1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
|
/****************************************************************************
* arch/arm/src/stm32/stm32_gpio.c
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Copyright (C) 2011 Uros Platise. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
* Uros Platise <uros.platise@isotel.eu>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <errno.h>
#include <debug.h>
#include <arch/irq.h>
#include "up_arch.h"
#include "chip.h"
#include "stm32_gpio.h"
#if defined(CONFIG_STM32_STM32F20XX) || defined(CONFIG_STM32_STM32F40XX)
# include "chip/stm32_syscfg.h"
#endif
/****************************************************************************
* Private Types
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
/* Base addresses for each GPIO block */
const uint32_t g_gpiobase[STM32_NGPIO_PORTS] =
{
#if STM32_NGPIO_PORTS > 0
STM32_GPIOA_BASE,
#endif
#if STM32_NGPIO_PORTS > 1
STM32_GPIOB_BASE,
#endif
#if STM32_NGPIO_PORTS > 2
STM32_GPIOC_BASE,
#endif
#if STM32_NGPIO_PORTS > 3
STM32_GPIOD_BASE,
#endif
#if STM32_NGPIO_PORTS > 4
STM32_GPIOE_BASE,
#endif
#if STM32_NGPIO_PORTS > 5
STM32_GPIOF_BASE,
#endif
#if STM32_NGPIO_PORTS > 6
STM32_GPIOG_BASE,
#endif
#if STM32_NGPIO_PORTS > 7
STM32_GPIOH_BASE,
#endif
#if STM32_NGPIO_PORTS > 8
STM32_GPIOI_BASE,
#endif
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Function: stm32_gpioremap
*
* Description:
*
* Based on configuration within the .config file, this function will
* remaps positions of alternative functions.
*
****************************************************************************/
static inline void stm32_gpioremap(void)
{
#if defined(CONFIG_STM32_STM32F10XX)
/* Remap according to the configuration within .config file */
uint32_t val = 0;
#ifdef CONFIG_STM32_JTAG_FULL_ENABLE
/* The reset default */
#elif CONFIG_STM32_JTAG_NOJNTRST_ENABLE
val |= AFIO_MAPR_SWJ; /* enabled but without JNTRST */
#elif CONFIG_STM32_JTAG_SW_ENABLE
val |= AFIO_MAPR_SWDP; /* set JTAG-DP disabled and SW-DP enabled */
#else
val |= AFIO_MAPR_DISAB; /* set JTAG-DP and SW-DP Disabled */
#endif
#ifdef CONFIG_STM32_TIM1_FULL_REMAP
val |= AFIO_MAPR_TIM1_FULLREMAP;
#endif
#ifdef CONFIG_STM32_TIM1_PARTIAL_REMAP
val |= AFIO_MAPR_TIM1_PARTREMAP;
#endif
#ifdef CONFIG_STM32_TIM2_FULL_REMAP
val |= AFIO_MAPR_TIM2_FULLREMAP;
#endif
#ifdef CONFIG_STM32_TIM2_PARTIAL_REMAP_1
val |= AFIO_MAPR_TIM2_PARTREMAP1;
#endif
#ifdef CONFIG_STM32_TIM2_PARTIAL_REMAP_2
val |= AFIO_MAPR_TIM2_PARTREMAP2;
#endif
#ifdef CONFIG_STM32_TIM3_FULL_REMAP
val |= AFIO_MAPR_TIM3_FULLREMAP;
#endif
#ifdef CONFIG_STM32_TIM3_PARTIAL_REMAP
val |= AFIO_MAPR_TIM3_PARTREMAP;
#endif
#ifdef CONFIG_STM32_TIM4_REMAP
val |= AFIO_MAPR_TIM4_REMAP;
#endif
#ifdef CONFIG_STM32_USART1_REMAP
val |= AFIO_MAPR_USART1_REMAP;
#endif
#ifdef CONFIG_STM32_USART2_REMAP
val |= AFIO_MAPR_USART2_REMAP;
#endif
#ifdef CONFIG_STM32_USART3_FULL_REMAP
val |= AFIO_MAPR_USART3_FULLREMAP;
#endif
#ifdef CONFIG_STM32_USART3_PARTIAL_REMAP
val |= AFIO_MAPR_USART3_PARTREMAP;
#endif
#ifdef CONFIG_STM32_SPI1_REMAP
val |= AFIO_MAPR_SPI1_REMAP;
#endif
#ifdef CONFIG_STM32_SPI3_REMAP
#endif
#ifdef CONFIG_STM32_I2C1_REMAP
val |= AFIO_MAPR_I2C1_REMAP;
#endif
#ifdef CONFIG_STM32_CAN1_REMAP1
val |= AFIO_MAPR_PB89;
#endif
#ifdef CONFIG_STM32_CAN1_REMAP2
val |= AFIO_MAPR_PD01;
#endif
putreg32(val, STM32_AFIO_MAPR);
#endif
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Function: stm32_gpioinit
*
* Description:
* Based on configuration within the .config file, it does:
* - Remaps positions of alternative functions.
