path: root/nuttx/arch/arm/src/stm32/chip/stm32f30xxx_rcc.h

/************************************************************************************
 * arch/arm/src/stm32/chip/stm32f30xx_rcc.h
 * For STM32L100xx, STM32L151xx, STM32L152xx and STM32L162xx advanced ARM-based
 * 32-bit MCUs
 *
 *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ************************************************************************************/

#ifndef __ARCH_ARM_SRC_STM32_CHIP_STM32F30XXX_RCC_H
#define __ARCH_ARM_SRC_STM32_CHIP_STM32F30XXX_RCC_H

/************************************************************************************
 * Pre-processor Definitions
 ************************************************************************************/

/* Register Offsets *****************************************************************/

#define STM32_RCC_CR_OFFSET         0x0000  /* Clock control register */
#define STM32_RCC_CFGR_OFFSET       0x0004  /* Clock configuration register */
#define STM32_RCC_CIR_OFFSET        0x0008  /* Clock interrupt register */
#define STM32_RCC_APB2RSTR_OFFSET   0x000c  /* APB2 Peripheral reset register */
#define STM32_RCC_APB1RSTR_OFFSET   0x0010  /* APB1 Peripheral reset register */
#define STM32_RCC_AHBENR_OFFSET     0x0014  /* AHB Peripheral Clock enable register */
#define STM32_RCC_APB2ENR_OFFSET    0x0018  /* APB2 Peripheral Clock enable register */
#define STM32_RCC_APB1ENR_OFFSET    0x001c  /* APB1 Peripheral Clock enable register */
#define STM32_RCC_BDCR_OFFSET       0x0020  /* Backup domain control register */
#define STM32_RCC_CSR_OFFSET        0x0024  /* Control/status register */
#define STM32_RCC_AHBRSTR_OFFSET    0x0028  /* AHB Reset register */
#define STM32_RCC_CFGR2_OFFSET      0x002c  /* Clock configuration register 2 */
#define STM32_RCC_CFGR3_OFFSET      0x0030  /* Clock configuration register 3 */

/* Register Addresses ***************************************************************/

#define STM32_RCC_CR                (STM32_RCC_BASE+STM32_RCC_CR_OFFSET)
#define STM32_RCC_CFGR              (STM32_RCC_BASE+STM32_RCC_CFGR_OFFSET)
#define STM32_RCC_CIR               (STM32_RCC_BASE+STM32_RCC_CIR_OFFSET)
#define STM32_RCC_APB2RSTR          (STM32_RCC_BASE+STM32_RCC_APB2RSTR_OFFSET)
#define STM32_RCC_APB1RSTR          (STM32_RCC_BASE+STM32_RCC_APB1RSTR_OFFSET)
#define STM32_RCC_AHBENR            (STM32_RCC_BASE+STM32_RCC_AHBENR_OFFSET)
#define STM32_RCC_APB2ENR           (STM32_RCC_BASE+STM32_RCC_APB2ENR_OFFSET)
#define STM32_RCC_APB1ENR           (STM32_RCC_BASE+STM32_RCC_APB1ENR_OFFSET)
#define STM32_RCC_BDCR              (STM32_RCC_BASE+STM32_RCC_BDCR_OFFSET)
#define STM32_RCC_CSR               (STM32_RCC_BASE+STM32_RCC_CSR_OFFSET)
#define STM32_RCC_AHBRSTR           (STM32_RCC_BASE+STM32_RCC_AHBRSTR_OFFSET)
#define STM32_RCC_CFGR2             (STM32_RCC_BASE+STM32_RCC_CFGR2_OFFSET)
#define STM32_RCC_CFGR3             (STM32_RCC_BASE+STM32_RCC_CFGR3_OFFSET)

/* Register Bitfield Definitions ****************************************************/

/* Clock control register */

#define RCC_CR_HSION                (1 << 0)  /* Bit 0: Internal High Speed clock enable */
#define RCC_CR_HSIRDY               (1 << 1)  /* Bit 1: Internal High Speed clock ready flag */
#define RCC_CR_HSITRIM_SHIFT        (3)       /* Bits 7-3: Internal High Speed clock trimming */
#define RCC_CR_HSITRIM_MASK         (0x1f << RCC_CR_HSITRIM_SHIFT)
#define RCC_CR_HSICAL_SHIFT         (8)       /* Bits 15-8: Internal High Speed clock Calibration */
#define RCC_CR_HSICAL_MASK          (0xff << RCC_CR_HSICAL_SHIFT)
#define RCC_CR_HSEON                (1 << 16) /* Bit 16: External High Speed clock enable */
#define RCC_CR_HSERDY               (1 << 17) /* Bit 17: External High Speed clock ready flag */
#define RCC_CR_HSEBYP               (1 << 18) /* Bit 18: External High Speed clock Bypass */
#define RCC_CR_CSSON                (1 << 19) /* Bit 19: Clock Security System enable */
#define RCC_CR_PLLON                (1 << 24) /* Bit 24: PLL enable */
#define RCC_CR_PLLRDY               (1 << 25) /* Bit 25: PLL clock ready flag */

