diff options
Diffstat (limited to 'nuttx')
-rw-r--r-- | nuttx/arch/arm/src/kinetis/kinetis_irq.c | 6 | ||||
-rw-r--r-- | nuttx/arch/arm/src/lm3s/lm3s_irq.c | 6 | ||||
-rw-r--r-- | nuttx/arch/arm/src/lpc17xx/lpc17_irq.c | 6 | ||||
-rw-r--r-- | nuttx/arch/arm/src/lpc43xx/Make.defs | 8 | ||||
-rw-r--r-- | nuttx/arch/arm/src/lpc43xx/lpc43_clockconfig.h | 89 | ||||
-rw-r--r-- | nuttx/arch/arm/src/lpc43xx/lpc43_idle.c | 187 | ||||
-rw-r--r-- | nuttx/arch/arm/src/lpc43xx/lpc43_irq.c | 487 | ||||
-rw-r--r-- | nuttx/arch/arm/src/lpc43xx/lpc43_lowputc.h | 88 | ||||
-rw-r--r-- | nuttx/arch/arm/src/lpc43xx/lpc43_start.c | 231 | ||||
-rw-r--r-- | nuttx/arch/arm/src/sam3u/sam3u_irq.c | 6 | ||||
-rw-r--r-- | nuttx/arch/arm/src/stm32/stm32_irq.c | 6 |
11 files changed, 1089 insertions, 31 deletions
diff --git a/nuttx/arch/arm/src/kinetis/kinetis_irq.c b/nuttx/arch/arm/src/kinetis/kinetis_irq.c index f89c63584..308afcb97 100644 --- a/nuttx/arch/arm/src/kinetis/kinetis_irq.c +++ b/nuttx/arch/arm/src/kinetis/kinetis_irq.c @@ -385,12 +385,6 @@ void up_irqinitialize(void) kinetis_dumpnvic("initial", NR_IRQS); - /* Initialize FIQs */ - -#ifdef CONFIG_ARCH_FIQ - up_fiqinitialize(); -#endif - /* Initialize logic to support a second level of interrupt decoding for * configured pin interrupts. */ diff --git a/nuttx/arch/arm/src/lm3s/lm3s_irq.c b/nuttx/arch/arm/src/lm3s/lm3s_irq.c index b026a8303..d129f50cf 100644 --- a/nuttx/arch/arm/src/lm3s/lm3s_irq.c +++ b/nuttx/arch/arm/src/lm3s/lm3s_irq.c @@ -343,12 +343,6 @@ void up_irqinitialize(void) #ifndef CONFIG_SUPPRESS_INTERRUPTS - /* Initialize FIQs */ - -#ifdef CONFIG_ARCH_FIQ - up_fiqinitialize(); -#endif - /* And finally, enable interrupts */ setbasepri(NVIC_SYSH_PRIORITY_MAX); diff --git a/nuttx/arch/arm/src/lpc17xx/lpc17_irq.c b/nuttx/arch/arm/src/lpc17xx/lpc17_irq.c index 1588142a2..8af2adafe 100644 --- a/nuttx/arch/arm/src/lpc17xx/lpc17_irq.c +++ b/nuttx/arch/arm/src/lpc17xx/lpc17_irq.c @@ -329,12 +329,6 @@ void up_irqinitialize(void) lpc17_dumpnvic("initial", LPC17_IRQ_NIRQS); - /* Initialize FIQs */ - -#ifdef CONFIG_ARCH_FIQ - up_fiqinitialize(); -#endif - /* Initialize logic to support a second level of interrupt decoding for * GPIO pins. */ diff --git a/nuttx/arch/arm/src/lpc43xx/Make.defs b/nuttx/arch/arm/src/lpc43xx/Make.defs index d2a4eb746..ea86ed1a4 100644 --- a/nuttx/arch/arm/src/lpc43xx/Make.defs +++ b/nuttx/arch/arm/src/lpc43xx/Make.defs @@ -58,4 +58,10 @@ CMN_ASRCS += up_fpu.S endif CHIP_ASRCS = -CHIP_CSRCS = +CHIP_CSRCS = lpc43_irq.c lpc43_start.c + +ifneq ($(CONFIG_IDLE_CUSTOM),y) +CHIP_CSRCS += lpc43_idle.c +endif + + diff --git a/nuttx/arch/arm/src/lpc43xx/lpc43_clockconfig.h b/nuttx/arch/arm/src/lpc43xx/lpc43_clockconfig.h new file mode 100644 index 000000000..f70a9b7e2 --- /dev/null +++ b/nuttx/arch/arm/src/lpc43xx/lpc43_clockconfig.h @@ -0,0 +1,89 @@ +/************************************************************************************ + * arch/arm/src/lpc43xx/lpc43_clockconfig.h + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __ARCH_ARM_SRC_LPC43XX_CLOCKCONFIG_H +#define __ARCH_ARM_SRC_LPC43XX_CLOCKCONFIG_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +/************************************************************************************ + * Public Types + ************************************************************************************/ + +/************************************************************************************ + * Public Data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" { +#else +#define EXTERN extern +#endif + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: lpc43_clockconfig + * + * Description: + * Called to initialize the LPC43XX. This does whatever setup is needed to put the + * MCU in a usable state. This includes the initialization of clocking using the + * settings in board.h. + * + ************************************************************************************/ + +EXTERN void lpc43_clockconfig(void); + +#undef EXTERN +#if defined(__cplusplus) +} +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __ARCH_ARM_SRC_LPC43XX_CLOCKCONFIG_H */ diff --git a/nuttx/arch/arm/src/lpc43xx/lpc43_idle.c b/nuttx/arch/arm/src/lpc43xx/lpc43_idle.c new file mode 100644 index 000000000..72541eed8 --- /dev/null +++ b/nuttx/arch/arm/src/lpc43xx/lpc43_idle.c @@ -0,0 +1,187 @@ +/**************************************************************************** + * arch/arm/src/lpc43/lpc43_idle.c + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <arch/board/board.h> +#include <nuttx/config.h> + +#include <nuttx/arch.h> +#include <nuttx/power/pm.h> + +#include <arch/irq.h> + +#include "up_internal.h" + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* Does the board support an IDLE LED to indicate that the board is in the + * IDLE state? + */ + +#if defined(CONFIG_ARCH_LEDS) && defined(LED_IDLE) +# define BEGIN_IDLE() up_ledon(LED_IDLE) +# define END_IDLE() up_ledoff(LED_IDLE) +#else +# define BEGIN_IDLE() +# define END_IDLE() +#endif + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_idlepm + * + * Description: + * Perform IDLE state power management. + * + ****************************************************************************/ + +#ifdef CONFIG_PM +static void up_idlepm(void) +{ + static enum pm_state_e oldstate = PM_NORMAL; + enum pm_state_e newstate; + irqstate_t flags; + int ret; + + /* Decide, which power saving level can be obtained */ + + newstate = pm_checkstate(); + + /* Check for state changes */ + + if (newstate != oldstate) + { + flags = irqsave(); + + /* Perform board-specific, state-dependent logic here */ + + llvdbg("newstate= %d oldstate=%d\n", newstate, oldstate); + + /* Then force the global state change */ + + ret = pm_changestate(newstate); + if (ret < 0) + { + /* The new state change failed, revert to the preceding state */ + + (void)pm_changestate(oldstate); + } + else + { + /* Save the new state */ + + oldstate = newstate; + } + + /* MCU-specific power management logic */ + + switch (newstate) + { + case PM_NORMAL: + break; + + case PM_IDLE: + break; + + case PM_STANDBY: + lpc43_pmstandby(true); + break; + + case PM_SLEEP: + (void)lpc43_pmsleep(); + break; + + default: + break; + } + + irqrestore(flags); + } +} +#else +# define up_idlepm() +#endif + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_idle + * + * Description: + * up_idle() is the logic that will be executed when their is no other + * ready-to-run task. This is processor idle time and will continue until + * some interrupt occurs to cause a context switch from the idle