diff options
Diffstat (limited to 'nuttx')
-rw-r--r-- | nuttx/ChangeLog | 2 | ||||
-rw-r--r-- | nuttx/arch/arm/src/lpc43xx/Make.defs | 4 | ||||
-rw-r--r-- | nuttx/arch/arm/src/lpc43xx/chip/lpc4310203050_pinconfig.h | 12 | ||||
-rw-r--r-- | nuttx/arch/arm/src/lpc43xx/chip/lpc43_cgu.h | 4 | ||||
-rw-r--r-- | nuttx/arch/arm/src/lpc43xx/chip/lpc43_spifi.h | 250 | ||||
-rw-r--r-- | nuttx/arch/arm/src/lpc43xx/lpc43_debug.c | 8 | ||||
-rw-r--r-- | nuttx/arch/arm/src/lpc43xx/lpc43_spifi.c | 320 | ||||
-rw-r--r-- | nuttx/arch/arm/src/lpc43xx/lpc43_spifi.h | 84 | ||||
-rw-r--r-- | nuttx/configs/lpc4330-xplorer/README.txt | 3 | ||||
-rw-r--r-- | nuttx/configs/lpc4330-xplorer/include/board.h | 30 | ||||
-rw-r--r-- | nuttx/configs/lpc4330-xplorer/nsh/defconfig | 3 | ||||
-rw-r--r-- | nuttx/configs/lpc4330-xplorer/src/up_nsh.c | 68 | ||||
-rwxr-xr-x | nuttx/configs/lpcxpresso-lpc1768/README.txt | 32 |
13 files changed, 763 insertions, 57 deletions
diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index 5ca5aebcc..e33bee750 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -3016,4 +3016,6 @@ * arch/arm/src/stm32/stm32_exti_alarm.c: Add initial logic to attached the RTC alarm EXTI interrupt. This is work be performed mostly by Diego Sanchez. * include/: More stylistic file clean-up. + * arch/arm/src/lpc43xx/lpc43_spifi.c, lpc43_spifi.h, and chip/lpc43_spifi.h: Add + logic to configure and intialize the SPIFI device (does not yet work). diff --git a/nuttx/arch/arm/src/lpc43xx/Make.defs b/nuttx/arch/arm/src/lpc43xx/Make.defs index 1dbb3e957..4b75afffc 100644 --- a/nuttx/arch/arm/src/lpc43xx/Make.defs +++ b/nuttx/arch/arm/src/lpc43xx/Make.defs @@ -82,6 +82,10 @@ ifeq ($(CONFIG_LPC43_SPI),y) CHIP_CSRCS += lpc43_spi.c endif +ifeq ($(CONFIG_LPC43_SPIFI),y) +CHIP_CSRCS += lpc43_spifi.c +endif + ifeq ($(CONFIG_LPC43_SSP0),y) CHIP_CSRCS += lpc43_ssp.c else diff --git a/nuttx/arch/arm/src/lpc43xx/chip/lpc4310203050_pinconfig.h b/nuttx/arch/arm/src/lpc43xx/chip/lpc4310203050_pinconfig.h index 375b0ceb7..c1c710e0c 100644 --- a/nuttx/arch/arm/src/lpc43xx/chip/lpc4310203050_pinconfig.h +++ b/nuttx/arch/arm/src/lpc43xx/chip/lpc4310203050_pinconfig.h @@ -707,12 +707,12 @@ #define PINCONF_SGPIO15_2 (PINCONF_FUNC6|PINCONF_PINS1|PINCONF_PIN_5) #define PINCONF_SGPIO15_3 (PINCONF_FUNC7|PINCONF_PINS4|PINCONF_PIN_10) -#define PINCONF_SPIFI_CS (PINCONF_FUNC3|PINCONF_PINS3|PINCONF_PIN_8) -#define PINCONF_SPIFI_MISO (PINCONF_FUNC3|PINCONF_PINS3|PINCONF_PIN_6) -#define PINCONF_SPIFI_MOSI (PINCONF_FUNC3|PINCONF_PINS3|PINCONF_PIN_7) -#define PINCONF_SPIFI_SCK (PINCONF_FUNC3|PINCONF_PINS3|PINCONF_PIN_3) -#define PINCONF_SPIFI_SIO2 (PINCONF_FUNC3|PINCONF_PINS3|PINCONF_PIN_5) -#define PINCONF_SPIFI_SIO3 (PINCONF_FUNC3|PINCONF_PINS3|PINCONF_PIN_4) +#define PINCONF_SPIFI_CS (PINCONF_FUNC3|PINCONF_SLEW_FAST|PINCONF_PINS3|PINCONF_PIN_8) +#define PINCONF_SPIFI_MISO (PINCONF_FUNC3|PINCONF_SLEW_FAST|PINCONF_INBUFFER|PINCONF_GLITCH|PINCONF_PINS3|PINCONF_PIN_6) +#define PINCONF_SPIFI_MOSI (PINCONF_FUNC3|PINCONF_SLEW_FAST|PINCONF_INBUFFER|PINCONF_GLITCH|PINCONF_PINS3|PINCONF_PIN_7) +#define PINCONF_SPIFI_SCK (PINCONF_FUNC3|PINCONF_SLEW_FAST|PINCONF_INBUFFER|PINCONF_GLITCH|PINCONF_PINS3|PINCONF_PIN_3) +#define PINCONF_SPIFI_SIO2 (PINCONF_FUNC3|PINCONF_SLEW_FAST|PINCONF_INBUFFER|PINCONF_GLITCH|PINCONF_PINS3|PINCONF_PIN_5) +#define PINCONF_SPIFI_SIO3 (PINCONF_FUNC3|PINCONF_SLEW_FAST|PINCONF_INBUFFER|PINCONF_GLITCH|PINCONF_PINS3|PINCONF_PIN_4) #define PINCONF_SPI_MISO (PINCONF_FUNC1|PINCONF_PINS3|PINCONF_PIN_6) #define PINCONF_SPI_MOSI (PINCONF_FUNC1|PINCONF_PINS3|PINCONF_PIN_7) diff --git a/nuttx/arch/arm/src/lpc43xx/chip/lpc43_cgu.h b/nuttx/arch/arm/src/lpc43xx/chip/lpc43_cgu.h index a71954153..61fa3be0b 100644 --- a/nuttx/arch/arm/src/lpc43xx/chip/lpc43_cgu.h +++ b/nuttx/arch/arm/src/lpc43xx/chip/lpc43_cgu.h @@ -356,7 +356,7 @@ /* Bit 1: Reserved */ #define IDIVBCD_CTRL_IDIV_SHIFT (2) /* Bits 2-5: Integer divider A divider values (1/(IDIV + 1)) */ #define IDIVBCD_CTRL_IDIV_MASK (15 << IDIVBCD_CTRL_IDIV_SHIFT) -# define IDIVBCD_CTRL_IDIV_DIV(n) (((n)-1) << IDIVBCD_CTRL_IDIV_SHIFT) /* n=1..16 */ +# define IDIVBCD_CTRL_IDIV(n) (((n)-1) << IDIVBCD_CTRL_IDIV_SHIFT) /* n=1..16 */ /* Bits 6-10: Reserved */ #define IDIVBCD_CTRL_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */ /* Bits 12-23: Reserved */ @@ -378,7 +378,7 @@ /* Bit 1: Reserved */ #define IDIVE_CTRL_IDIV_SHIFT (2) /* Bits 2-9: Integer divider A divider values (1/(IDIV + 1)) */ #define IDIVE_CTRL_IDIV_MASK (0xff << IDIVE_CTRL_IDIV_SHIFT) -# define IDIVE_CTRL_IDIV_DIV(n) (((n)-1) << IDIVE_CTRL_IDIV_SHIFT) /* n=1..256 */ +# define IDIVE_CTRL_IDIV(n) (((n)-1) << IDIVE_CTRL_IDIV_SHIFT) /* n=1..256 */ /* Bit 10: Reserved */ #define IDIVE_CTRL_AUTOBLOCK (1 << 11) /* Bit 11: Block clock during frequency change */ /* Bits 12-23: Reserved */ diff --git a/nuttx/arch/arm/src/lpc43xx/chip/lpc43_spifi.h b/nuttx/arch/arm/src/lpc43xx/chip/lpc43_spifi.h new file mode 100644 index 000000000..711f10ac3 --- /dev/null +++ b/nuttx/arch/arm/src/lpc43xx/chip/lpc43_spifi.h @@ -0,0 +1,250 @@ +/**************************************************************************** + * arch/arm/src/lpc43/chip/lpc43_spifi.h + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + **************************************************************************** + * + * NOTE: The SPIFI ROM interface is not defined in the LPC43xx user manual. + * Some information in this file drivers from the NXP header file + * spifi_rom_api.h. I do not believe that any copyright restrictions apply. + * But just to be certain: + * + * Copyright(C) 2011, NXP Semiconductor + * All rights reserved. + * + * Software that is described herein is for illustrative purposes only which + * provides customers with programming information regarding the products. + * This software is supplied "AS IS" without any warranties. NXP + * Semiconductors assumes no responsibility or liability for the use of the + * software, conveys no license or title under any patent, copyright, or + * mask work right to the product. NXP Semiconductors reserves the right to + * make changes in the software without notification. NXP Semiconductors + * also make no representation or warranty that such application will be + * suitable for the specified use without further testing or modification. + * Permission to use, copy, modify, and distribute this software and its + * documentation is hereby granted, under NXP Semiconductors' relevant + * copyright in the software, without fee, provided that it is used in + * conjunction with NXP Semiconductors microcontrollers. This copyright, + * permission, and disclaimer notice must appear in all copies of this code. + * + ****************************************************************************/ + +#ifndef __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_SPIFI_H +#define __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_SPIFI_H + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* The largest protection block of any serial flash that the ROM driver + * can handle + */ + +#define SPIFI_LONGEST_PROTBLOCK 68 + +/* Protection flag bit definitions */ + +#define SPIFI_RWPROT (1 << 0) + +/* Instruction classes for wait_busy */ + +#define SPIFI_STAT_INST 0 +#define SPIFI_BLOCK_ERASE 1 +#define SPIFI_PROG_INST 2 +#define SPIFI_CHIP_ERASE 3 + +/* Bit definitions in options operands (MODE3, RCVCLK, and FULLCLK + * have the same relationship as in the Control register) + */ + +#define SPIFI_MODE3 (1 << 0) +#define SPIFI_MODE0 (0) +#define SPIFI_MINIMAL (1 << 1) +#define SPIFI_MAXIMAL (0) +#define SPIFI_FORCE_ERASE (1 << 2) +#define SPIFI_ERASE_NOT_REQD (1 << 3) +#define