/* Clock configuration register */

#define RCC_CFGR_SW_SHIFT           (0)       /* Bits 1-0: System clock Switch */
#define RCC_CFGR_SW_MASK            (3 << RCC_CFGR_SW_SHIFT)
#  define RCC_CFGR_SW_HSI           (0 << RCC_CFGR_SW_SHIFT) /* 00: HSI selected as system clock */
#  define RCC_CFGR_SW_HSE           (1 << RCC_CFGR_SW_SHIFT) /* 01: HSE selected as system clock */
#  define RCC_CFGR_SW_PLL           (2 << RCC_CFGR_SW_SHIFT) /* 10: PLL selected as system clock */
#define RCC_CFGR_SWS_SHIFT          (2)       /* Bits 3-2: System Clock Switch Status */
#define RCC_CFGR_SWS_MASK           (3 << RCC_CFGR_SWS_SHIFT)
#  define RCC_CFGR_SWS_HSI          (0 << RCC_CFGR_SWS_SHIFT) /* 00: HSI oscillator used as system clock */
#  define RCC_CFGR_SWS_HSE          (1 << RCC_CFGR_SWS_SHIFT) /* 01: HSE oscillator used as system clock */
#  define RCC_CFGR_SWS_PLL          (2 << RCC_CFGR_SWS_SHIFT) /* 10: PLL used as system clock */
#define RCC_CFGR_HPRE_SHIFT         (4)       /* Bits 7-4: AHB prescaler */
#define RCC_CFGR_HPRE_MASK          (0x0f << RCC_CFGR_HPRE_SHIFT)
#  define RCC_CFGR_HPRE_SYSCLK      (0 << RCC_CFGR_HPRE_SHIFT) /* 0xxx: SYSCLK not divided */
#  define RCC_CFGR_HPRE_SYSCLKd2    (8 << RCC_CFGR_HPRE_SHIFT) /* 1000: SYSCLK divided by 2 */
#  define RCC_CFGR_HPRE_SYSCLKd4    (9 << RCC_CFGR_HPRE_SHIFT) /* 1001: SYSCLK divided by 4 */
#  define RCC_CFGR_HPRE_SYSCLKd8    (10 << RCC_CFGR_HPRE_SHIFT) /* 1010: SYSCLK divided by 8 */
#  define RCC_CFGR_HPRE_SYSCLKd16   (11 << RCC_CFGR_HPRE_SHIFT) /* 1011: SYSCLK divided by 16 */
#  define RCC_CFGR_HPRE_SYSCLKd64   (12 << RCC_CFGR_HPRE_SHIFT) /* 1100: SYSCLK divided by 64 */
#  define RCC_CFGR_HPRE_SYSCLKd128  (13 << RCC_CFGR_HPRE_SHIFT) /* 1101: SYSCLK divided by 128 */
#  define RCC_CFGR_HPRE_SYSCLKd256  (14 << RCC_CFGR_HPRE_SHIFT) /* 1110: SYSCLK divided by 256 */
#  define RCC_CFGR_HPRE_SYSCLKd512  (15 << RCC_CFGR_HPRE_SHIFT) /* 1111: SYSCLK divided by 512 */
#define RCC_CFGR_PPRE1_SHIFT        (8)       /* Bits 10-8: APB Low speed prescaler (APB1) */
#define RCC_CFGR_PPRE1_MASK         (7 << RCC_CFGR_PPRE1_SHIFT)
#  define RCC_CFGR_PPRE1_HCLK       (0 << RCC_CFGR_PPRE1_SHIFT) /* 0xx: HCLK not divided */
#  define RCC_CFGR_PPRE1_HCLKd2     (4 << RCC_CFGR_PPRE1_SHIFT) /* 100: HCLK divided by 2 */
#  define RCC_CFGR_PPRE1_HCLKd4     (5 << RCC_CFGR_PPRE1_SHIFT) /* 101: HCLK divided by 4 */
#  define RCC_CFGR_PPRE1_HCLKd8     (6 << RCC_CFGR_PPRE1_SHIFT) /* 110: HCLK divided by 8 */
#  define RCC_CFGR_PPRE1_HCLKd16    (7 << RCC_CFGR_PPRE1_SHIFT) /* 111: HCLK divided by 16 */
#define RCC_CFGR_PPRE2_SHIFT        (11)      /* Bits 13-11: APB High speed prescaler (APB2) */
#define RCC_CFGR_PPRE2_MASK         (7 << RCC_CFGR_PPRE2_SHIFT)
#  define RCC_CFGR_PPRE2_HCLK       (0 << RCC_CFGR_PPRE2_SHIFT) /* 0xx: HCLK not divided */
#  define RCC_CFGR_PPRE2_HCLKd2     (4 << RCC_CFGR_PPRE2_SHIFT) /* 100: HCLK divided by 2 */
#  define RCC_CFGR_PPRE2_HCLKd4     (5 << RCC_CFGR_PPRE2_SHIFT) /* 101: HCLK divided by 4 */
#  define RCC_CFGR_PPRE2_HCLKd8     (6 << RCC_CFGR_PPRE2_SHIFT) /* 110: HCLK divided by 8 */
#  define RCC_CFGR_PPRE2_HCLKd16    (7 << RCC_CFGR_PPRE2_SHIFT) /* 111: HCLK divided by 16 */
#define RCC_CFGR_PLLSRC             (1 << 16) /* Bit 16: PLL entry clock source */