*
* Typically called from stm32_start().
*
* Assumptions:
* This function is called early in the initialization sequence so that
* no mutual exlusion is necessary.
*
****************************************************************************/
void stm32_gpioinit(void)
{
/* Remap according to the configuration within .config file */
stm32_gpioremap();
}
/****************************************************************************
* Name: stm32_configgpio
*
* Description:
* Configure a GPIO pin based on bit-encoded description of the pin.
* Once it is configured as Alternative (GPIO_ALT|GPIO_CNF_AFPP|...)
* function, it must be unconfigured with stm32_unconfiggpio() with
* the same cfgset first before it can be set to non-alternative function.
*
* Returns:
* OK on success
* A negated errono valu on invalid port, or when pin is locked as ALT
* function.
*
* To-Do: Auto Power Enable
****************************************************************************/
/****************************************************************************
* Name: stm32_configgpio (for the STM32F10xxx family)
****************************************************************************/
#if defined(CONFIG_STM32_STM32F10XX)
int stm32_configgpio(uint32_t cfgset)
{
uint32_t base;
uint32_t cr;
uint32_t regval;
uint32_t regaddr;
unsigned int port;
unsigned int pin;
unsigned int pos;
unsigned int modecnf;
irqstate_t flags;
bool input;
/* Verify that this hardware supports the select GPIO port */
port = (cfgset & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
if (port >= STM32_NGPIO_PORTS)
{
return -EINVAL;
}
/* Get the port base address */
base = g_gpiobase[port];
/* Get the pin number and select the port configuration register for that
* pin
*/
pin = (cfgset & GPIO_PIN_MASK) >> GPIO_PIN_SHIFT;
if (pin < 8)
{
cr = base + STM32_GPIO_CRL_OFFSET;
pos = pin;
}
else
{
cr = base + STM32_GPIO_CRH_OFFSET;
pos = pin - 8;
}
/* Input or output? */
input = ((cfgset & GPIO_INPUT) != 0);
/* Interrupts must be disabled from here on out so that we have mutually
* exclusive access to all of the GPIO configuration registers.
*/
flags = irqsave();
/* Decode the mode and configuration */
regval = getreg32(cr);
if (input)
{
/* Input.. force mode = INPUT */
modecnf = 0;
}
else
{
/* Output or alternate function */
modecnf = (cfgset & GPIO_MODE_MASK) >> GPIO_MODE_SHIFT;
}
modecnf |= ((cfgset & GPIO_CNF_MASK) >> GPIO_CNF_SHIFT) << 2;
/* Set the port configuration register */
regval &= ~(GPIO_CR_MODECNF_MASK(pos));
regval |= (modecnf << GPIO_CR_MODECNF_SHIFT(pos));
putreg32(regval, cr);
/* Set or reset the corresponding BRR/BSRR bit */
if (!input)
{
/* It is an output or an alternate function. We have to look at the CNF
* bits to know which.