SPIFI_CALLER_ERASE (1 << 3) +#define SPIFI_ERASE_AS_REQD (0) +#define SPIFI_VERIFY_PROG (1 << 4) +#define SPIFI_VERIFY_ERASE (1 << 5) +#define SPIFI_NO_VERIFY (0) +#define SPIFI_FULLCLK (1 << 6) +#define SPIFI_HALFCLK (0) +#define SPIFI_RCVCLK (1 << 7) +#define SPIFI_INTCLK (0) +#define SPIFI_DUAL (1 << 8) +#define SPIFI_CALLER_PROT (1 << 9) +#define SPIFI_DRIVER_PROT (0) + +/* The length of a standard program command is 256 on all devices */ + +#define PROG_SIZE 256 + +/* SPI ROM driver table pointer */ + +#define SPIFI_ROM_PTR LPC43_ROM_DRIVER_TABLE6 +#define pSPIFI *((struct spifi_driver_s **)SPIFI_ROM_PTR) + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* Protection/sector descriptors */ + +struct spfi_desc_s +{ + uint32_t base; + uint8_t flags; + int8_t log2; + uint16_t rept; +}; + +/* The SPFI device state structure, passed to all ROM driver methods. */ + +struct spifi_dev_s +{ + uint32_t base; + uint32_t regbase; + uint32_t devsize; + uint32_t memsize; + + uint8_t mfger; + uint8_t devtype; + uint8_t devid; + uint8_t busy; + + union + { + uint16_t h; + uint8_t b[2]; + } stat; + uint16_t reserved; + + uint16_t setprot; + uint16_t writeprot; + + uint32_t memcmd; + uint32_t progcmd; + + uint16_t sectors; + uint16_t protbytes; + + uint32_t opts; + uint32_t errcheck; + + uint8_t eraseshifts[4]; + uint8_t eraseops[4]; + + struct spfi_desc_s *protents; + char prot[SPIFI_LONGEST_PROTBLOCK]; +}; + +/* Operands of program and erase ROM driver methods */ + +struct spifi_operands_s +{ + char *dest; + uint32_t length; + char *scratch; + int32_t protect; + uint32_t options; +}; + +/* Interface to SPIFI ROM driver */ + +struct spifi_driver_s +{ + int32_t (*spifi_init)(struct spifi_dev_s *dev, uint32_t cshigh, + uint32_t options, uint32_t mhz); + int32_t (*spifi_program)(struct spifi_dev_s *dev, char *source, + struct spifi_operands_s *opers); + int32_t (*spifi_erase)(struct spifi_dev_s *dev, + struct spifi_operands_s *opers); + + /* Mode switching */ + + void (*cancel_mem_mode)(struct spifi_dev_s *dev); + void (*set_mem_mode)(struct spifi_dev_s *dev); + + /* Mid level functions */ + + int32_t (*checkAd)(struct spifi_dev_s *dev, + struct spifi_operands_s *opers); + int32_t (*setProt)(struct spifi_dev_s *dev, + struct spifi_operands_s *opers, char *change, char *saveprot); + int32_t (*check_block) (struct spifi_dev_s *dev, char *source, + struct spifi_operands_s *opers, uint32_t check_program); + int32_t (*send_erase_cmd)(struct spifi_dev_s *dev, uint8_t op, + uint32_t addr); + uint32_t (*ck_erase) (struct spifi_dev_s *dev, uint32_t *addr, + uint32_t length); + int32_t (*prog_block)(struct spifi_dev_s *dev, char *source, + struct spifi_operands_s *opers, uint32_t *left_in_page); + uint32_t (*ck_prog)(struct spifi_dev_s *dev, char *source, char *dest, + uint32_t length); + + /* Low level functions */ + + void (*setsize) (struct spifi_dev_s *dev, int32_t value); + int32_t (*setdev)(struct spifi_dev_s *dev, uint32_t opts, + uint32_t mem_cmd, uint32_t prog_cmd); + uint32_t (*cmd)(uint8_t op, uint8_t addrlen, uint8_t intLen, uint16_t len); + uint32_t (*readad)(struct spifi_dev_s *dev, uint32_t cmd, uint32_t addr); + void (*send04)(struct spifi_dev_s *dev, uint8_t op, uint8_t len, + uint32_t value); + void (*wren_sendad)(struct spifi_dev_s *dev, uint32_t cmd, + uint32_t addr, uint32_t value); + int32_t (*write_stat)(struct spifi_dev_s *dev, uint8_t len, + uint16_t value); + int32_t (*wait_busy)(struct spifi_dev_s *dev, uint8_t prog_or_erase); +}; + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +#endif /* __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_SPIFI_H */ + diff --git a/nuttx/arch/arm/src/lpc43xx/lpc43_debug.c b/nuttx/arch/arm/src/lpc43xx/lpc43_debug.c index 00e8ebc42..51cf94706 100644 --- a/nuttx/arch/arm/src/lpc43xx/lpc43_debug.c +++ b/nuttx/arch/arm/src/lpc43xx/lpc43_debug.c @@ -1,5 +1,5 @@ /**************************************************************************** - * arch/arm/src/lpc43/lpc43_pin_config.c + * arch/arm/src/lpc43/lpc43_debug.c * * Copyright (C) 2012 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> @@ -37,13 +37,15 @@ * Included Files ****************************************************************************/ -#include <arch/board/board.h> #include <nuttx/config.h> -#include <nuttx/arch.h> #include <errno.h> +#include <arch/board/board.h> + +#include "up_arch.h" #include "lpc43_pinconfig.h" +#include "lpc43_gpio.h" #ifdef CONFIG_DEBUG diff --git a/nuttx/arch/arm/src/lpc43xx/lpc43_spifi.c b/nuttx/arch/arm/src/lpc43xx/lpc43_spifi.c new file mode 100644 index 000000000..bd97cbd83 --- /dev/null +++ b/nuttx/arch/arm/src/lpc43xx/lpc43_spifi.c @@ -0,0 +1,320 @@ +/**************************************************************************** + * arch/arm/src/lpc43/lpc43_spifi.c + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <sys/types.h> +#include <errno.h> +#include <debug.h> + +#include <arch/irq.h> +#include <arch/board/board.h> + +#include "up_arch.h" + +#include "chip.h" +#include "lpc43_cgu.h" +#include "lpc43_spifi.h" +#include "lpc43_pinconfig.h" + +#ifdef CONFIG_LPC43_SPIFI + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* Select the divider to use as SPIFI input based on definitions in the + * board.h header file. + */ + +#if defined(BOARD_SPIFI_PLL1) +# define BASE_SPIFI_CLKSEL BASE_SPIFI_CLKSEL_PLL1 +#elif defined(BOARD_SPIFI_DIVA) +# define LPC43_IDIV_CTRL LPC43_IDIVA_CTRL +# define IDIV_CTRL_PD IDIVA_CTRL_PD +# define IDIV_CTRL_IDIV_MASK IDIVA_CTRL_IDIV_MASK +# define IDIV_CTRL_IDIV IDIVA_CTRL_IDIV(BOARD_SPIFI_DIVIDER) +# define IDIV_CTRL_IDIV_MAX 4 +# define IDIV_CTRL_CLKSEL_MASK IDIVA_CTRL_CLKSEL_MASK +# define IDIV_CTRL_CLKSEL_PLL1 (IDIVA_CLKSEL_PLL1 | IDIVA_CTRL_AUTOBLOCK) +# define BASE_SPIFI_CLKSEL BASE_SPIFI_CLKSEL_IDIVA +#elif defined(BOARD_SPIFI_DIVB) +# define LPC43_IDIV_CTRL LPC43_IDIVB_CTRL +# define IDIV_CTRL_PD IDIVBCD_CTRL_PD +# define IDIV_CTRL_IDIV_MASK IDIVBCD_CTRL_IDIV_MASK +# define IDIV_CTRL_IDIV IDIVBCD_CTRL_IDIV(BOARD_SPIFI_DIVIDER) +# define IDIV_CTRL_IDIV_MAX 16 +# define IDIV_CTRL_CLKSEL_MASK IDIVBCD_CTRL_CLKSEL_MASK +# define IDIV_CTRL_CLKSEL_PLL1 (IDIVBCD_CLKSEL_PLL1 | IDIVBCD_CTRL_AUTOBLOCK) +# define BASE_SPIFI_CLKSEL BASE_SPIFI_CLKSEL_IDIVB +#elif defined(BOARD_SPIFI_DIVC) +# define LPC43_IDIV_CTRL LPC43_IDIVC_CTRL +# define IDIV_CTRL_PD IDIVBCD_CTRL_PD +# define IDIV_CTRL_IDIV_MASK IDIVBCD_CTRL_IDIV_MASK +# define IDIV_CTRL_IDIV IDIVBCD_CTRL_IDIV(BOARD_SPIFI_DIVIDER) +# define IDIV_CTRL_IDIV_MAX 16 +# define IDIV_CTRL_CLKSEL_MASK IDIVBCD_CTRL_CLKSEL_MASK +# define IDIV_CTRL_CLKSEL_PLL1 (IDIVBCD_CLKSEL_PLL1 | IDIVBCD_CTRL_AUTOBLOCK) +# define BASE_SPIFI_CLKSEL BASE_SPIFI_CLKSEL_IDIVC +#elif defined(BOARD_SPIFI_DIVD) +# define LPC43_IDIV_CTRL LPC43_IDIVD_CTRL +# define IDIV_CTRL_PD IDIVBCD_CTRL_PD +# define IDIV_CTRL_IDIV_MASK IDIVBCD_CTRL_IDIV_MASK +# define IDIV_CTRL_IDIV IDIVBCD_CTRL_IDIV(BOARD_SPIFI_DIVIDER) +# define IDIV_CTRL_IDIV_MAX 16 +# define IDIV_CTRL_CLKSEL_MASK IDIVBCD_CTRL_CLKSEL_MASK +# define IDIV_CTRL_CLKSEL_PLL1 (IDIVBCD_CLKSEL_PLL1 | IDIVBCD_CTRL_AUTOBLOCK) +# define BASE_SPIFI_CLKSEL BASE_SPIFI_CLKSEL_IDIVD +#elif defined(BOARD_SPIFI_DIVE) +# define LPC43_IDIV_CTRL LPC43_IDIVE_CTRL +# define IDIV_CTRL_PD IDIVE_CTRL_PD +# define IDIV_CTRL_IDIV_MASK IDIVE_CTRL_IDIV_MASK +# define IDIV_CTRL_IDIV IDIVE_CTRL_IDIV(BOARD_SPIFI_DIVIDER) +# define IDIV_CTRL_IDIV_MAX 256 +# define IDIV_CTRL_CLKSEL_MASK IDIVE_CTRL_CLKSEL_MASK +# define IDIV_CTRL_CLKSEL_PLL1 (IDIVE_CLKSEL_PLL1 | IDIVE_CTRL_AUTOBLOCK) +# define BASE_SPIFI_CLKSEL BASE_SPIFI_CLKSEL_IDIVE +#endif + +#if BOARD_SPIFI_DIVIDER < 1 || BOARD_SPIFI_DIVIDER > IDIV_CTRL_IDIV_MAX +# error "Invalid value for BOARD_SPIFI_DIVIDER" +#endif + +/* The final parameter of the spifi_init() ROM driver call should be the + * serial clock rate divided by 1000000, rounded to an integer. The SPIFI + * supports transfer rates of up to SPIFI_CLK/2 bytes per second. The SPIF_CLK + * is the output of the LPC43_BASE_SPIFI_CLK configured above; The frequency should + * be given by BOARD_SPIFI_FREQUENCY as provided by the board.h header file. + */ + +#define SCLK_MHZ (BOARD_SPIFI_FREQUENCY + (1000000 / 2)) / 1000000 + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: spifi_idiv_input + * + * Description: + * Configure PLL1 as the input to the selected divider and enable the + * divider. + * + ****************************************************************************/ + +#ifndef BOARD_SPIFI_PLL1 +static inline void spifi_idiv_input(void) +{ + uint32_t regval; + + /* Configure PLL1 as the input to the selected divider */ + + regval = getreg32(LPC43_IDIV_CTRL); + regval &= ~IDIV_CTRL_CLKSEL_MASK; + regval |= IDIV_CTRL_CLKSEL_PLL1; + putreg32(regval, LPC43_IDIV_CTRL); + + /* Enable the divider (by making sure that the power down bit is clear) */ + + regval &= ~IDIV_CTRL_PD; + putreg32(regval, LPC43_IDIV_CTRL); + + /* Set the divider value */ + + regval &= ~IDIVA_CTRL_IDIV_MASK; + regval |= IDIV_CTRL_IDIV; + putreg32(regval, LPC43_IDIV_CTRL); +} +#else +# define spifi_idiv_input() +#endif + +/**************************************************************************** + * Name: spifi_spifi_input + * + * Description: + * Configure the selected divider (or PLL1) as the input to the SPIFI + * and enable the SPIFI clock. + * + ****************************************************************************/ + +static inline void spifi_spifi_input(void) +{ + uint32_t regval; + + /* Configure the selected divider (or PLL1) as the input to the SPIFI */ + + regval = getreg32(LPC43_BASE_SPIFI_CLK); + regval &= ~BASE_SPIFI_CLK_CLKSEL_MASK; + regval |= BASE_SPIFI_CLKSEL; + putreg32(regval, LPC43_BASE_SPIFI_CLK); + + /* Enable the SPIFI clocking (by making sure that the power down bit is + * clear) + */ + + regval &= ~IDIVA_CTRL_PD; + putreg32(regval, LPC43_BASE_SPIFI_CLK); +} + +/**************************************************************************** + * Name: spifi_pinconfig + * + * Description: + * Configure SPIFI pins + * + ****************************************************************************/ + +static inline void spifi_pinconfig(void) +{ + /* Configure SPIFI pins */ + + lpc43_pin_config(PINCONF_SPIFI_CS); /* Input buffering not needed */ + lpc43_pin_config(PINCONF_SPIFI_MISO); /* High drive for SCLK */ + lpc43_pin_config(PINCONF_SPIFI_MOSI); + lpc43_pin_config(PINCONF_SPIFI_SCK); + lpc43_pin_config(PINCONF_SPIFI_SIO2); + lpc43_pin_config(PINCONF_SPIFI_SIO3); +} + +/**************************************************************************** + * Name: spifi_rominit + * + * Description: + * Initialize the SPIFI ROM driver + * + ****************************************************************************/ + +static inline int spifi_rominit(void) +{ + struct spifi_driver_s *pspifi = *((struct spifi_driver_s **)SPIFI_ROM_PTR); + struct spifi_dev_s dev; + int32_t result; + + /* The final parameter of the spifi_init() ROM driver call should be the + * serial clock rate divided by 1000000, rounded to an integer. The SPIFI + * supports transfer rates of up to SPIFI_CLK/2 bytes per second. The SPIF_CLK + * is the output of the LPC43_BASE_SPIFI_CLK configured above; The frequency should + * be given by BOARD_SPIFI_FREQUENCY as provided by the board.h header file. + * + * A return value of zero frp spifi_init() indicates success. Non-zero error + * codes include: + * + * 0x2000A No operative serial flash (JEDEC ID all zeroes or all ones) + * 0x20009 Unknown