#define RCC_CFGR_PLLXTPRE           (1 << 17) /* Bit 17: HSE divider for PLL entry */
#define RCC_CFGR_PLLMUL_SHIFT       (18)      /* Bits 21-18: PLL Multiplication Factor */
#define RCC_CFGR_PLLMUL_MASK        (0x0f << RCC_CFGR_PLLMUL_SHIFT)
#  define RCC_CFGR_PLLMUL_CLKx2     (0 << RCC_CFGR_PLLMUL_SHIFT)  /* 0000: PLL input clock x 2 */
#  define RCC_CFGR_PLLMUL_CLKx3     (1 << RCC_CFGR_PLLMUL_SHIFT)  /* 0001: PLL input clock x 3 */
#  define RCC_CFGR_PLLMUL_CLKx4     (2 << RCC_CFGR_PLLMUL_SHIFT)  /* 0010: PLL input clock x 4 */
#  define RCC_CFGR_PLLMUL_CLKx5     (3 << RCC_CFGR_PLLMUL_SHIFT)  /* 0011: PLL input clock x 5 */
#  define RCC_CFGR_PLLMUL_CLKx6     (4 << RCC_CFGR_PLLMUL_SHIFT)  /* 0100: PLL input clock x 6 */
#  define RCC_CFGR_PLLMUL_CLKx7     (5 << RCC_CFGR_PLLMUL_SHIFT)  /* 0101: PLL input clock x 7 */
#  define RCC_CFGR_PLLMUL_CLKx8     (6 << RCC_CFGR_PLLMUL_SHIFT)  /* 0110: PLL input clock x 8 */
#  define RCC_CFGR_PLLMUL_CLKx9     (7 << RCC_CFGR_PLLMUL_SHIFT)  /* 0111: PLL input clock x 9 */
#  define RCC_CFGR_PLLMUL_CLKx10    (8 << RCC_CFGR_PLLMUL_SHIFT)  /* 1000: PLL input clock x 10 */
#  define RCC_CFGR_PLLMUL_CLKx11    (9 << RCC_CFGR_PLLMUL_SHIFT)  /* 1001: PLL input clock x 11 */
#  define RCC_CFGR_PLLMUL_CLKx12    (10 << RCC_CFGR_PLLMUL_SHIFT) /* 1010: PLL input clock x 12 */
#  define RCC_CFGR_PLLMUL_CLKx13    (11 << RCC_CFGR_PLLMUL_SHIFT) /* 1011: PLL input clock x 13 */
#  define RCC_CFGR_PLLMUL_CLKx14    (12 << RCC_CFGR_PLLMUL_SHIFT) /* 1100: PLL input clock x 14 */
#  define RCC_CFGR_PLLMUL_CLKx15    (13 << RCC_CFGR_PLLMUL_SHIFT) /* 1101: PLL input clock x 15 */
#  define RCC_CFGR_PLLMUL_CLKx16    (14 << RCC_CFGR_PLLMUL_SHIFT) /* 111x: PLL input clock x 16 */
#define RCC_CFGR_USBPRE             (1 << 22) /* Bit 22: USB prescaler */
#define RCC_CFGR_I2SSRC             (1 << 23) /* Bit 23: I2S external clock source selection */
#define RCC_CFGR_MCO_SHIFT          (24)      /* Bits 26-24: Microcontroller Clock Output */
#define RCC_CFGR_MCO_MASK           (3 << RCC_CFGR_MCO_SHIFT)
#  define RCC_CFGR_MCO_DISABLED     (0 << RCC_CFGR_MCO_SHIFT)  /* 000: MCO output disabled, no clock on MCO */
#  define RCC_CFGR_MCO_LSICLK       (2 << RCC_CFGR_MCO_SHIFT)  /* 010: LSI clock selected */
#  define RCC_CFGR_MCO_LSECLK       (3 << RCC_CFGR_MCO_SHIFT)  /* 011: LSE clock selected */
#  define RCC_CFGR_MCO_SYSCLK       (4 << RCC_CFGR_MCO_SHIFT)  /* 100: System clock (SYSCLK) selected */
#  define RCC_CFGR_MCO_HSICLK       (5 << RCC_CFGR_MCO_SHIFT)  /* 101: HSI clock selected */
#  define RCC_CFGR_MCO_HSECLK       (6 << RCC_CFGR_MCO_SHIFT)  /* 101: HSE clock selected */
#  define RCC_CFGR_PLLCLKd2         (7 << RCC_CFGR_MCO_SHIFT)  /* 111: PLL clock divided by 2 selected */
#define RCC_CFGR_MCOF               (1 << 28) /* Bit 23: Microcontroller Clock Output Flag */