*/
unsigned int cnf = (cfgset & GPIO_CNF_MASK);
if (cnf != GPIO_CNF_OUTPP && cnf != GPIO_CNF_OUTOD)
{
/* Its an alternate function pin... we can return early */
irqrestore(flags);
return OK;
}
}
else
{
/* It is an input pin... Should it configured as an EXTI interrupt? */
if ((cfgset & GPIO_EXTI) != 0)
{
int shift;
/* Yes.. Set the bits in the EXTI CR register */
regaddr = STM32_AFIO_EXTICR(pin);
regval = getreg32(regaddr);
shift = AFIO_EXTICR_EXTI_SHIFT(pin);
regval &= ~(AFIO_EXTICR_PORT_MASK << shift);
regval |= (((uint32_t)port) << shift);
putreg32(regval, regaddr);
}
if ((cfgset & GPIO_CNF_MASK) != GPIO_CNF_INPULLUD)
{
/* Neither... we can return early */
irqrestore(flags);
return OK;
}
}
/* If it is an output... set the pin to the correct initial state.
* If it is pull-down or pull up, then we need to set the ODR
* appropriately for that function.
*/
if ((cfgset & GPIO_OUTPUT_SET) != 0)
{
/* Use the BSRR register to set the output */
regaddr = base + STM32_GPIO_BSRR_OFFSET;
}
else
{
/* Use the BRR register to clear */
regaddr = base + STM32_GPIO_BRR_OFFSET;
}
regval = getreg32(regaddr);
regval |= (1 << pin);
putreg32(regval, regaddr);
irqrestore(flags);
return OK;
}
#endif
/****************************************************************************
* Name: stm32_configgpio (for the STM2F20xxx and STM32F40xxx family)
****************************************************************************/
#if defined(CONFIG_STM32_STM32F20XX) || defined(CONFIG_STM32_STM32F40XX)
int stm32_configgpio(uint32_t cfgset)
{
uintptr_t base;
uint32_t regval;
uint32_t setting;
unsigned int regoffset;
unsigned int port;
unsigned int pin;
unsigned int pos;
unsigned int pinmode;
irqstate_t flags;
/* Verify that this hardware supports the select GPIO port */
port = (cfgset & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
if (port >= STM32_NGPIO_PORTS)
{
return -EINVAL;
}
/* Get the port base address */
base = g_gpiobase[port];
/* Get the pin number and select the port configuration register for that
* pin
*/
pin = (cfgset & GPIO_PIN_MASK) >> GPIO_PIN_SHIFT;
/* Set up the mode register (and remember whether the pin mode) */
switch (cfgset & GPIO_MODE_MASK)
{
default:
case GPIO_INPUT: /* Input mode */
pinmode = GPIO_MODER_INPUT;
break;
case GPIO_OUTPUT: /* General purpose output mode */
pinmode = GPIO_MODER_OUTPUT;
break;
case GPIO_ALT: /* Alternate function mode */
pinmode = GPIO_MODER_ALT;
break;
case GPIO_ANALOG: /* Analog mode */
pinmode = GPIO_MODER_ANALOG;
break;
}
/* Interrupts must be disabled from here on out so that we have mutually
* exclusive access to all of the GPIO configuration registers.
