1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
|
#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#
comment "STM32 Configuration Options"
choice
prompt "STM32 Chip Selection"
default ARCH_CHIP_STM32F103ZET6
depends on ARCH_CHIP_STM32
config ARCH_CHIP_STM32F100C8
bool "STM32F100C8"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_VALUELINE
config ARCH_CHIP_STM32F100CB
bool "STM32F100CB"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_VALUELINE
config ARCH_CHIP_STM32F100R8
bool "STM32F100R8"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_VALUELINE
config ARCH_CHIP_STM32F100RB
bool "STM32F100RB"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_VALUELINE
config ARCH_CHIP_STM32F100V8
bool "STM32F100V8"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_VALUELINE
config ARCH_CHIP_STM32F100VB
bool "STM32F100VB"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_VALUELINE
config ARCH_CHIP_STM32F103RET6
bool "STM32F103RET6"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_HIGHDENSITY
config ARCH_CHIP_STM32F103VCT6
bool "STM32F103VCT6"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_HIGHDENSITY
config ARCH_CHIP_STM32F103VET6
bool "STM32F103VET6"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_HIGHDENSITY
config ARCH_CHIP_STM32F103ZET6
bool "STM32F103ZET6"
select ARCH_CORTEXM3
select STM32_STM32F10XX
config ARCH_CHIP_STM32F105VBT7
bool "STM32F105VBT7"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_CONNECTIVITYLINE
config ARCH_CHIP_STM32F107VC
bool "STM32F107VC"
select ARCH_CORTEXM3
select STM32_STM32F10XX
select STM32_CONNECTIVITYLINE
config ARCH_CHIP_STM32F207IG
bool "STM32F207IG"
select ARCH_CORTEXM3
select STM32_STM32F20XX
config ARCH_CHIP_STM32F405RG
bool "STM32F405RG"
select ARCH_CORTEXM4
select STM32_STM32F40XX
config ARCH_CHIP_STM32F405VG
bool "STM32F405VG"
select ARCH_CORTEXM4
select STM32_STM32F40XX
config ARCH_CHIP_STM32F405ZG
bool "STM32F405ZG"
select ARCH_CORTEXM4
select STM32_STM32F40XX
config ARCH_CHIP_STM32F407VE
bool "STM32F407VE"
select ARCH_CORTEXM4
select STM32_STM32F40XX
config ARCH_CHIP_STM32F407VG
bool "STM32F407VG"
select ARCH_CORTEXM3
select STM32_STM32F40XX
config ARCH_CHIP_STM32F407ZE
bool "STM32F407ZE"
select ARCH_CORTEXM4
select STM32_STM32F40XX
config ARCH_CHIP_STM32F407ZG
bool "STM32F407ZG"
select ARCH_CORTEXM4
select STM32_STM32F40XX
config ARCH_CHIP_STM32F407IE
bool "STM32F407IE"
select ARCH_CORTEXM4
select STM32_STM32F40XX
config ARCH_CHIP_STM32F407IG
bool "STM32F407IG"
select ARCH_CORTEXM4
select STM32_STM32F40XX
endchoice
config STM32_STM32F10XX
bool
config STM32_VALUELINE
bool
config STM32_HIGHDENSITY
bool
config STM32_CONNECTIVITYLINE
bool
config STM32_STM32F20XX
bool
config STM32_STM32F40XX
bool
choice
prompt "Toolchain Selection"
default STM32_CODESOURCERYW
depends on ARCH_CHIP_STM32
config STM32_CODESOURCERYW
bool "CodeSourcery for Windows"
config STM32_CODESOURCERYL
bool "CodeSourcery for Linux"
config STM32_ATOLLIC_LITE
bool "Atollic Lite for Windows"
config STM32_ATOLLIC_PRO
bool "Atollic Pro for Windows"
config STM32_DEVKITARM
bool "DevkitARM (Windows)"
config STM32_RAISONANCE
bool "STMicro Raisonance for Windows"
config STM32_BUILDROOT
bool "NuttX buildroot (Cygwin or Linux)"
endchoice
config STM32_DFU
bool "DFU bootloader"
default n
---help---
Configure and position code for use with the STMicro DFU bootloader. Do
not select this option if you will load code using JTAG/SWM.