/* Clock interrupt register */

#define RCC_CIR_LSIRDYF             (1 << 0)  /* Bit 0: LSI Ready Interrupt flag */
#define RCC_CIR_LSERDYF             (1 << 1)  /* Bit 1: LSE Ready Interrupt flag */
#define RCC_CIR_HSIRDYF             (1 << 2)  /* Bit 2: HSI Ready Interrupt flag */
#define RCC_CIR_HSERDYF             (1 << 3)  /* Bit 3: HSE Ready Interrupt flag */
#define RCC_CIR_PLLRDYF             (1 << 4)  /* Bit 4: PLL Ready Interrupt flag */
#define RCC_CIR_CSSF                (1 << 7)  /* Bit 7: Clock Security System Interrupt flag */
#define RCC_CIR_LSIRDYIE            (1 << 8)  /* Bit 8: LSI Ready Interrupt Enable */
#define RCC_CIR_LSERDYIE            (1 << 9)  /* Bit 9: LSE Ready Interrupt Enable */
#define RCC_CIR_HSIRDYIE            (1 << 10) /* Bit 10: HSI Ready Interrupt Enable */
#define RCC_CIR_HSERDYIE            (1 << 11) /* Bit 11: HSE Ready Interrupt Enable */
#define RCC_CIR_PLLRDYIE            (1 << 12) /* Bit 12: PLL Ready Interrupt Enable */
#define RCC_CIR_LSIRDYC             (1 << 16) /* Bit 16: LSI Ready Interrupt Clear */
#define RCC_CIR_LSERDYC             (1 << 17) /* Bit 17: LSE Ready Interrupt Clear */
#define RCC_CIR_HSIRDYC             (1 << 18) /* Bit 18: HSI Ready Interrupt Clear */
#define RCC_CIR_HSERDYC             (1 << 19) /* Bit 19: HSE Ready Interrupt Clear */
#define RCC_CIR_PLLRDYC             (1 << 20) /* Bit 20: PLL Ready Interrupt Clear */
#define RCC_CIR_CSSC                (1 << 23) /* Bit 23: Clock Security System Interrupt Clear */

/* APB2 Peripheral reset register */

#define RCC_APB2RSTR_SYSCFGRST      (1 << 0)  /* Bit 0: SYSCFG, Comparators and operational amplifiers reset */
#define RCC_APB2RSTR_TIM1RST        (1 << 11) /* Bit 11: TIM1 Timer reset */
#define RCC_APB2RSTR_SPI1RST        (1 << 12) /* Bit 12: SPI 1 reset */
#define RCC_APB2RSTR_TIM8RST        (1 << 13) /* Bit 13: TIM8 Timer reset */
#define RCC_APB2RSTR_USART1RST      (1 << 14) /* Bit 14: USART1 reset */
#define RCC_APB2RSTR_TIM15RST       (1 << 16) /* Bit 16: TIM15 reset */
#define RCC_APB2RSTR_TIM16RST       (1 << 17) /* Bit 17: TIM16 reset */
#define RCC_APB2RSTR_TIM17RST       (1 << 18) /* Bit 18: TIM17 reset */

/* APB1 Peripheral reset register */

#define RCC_APB1RSTR_TIM2RST        (1 << 0)  /* Bit 0: Timer 2 reset */
#define RCC_APB1RSTR_TIM3RST        (1 << 1)  /* Bit 1: Timer 3 reset */
#define RCC_APB1RSTR_TIM4RST        (1 << 2)  /* Bit 2: Timer 4 reset */
#define RCC_APB1RSTR_TIM6RST        (1 << 4)  /* Bit 4: Timer 6 reset */
#define RCC_APB1RSTR_TIM7RST        (1 << 5)  /* Bit 5: Timer 7 reset */
#define RCC_APB1RSTR_WWDGRST        (1 << 11) /* Bit 11: Window Watchdog reset */
#define RCC_APB1RSTR_SPI2RST        (1 << 14) /* Bit 14: SPI 2 reset */
#define RCC_APB1RSTR_SPI3RST        (1 << 15) /* Bit 15: SPI 3 reset */
#define RCC_APB1RSTR_USART2RST      (1 << 17) /* Bit 17: USART 2 reset */
#define RCC_APB1RSTR_USART3RST      (1 << 18) /* Bit 18: USART 3 reset */
#define RCC_APB1RSTR_UART4RST       (1 << 19) /* Bit 19: UART 4 reset */
#define RCC_APB1RSTR_UART5RST       (1 << 20) /* Bit 20: UART 5 reset */
#define RCC_APB1RSTR_I2C1RST        (1 << 21) /* Bit 21: I2C 1 reset */
#define RCC_APB1RSTR_I2C2RST        (1 << 22) /* Bit 22: I2C 2 reset */
#define RCC_APB1RSTR_USBRST         (1 << 23) /* Bit 23: USB reset */
#define RCC_APB1RSTR_CAN1RST        (1 << 25) /* Bit 25: CAN1 reset */
#define RCC_APB1RSTR_PWRRST         (1 << 28) /* Bit 28: Power interface reset */
#define RCC_APB1RSTR_DACRST         (1 << 29) /* Bit 29: DAC interface reset */

/* AHB Peripheral Clock enable register */

#define RCC_AHBENR_DMA1EN           (1 << 0)  /* Bit 0: DMA1 clock enable */
#define RCC_AHBENR_DMA2EN           (1 << 1)  /* Bit 1: DMA2 clock enable */
#define RCC_AHBENR_SRAMEN           (1 << 2)  /* Bit 2: SRAM interface clock enable */
#define RCC_AHBENR_FLITFEN          (1 << 4)  /* Bit 4: FLITF clock enable */
#define RCC_AHBENR_CRCEN            (1 << 6)  /* Bit 6: CRC clock enable */
#define RCC_AHBENR_IOPAEN           (1 << 17) /* Bit 17: I/O port A clock enable */
#define RCC_AHBENR_IOPBEN           (1 << 18) /* Bit 17: I/O port B clock enable */
#define RCC_AHBENR_IOPCEN           (1 << 19) /* Bit 17: I/O port C clock enable */
#define RCC_AHBENR_IOPDEN           (1 << 20) /* Bit 17: I/O port D clock enable */
#define RCC_AHBENR_IOPEEN           (1 << 21) /* Bit 17: I/O port E clock enable */
#define RCC_AHBENR_IOPFEN           (1 << 22) /* Bit 17: I/O port F clock enable */
#define RCC_AHBENR_TSCEN            (1 << 24) /* Bit 24: TSCEN: Touch sensing controller clock enable */
#define RCC_AHBENR_ADC12EN          (1 << 28) /* Bit 28: ADC1 and ADC2 enable */
#define RCC_AHBENR_ADC34EN          (1 << 29) /* Bit 28: ADC3 and ADC4 enable */

