. This can eat up +# a lot of memory (especially stack space). If you are willing +# to live with some non-standard, short long file names, then +# define this value. A good choice would be the same value as +# selected for CONFIG_NAME_MAX which will limit the visibility +# of longer file names anyway. +# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support. +# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. +# This must have one of the values of 0xff or 0x00. +# Default: 0xff. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name. +# Default: 255. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# Default: 32. +# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean +# packing files together toward the end of the file or, if file are +# deleted at the end of the file, clean up can simply mean erasing +# the end of FLASH memory so that it can be re-used again. However, +# doing this can also harm the life of the FLASH part because it can +# mean that the tail end of the FLASH is re-used too often. This +# threshold determines if/when it is worth erased the tail end of FLASH +# and making it available for re-use (and possible over-wear). +# Default: 8192. # CONFIG_FS_ROMFS - Enable ROMFS filesystem support +# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this +# option will enable a limited form of memory mapping that is +# implemented by copying whole files into memory. # CONFIG_FS_FAT=n +CONFIG_FAT_LCNAMES=n +CONFIG_FAT_LFN=n +CONFIG_FAT_MAXFNAME=32 +CONFIG_FS_NXFFS=n CONFIG_FS_ROMFS=n # diff --git a/nuttx/configs/olimex-lpc1766stk/usbstorage/defconfig b/nuttx/configs/olimex-lpc1766stk/usbstorage/defconfig index e3f2c0d71..d09a2576e 100755 --- a/nuttx/configs/olimex-lpc1766stk/usbstorage/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/usbstorage/defconfig @@ -1,8 +1,8 @@ ############################################################################ # configs/olimex-lpc1766stk/usbstorage/defconfig # -# Copyright (C) 2010 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# Copyright (C) 2010-2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions @@ -460,9 +460,49 @@ CONFIG_PREALLOC_TIMERS=4 # # CONFIG_FS_FAT - Enable FAT filesystem support # CONFIG_FAT_SECTORSIZE - Max supported sector size +# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3 +# file name support. +# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims +# patents on FAT long file name technology. Please read the +# disclaimer in the top-level COPYING file and only enable this +# feature if you understand these issues. +# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the +# default, maximum long file name is 255 bytes. This can eat up +# a lot of memory (especially stack space). If you are willing +# to live with some non-standard, short long file names, then +# define this value. A good choice would be the same value as +# selected for CONFIG_NAME_MAX which will limit the visibility +# of longer file names anyway. +# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support. +# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. +# This must have one of the values of 0xff or 0x00. +# Default: 0xff. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name. +# Default: 255. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# Default: 32. +# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean +# packing files together toward the end of the file or, if file are +# deleted at the end of the file, clean up can simply mean erasing +# the end of FLASH memory so that it can be re-used again. However, +# doing this can also harm the life of the FLASH part because it can +# mean that the tail end of the FLASH is re-used too often. This +# threshold determines if/when it is worth erased the tail end of FLASH +# and making it available for re-use (and possible over-wear). +# Default: 8192. # CONFIG_FS_ROMFS - Enable ROMFS filesystem support +# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this +# option will enable a limited form of memory mapping that is +# implemented by copying whole files into memory. # CONFIG_FS_FAT=n +CONFIG_FAT_LCNAMES=n +CONFIG_FAT_LFN=n +CONFIG_FAT_MAXFNAME=32 +CONFIG_FS_NXFFS=n CONFIG_FS_ROMFS=n # diff --git a/nuttx/configs/olimex-lpc1766stk/wlan/defconfig b/nuttx/configs/olimex-lpc1766stk/wlan/defconfig index 3f60ec1ad..10068605e 100755 --- a/nuttx/configs/olimex-lpc1766stk/wlan/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/wlan/defconfig @@ -1,8 +1,8 @@ ############################################################################ # configs/olimex-lpc1766stk/wlan/defconfig # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions @@ -460,9 +460,49 @@ CONFIG_PREALLOC_TIMERS=4 # # CONFIG_FS_FAT - Enable FAT filesystem support # CONFIG_FAT_SECTORSIZE - Max supported sector size +# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3 +# file name support. +# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims +# patents on FAT long file name technology. Please read the +# disclaimer in the top-level COPYING file and only enable this +# feature if you understand these issues. +# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the +# default, maximum long file name is 255 bytes. This can eat up +# a lot of memory (especially stack space). If you are willing +# to live with some non-standard, short long file names, then +# define this value. A good choice would be the same value as +# selected for CONFIG_NAME_MAX which will limit the visibility +# of longer file names anyway. +# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support. +# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. +# This must have one of the values of 0xff or 0x00. +# Default: 0xff. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name. +# Default: 255. +# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, +# don't both with file chunks smaller than this number of data bytes. +# Default: 32. +# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean +# packing files together toward the end of the file or, if file are +# deleted at the end of the file, clean up can simply mean erasing +# the end of FLASH memory so that it can be re-used again. However, +# doing this can also harm the life of the FLASH part because it can +# mean that the tail end of the FLASH is re-used too often. This +# threshold determines if/when it is worth erased the tail end of FLASH +# and making it available for re-use (and possible over-wear). +# Default: 8192. # CONFIG_FS_ROMFS - Enable ROMFS filesystem support +# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this +# option will enable a limited form of memory mapping that is +# implemented by copying whole files into memory. # CONFIG_FS_FAT=n +CONFIG_FAT_LCNAMES=n +CONFIG_FAT_LFN=n +CONFIG_FAT_MAXFNAME=32 +CONFIG_FS_NXFFS=n CONFIG_FS_ROMFS=n # |