menu "STM32 Peripheral Support"
config STM32_ADC1
bool "ADC1"
default n
select STM32_ADC
config STM32_ADC2
bool "ADC2"
default n
select STM32_ADC
config STM32_ADC3
bool "ADC3"
default n
select STM32_ADC
config STM32_CRC
bool "CRC"
default n
config STM32_DMA1
bool "DMA1"
default n
select ARCH_DMA
config STM32_DMA2
bool "DMA2"
default n
select ARCH_DMA
config STM32_BKP
bool "BKP"
default n
depends on STM32_STM32F10XX
config STM32_BKPSRAM
bool "BKP RAM"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_CAN1
bool "CAN1"
default n
select CAN
select STM32_CAN
config STM32_CAN2
bool "CAN2"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
select CAN
select STM32_CAN
config STM32_CCMDATARAM
bool "CMD/DATA RAM"
default n
depends on STM32_STM32F40XX
config STM32_CRYP
bool "CRYP"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_DAC1
bool "DAC1"
default n
select STM32_DAC
config STM32_DAC2
bool "DAC2"
default n
select STM32_DAC
config STM32_DCMI
bool "DCMI"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_ETHMAC
bool "Ethernet MAC"
default n
depends on STM32_CONNECTIVITYLINE || STM32_STM32F20XX || STM32_STM32F40XX
config STM32_FSMC
bool "FSMC"
default n
depends on !STM32_CONNECTIVITYLINE
config STM32_HASH
bool "HASH"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_I2C1
bool "I2C1"
default n
select STM32_I2C
config STM32_I2C2
bool "I2C2"
default n
select STM32_I2C
config STM32_I2C3
bool "I2C3"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
select STM32_I2C
config STM32_IWDG
bool "IWDG"
default n
select WATCHDOG
config STM32_OTGFS
bool "OTG FS"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_OTGHS
bool "OTG HS"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_PWR
bool "PWR"
default n
config STM32_RNG
bool "RNG"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_SDIO
bool "SDIO"
default n
depends on !STM32_CONNECTIVITYLINE
config STM32_SPI1
bool "SPI1"
default n
select SPI
select STM32_SPI
config STM32_SPI2
bool "SPI2"
default n
select SPI
select STM32_SPI
config STM32_SPI3
bool "SPI3"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
select SPI
select STM32_SPI
config STM32_SPI4
bool "SPI4"
default n
depends on STM32_STM32F10XX
select SPI
select STM32_SPI
config STM32_SYSCFG
bool "SYSCFG"
default y
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_TIM1
bool "TIM1"
default n
config STM32_TIM2
bool "TIM2"
default n
config STM32_TIM3
bool "TIM3"
default n
config STM32_TIM4
bool "TIM4"
default n
config STM32_TIM5
bool "TIM5"
default n
config STM32_TIM6
bool "TIM6"
default n
config STM32_TIM7
bool "TIM7"
default n
config STM32_TIM8
bool "TIM8"
default n
config STM32_TIM9
bool "TIM9"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_TIM10
bool "TIM10"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_TIM11
bool "TIM11"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_TIM12
bool "TIM12"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_TIM13
bool "TIM13"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_TIM14
bool "TIM14"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_USART1
bool "USART1"
default n
select ARCH_HAVE_USART1
config STM32_USART2
bool "USART2"
default n
select ARCH_HAVE_USART2
config STM32_USART3
bool "USART3"
default n
select ARCH_HAVE_USART3
config STM32_UART4
bool "UART4"
default n
select ARCH_HAVE_UART4
config STM32_UART5
bool "UART5"
default n
select ARCH_HAVE_UART5
config STM32_USART6
bool "USART6"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
select ARCH_HAVE_USART6
config STM32_USB
bool "USB Device"
default n
depends on STM32_STM32F10XX
select USBDEV
config STM32_WWDG
bool "WWDG"
default n
select WATCHDOG
endmenu
config STM32_ADC
bool
config STM32_DAC
bool
config STM32_SPI
bool
config STM32_I2C
bool
config STM32_CAN
bool
menu "Alternate Pin Mapping"
choice
prompt "TIM1 Alternate Pin Mappings"
depends on STM32_STM32F10XX && STM32_TIM1
default STM32_TIM1_NO_REMAP
config STM32_TIM1_NO_REMAP
bool "No pin remapping"
config STM32_TIM1_FULL_REMAP
bool "Full pin remapping"
config STM32_TIM1_PARTIAL_REMAP
bool "Partial pin remapping"
endchoice
choice
prompt "TIM2 Alternate Pin Mappings"
depends on STM32_STM32F10XX && STM32_TIM2
default STM32_TIM2_NO_REMAP
config STM32_TIM2_NO_REMAP
bool "No pin remapping"
config STM32_TIM2_FULL_REMAP
bool "Full pin remapping"
config STM32_TIM2_PARTIAL_REMAP_1
bool "Partial pin remapping #1"
config STM32_TIM2_PARTIAL_REMAP_2
bool "Partial pin remapping #2"
endchoice
choice
prompt "TIM3 Alternate Pin Mappings"
depends on STM32_STM32F10XX && STM32_TIM3
default STM32_TIM3_NO_REMAP
config STM32_TIM3_NO_REMAP
bool "No pin remapping"
config STM32_TIM3_FULL_REMAP
bool "Full pin remapping"
config STM32_TIM3_PARTIAL_REMAP
bool "Partial pin remapping"
endchoice
config STM32_TIM4_REMAP
bool "TIM4 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_TIM4
config STM32_USART1_REMAP
bool "USART1 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_USART1
config STM32_USART2_REMAP
bool "USART2 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_USART2
choice
prompt "USART3 Alternate Pin Mappings"
depends on STM32_STM32F10XX && STM32_USART3
default STM32_USART3_NO_REMAP
config STM32_USART3_NO_REMAP
bool "No pin remapping"
config STM32_USART3_FULL_REMAP
bool "Full pin remapping"
config STM32_USART3_PARTIAL_REMAP
bool "Partial pin remapping"
endchoice
config STM32_SPI1_REMAP
bool "SPI1 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_SPI1
config STM32_SPI3_REMAP
bool "SPI3 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_SPI3
config STM32_I2C1_REMAP
bool "I2C1 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_I2C1
choice
prompt "CAN1 Alternate Pin Mappings"
depends on STM32_STM32F10XX && STM32_CAN1
default STM32_CAN1_NO_REMAP
config STM32_CAN1_NO_REMAP
bool "No pin remapping"
config STM32_CAN1_REMAP1
bool "CAN1 alternate pin remapping #1"