manufacturer code + * 0x20008 Unknown device type code + * 0x20007 Unknown device ID code + * 0x20006 Unknown extended device ID value (only for Spansion 25FL12x + * in the initial API) + * 0x20005 Device status error + * 0x20004 Operand error: S_MODE3+S_FULLCLK+S_RCVCLK in options + */ + + result = pspifi->spifi_init(&dev, 9, SPIFI_RCVCLK | SPIFI_FULLCLK, SCLK_MHZ); + if (result != 0) + { + fdbg("ERROR: spifi_init failed: %05x\n", result); + + /* Try again */ + + result = pspifi->spifi_init(&dev, 9, SPIFI_RCVCLK | SPIFI_FULLCLK, SCLK_MHZ); + if (result != 0) + { + fdbg("ERROR: spifi_init failed: %05x\n", result); + return -ENODEV; + } + } + + return OK; +} + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Function: lpc43_spifi_initialize + * + * Description: + * Initialize the SPIFI interface per settings in the board.h file + * + * Input Parameters: + * None + * + * Returned Value: + * Zero is returned on success; on failure, a negated errno value is + * returned. + * + ****************************************************************************/ + +int lpc43_spifi_initialize(void) +{ + irqstate_t flags; + int ret = OK; + + flags = irqsave(); + + /* The SPIFI will receive clocking from a divider per the settings + * provided in the board.h file. Configure PLL1 as the input clock + * for the selected divider + */ + + spifi_idiv_input(); + + /* Configure SPIFI to received clocking from the selected divider */ + + spifi_spifi_input(); + + /* Configure SPIFI pins */ + + spifi_pinconfig(); + + + /* Initialize the SPIFI ROM driver */ + + ret = spifi_rominit(); + irqrestore(flags); + return ret; +} + +#endif /* CONFIG_LPC43_SPIFI */ diff --git a/nuttx/arch/arm/src/lpc43xx/lpc43_spifi.h b/nuttx/arch/arm/src/lpc43xx/lpc43_spifi.h new file mode 100644 index 000000000..7ab1255c9 --- /dev/null +++ b/nuttx/arch/arm/src/lpc43xx/lpc43_spifi.h @@ -0,0 +1,84 @@ +/**************************************************************************** + * arch/arm/src/lpc43/lpc43_spifi.h + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#ifndef __ARCH_ARM_SRC_LPC43XX_LPC43_SPIFI_H +#define __ARCH_ARM_SRC_LPC43XX_LPC43_SPIFI_H + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include "chip.h" +#include "chip/lpc43_spifi.h" + +#ifdef CONFIG_LPC43_SPIFI + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ +/**************************************************************************** + * Function: lpc43_spifi_initialize + * + * Description: + * Initialize the SPIFI interface per settings in the board.h file + * + * Input Parameters: + * None + * + * Returned Value: + * Zero is returned on success; on failure, a negated errno value is + * returned. + * + ****************************************************************************/ + +int lpc43_spifi_initialize(void); + +#endif /* CONFIG_LPC43_SPIFI */ +#endif /* __ARCH_ARM_SRC_LPC43XX_LPC43_SPIFI_H */ + diff --git a/nuttx/configs/lpc4330-xplorer/README.txt b/nuttx/configs/lpc4330-xplorer/README.txt index 13805c0b1..68fe3f396 100644 --- a/nuttx/configs/lpc4330-xplorer/README.txt +++ b/nuttx/configs/lpc4330-xplorer/README.txt @@ -901,7 +901,8 @@ Where <subdir> is one of the following: CONFIG_LPC32_CODEREDW=y : Code Red under Windows This configuration has some special options that can be used to - create a block device on the SPIFI FLASH: + create a block device on the SPIFI FLASH. NOTE: CONFIG_LPC43_SPIFI=y + must also be defined to enable SPIFI setup support: CONFIG_SPIFI_BLKDRVR - Enable to create a block driver on the SPFI device. diff --git a/nuttx/configs/lpc4330-xplorer/include/board.h b/nuttx/configs/lpc4330-xplorer/include/board.h index 6901b8d16..052c1a97f 100644 --- a/nuttx/configs/lpc4330-xplorer/include/board.h +++ b/nuttx/configs/lpc4330-xplorer/include/board.h @@ -151,6 +151,36 @@ #define LPC43_CCLK BOARD_FCLKOUT_FREQUENCY +/* SPIFI clocking **********************************************************/ +/* The SPIFI will receive clocking from a divider per the settings provided + * in this file. The NuttX code will configure PLL1 as the input clock + * for the selected divider + */ + +#if BOARD_FCLKOUT_FREQUENCY < 120000000 +# define BOARD_SPIFI_PLL1 1 /* Use PLL1 directly */ +# undef BOARD_SPIFI_DIVA +#else +# undef BOARD_SPIFI_PLL1 +# define BOARD_SPIFI_DIVA 1 /* Use IDIVA */ +#endif + +#undef BOARD_SPIFI_DIVB +#undef BOARD_SPIFI_DIVC +#undef BOARD_SPIFI_DIVD +#undef BOARD_SPIFI_DIVE + +/* We need to configure the divider so that its output is as close to 120MHz + * without exceeding that value. + */ + +#if BOARD_FCLKOUT_FREQUENCY < 120000000 +# define BOARD_SPIFI_FREQUENCY BOARD_FCLKOUT_FREQUENCY /* 72Mhz? */ +#else +# define BOARD_SPIFI_DIVIDER (2) /* 204MHz / 2 = 102MHz */ +# define BOARD_SPIFI_FREQUENCY (102000000) /* 204MHz / 2 = 102MHz */ +#endif + /* UART clocking ***********************************************************/ /* Configure all U[S]ARTs to use the XTAL input frequency */ diff --git a/nuttx/configs/lpc4330-xplorer/nsh/defconfig b/nuttx/configs/lpc4330-xplorer/nsh/defconfig index 8ab5e33ac..de4d3ff09 100644 --- a/nuttx/configs/lpc4330-xplorer/nsh/defconfig +++ b/nuttx/configs/lpc4330-xplorer/nsh/defconfig @@ -659,7 +659,8 @@ CONFIG_MMCSD_HAVECARDDETECT=n # # This configuration has some special options that can be used to -# create a block device on the SPIFI FLASH: +# create a block device on the SPIFI FLASH. NOTE: CONFIG_LPC43_SPIFI=y +# must also be defined to enable SPIFI setup support: # # CONFIG_SPIFI_BLKDRVR - Enable to create a block driver on the SPFI # device. diff --git a/nuttx/configs/lpc4330-xplorer/src/up_nsh.c b/nuttx/configs/lpc4330-xplorer/src/up_nsh.c index c9284ab5b..032c133f0 100644 --- a/nuttx/configs/lpc4330-xplorer/src/up_nsh.c +++ b/nuttx/configs/lpc4330-xplorer/src/up_nsh.c @@ -44,39 +44,31 @@ #include <debug.h> #include <errno.h> -/* This should be removed someday when we are confident in SPIFI */ - -#ifdef CONFIG_DEBUG_FS -# include "up_arch.h" -# include "chip/lpc43_cgu.h" -# include "chip/lpc43_ccu.h" -#endif - -#include "chip.h" #include <nuttx/ramdisk.h> -/**************************************************************************** - * Pre-Processor Definitions - ****************************************************************************/ -/* USB Configuration ********************************************************/ - -/* PORT and SLOT number probably depend on the board configuration */ +#include "chip.h" -#ifdef CONFIG_ARCH_BOARD_LPC4330_XPLORER -# define CONFIG_NSH_HAVEUSBDEV 1 -#else -# error "Unrecognized board" -# undef CONFIG_NSH_HAVEUSBDEV -#endif +#ifdef CONFIG_SPIFI_BLKDRVR +# include "lpc43_spifi.h" -/* Can't support USB features if USB is not enabled */ + /* This should be removed someday when we are confident in SPIFI */ -#ifndef CONFIG_USBDEV -# undef CONFIG_NSH_HAVEUSBDEV +# ifdef CONFIG_DEBUG_FS +# include "up_arch.h" +# include "chip/lpc43_cgu.h" +# include "chip/lpc43_ccu.h" +# endif #endif +/**************************************************************************** + * Pre-Processor Definitions + ****************************************************************************/ /* SPIFI Configuration ******************************************************/ -/* CONFIG_SPIFI_BLKDRVR - Enable to create a block driver on the SPFI device. +/* This logic supports some special options that can be used to create a + * block device on the SPIFI FLASH. NOTE: CONFIG_LPC43_SPIFI=y must also + * be defined to enable SPIFI setup support: + * + * CONFIG_SPIFI_BLKDRVR - Enable to create a block driver on the SPFI device. * CONFIG_SPIFI_DEVNO - SPIFI minor device number. The SPFI device will be * at /dev/ramN, where N is the value of