/* APB2 Peripheral Clock enable register */

#define RCC_APB2ENR_SYSCFGEN        (1 << 0)  /* Bit 0: SYSCFG clock enable */
#define RCC_APB2ENR_TIM1EN          (1 << 11) /* Bit 11: TIM1 Timer clock enable */
#define RCC_APB2ENR_SPI1EN          (1 << 12) /* Bit 12: SPI 1 clock enable */
#define RCC_APB2ENR_TIM8EN          (1 << 13) /* Bit 13: TIM8 Timer clock enable */
#define RCC_APB2ENR_USART1EN        (1 << 14) /* Bit 14: USART1 clock enable */
#define RCC_APB2ENR_TIM15EN         (1 << 16) /* Bit 16: TIM15 clock enable */
#define RCC_APB2ENR_TIM16EN         (1 << 17) /* Bit 17: TIM16 clock enable */
#define RCC_APB2ENR_TIM17EN         (1 << 18) /* Bit 18: TIM17 clock enable */

/* APB1 Peripheral Clock enable register */

#define RCC_APB1ENR_TIM2EN          (1 << 0)  /* Bit 0: Timer 2 clock enable */
#define RCC_APB1ENR_TIM3EN          (1 << 1)  /* Bit 1: Timer 3 clock enable */
#define RCC_APB1ENR_TIM4EN          (1 << 2)  /* Bit 2: Timer 4 clock enable */
#define RCC_APB1ENR_TIM6EN          (1 << 4)  /* Bit 4: Timer 6 clock enable */
#define RCC_APB1ENR_TIM7EN          (1 << 5)  /* Bit 5: Timer 7 clock enable */
#define RCC_APB1ENR_WWDGEN          (1 << 11) /* Bit 11: Window Watchdog clock enable */
#define RCC_APB1ENR_SPI2EN          (1 << 14) /* Bit 14: SPI 2 clock enable */
#define RCC_APB1ENR_SPI3EN          (1 << 15) /* Bit 15: SPI 3 clock enable */
#define RCC_APB1ENR_USART2EN        (1 << 17) /* Bit 17: USART 2 clock enable */
#define RCC_APB1ENR_USART3EN        (1 << 18) /* Bit 18: USART 3 clock enable */
#define RCC_APB1ENR_UART4EN         (1 << 19) /* Bit 19: UART 4 clock enable */
#define RCC_APB1ENR_UART5EN         (1 << 20) /* Bit 20: UART 5 clock enable */
#define RCC_APB1ENR_I2C1EN          (1 << 21) /* Bit 21: I2C 1 clock enable */
#define RCC_APB1ENR_I2C2EN          (1 << 22) /* Bit 22: I2C 2 clock enable */
#define RCC_APB1ENR_USBEN           (1 << 23) /* Bit 23: USB clock enable */
#define RCC_APB1ENR_CAN1EN          (1 << 25) /* Bit 25: CAN1 clock enable */
#define RCC_APB1ENR_PWREN           (1 << 28) /* Bit 28: Power interface clock enable */
#define RCC_APB1ENR_DACEN           (1 << 29) /* Bit 29: DAC interface clock enable */

/* Backup domain control register */

#define RCC_BDCR_LSEON              (1 << 0)  /* Bit 0: External Low Speed oscillator enable */
#define RCC_BDCR_LSERDY             (1 << 1)  /* Bit 1: External Low Speed oscillator Ready */
#define RCC_BDCR_LSEBYP             (1 << 2)  /* Bit 2: External Low Speed oscillator Bypass */
#define RCC_BDCR_LSEDRV_SHIFT       (3)       /* Bits 4:3: LSE oscillator drive capability */
#define RCC_BDCR_LSEDRV_MASK        (3 << RCC_BDCR_LSEDRV_SHIFT)
#  define RCC_BDCR_LSEDRV_LOW       (0 << RCC_BDCR_LSEDRV_SHIFT) /* 'Xtal mode' lower driving capability */
#  define RCC_BDCR_LSEDRV_MEDLOW    (1 << RCC_BDCR_LSEDRV_SHIFT) /* 'Xtal mode' medium low driving capability */
#  define RCC_BDCR_LSEDRV_MEDHIGH   (2 << RCC_BDCR_LSEDRV_SHIFT) /* 'Xtal mode' medium high driving capability */
#  define RCC_BDCR_LSEDRV_HIGH      (3 << RCC_BDCR_LSEDRV_SHIFT) /* 'Xtal mode' higher driving capability */
#define RCC_BDCR_RTCSEL_SHIFT       (8)       /* Bits 9:8: RTC clock source selection */
#define RCC_BDCR_RTCSEL_MASK        (3 << RCC_BDCR_RTCSEL_SHIFT)
#  define RCC_BDCR_RTCSEL_NOCLK     (0 << RCC_BDCR_RTCSEL_SHIFT) /* 00: No clock */
#  define RCC_BDCR_RTCSEL_LSE       (1 << RCC_BDCR_RTCSEL_SHIFT) /* 01: LSE oscillator clock used as RTC clock */
#  define RCC_BDCR_RTCSEL_LSI       (2 << RCC_BDCR_RTCSEL_SHIFT) /* 10: LSI oscillator clock used as RTC clock */
#  define RCC_BDCR_RTCSEL_HSE       (3 << RCC_BDCR_RTCSEL_SHIFT) /* 11: HSE oscillator clock divided by 128 used as RTC clock */
#define RCC_BDCR_RTCEN              (1 << 15) /* Bit 15: RTC clock enable */
#define RCC_BDCR_BDRST              (1 << 16) /* Bit 16: Backup domain software reset */