config STM32_CAN1_REMAP2
bool "CAN1 alternate pin remapping #2"
endchoice
config STM32_CAN2_REMAP
bool "CAN2 Alternate Pin Mapping"
default n
depends on STM32_CONNECTIVITYLINE && STM32_CAN2
config STM32_ETH_REMAP
bool "Ethernet Alternate Pin Mapping"
default n
depends on STM32_CONNECTIVITYLINE && STM32_ETHMAC
endmenu
choice
prompt "JTAG Configuration"
default STM32_JTAG_DISABLE
---help---
JTAG Enable settings (by default JTAG-DP and SW-DP are disabled)
config STM32_JTAG_DISABLE
bool "Disable all JTAG clocking"
config STM32_JTAG_FULL_ENABLE
bool "Enable full SWJ (JTAG-DP + SW-DP)"
config STM32_JTAG_NOJNTRST_ENABLE
bool "Enable full SWJ (JTAG-DP + SW-DP) but without JNTRST"
config STM32_JTAG_SW_ENABLE
bool "Set JTAG-DP disabled and SW-DP enabled"
endchoice
config STM32_FORCEPOWER
bool "Force power"
default n
---help---
Timer and I2C devices may need to the following to force power to be applied
unconditionally at power up. (Otherwise, the device is powered when it is
initialized).
config ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG
bool "Custom clock configuration"
default n
---help---
Enables special, board-specific STM32 clock configuration.
config STM32_CCMEXCLUDE
bool "Exclude CCM SRAM from the heap"
depends on STM32_STM32F20XX || STM32_STM32F40XX
default y if ARCH_DMA
---help---
Exclude CCM SRAM from the HEAP because it cannot be used for DMA.
config STM32_FSMC_SRAM
bool "External SRAM on FSMC"
default n
depends on STM32_FSMC
select ARCH_HAVE_HEAP2
---help---
In addition to internal SRAM, SRAM may also be available through the FSMC.
config STM32_TIM1_PWM
bool "TIM1 PWM"
default n
depends on STM32_TIM1
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM1
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM1_CHANNEL
int "TIM1 PWM Output Channel"
default 1
depends on STM32_TIM1_PWM
---help---
If TIM1 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM2_PWM
bool "TIM2 PWM"
default n
depends on STM32_TIM2
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM2
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM2_CHANNEL
int "TIM2 PWM Output Channel"
default 1
depends on STM32_TIM2_PWM
---help---
If TIM2 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM3_PWM
bool "TIM3 PWM"
default n
depends on STM32_TIM3
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM3
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM3_CHANNEL
int "TIM3 PWM Output Channel"
default 1
depends on STM32_TIM3_PWM
---help---
If TIM3 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM4_PWM
bool "TIM4 PWM"
default n
depends on STM32_TIM4
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM4
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM4_CHANNEL
int "TIM4 PWM Output Channel"
default 1
depends on STM32_TIM4_PWM
---help---
If TIM4 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM5_PWM
bool "TIM5 PWM"
default n
depends on STM32_TIM5
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM5
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM5_CHANNEL
int "TIM5 PWM Output Channel"
default 1
depends on STM32_TIM5_PWM
---help---
If TIM5 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM8_PWM
bool "TIM8 PWM"
default n
depends on STM32_TIM8
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM8
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM8_CHANNEL
int "TIM8 PWM Output Channel"
default 1
depends on STM32_TIM8_PWM
---help---
If TIM8 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM9_PWM
bool "TIM9 PWM"
default n
depends on STM32_TIM9
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM9
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM9_CHANNEL
int "TIM9 PWM Output Channel"
default 1
depends on STM32_TIM9_PWM
---help---
If TIM9 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM10_PWM
bool "TIM10 PWM"
default n
depends on STM32_TIM10
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM10
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM10_CHANNEL
int "TIM10 PWM Output Channel"
default 1
depends on STM32_TIM10_PWM
---help---
If TIM10 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM11_PWM
bool "TIM11 PWM"
default n
depends on STM32_TIM11
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM11
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM11_CHANNEL
int "TIM11 PWM Output Channel"
default 1
depends on STM32_TIM11_PWM
---help---
If TIM11 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM12_PWM
bool "TIM12 PWM"
default n
depends on STM32_TIM12
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM12
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM12_CHANNEL
int "TIM12 PWM Output Channel"
default 1
depends on STM32_TIM12_PWM
---help---
If TIM12 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM13_PWM
bool "TIM13 PWM"
default n
depends on STM32_TIM13
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM13
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM13_CHANNEL
int "TIM13 PWM Output Channel"
default 1
depends on STM32_TIM13_PWM
---help---
If TIM13 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM14_PWM
bool "TIM14 PWM"
default n
depends on STM32_TIM14
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM14
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM14_CHANNEL
int "TIM14 PWM Output Channel"
default 1
depends on STM32_TIM14_PWM
---help---
If TIM14 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM1_ADC
bool "TIM1 ADC"
default n
depends on STM32_TIM1 && STM32_ADC
---help---
Reserve timer 1 for use by ADC
Timer devices may be used for different purposes. If STM32_TIM1 is
defined then the following may also be defined to indicate that the
timer is intended to be used for ADC conversion. Note that ADC usage
requires two definition: Not only do you have to assign the timer
for used by the ADC, but then you also have to configure which ADC
channel it is assigned to.