*/
flags = irqsave();
/* Now apply the configuration to the mode register */
regval = getreg32(base + STM32_GPIO_MODER_OFFSET);
regval &= ~GPIO_MODER_MASK(pin);
regval |= ((uint32_t)pinmode << GPIO_MODER_SHIFT(pin));
putreg32(regval, base + STM32_GPIO_MODER_OFFSET);
/* Set up the pull-up/pull-down configuration (all but analog pins) */
setting = GPIO_PUPDR_NONE;
if (pinmode != GPIO_MODER_ANALOG)
{
switch (cfgset & GPIO_PUPD_MASK)
{
default:
case GPIO_FLOAT: /* No pull-up, pull-down */
break;
case GPIO_PULLUP: /* Pull-up */
setting = GPIO_PUPDR_PULLUP;
break;
case GPIO_PULLDOWN: /* Pull-down */
setting = GPIO_PUPDR_PULLDOWN;
break;
}
}
regval = getreg32(base + STM32_GPIO_PUPDR_OFFSET);
regval &= ~GPIO_PUPDR_MASK(pin);
regval |= (setting << GPIO_PUPDR_SHIFT(pin));
putreg32(regval, base + STM32_GPIO_PUPDR_OFFSET);
/* Set the alternate function (Only alternate function pins) */
if (pinmode == GPIO_MODER_ALT)
{
setting = (cfgset & GPIO_AF_MASK) >> GPIO_AF_SHIFT;
}
else
{
setting = 0;
}
if (pin < 8)
{
regoffset = STM32_GPIO_AFRL_OFFSET;
pos = pin;
}
else
{
regoffset = STM32_GPIO_ARFH_OFFSET;
pos = pin - 8;
}
regval = getreg32(base + regoffset);
regval &= ~GPIO_AFR_MASK(pos);
regval |= (setting << GPIO_AFR_SHIFT(pos));
putreg32(regval, base + regoffset);
/* Set speed (Only outputs and alternate function pins) */
if (pinmode == GPIO_MODER_OUTPUT || pinmode == GPIO_MODER_ALT)
{
switch (cfgset & GPIO_SPEED_MASK)
{
default:
case GPIO_SPEED_2MHz: /* 2 MHz Low speed output */
setting = GPIO_OSPEED_2MHz;
break;
case GPIO_SPEED_25MHz: /* 25 MHz Medium speed output */
setting = GPIO_OSPEED_25MHz;
break;
case GPIO_SPEED_50MHz: /* 50 MHz Fast speed output */
setting = GPIO_OSPEED_50MHz;
break;
case GPIO_SPEED_100MHz: /* 100 MHz High speed output */
setting = GPIO_OSPEED_100MHz;
break;
}
}
else
{
setting = 0;
}
regval = getreg32(base + STM32_GPIO_OSPEED_OFFSET);
regval &= ~GPIO_OSPEED_MASK(pin);
regval |= (setting << GPIO_OSPEED_SHIFT(pin));
putreg32(regval, base + STM32_GPIO_OSPEED_OFFSET);
/* Set push-pull/open-drain (Only outputs and alternate function pins) */
regval = getreg32(base + STM32_GPIO_OTYPER_OFFSET);
setting = GPIO_OTYPER_OD(pin);
if ((pinmode == GPIO_MODER_OUTPUT || pinmode == GPIO_MODER_ALT) &&
(cfgset & GPIO_OPENDRAIN) != 0)
{
regval |= setting;
}
else
{
regval &= ~setting;
}
putreg32(regval, base + STM32_GPIO_OTYPER_OFFSET);
/* If it is an output... set the pin to the correct initial state. */
if (pinmode == GPIO_MODER_OUTPUT)
{
bool value = ((cfgset & GPIO_OUTPUT_SET) != 0);
stm32_gpiowrite(cfgset, value);
}
/* Otherwise, it is an input pin. Should it configured as an EXTI interrupt? */
else if ((cfgset & GPIO_EXTI) != 0)
{
/* "In STM32 F1 the selection of the EXTI line source is performed through
* the EXTIx bits in the AFIO_EXTICRx registers, while in F2 series this
* selection is done through the EXTIx bits in the SYSCFG_EXTICRx registers.
*
* "Only the mapping of the EXTICRx registers has been changed, without any
* changes to the meaning of the EXTIx bits. However, the range of EXTI
* bits values has been extended to 0b1000 to support the two ports added
* in F2, port H and I (in F1 series the maximum value is 0b0110)."