/* Control/status register */

#define RCC_CSR_LSION               (1 << 0)  /* Bit 0: Internal Low Speed oscillator enable */
#define RCC_CSR_LSIRDY              (1 << 1)  /* Bit 1: Internal Low Speed oscillator Ready */
#define RCC_CSR_RMVF                (1 << 24) /* Bit 24: Remove reset flag */
#define RCC_CSR_OBLRSTF             (1 << 25) /* Bit 25: Option byte loader reset flag */
#define RCC_CSR_PINRSTF             (1 << 26) /* Bit 26: PIN reset flag */
#define RCC_CSR_PORRSTF             (1 << 27) /* Bit 27: POR/PDR reset flag */
#define RCC_CSR_SFTRSTF             (1 << 28) /* Bit 28: Software Reset flag */
#define RCC_CSR_IWDGRSTF            (1 << 29) /* Bit 29: Independent Watchdog reset flag */
#define RCC_CSR_WWDGRSTF            (1 << 30) /* Bit 30: Window watchdog reset flag */
#define RCC_CSR_LPWRRSTF            (1 << 31) /* Bit 31: Low-Power reset flag */

/* AHB peripheral clock reset register (RCC_AHBRSTR) */

#define RCC_AHBRSTR_IOPARST         (1 << 17) /* Bit 17: I/O port A reset */
#define RCC_AHBRSTR_IOPBRST         (1 << 18) /* Bit 18: I/O port B reset */
#define RCC_AHBRSTR_IOPCRST         (1 << 29) /* Bit 19: I/O port C reset */
#define RCC_AHBRSTR_IOPDRST         (1 << 20) /* Bit 20: I/O port D reset */
#define RCC_AHBRSTR_IOPERST         (1 << 21) /* Bit 21: I/O port E reset */
#define RCC_AHBRSTR_IOPFRST         (1 << 22) /* Bit 22: I/O port F reset */
#define RCC_AHBRSTR_TSCRST          (1 << 24) /* Bit 24: Touch sensing controller reset */
#define RCC_AHBRSTR_ADC12RST        (1 << 28) /* Bit 28: ADC1 and ADC2 reset */
#define RCC_AHBRSTR_ADC34RST        (1 << 29) /* Bit 29: ADC3 and ADC4 reset */