task. + * + * Processing in this state may be processor-specific. e.g., this is where + * power management operations might be performed. + * + ****************************************************************************/ + +void up_idle(void) +{ +#if defined(CONFIG_SUPPRESS_INTERRUPTS) || defined(CONFIG_SUPPRESS_TIMER_INTS) + /* If the system is idle and there are no timer interrupts, then process + * "fake" timer interrupts. Hopefully, something will wake up. + */ + + sched_process_timer(); +#else + + /* Perform IDLE mode power management */ + + up_idlepm(); + + /* Sleep until an interrupt occurs to save power */ + + BEGIN_IDLE(); + asm("WFI"); + END_IDLE(); +#endif +} + diff --git a/nuttx/arch/arm/src/lpc43xx/lpc43_irq.c b/nuttx/arch/arm/src/lpc43xx/lpc43_irq.c new file mode 100644 index 000000000..40c1496f8 --- /dev/null +++ b/nuttx/arch/arm/src/lpc43xx/lpc43_irq.c @@ -0,0 +1,487 @@ +/**************************************************************************** + * arch/arm/src/lpc43/lpc43_irq.c + * arch/arm/src/chip/lpc43_irq.c + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <stdint.h> +#include <debug.h> + +#include <nuttx/irq.h> +#include <nuttx/arch.h> +#include <arch/irq.h> + +#include "chip.h" +#include "nvic.h" +#include "up_arch.h" +#include "os_internal.h" +#include "up_internal.h" + +/**************************************************************************** + * Definitions + ****************************************************************************/ + +/* Get a 32-bit version of the default priority */ + +#define DEFPRIORITY32 \ + (LPC43M4_SYSH_PRIORITY_DEFAULT << 24 |\ + LPC43M4_SYSH_PRIORITY_DEFAULT << 16 |\ + LPC43M4_SYSH_PRIORITY_DEFAULT << 8 |\ + LPC43M4_SYSH_PRIORITY_DEFAULT) + +/**************************************************************************** + * Public Data + ****************************************************************************/ + +volatile uint32_t *current_regs; + +/* This is the address of the vector table */ + +extern unsigned _vectors[]; + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: lpc43_dumpnvic + * + * Description: + * Dump some interesting NVIC registers + * + ****************************************************************************/ + +#if defined(CONFIG_DEBUG_IRQ) && defined (CONFIG_DEBUG) +static void lpc43_dumpnvic(const char *msg, int irq) +{ + irqstate_t flags; + + flags = irqsave(); + slldbg("NVIC (%s, irq=%d):\n", msg, irq); + slldbg(" INTCTRL: %08x VECTAB: %08x\n", + getreg32(NVIC_INTCTRL), getreg32(NVIC_VECTAB)); +#if 0 + slldbg(" SYSH ENABLE MEMFAULT: %08x BUSFAULT: %08x USGFAULT: %08x SYSTICK: %08x\n", + getreg32(NVIC_SYSHCON_MEMFAULTENA), getreg32(NVIC_SYSHCON_BUSFAULTENA), + getreg32(NVIC_SYSHCON_USGFAULTENA), getreg32(NVIC_SYSTICK_CTRL_ENABLE)); +#endif + slldbg(" IRQ ENABLE: %08x %08x\n", + getreg32(NVIC_IRQ0_31_ENABLE), getreg32(NVIC_IRQ32_63_ENABLE)); + slldbg(" SYSH_PRIO: %08x %08x %08x\n", + getreg32(NVIC_SYSH4_7_PRIORITY), getreg32(NVIC_SYSH8_11_PRIORITY), + getreg32(NVIC_SYSH12_15_PRIORITY)); + slldbg(" IRQ PRIO: %08x %08x %08x %08x\n", + getreg32(NVIC_IRQ0_3_PRIORITY), getreg32(NVIC_IRQ4_7_PRIORITY), + getreg32(NVIC_IRQ8_11_PRIORITY), getreg32(NVIC_IRQ12_15_PRIORITY)); + slldbg(" %08x %08x %08x %08x\n", + getreg32(NVIC_IRQ16_19_PRIORITY), getreg32(NVIC_IRQ20_23_PRIORITY), + getreg32(NVIC_IRQ24_27_PRIORITY), getreg32(NVIC_IRQ28_31_PRIORITY)); + slldbg(" %08x %08x %08x %08x\n", + getreg32(NVIC_IRQ32_35_PRIORITY), getreg32(NVIC_IRQ36_39_PRIORITY), + getreg32(NVIC_IRQ40_43_PRIORITY), getreg32(NVIC_IRQ44_47_PRIORITY)); + slldbg(" %08x %08x %08x\n", + getreg32(NVIC_IRQ48_51_PRIORITY), getreg32(NVIC_IRQ52_55_PRIORITY), + getreg32(NVIC_IRQ56_59_PRIORITY)); + irqrestore(flags); +} +#else +# define lpc43_dumpnvic(msg, irq) +#endif + +/**************************************************************************** + * Name: lpc43_nmi, lpc43_busfault, lpc43_usagefault, lpc43_pendsv, + * lpc43_dbgmonitor, lpc43_pendsv, lpc43_reserved + * + * Description: + * Handlers for various execptions. None are handled and all are fatal + * error conditions. The only advantage these provided over the default + * unexpected interrupt handler is that they provide a diagnostic output. + * + ****************************************************************************/ + +#ifdef CONFIG_DEBUG +static int lpc43_nmi(int irq, FAR void *context) +{ + (void)irqsave(); + dbg("PANIC!!! NMI received\n"); + PANIC(OSERR_UNEXPECTEDISR); + return 0; +} + +static int lpc43_busfault(int irq, FAR void *context) +{ + (void)irqsave(); + dbg("PANIC!!! Bus fault recived\n"); + PANIC(OSERR_UNEXPECTEDISR); + return 0; +} + +static int lpc43_usagefault(int irq, FAR void *context) +{ + (void)irqsave(); + dbg("PANIC!!! Usage fault received\n"); + PANIC(OSERR_UNEXPECTEDISR); + return 0; +} + +static int lpc43_pendsv(int irq, FAR void *context) +{ + (void)irqsave(); + dbg("PANIC!!! PendSV received\n"); + PANIC(OSERR_UNEXPECTEDISR); + return 0; +} + +static int lpc43_dbgmonitor(int irq, FAR void *context) +{ + (void)irqsave(); + dbg("PANIC!!! Debug Monitor receieved\n"); + PANIC(OSERR_UNEXPECTEDISR); + return 0; +} + +static int lpc43_reserved(int irq, FAR void *context) +{ + (void)irqsave(); + dbg("PANIC!!! Reserved interrupt\n"); + PANIC(OSERR_UNEXPECTEDISR); + return 0; +} +#endif + +/**************************************************************************** + * Name: lpc43_irqinfo + * + * Description: + * Given an IRQ number, provide the register and bit setting to enable or + * disable the irq. + * + ****************************************************************************/ + +static int lpc43_irqinfo(int irq, uint32_t *regaddr, uint32_t *bit) +{ + DEBUGASSERT(irq >= LPC43_IRQ_NMI && irq < NR_IRQS); + + /* Check for external interrupt */ + + if (irq >= LPC43_IRQ_EXTINT) + { + if (irq < (LPC43_IRQ_EXTINT + 32)) + { + *regaddr = NVIC_IRQ0_31_ENABLE; + *bit = 1 << (irq - LPC43_IRQ_EXTINT); + } + else if (irq < LPC43M4_IRQ_NIRQS) + { + *regaddr = NVIC_IRQ32_63_ENABLE; + *bit = 1 << (irq - LPC43_IRQ_EXTINT - 32); + } + else + { + return ERROR; /* Invalid interrupt */ + } + } + + /* Handle processor exceptions. Only a few can be disabled */ + + else + { + *regaddr = NVIC_SYSHCON; + if (irq == LPC43_IRQ_MEMFAULT) + { + *bit = NVIC_SYSHCON_MEMFAULTENA; + } + else if (irq == LPC43_IRQ_BUSFAULT) + { + *bit = NVIC_SYSHCON_BUSFAULTENA; + } + else if (irq == LPC43_IRQ_USAGEFAULT) + { + *bit = NVIC_SYSHCON_USGFAULTENA; + } + else if (irq == LPC43_IRQ_SYSTICK) + { + *regaddr = NVIC_SYSTICK_CTRL; + *bit = NVIC_SYSTICK_CTRL_ENABLE; + } + else + { + return ERROR; /* Invalid or unsupported exception */ + } + } + + return OK; +} + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_irqinitialize + ****************************************************************************/ + +void up_irqinitialize(void) +{ + uint32_t regaddr; + int num_priority_registers; + + /* Disable all interrupts */ + + putreg32(0, NVIC_IRQ0_31_ENABLE); + putreg32(0, NVIC_IRQ32_63_ENABLE); + + /* Make sure that we are using the correct vector table */ + + putreg32((uint32_t)_vectors, NVIC_VECTAB); + + /* Set all interrupts (and exceptions) to the default priority */ + + putreg32(DEFPRIORITY32, NVIC_SYSH4_7_PRIORITY); + putreg32(DEFPRIORITY32, NVIC_SYSH8_11_PRIORITY); + putreg32(DEFPRIORITY32, NVIC_SYSH12_15_PRIORITY); + + /* The NVIC ICTR register (bits 0-4) holds the number of of interrupt + * lines that the NVIC supports: + * + * 0 -> 32 interrupt lines, 8 priority registers + * 1 -> 64 " " " ", 16 priority registers + * 2 -> 96 " " " ", 32 priority registers + * ... + */ + + num_priority_registers = (getreg32(NVIC_ICTR) + 1) * 8; + + /* Now set all of the interrupt lines to the default priority */ + + regaddr = NVIC_IRQ0_3_PRIORITY; + while (num_priority_registers--) + { + putreg32(DEFPRIORITY32, regaddr); + regaddr += 4; + } + + /* currents_regs is non-NULL only while processing an interrupt */ + + current_regs = NULL; + + /* Attach the SVCall and Hard Fault exception handlers. The SVCall + * exception is used for performing context switches; The Hard Fault + * must also be caught because a SVCall may show up as a Hard Fault + * under certain conditions. + */ + + irq_attach(LPC43_IRQ_SVCALL, up_svcall); + irq_attach(LPC43_IRQ_HARDFAULT, up_hardfault); + + /* Set the priority of the SVCall interrupt */ + +#ifdef CONFIG_ARCH_IRQPRIO +/* up_prioritize_irq(LPC43_IRQ_PENDSV, NVIC_SYSH_PRIORITY_MIN); */ +#endif + + /* If the MPU is enabled, then attach and enable the Memory Management + * Fault handler. + */ + +#ifdef CONFIG_ARMV7M_MPU + irq_attach(LPC43_IRQ_MEMFAULT, up_memfault); + up_enable_irq(LPC43_IRQ_MEMFAULT); +#endif + + /* Attach all other processor exceptions (except reset and sys tick) */ + +#ifdef CONFIG_DEBUG + irq_attach(LPC43_IRQ_NMI, lpc43_nmi); +#ifndef CONFIG_ARMV7M_MPU + irq_attach(LPC43_IRQ_MEMFAULT, up_memfault); +#endif + irq_attach(LPC43_IRQ_BUSFAULT, lpc43_busfault); + irq_attach(LPC43_IRQ_USAGEFAULT, lpc43_usagefault); + irq_attach(LPC43_IRQ_PENDSV, lpc43_pendsv); + irq_attach(LPC43_IRQ_DBGMONITOR, lpc43_dbgmonitor); + irq_attach(LPC43_IRQ_RESERVED, lpc43_reserved); +#endif + + lpc43_dumpnvic("initial", LPC43M4_IRQ_NIRQS); + + /* Initialize logic to support a second level of interrupt decoding for + * GPIO pins. + */ + +#ifdef CONFIG_GPIO_IRQ + lpc43_gpioirqinitialize(); +#endif + + /* And finally, enable interrupts */ + +#ifndef CONFIG_SUPPRESS_INTERRUPTS + setbasepri(LPC43M4_SYSH_PRIORITY_MAX); + irqrestore(0); +#endif +} + +/**************************************************************************** + * Name: up_disable_irq + * + * Description: + * Disable the IRQ specified by 'irq' + * + ****************************************************************************/ + +void up_disable_irq(int irq) +{ + uint32_t regaddr; + uint32_t regval; + uint32_t bit; + + if (lpc43_irqinfo(irq, ®addr, &bit) == 0) + { + /* Clear the appropriate bit in the register to enable the interrupt */ + + regval = getreg32(regaddr); + regval &= ~bit; + putreg32(regval, regaddr); + } +#ifdef CONFIG_GPIO_IRQ + else if (irq >= LPC43_VALID_FIRST0L) + { + /* Maybe it is a (derived) GPIO IRQ */ + + lpc43_gpioirqdisable(irq); + } +#endif + lpc43_dumpnvic("disable", irq); +} + +/**************************************************************************** + * Name: up_enable_irq + * + * Description: + * Enable the IRQ specified by 'irq' + * + ****************************************************************************/ + +void up_enable_irq(int irq) +{ + uint32_t regaddr; + uint32_t regval; + uint32_t bit; + + if (lpc43_irqinfo(irq, ®addr, &bit) == 0) + { + /* Set the appropriate bit in the register to enable the interrupt */ + + regval = getreg32(regaddr); + regval |= bit; + putreg32(regval, regaddr); + } +#ifdef CONFIG_GPIO_IRQ + else if (irq >= LPC43_VALID_FIRST0L) + { + /* Maybe it is a (derived) GPIO IRQ */ + + lpc43_gpioirqenable(irq); + } +#endif + lpc43_dumpnvic("enable", irq); +} + +/**************************************************************************** + * Name: up_maskack_irq + * + * Description: + * Mask the IRQ and acknowledge it + * + ****************************************************************************/ + +void up_maskack_irq(int irq) +{ + up_disable_irq(irq); + +#if 0 /* Does not appear to be necessary in most cases */ + lpc43_clrpend(irq); +#endif +} + +/**************************************************************************** + * Name: up_prioritize_irq + * + * Description: + * Set the priority of an IRQ. + * + * Since this API is not supported on all architectures, it should be + * avoided in common implementations where possible. + * + ****************************************************************************/ + +#ifdef CONFIG_ARCH_IRQPRIO +int up_prioritize_irq(int irq, int priority) +{ + uint32_t regaddr; + uint32_t regval; + int shift; + + DEBUGASSERT(irq >= LPC43_IRQ_MEMFAULT && irq < NR_IRQS && (unsigned)priority <= NVIC_SYSH_PRIORITY_MIN); + + if (irq < LPC43_IRQ_EXTINT) + { + irq -= 4; + regaddr = NVIC_SYSH_PRIORITY(irq); + } + else + { + irq -= LPC43_IRQ_EXTINT; + regaddr = NVIC_IRQ_PRIORITY(irq); + } + + regval = getreg32(regaddr); + shift = ((irq & 3) << 3); + regval &= ~(0xff << shift); + regval |= (priority << shift); + putreg32(regval, regaddr); + + lpc43_dumpnvic("prioritize", irq); + return OK; +} +#endif diff --git a/nuttx/arch/arm/src/lpc43xx/lpc43_lowputc.h b/nuttx/arch/arm/src/lpc43xx/lpc43_lowputc.h new file mode 100644 index 000000000..ee5e630f4 --- /dev/null +++ b/nuttx/arch/arm/src/lpc43xx/lpc43_lowputc.h @@ -0,0 +1,88 @@ +/************************************************************************************ + * arch/arm/src/lpc43xx/lpc43_lowputc.h + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __ARCH_ARM_SRC_LPC43XX_LOWSETUP_H +#define __ARCH_ARM_SRC_LPC43XX_LOWSETUP_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +/************************************************************************************ + * Public Types + ************************************************************************************/ + +/************************************************************************************ + * Public Data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" { +#else +#define EXTERN extern +#endif + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: lpc43_lowsetup + * + * Description: + * Called at the very beginning of _start. Performs low level initialization + * of serial console. + * + ************************************************************************************/ + +EXTERN void lpc43_lowsetup(void); + +#undef EXTERN +#if defined(__cplusplus) +} +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __ARCH_ARM_SRC_LPC43XX_LOWSETUP_H */ diff --git a/nuttx/arch/arm/src/lpc43xx/lpc43_start.c b/nuttx/arch/arm/src/lpc43xx/lpc43_start.c new file mode 100644 index 000000000..76f4f8ca3 --- /dev/null +++ b/nuttx/arch/arm/src/lpc43xx/lpc43_start.c @@ -0,0 +1,231 @@ +/**************************************************************************** + * arch/arm/src/lpc43xx/lpc43_start.c + * arch/arm/src/chip/lpc43_start.c + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <stdint.h> +#include <assert.h> +#include <debug.h> + +#include <nuttx/init.h> +#include <arch/board/board.h> + +#include "up_arch.h" +#include "up_internal.h" + +#ifdef CONFIG_ARCH_FPU +# include "nvic.h" +#endif + +#include "lpc43_clockconfig.h" +#include "lpc43_lowputc.h" + +/**************************************************************************** + * Name: showprogress + * + * Description: + * Print a character on the UART to show boot status. + * + ****************************************************************************/ + +#ifdef CONFIG_DEBUG +# define showprogress(c) up_lowputc(c) +#else +# define showprogress(c) +#endif + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: lpc43_fpuconfig + * + * Description: + * Configure the FPU. Relative bit settings: + * + * CPACR: Enables access to CP10 and CP11 + * CONTROL.FPCA: Determines whether the FP extension is active in the + * current context: + * FPCCR.ASPEN: Enables automatic FP state preservation, then the + * processor sets this bit to 1 on successful completion of any FP + * instruction. + * FPCCR.LSPEN: Enables lazy context save of FP state. When this is + * done, the processor reserves space on the stack for the FP state, + * but does not save that state information to the stack. + * + * Software must not change the value of the ASPEN bit or LSPEN bit while either: + * - the CPACR permits access to CP10 and CP11, that give access to the FP + * extension, or + * - the CONTROL.FPCA bit is set to 1 + * + ****************************************************************************/ + +#ifdef CONFIG_ARCH_FPU +#ifdef CONFIG_ARMV7M_CMNVECTOR + +static inline void lpc43_fpuconfig(void) +{ + uint32_t regval; + + /* Set CONTROL.FPCA so that we always get the extended context frame + * with the volatile FP registers stacked above the basic context. + */ + + regval = getcontrol(); + regval |= (1 << 2); + setcontrol(regval); + + /* Ensure that FPCCR.LSPEN is disabled, so that we don't have to contend + * with the lazy FP context save behaviour. Clear FPCCR.ASPEN since we + * are going to turn on CONTROL.FPCA for all contexts. + */ + + regval = getreg32(NVIC_FPCCR); + regval &= ~((1 << 31) | (1 << 30)); + putreg32(regval, NVIC_FPCCR); + + /* Enable full access to