choice
prompt "Select TIM1 ADC channel"
default STM32_TIM1_ADC1
depends on STM32_TIM1_ADC
config STM32_TIM1_ADC1
bool "TIM1 ADC channel 1"
---help---
Reserve TIM1 to trigger ADC1
config STM32_TIM1_ADC2
bool "TIM1 ADC channel 2"
---help---
Reserve TIM1 to trigger ADC2
config STM32_TIM1_ADC3
bool "TIM1 ADC channel 3"
---help---
Reserve TIM1 to trigger ADC3
endchoice
config STM32_TIM2_ADC
bool "TIM2 ADC"
default n
depends on STM32_TIM2 && STM32_ADC
---help---
Reserve timer 1 for use by ADC
Timer devices may be used for different purposes. If STM32_TIM2 is
defined then the following may also be defined to indicate that the
timer is intended to be used for ADC conversion. Note that ADC usage
requires two definition: Not only do you have to assign the timer
for used by the ADC, but then you also have to configure which ADC
channel it is assigned to.
choice
prompt "Select TIM2 ADC channel"
default STM32_TIM2_ADC1
depends on STM32_TIM2_ADC
config STM32_TIM2_ADC1
bool "TIM2 ADC channel 1"
---help---
Reserve TIM2 to trigger ADC1
config STM32_TIM2_ADC2
bool "TIM2 ADC channel 2"
---help---
Reserve TIM2 to trigger ADC2
config STM32_TIM2_ADC3
bool "TIM2 ADC channel 3"
---help---
Reserve TIM2 to trigger ADC3
endchoice
config STM32_TIM3_ADC
bool "TIM3 ADC"
default n
depends on STM32_TIM3 && STM32_ADC
---help---
Reserve timer 1 for use by ADC
Timer devices may be used for different purposes. If STM32_TIM3 is
defined then the following may also be defined to indicate that the
timer is intended to be used for ADC conversion. Note that ADC usage
requires two definition: Not only do you have to assign the timer
for used by the ADC, but then you also have to configure which ADC
channel it is assigned to.
choice
prompt "Select TIM3 ADC channel"
default STM32_TIM3_ADC1
depends on STM32_TIM3_ADC
config STM32_TIM3_ADC1
bool "TIM3 ADC channel 1"
---help---
Reserve TIM3 to trigger ADC1
config STM32_TIM3_ADC2
bool "TIM3 ADC channel 2"
---help---
Reserve TIM3 to trigger ADC2
config STM32_TIM3_ADC3
bool "TIM3 ADC channel 3"
---help---
Reserve TIM3 to trigger ADC3
endchoice
config STM32_TIM4_ADC
bool "TIM4 ADC"
default n
depends on STM32_TIM4 && STM32_ADC
---help---
Reserve timer 1 for use by ADC
Timer devices may be used for different purposes. If STM32_TIM4 is
defined then the following may also be defined to indicate that the
timer is intended to be used for ADC conversion. Note that ADC usage
requires two definition: Not only do you have to assign the timer
for used by the ADC, but then you also have to configure which ADC
channel it is assigned to.
choice
prompt "Select TIM4 ADC channel"
default STM32_TIM4_ADC1
depends on STM32_TIM4_ADC
config STM32_TIM4_ADC1
bool "TIM4 ADC channel 1"
---help---
Reserve TIM4 to trigger ADC1
config STM32_TIM4_ADC2
bool "TIM4 ADC channel 2"
---help---
Reserve TIM4 to trigger ADC2
config STM32_TIM4_ADC3
bool "TIM4 ADC channel 3"
---help---
Reserve TIM4 to trigger ADC3
endchoice
config STM32_TIM5_ADC
bool "TIM5 ADC"
default n
depends on STM32_TIM5 && STM32_ADC
---help---
Reserve timer 1 for use by ADC
Timer devices may be used for different purposes. If STM32_TIM5 is
defined then the following may also be defined to indicate that the
timer is intended to be used for ADC conversion. Note that ADC usage
requires two definition: Not only do you have to assign the timer
for used by the ADC, but then you also have to configure which ADC
channel it is assigned to.