CONFIG_SPIFI_DEVNO. Default: 0. * CONFIG_SPIFI_RDONLY - Create a read only device on SPIFI. @@ -95,22 +87,31 @@ */ #ifdef CONFIG_SPIFI_BLKDRVR + +# ifndef CONFIG_LPC43_SPIFI=n +# error "SPIFI support is not enabled (CONFIG_LPC43_SPIFI)" +# endif + # ifndef CONFIG_SPIFI_DEVNO # define CONFIG_SPIFI_DEVNO 0 # endif + # ifndef CONFIG_SPIFI_OFFSET # define CONFIG_SPIFI_OFFSET 0 # endif + # ifndef CONFIG_SPIFI_BLKSIZE # define CONFIG_SPIFI_BLKSIZE 512 # endif + # ifndef CONFIG_SPIFI_NBLOCKS # error "Need number of SPIFI blocks (CONFIG_SPIFI_NBLOCKS)" # endif -#endif -#define SPIFI_BUFFER \ - (FAR uint8_t *)(LPC43_LOCSRAM_SPIFI_BASE + CONFIG_SPIFI_OFFSET) +# define SPIFI_BUFFER \ + (FAR uint8_t *)(LPC43_LOCSRAM_SPIFI_BASE + CONFIG_SPIFI_OFFSET) + +#endif /* Debug ********************************************************************/ @@ -151,6 +152,17 @@ #ifdef CONFIG_SPIFI_BLKDRVR static int nsh_spifi_initialize(void) { + int ret; + + /* Initialize the SPIFI interface */ + + ret = lpc43_spifi_initialize(); + if (ret < 0) + { + fdbg("ERROR: lpc43_spifi_initialize failed: %d\n", ret); + return ret; + } + /* This should be removed someday when we are confident in SPIFI */ #ifdef CONFIG_DEBUG_FS diff --git a/nuttx/configs/lpcxpresso-lpc1768/README.txt b/nuttx/configs/lpcxpresso-lpc1768/README.txt index b0ead543f..5632d0e82 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/README.txt +++ b/nuttx/configs/lpcxpresso-lpc1768/README.txt @@ -646,18 +646,18 @@ LPCXpresso Configuration Options LPC17xx specific CAN device driver settings. These settings all require CONFIG_CAN: - CONFIG_CAN_EXTID - Enables support for the 29-bit extended ID. Default - Standard 11-bit IDs. - CONFIG_CAN1_BAUD - CAN1 BAUD rate. Required if CONFIG_LPC17_CAN1 is defined. - CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_LPC17_CAN2 is defined. - CONFIG_CAN1_DIVISOR - CAN1 is clocked at CCLK divided by this number. - (the CCLK frequency is divided by this number to get the CAN clock). - Options = {1,2,4,6}. Default: 4. - CONFIG_CAN2_DIVISOR - CAN2 is clocked at CCLK divided by this number. - (the CCLK frequency is divided by this number to get the CAN clock). - Options = {1,2,4,6}. Default: 4. - CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6 - CONFIG_CAN_TSEG2 = the number of CAN time quanta in segment 2. Default: 7 + CONFIG_CAN_EXTID - Enables support for the 29-bit extended ID. Default + Standard 11-bit IDs. + CONFIG_CAN1_BAUD - CAN1 BAUD rate. Required if CONFIG_LPC17_CAN1 is defined. + CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_LPC17_CAN2 is defined. + CONFIG_CAN1_DIVISOR - CAN1 is clocked at CCLK divided by this number. + (the CCLK frequency is divided by this number to get the CAN clock). + Options = {1,2,4,6}. Default: 4. + CONFIG_CAN2_DIVISOR - CAN2 is clocked at CCLK divided by this number. + (the CCLK frequency is divided by this number to get the CAN clock). + Options = {1,2,4,6}. Default: 4. + CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6 + CONFIG_CAN_TSEG2 = the number of CAN time quanta in segment 2. Default: 7 LPC17xx specific PHY/Ethernet device driver settings. These setting also require CONFIG_NET and CONFIG_LPC17_ETHERNET. @@ -787,10 +787,10 @@ Where <subdir> is one of the following: class driver at apps/examples/usbstorage. See apps/examples/README.txt for more information. - NOTE: At present, the value for the SD SPI frequency is too - high and the SD will fail. Setting that frequency to 400000 - removes the problem. TODO: Tune this frequency to some optimal - value. + NOTE: At present, the value for the SD SPI frequency is too + high and the SD will fail. Setting that frequency to 400000 + removes the problem. TODO: Tune this frequency to some optimal + value. Jumpers: J55 must be set to provide chip select PIO1_11 signal as the SD slot chip select. |