*/
uint32_t regaddr;
int shift;
/* Set the bits in the SYSCFG EXTICR register */
regaddr = STM32_SYSCFG_EXTICR(pin);
regval = getreg32(regaddr);
shift = SYSCFG_EXTICR_EXTI_SHIFT(pin);
regval &= ~(SYSCFG_EXTICR_PORT_MASK << shift);
regval |= (((uint32_t)port) << shift);
putreg32(regval, regaddr);
}
irqrestore(flags);
return OK;
}
#endif
/****************************************************************************
* Name: stm32_unconfiggpio
*
* Description:
* Unconfigure a GPIO pin based on bit-encoded description of the pin, set it
* into default HiZ state (and possibly mark it's unused) and unlock it whether
* it was previsouly selected as alternative function (GPIO_ALT|GPIO_CNF_AFPP|...).
*
* This is a safety function and prevents hardware from schocks, as unexpected
* write to the Timer Channel Output GPIO to fixed '1' or '0' while it should
* operate in PWM mode could produce excessive on-board currents and trigger
* over-current/alarm function.
*
* Returns:
* OK on success
* A negated errno value on invalid port
*
* To-Do: Auto Power Disable
****************************************************************************/
int stm32_unconfiggpio(uint32_t cfgset)
{
/* Reuse port and pin number and set it to default HiZ INPUT */
cfgset &= GPIO_PORT_MASK | GPIO_PIN_MASK;
#if defined(CONFIG_STM32_STM32F10XX)
cfgset |= GPIO_INPUT | GPIO_CNF_INFLOAT | GPIO_MODE_INPUT;
#elif defined(CONFIG_STM32_STM32F20XX) || defined(CONFIG_STM32_STM32F40XX)
cfgset |= GPIO_INPUT | GPIO_FLOAT;
#else
# error "Unsupported STM32 chip"
#endif
/* To-Do: Mark its unuse for automatic power saving options */
return stm32_configgpio(cfgset);
}
/****************************************************************************
* Name: stm32_gpiowrite
*
* Description:
* Write one or zero to the selected GPIO pin
*
****************************************************************************/
void stm32_gpiowrite(uint32_t pinset, bool value)
{
uint32_t base;
#if defined(CONFIG_STM32_STM32F10XX)
uint32_t offset;
#elif defined(CONFIG_STM32_STM32F20XX) || defined(CONFIG_STM32_STM32F40XX)
uint32_t bit;
#endif
unsigned int port;
unsigned int pin;
port = (pinset & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
if (port < STM32_NGPIO_PORTS)
{
/* Get the port base address */
base = g_gpiobase[port];
/* Get the pin number */
pin = (pinset & GPIO_PIN_MASK) >> GPIO_PIN_SHIFT;
/* Set or clear the output on the pin */
#if defined(CONFIG_STM32_STM32F10XX)
if (value)
{
offset = STM32_GPIO_BSRR_OFFSET;
}
else
{
offset = STM32_GPIO_BRR_OFFSET;
}
putreg32((1 << pin), base + offset);
#elif defined(CONFIG_STM32_STM32F20XX) || defined(CONFIG_STM32_STM32F40XX)
if (value)
{
bit = GPIO_BSRR_SET(pin);
}
else
{
bit = GPIO_BSRR_RESET(pin);
}
putreg32(bit, base + STM32_GPIO_BSRR_OFFSET);
#else
# error "Unsupported STM32 chip"
#endif
}
}
/****************************************************************************
* Name: stm32_gpioread
*
* Description:
* Read one or zero from the selected GPIO pin
*
****************************************************************************/
bool stm32_gpioread(uint32_t pinset)
{
uint32_t base;
unsigned int port;
unsigned int pin;
port = (pinset & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
if (port < STM32_NGPIO_PORTS)
{
/* Get the port base address */
base = g_gpiobase[port];
/* Get the pin number and return the input state of that pin */
pin = (pinset & GPIO_PIN_MASK) >> GPIO_PIN_SHIFT;
return ((getreg32(base + STM32_GPIO_IDR_OFFSET) & (1 << pin)) != 0);
}
return 0;
}
|