choice
prompt "Select TIM5 ADC channel"
default STM32_TIM5_ADC1
depends on STM32_TIM5_ADC
config STM32_TIM5_ADC1
bool "TIM5 ADC channel 1"
---help---
Reserve TIM5 to trigger ADC1
config STM32_TIM5_ADC2
bool "TIM5 ADC channel 2"
---help---
Reserve TIM5 to trigger ADC2
config STM32_TIM5_ADC3
bool "TIM5 ADC channel 3"
---help---
Reserve TIM5 to trigger ADC3
endchoice
config STM32_TIM8_ADC
bool "TIM8 ADC"
default n
depends on STM32_TIM8 && STM32_ADC
---help---
Reserve timer 1 for use by ADC
Timer devices may be used for different purposes. If STM32_TIM8 is
defined then the following may also be defined to indicate that the
timer is intended to be used for ADC conversion. Note that ADC usage
requires two definition: Not only do you have to assign the timer
for used by the ADC, but then you also have to configure which ADC
channel it is assigned to.
choice
prompt "Select TIM8 ADC channel"
default STM32_TIM8_ADC1
depends on STM32_TIM8_ADC
config STM32_TIM8_ADC1
bool "TIM8 ADC channel 1"
---help---
Reserve TIM8 to trigger ADC1
config STM32_TIM8_ADC2
bool "TIM8 ADC channel 2"
---help---
Reserve TIM8 to trigger ADC2
config STM32_TIM8_ADC3
bool "TIM8 ADC channel 3"
---help---
Reserve TIM8 to trigger ADC3
endchoice
config STM32_TIM1_DAC
bool "TIM1 DAC"
default n
depends on STM32_TIM1 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM1 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM1 DAC channel"
default STM32_TIM1_DAC1
depends on STM32_TIM1_DAC
config STM32_TIM1_DAC1
bool "TIM1 DAC channel 1"
---help---
Reserve TIM1 to trigger DAC1
config STM32_TIM1_DAC2
bool "TIM1 DAC channel 2"
---help---
Reserve TIM1 to trigger DAC2
endchoice
config STM32_TIM2_DAC
bool "TIM2 DAC"
default n
depends on STM32_TIM2 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM2 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM2 DAC channel"
default STM32_TIM2_DAC1
depends on STM32_TIM2_DAC
config STM32_TIM2_DAC1
bool "TIM2 DAC channel 1"
---help---
Reserve TIM2 to trigger DAC1
config STM32_TIM2_DAC2
bool "TIM2 DAC channel 2"
---help---
Reserve TIM2 to trigger DAC2
endchoice
config STM32_TIM3_DAC
bool "TIM3 DAC"
default n
depends on STM32_TIM3 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM3 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM3 DAC channel"
default STM32_TIM3_DAC1
depends on STM32_TIM3_DAC
config STM32_TIM3_DAC1
bool "TIM3 DAC channel 1"
---help---
Reserve TIM3 to trigger DAC1
config STM32_TIM3_DAC2
bool "TIM3 DAC channel 2"
---help---
Reserve TIM3 to trigger DAC2
endchoice
config STM32_TIM4_DAC
bool "TIM4 DAC"
default n
depends on STM32_TIM4 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM4 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM4 DAC channel"
default STM32_TIM4_DAC1
depends on STM32_TIM4_DAC
config STM32_TIM4_DAC1
bool "TIM4 DAC channel 1"
---help---
Reserve TIM4 to trigger DAC1
config STM32_TIM4_DAC2
bool "TIM4 DAC channel 2"
---help---
Reserve TIM4 to trigger DAC2
endchoice
config STM32_TIM5_DAC
bool "TIM5 DAC"
default n
depends on STM32_TIM5 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM5 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM5 DAC channel"
default STM32_TIM5_DAC1
depends on STM32_TIM5_DAC
config STM32_TIM5_DAC1
bool "TIM5 DAC channel 1"
---help---
Reserve TIM5 to trigger DAC1
config STM32_TIM5_DAC2
bool "TIM5 DAC channel 2"
---help---
Reserve TIM5 to trigger DAC2
endchoice
config STM32_TIM6_DAC
bool "TIM6 DAC"
default n
depends on STM32_TIM6 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM6 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM6 DAC channel"
default STM32_TIM6_DAC1
depends on STM32_TIM6_DAC
config STM32_TIM6_DAC1
bool "TIM6 DAC channel 1"
---help---
Reserve TIM6 to trigger DAC1
config STM32_TIM6_DAC2
bool "TIM6 DAC channel 2"
---help---
Reserve TIM6 to trigger DAC2
endchoice
config STM32_TIM7_DAC
bool "TIM7 DAC"
default n
depends on STM32_TIM7 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM7 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM7 DAC channel"
default STM32_TIM7_DAC1
depends on STM32_TIM7_DAC
config STM32_TIM7_DAC1
bool "TIM7 DAC channel 1"
---help---
Reserve TIM7 to trigger DAC1
config STM32_TIM7_DAC2
bool "TIM7 DAC channel 2"
---help---
Reserve TIM7 to trigger DAC2
endchoice
config STM32_TIM8_DAC
bool "TIM8 DAC"
default n