CP10 and CP11 */ + + regval = getreg32(NVIC_CPACR); + regval |= ((3 << (2*10)) | (3 << (2*11))); + putreg32(regval, NVIC_CPACR); +} + +#else + +static inline void lpc43_fpuconfig(void) +{ + uint32_t regval; + + /* Clear CONTROL.FPCA so that we do not get the extended context frame + * with the volatile FP registers stacked in the saved context. + */ + + regval = getcontrol(); + regval &= ~(1 << 2); + setcontrol(regval); + + /* Ensure that FPCCR.LSPEN is disabled, so that we don't have to contend + * with the lazy FP context save behaviour. Clear FPCCR.ASPEN since we + * are going to keep CONTROL.FPCA off for all contexts. + */ + + regval = getreg32(NVIC_FPCCR); + regval &= ~((1 << 31) | (1 << 30)); + putreg32(regval, NVIC_FPCCR); + + /* Enable full access to CP10 and CP11 */ + + regval = getreg32(NVIC_CPACR); + regval |= ((3 << (2*10)) | (3 << (2*11))); + putreg32(regval, NVIC_CPACR); +} + +#endif + +#else +# define lpc43_fpuconfig() +#endif + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: _start + * + * Description: + * This is the reset entry point. + * + ****************************************************************************/ + +void __start(void) +{ + const uint32_t *src; + uint32_t *dest; + + /* Configure the uart so that we can get debug output as soon as possible */ + + lpc43_clockconfig(); + lpc43_fpuconfig(); + lpc43_lowsetup(); + showprogress('A'); + + /* Clear .bss. We'll do this inline (vs. calling memset) just to be + * certain that there are no issues with the state of global variables. + */ + + for (dest = &_sbss; dest < &_ebss; ) + { + *dest++ = 0; + } + showprogress('B'); + + /* Move the intialized data section from his temporary holding spot in + * FLASH into the correct place in SRAM. The correct place in SRAM is + * give by _sdata and _edata. The temporary location is in FLASH at the + * end of all of the other read-only data (.text, .rodata) at _eronly. + */ + + for (src = &_eronly, dest = &_sdata; dest < &_edata; ) + { + *dest++ = *src++; + } + showprogress('C'); + + /* Perform early serial initialization */ + +#ifdef USE_EARLYSERIALINIT + up_earlyserialinit(); +#endif + showprogress('D'); + + /* Initialize onboard resources */ + + lpc43_boardinitialize(); + showprogress('E'); + + /* Then start NuttX */ + + showprogress('\r'); + showprogress('\n'); + os_start(); + + /* Shoulnd't get here */ + + for(;;); +} diff --git a/nuttx/arch/arm/src/sam3u/sam3u_irq.c b/nuttx/arch/arm/src/sam3u/sam3u_irq.c index ecfb68b4a..156cba319 100644 --- a/nuttx/arch/arm/src/sam3u/sam3u_irq.c +++ b/nuttx/arch/arm/src/sam3u/sam3u_irq.c @@ -324,12 +324,6 @@ void up_irqinitialize(void) #ifndef CONFIG_SUPPRESS_INTERRUPTS - /* Initialize FIQs */ - -#ifdef CONFIG_ARCH_FIQ - up_fiqinitialize(); -#endif - /* Initialize logic to support a second level of interrupt decoding for * GPIO pins. */ diff --git a/nuttx/arch/arm/src/stm32/stm32_irq.c b/nuttx/arch/arm/src/stm32/stm32_irq.c index c5fab1514..36a5cf5fa 100644 --- a/nuttx/arch/arm/src/stm32/stm32_irq.c +++ b/nuttx/arch/arm/src/stm32/stm32_irq.c @@ -363,12 +363,6 @@ void up_irqinitialize(void) #ifndef CONFIG_SUPPRESS_INTERRUPTS - /* Initialize FIQs */ - -#ifdef CONFIG_ARCH_FIQ - up_fiqinitialize(); -#endif - /* And finally, enable interrupts */ setbasepri(NVIC_SYSH_PRIORITY_MAX); |