/* Clock configuration register 2 */

#define RCC_CFGR2_PREDIV_SHIFT      (0)       /* Bits 0-3: PREDIV division factor */
#define RCC_CFGR2_PREDIV_MASK       (15 << RCC_CFGR2_PREDIV_SHIFT)
#  define RCC_CFGR2_PREDIVd1        (0 << RCC_CFGR2_PREDIV_SHIFT)  /* 0000: HSE input to PLL not divided */
#  define RCC_CFGR2_PREDIVd2        (1 << RCC_CFGR2_PREDIV_SHIFT)  /* 0001: HSE input to PLL divided by 2 */
#  define RCC_CFGR2_PREDIVd3        (2 << RCC_CFGR2_PREDIV_SHIFT)  /* 0010: HSE input to PLL divided by 3 */
#  define RCC_CFGR2_PREDIVd4        (3 << RCC_CFGR2_PREDIV_SHIFT)  /* 0011: HSE input to PLL divided by 4 */
#  define RCC_CFGR2_PREDIVd5        (4 << RCC_CFGR2_PREDIV_SHIFT)  /* 0100: HSE input to PLL divided by 5 */
#  define RCC_CFGR2_PREDIVd6        (5 << RCC_CFGR2_PREDIV_SHIFT)  /* 0101: HSE input to PLL divided by 6 */
#  define RCC_CFGR2_PREDIVd7        (6 << RCC_CFGR2_PREDIV_SHIFT)  /* 0110: HSE input to PLL divided by 7 */
#  define RCC_CFGR2_PREDIVd8        (7 << RCC_CFGR2_PREDIV_SHIFT)  /* 0111: HSE input to PLL divided by 8 */
#  define RCC_CFGR2_PREDIVd9        (8 << RCC_CFGR2_PREDIV_SHIFT)  /* 1000: HSE input to PLL divided by 9 */
#  define RCC_CFGR2_PREDIVd10       (9 << RCC_CFGR2_PREDIV_SHIFT)  /* 1001: HSE input to PLL divided by 10 */
#  define RCC_CFGR2_PREDIVd11       (10 << RCC_CFGR2_PREDIV_SHIFT) /* 1010: HSE input to PLL divided by 11 */
#  define RCC_CFGR2_PREDIVd12       (11 << RCC_CFGR2_PREDIV_SHIFT) /* 1011: HSE input to PLL divided by 12 */
#  define RCC_CFGR2_PREDIVd13       (12 << RCC_CFGR2_PREDIV_SHIFT) /* 1100: HSE input to PLL divided by 13 */
#  define RCC_CFGR2_PREDIVd14       (13 << RCC_CFGR2_PREDIV_SHIFT) /* 1101: HSE input to PLL divided by 14 */
#  define RCC_CFGR2_PREDIVd15       (14 << RCC_CFGR2_PREDIV_SHIFT) /* 1110: HSE input to PLL divided by 15 */
#  define RCC_CFGR2_PREDIVd16       (15 << RCC_CFGR2_PREDIV_SHIFT) /* 1111: HSE input to PLL divided by 16 */
#define RCC_CFGR2_ADC12PRES_SHIFT   (4)       /* Bits 4-8: ADC12 prescaler */
#define RCC_CFGR2_ADC12PRES_MASK    (31 << RCC_CFGR2_ADC12PRES_SHIFT)
#  define RCC_CFGR2_ADC12DISABLED   (0 << RCC_CFGR2_ADC12PRES_SHIFT)  /* 0xxxx: ADC12 clock disabled */
#  define RCC_CFGR2_ADC12PRESd1     (16 << RCC_CFGR2_ADC12PRES_SHIFT) /* 10000: PLL clock divided by 1 */
#  define RCC_CFGR2_ADC12PRESd2     (17 << RCC_CFGR2_ADC12PRES_SHIFT) /* 10001: PLL clock divided by 2 */
#  define RCC_CFGR2_ADC12PRESd4     (18 << RCC_CFGR2_ADC12PRES_SHIFT) /* 10010: PLL clock divided by 4 */
#  define RCC_CFGR2_ADC12PRESd6     (16 << RCC_CFGR2_ADC12PRES_SHIFT) /* 10011: PLL clock divided by 6 */
#  define RCC_CFGR2_ADC12PRESd8     (20 << RCC_CFGR2_ADC12PRES_SHIFT) /* 10100: PLL clock divided by 8 */
#  define RCC_CFGR2_ADC12PRESd10    (21 << RCC_CFGR2_ADC12PRES_SHIFT) /* 10101: PLL clock divided by 10 */
#  define RCC_CFGR2_ADC12PRESd12    (22 << RCC_CFGR2_ADC12PRES_SHIFT) /* 10110: PLL clock divided by 12 */
#  define RCC_CFGR2_ADC12PRESd16    (23 << RCC_CFGR2_ADC12PRES_SHIFT) /* 10111: PLL clock divided by 16 */
#  define RCC_CFGR2_ADC12PRESd32    (24 << RCC_CFGR2_ADC12PRES_SHIFT) /* 11000: PLL clock divided by 32 */
#  define RCC_CFGR2_ADC12PRESd64    (25 << RCC_CFGR2_ADC12PRES_SHIFT) /* 11001: PLL clock divided by 64 */
#  define RCC_CFGR2_ADC12PRESd128   (26 << RCC_CFGR2_ADC12PRES_SHIFT) /* 11010: PLL clock divided by 128 */
#  define RCC_CFGR2_ADC12PRESd256   (27 << RCC_CFGR2_ADC12PRES_SHIFT) /* 11011: PLL clock divided by 256 */
#define RCC_CFGR2_ADC34PRES_SHIFT   (9)       /* Bits 9-13: ADC34 prescaler */
#define RCC_CFGR2_ADC34PRES_MASK    (31 << RCC_CFGR2_ADC34PRES_SHIFT)
#  define RCC_CFGR2_ADC34DISABLED   (0 << RCC_CFGR2_ADC34PRES_SHIFT)  /* 0xxxx: ADC34 clock disabled */
#  define RCC_CFGR2_ADC34PRESd1     (16 << RCC_CFGR2_ADC34PRES_SHIFT) /* 10000: PLL clock divided by 1 */
#  define RCC_CFGR2_ADC34PRESd2     (17 << RCC_CFGR2_ADC34PRES_SHIFT) /* 10001: PLL clock divided by 2 */
#  define RCC_CFGR2_ADC34PRESd4     (18 << RCC_CFGR2_ADC34PRES_SHIFT) /* 10010: PLL clock divided by 4 */
#  define RCC_CFGR2_ADC34PRESd6     (16 << RCC_CFGR2_ADC34PRES_SHIFT) /* 10011: PLL clock divided by 6 */
#  define RCC_CFGR2_ADC34PRESd8     (20 << RCC_CFGR2_ADC34PRES_SHIFT) /* 10100: PLL clock divided by 8 */
#  define RCC_CFGR2_ADC34PRESd10    (21 << RCC_CFGR2_ADC34PRES_SHIFT) /* 10101: PLL clock divided by 10 */
#  define RCC_CFGR2_ADC34PRESd12    (22 << RCC_CFGR2_ADC34PRES_SHIFT) /* 10110: PLL clock divided by 12 */
#  define RCC_CFGR2_ADC34PRESd16    (23 << RCC_CFGR2_ADC34PRES_SHIFT) /* 10111: PLL clock divided by 16 */
#  define RCC_CFGR2_ADC34PRESd32    (24 << RCC_CFGR2_ADC34PRES_SHIFT) /* 11000: PLL clock divided by 32 */
#  define RCC_CFGR2_ADC34PRESd64    (25 << RCC_CFGR2_ADC34PRES_SHIFT) /* 11001: PLL clock divided by 64 */
#  define RCC_CFGR2_ADC34PRESd128   (26 << RCC_CFGR2_ADC34PRES_SHIFT) /* 11010: PLL clock divided by 128 */
#  define RCC_CFGR2_ADC34PRESd256   (27 << RCC_CFGR2_ADC34PRES_SHIFT) /* 11011: PLL clock divided by 256 */