depends on STM32_TIM8 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM8 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM8 DAC channel"
default STM32_TIM8_DAC1
depends on STM32_TIM8_DAC
config STM32_TIM8_DAC1
bool "TIM8 DAC channel 1"
---help---
Reserve TIM8 to trigger DAC1
config STM32_TIM8_DAC2
bool "TIM8 DAC channel 2"
---help---
Reserve TIM8 to trigger DAC2
endchoice
config STM32_TIM9_DAC
bool "TIM9 DAC"
default n
depends on STM32_TIM9 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM9 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM9 DAC channel"
default STM32_TIM9_DAC1
depends on STM32_TIM9_DAC
config STM32_TIM9_DAC1
bool "TIM9 DAC channel 1"
---help---
Reserve TIM9 to trigger DAC1
config STM32_TIM9_DAC2
bool "TIM9 DAC channel 2"
---help---
Reserve TIM9 to trigger DAC2
endchoice
config STM32_TIM10_DAC
bool "TIM10 DAC"
default n
depends on STM32_TIM10 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM10 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM10 DAC channel"
default STM32_TIM10_DAC1
depends on STM32_TIM10_DAC
config STM32_TIM10_DAC1
bool "TIM10 DAC channel 1"
---help---
Reserve TIM10 to trigger DAC1
config STM32_TIM10_DAC2
bool "TIM10 DAC channel 2"
---help---
Reserve TIM10 to trigger DAC2
endchoice
config STM32_TIM11_DAC
bool "TIM11 DAC"
default n
depends on STM32_TIM11 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM11 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM11 DAC channel"
default STM32_TIM11_DAC1
depends on STM32_TIM11_DAC
config STM32_TIM11_DAC1
bool "TIM11 DAC channel 1"
---help---
Reserve TIM11 to trigger DAC1
config STM32_TIM11_DAC2
bool "TIM11 DAC channel 2"
---help---
Reserve TIM11 to trigger DAC2
endchoice
config STM32_TIM12_DAC
bool "TIM12 DAC"
default n
depends on STM32_TIM12 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM12 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM12 DAC channel"
default STM32_TIM12_DAC1
depends on STM32_TIM12_DAC
config STM32_TIM12_DAC1
bool "TIM12 DAC channel 1"
---help---
Reserve TIM12 to trigger DAC1
config STM32_TIM12_DAC2
bool "TIM12 DAC channel 2"
---help---
Reserve TIM12 to trigger DAC2
endchoice
config STM32_TIM13_DAC
bool "TIM13 DAC"
default n
depends on STM32_TIM13 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM13 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM13 DAC channel"
default STM32_TIM13_DAC1
depends on STM32_TIM13_DAC
config STM32_TIM13_DAC1
bool "TIM13 DAC channel 1"
---help---
Reserve TIM13 to trigger DAC1
config STM32_TIM13_DAC2
bool "TIM13 DAC channel 2"
---help---
Reserve TIM13 to trigger DAC2
endchoice
config STM32_TIM14_DAC
bool "TIM14 DAC"
default n
depends on STM32_TIM14 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM14 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM14 DAC channel"
default STM32_TIM14_DAC1
depends on STM32_TIM14_DAC
config STM32_TIM14_DAC1
bool "TIM14 DAC channel 1"
---help---
Reserve TIM14 to trigger DAC1
config STM32_TIM14_DAC2
bool "TIM14 DAC channel 2"
---help---
Reserve TIM14 to trigger DAC2
endchoice
config USART1_RXDMA
bool "USART1 Rx DMA"
default n
depends on STM32_STM32F40XX && STM32_DMA2
---help---
In high data rate usage, Rx DMA may eliminate Rx overrun errors
config USART2_RXDMA
bool "USART2 Rx DMA"
default n
depends on STM32_STM32F40XX && STM32_DMA1
---help---
In high data rate usage, Rx DMA may eliminate Rx overrun errors
config USART3_RXDMA
bool "USART3 Rx DMA"
default n
depends on STM32_STM32F40XX && STM32_DMA1
---help---
In high data rate usage, Rx DMA may eliminate Rx overrun errors
config UART4_RXDMA
bool "UART4 Rx DMA"
default n
depends on STM32_STM32F40XX && STM32_DMA1
---help---
In high data rate usage, Rx DMA may eliminate Rx overrun errors
config UART5_RXDMA
bool "UART5 Rx DMA"
default n
depends on STM32_STM32F40XX && STM32_DMA1
---help---
In high data rate usage, Rx DMA may eliminate Rx overrun errors
config USART6_RXDMA
bool "USART6 Rx DMA"
default n
depends on STM32_STM32F40XX && STM32_DMA2
---help---
In high data rate usage, Rx DMA may eliminate Rx overrun errors
config SERIAL_TERMIOS
bool "Serial driver TERMIOS supported"
depends on STM32_USART1 || STM32_USART2 || STM32_USART3 || STM32_UART4 || STM32_UART5 || STM32_USART6
default n
---help---
Serial driver supports termios.h interfaces (tcsetattr, tcflush, etc.).
If this is not defined, then the terminal settings (baud, parity, etc).
are not configurable at runtime; serial streams cannot be flushed, etc..
menu "SPI Configuration"
depends on STM32_SPI
config STM32_SPI_INTERRUPTS
bool "Interrupt driver SPI"
default n
---help---
Select to enable interrupt driven SPI support. Non-interrupt-driven,
poll-waiting is recommended if the interrupt rate would be to high in
the interrupt driven case.
config STM32_SPI_DMA
bool "SPI DMA"
default n
---help---
Use DMA to improve SPI transfer performance. Cannot be used with STM32_SPI_INTERRUPT.
endmenu
menu "I2C Configuration"
depends on STM32_I2C
config STM32_I2C_DYNTIMEO
bool "Use dynamic timeouts"
default n
depends on STM32_I2C
config STM32_I2C_DYNTIMEO_USECPERBYTE
int "Timeout Microseconds per Byte"
default 500
depends on STM32_I2C_DYNTIMEO
config STM32_I2C_DYNTIMEO_STARTSTOP
int "Timeout for Start/Stop (Milliseconds)"
default 1000
depends on STM32_I2C_DYNTIMEO
config STM32_I2CTIMEOSEC
int "Timeout seconds"
default 0
depends on STM32_I2C
config STM32_I2CTIMEOMS
int "Timeout Milliseconds"
default 500
depends on STM32_I2C && !STM32_I2C_DYNTIMEO
config STM32_I2CTIMEOTICKS
int "Timeout for Done and Stop (ticks)"
default 500
depends on STM32_I2C && !STM32_I2C_DYNTIMEO
config STM32_I2C_DUTY16_9
bool "Frequency with Tlow/Thigh = 16/9 "
default n
depends on STM32_I2C
endmenu
menu "SDIO Configuration"
depends on STM32_SDIO
config SDIO_DMA
bool "Support DMA data transfers"
default y if STM32_DMA2
depends on STM32_DMA2
---help---
Support DMA data transfers. Requires STM32_SDIO and config STM32_DMA2.
config SDIO_PRI
hex "SDIO interrupt priority"
default 128
---help---
Select SDIO interrupt prority. Default: 128.
config SDIO_DMAPRIO
hex "SDIO DMA priority"
default 0x00001000
---help---
Select SDIO DMA prority. Options: 0x00000000 low, 0x00001000 medium,
0x00002000 high, 0x00003000 very high. Default: medium.
config SDIO_WIDTH_D1_ONLY
bool "Use D1 only"
default n
---help---
Select 1-bit transfer mode. Default: 4-bit transfer mode.
endmenu
if STM32_ETHMAC
menu "Ethernet MAC configuration"
config STM32_PHYADDR
int "PHY address"
default 1
---help---
The 5-bit address of the PHY on the board. Default: 1
config STM32_MII
bool "Use MII interface"
default n
---help---
Support Ethernet MII interface.
choice
prompt "MII clock configuration"
default STM32_MII_MCO if STM32_STM32F10XX
default STM32_MII_MCO1 if STM32_STM32F20XX || STM32_STM32F40XX
depends on STM32_MII
config STM32_MII_MCO
bool "Use MC0 as MII clock"
depends on STM32_STM32F10XX
---help---
Use MCO to clock the MII interface. Default: Use MC0
config STM32_MII_MCO1
bool "Use MC01 as MII clock"
depends on (STM32_STM32F20XX || STM32_STM32F40XX)
---help---
Use MCO1 to clock the MII interface. Default: Use MC01
config STM32_MII_MCO2
bool "Use MC02 as MII clock"
depends on (STM32_STM32F20XX || STM32_STM32F40XX)
---help---
Use MCO2 to clock the MII interface. Default: Use MC01
config STM32_MII_EXTCLK
bool "External MII clock"
---help---
Clocking is provided by external logic. Don't use MCO for MII
clock. Default: Use MC0[1]
endchoice
config STM32_AUTONEG
bool "Use autonegotiation"
default y
---help---
Use PHY autonegotiation to determine speed and mode
config STM32_ETHFD
bool "Full duplex"
default n
depends on !STM32_AUTONEG
---help---
If STM32_AUTONEG is not defined, then this may be defined to select full duplex
mode. Default: half-duplex
config STM32_ETH100MBPS
bool "100 Mbps"
default n
depends on !STM32_AUTONEG
---help---
If STM32_AUTONEG is not defined, then this may be defined to select 100 MBps
speed. Default: 10 Mbps
config STM32_PHYSR
int "PHY Status Register Address (decimal)"
depends on STM32_AUTONEG
---help---
This must be provided if STM32_AUTONEG is defined. The PHY status register
address may diff from PHY to PHY. This configuration sets the address of
the PHY status register.
config STM32_PHYSR_ALTCONFIG
bool "PHY Status Alternate Bit Layout"
default n
depends on STM32_AUTONEG
---help---
Different PHYs present speed and mode information in different ways. Some
will present separate information for speed and mode (this is the default).
Those PHYs, for example, may provide a 10/100 Mbps indication and a separate
full/half duplex indication. This options selects an alternative representation
where speed and mode information are combined. This might mean, for example,
separate bits for 10HD, 100HD, 10FD and 100FD.
config STM32_PHYSR_SPEED
hex "PHY Speed Mask"
depends on STM32_AUTONEG && !STM32_PHYSR_ALTCONFIG
---help---
This must be provided if STM32_AUTONEG is defined. This provides bit mask
for isolating the 10 or 100MBps speed indication.
config STM32_PHYSR_100MBPS
hex "PHY 100Mbps Speed Value"
depends on STM32_AUTONEG && !STM32_PHYSR_ALTCONFIG
---help---
This must be provided if STM32_AUTONEG is defined. This provides the value
of the speed bit(s) indicating 100MBps speed.