/* Clock configuration register 2 */

#define RCC_CFGR3_USART1SW_SHIFT    (9)       /* Bits 0-1: USART1 clock source selection */
#define RCC_CFGR3_USART1SW_MASK     (3 << RCC_CFGR3_USART1SW_SHIFT)
#  define RCC_CFGR3_USART1SW_PCLK   (0 << RCC_CFGR3_USART1SW_SHIFT) /* PCLK */
#  define RCC_CFGR3_USART1SW_SYSCLK (1 << RCC_CFGR3_USART1SW_SHIFT) /* System clock (SYSCLK) */
#  define RCC_CFGR3_USART1SW_LSE    (2 << RCC_CFGR3_USART1SW_SHIFT) /* LSE clock */
#  define RCC_CFGR3_USART1SW_HSI    (0 << RCC_CFGR3_USART1SW_SHIFT) /* HSI clock */
#define RCC_CFGR3_I2C1SW            (1 << 4)  /* Bit 4: I2C1 clock source selection */
#define RCC_CFGR3_I2C2SW            (1 << 5)  /* Bit 5: I2C2 clock source selection */
#define RCC_CFGR3_TIM1SW            (1 << 8)  /* Bit 8: Timer1 clock source selection */
#define RCC_CFGR3_TIM8SW            (1 << 9)  /* Bit 9: Timer8 clock source selection */
#define RCC_CFGR3_USART2SW_SHIFT    (16)      /* Bits 16-17: USART2 clock source selection */
#define RCC_CFGR3_USART2SW_MASK     (3 << RCC_CFGR3_USART2SW_SHIFT)
#  define RCC_CFGR3_USART2SW_PCLK   (0 << RCC_CFGR3_USART2SW_SHIFT) /* PCLK */
#  define RCC_CFGR3_USART2SW_SYSCLK (1 << RCC_CFGR3_USART2SW_SHIFT) /* System clock (SYSCLK) */
#  define RCC_CFGR3_USART2SW_LSE    (2 << RCC_CFGR3_USART2SW_SHIFT) /* LSE clock */
#  define RCC_CFGR3_USART2SW_HSI    (0 << RCC_CFGR3_USART2SW_SHIFT) /* HSI clock */
#define RCC_CFGR3_USART3SW_SHIFT    (18)      /* Bits 18-19: USART3 clock source selection */
#define RCC_CFGR3_USART3SW_MASK     (3 << RCC_CFGR3_USART3SW_SHIFT)
#  define RCC_CFGR3_USART3SW_PCLK   (0 << RCC_CFGR3_USART3SW_SHIFT) /* PCLK */
#  define RCC_CFGR3_USART3SW_SYSCLK (1 << RCC_CFGR3_USART3SW_SHIFT) /* System clock (SYSCLK) */
#  define RCC_CFGR3_USART3SW_LSE    (2 << RCC_CFGR3_USART3SW_SHIFT) /* LSE clock */
#  define RCC_CFGR3_USART3SW_HSI    (0 << RCC_CFGR3_USART3SW_SHIFT) /* HSI clock */
#define RCC_CFGR3_UART4SW_SHIFT     (20)      /* Bits 20-21: UART4 clock source selection */
#define RCC_CFGR3_UART4SW_MASK      (3 << RCC_CFGR3_UART4SW_SHIFT)
#  define RCC_CFGR3_UART4SW_PCLK    (0 << RCC_CFGR3_UART4SW_SHIFT) /* PCLK */
#  define RCC_CFGR3_UART4SW_SYSCLK  (1 << RCC_CFGR3_UART4SW_SHIFT) /* System clock (SYSCLK) */
#  define RCC_CFGR3_UART4SW_LSE     (2 << RCC_CFGR3_UART4SW_SHIFT) /* LSE clock */
#  define RCC_CFGR3_UART4SW_HSI     (0 << RCC_CFGR3_UART4SW_SHIFT) /* HSI clock */
#define RCC_CFGR3_UART5SW_SHIFT     (22)      /* Bits 22-23: UART5 clock source selection */
#define RCC_CFGR3_UART5SW_MASK      (3 << RCC_CFGR3_UART5SW_SHIFT)
#  define RCC_CFGR3_UART5SW_PCLK    (0 << RCC_CFGR3_UART5SW_SHIFT) /* PCLK */
#  define RCC_CFGR3_UART5SW_SYSCLK  (1 << RCC_CFGR3_UART5SW_SHIFT) /* System clock (SYSCLK) */
#  define RCC_CFGR3_UART5SW_LSE     (2 << RCC_CFGR3_UART5SW_SHIFT) /* LSE clock */
#  define RCC_CFGR3_UART5SW_HSI     (0 << RCC_CFGR3_UART5SW_SHIFT) /* HSI clock */

#endif /* __ARCH_ARM_SRC_STM32_CHIP_STM32F30XXX_RCC_H */