config STM32_PHYSR_MODE
hex "PHY Mode Mask"
depends on STM32_AUTONEG && !STM32_PHYSR_ALTCONFIG
---help---
This must be provided if STM32_AUTONEG is defined. This provide bit mask
for isolating the full or half duplex mode bits.
config STM32_PHYSR_FULLDUPLEX
hex "PHY Full Duplex Mode Value"
depends on STM32_AUTONEG && !STM32_PHYSR_ALTCONFIG
---help---
This must be provided if STM32_AUTONEG is defined. This provides the
value of the mode bits indicating full duplex mode.
config STM32_PHYSR_ALTMODE
hex "PHY Mode Mask"
depends on STM32_AUTONEG && STM32_PHYSR_ALTCONFIG
---help---
This must be provided if STM32_AUTONEG is defined. This provide bit mask
for isolating the speed and full/half duplex mode bits.
config STM32_PHYSR_10HD
hex "10MHz/Half Duplex Value"
depends on STM32_AUTONEG && STM32_PHYSR_ALTCONFIG
---help---
This must be provided if STM32_AUTONEG is defined. This is the value
under the bit mask that represents the 10Mbps, half duplex setting.
config STM32_PHYSR_100HD
hex "100MHz/Half Duplex Value"
depends on STM32_AUTONEG && STM32_PHYSR_ALTCONFIG
---help---
This must be provided if STM32_AUTONEG is defined. This is the value
under the bit mask that represents the 100Mbps, half duplex setting.
config STM32_PHYSR_10FD
hex "10MHz/Full Duplex Value"
depends on STM32_AUTONEG && STM32_PHYSR_ALTCONFIG
---help---
This must be provided if STM32_AUTONEG is defined. This is the value
under the bit mask that represents the 10Mbps, full duplex setting.
config STM32_PHYSR_100FD
hex "100MHz/Full Duplex Value"
depends on STM32_AUTONEG && STM32_PHYSR_ALTCONFIG
---help---
This must be provided if STM32_AUTONEG is defined. This is the value
under the bit mask that represents the 100Mbps, full duplex setting.
config STM32_ETH_PTP
bool "Precision Time Protocol (PTP)"
default n
---help---
Precision Time Protocol (PTP). Not supported but some hooks are indicated
with this condition.
config STM32_RMII
bool
default y if !STM32_MII
choice
prompt "RMII clock configuration"
default STM32_RMII_MCO if STM32_STM32F10XX
default STM32_RMII_MCO1 if STM32_STM32F20XX || STM32_STM32F40XX
depends on STM32_RMII
config STM32_RMII_MCO
bool "Use MC0 as RMII clock"
depends on STM32_STM32F10XX
---help---
Use MCO to clock the RMII interface. Default: Use MC0
config STM32_RMII_MCO1
bool "Use MC01 as RMII clock"
depends on (STM32_STM32F20XX || STM32_STM32F40XX)
---help---
Use MCO1 to clock the RMII interface. Default: Use MC01
config STM32_RMII_MCO2
bool "Use MC02 as RMII clock"
depends on (STM32_STM32F20XX || STM32_STM32F40XX)
---help---
Use MCO2 to clock the RMII interface. Default: Use MC01
config STM32_RMII_EXTCLK
bool "External RMII clock"
---help---
Clocking is provided by external logic. Don't use MCO for RMII
clock. Default: Use MC0[1]
endchoice
config STM32_ETHMAC_REGDEBUG
bool "Register-Level Debug"
default n
depends on DEBUG
---help---
Enable very low-level register access debug. Depends on DEBUG.
endmenu
endif
menu "USB Host Configuration"
config STM32_OTGFS_RXFIFO_SIZE
int "Rx Packet Size"
default 128
depends on USBHOST && STM32_OTGFS
---help---
Size of the RX FIFO in 32-bit words. Default 128 (512 bytes)
config STM32_OTGFS_NPTXFIFO_SIZE
int "Non-periodic Tx FIFO Size"
default 96
depends on USBHOST && STM32_OTGFS
---help---
Size of the non-periodic Tx FIFO in 32-bit words. Default 96 (384 bytes)
config STM32_OTGFS_PTXFIFO_SIZE
int "Periodic Tx FIFO size"
default 128
depends on USBHOST && STM32_OTGFS
---help---
Size of the periodic Tx FIFO in 32-bit words. Default 96 (384 bytes)
config STM32_OTGFS_DESCSIZE
int "Descriptor Size"
default 128
depends on USBHOST && STM32_OTGFS
---help---
Maximum size to allocate for descriptor memory descriptor. Default: 128
config STM32_OTGFS_SOFINTR
bool "Enable SOF interrupts"
default n
depends on USBHOST && STM32_OTGFS
---help---
Enable SOF interrupts. Why would you ever want to do that?
config STM32_USBHOST_REGDEBUG
bool "Register-Level Debug"
default n
depends on USBHOST && STM32_OTGFS
---help---
Enable very low-level register access debug. Depends on DEBUG.
config STM32_USBHOST_PKTDUMP
bool "Packet Dump Debug"
default n
depends on USBHOST && STM32_OTGFS
---help---
Dump all incoming and outgoing USB packets. Depends on DEBUG.
endmenu
|