1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2337
2338
2339
2340
2341
2342
2343
2344
2345
2346
2347
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2376
2377
2378
2379
2380
2381
2382
2383
2384
2385
2386
2387
2388
2389
2390
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2424
2425
2426
2427
2428
2429
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
2470
2471
2472
2473
2474
2475
2476
2477
2478
2479
2480
2481
2482
2483
2484
2485
2486
2487
2488
2489
2490
2491
2492
2493
2494
2495
2496
2497
2498
2499
2500
2501
2502
2503
2504
2505
2506
2507
2508
2509
2510
2511
2512
2513
2514
2515
2516
2517
2518
2519
2520
2521
2522
2523
2524
2525
2526
2527
2528
2529
2530
2531
2532
2533
2534
2535
2536
2537
2538
2539
2540
2541
2542
2543
2544
2545
2546
2547
2548
2549
2550
2551
2552
2553
2554
2555
2556
2557
2558
2559
2560
2561
2562
2563
2564
2565
2566
2567
2568
2569
2570
2571
2572
2573
2574
2575
2576
2577
2578
2579
2580
2581
2582
2583
2584
2585
2586
2587
2588
2589
2590
2591
2592
2593
2594
2595
2596
2597
2598
2599
2600
2601
2602
2603
2604
2605
2606
2607
2608
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
2619
2620
2621
2622
2623
2624
2625
2626
2627
2628
2629
2630
2631
2632
2633
2634
2635
2636
2637
2638
2639
2640
2641
2642
2643
2644
2645
2646
2647
2648
2649
2650
2651
2652
2653
2654
2655
2656
2657
2658
2659
2660
2661
2662
2663
2664
2665
2666
2667
2668
2669
2670
2671
2672
2673
2674
2675
2676
2677
2678
2679
2680
2681
2682
2683
2684
2685
2686
2687
2688
2689
2690
2691
2692
2693
2694
2695
2696
2697
2698
2699
2700
2701
2702
2703
2704
2705
2706
2707
2708
2709
2710
2711
2712
2713
2714
2715
2716
2717
2718
2719
2720
2721
2722
2723
2724
2725
2726
2727
2728
2729
2730
2731
2732
2733
2734
2735
2736
2737
2738
2739
2740
2741
2742
2743
2744
2745
2746
2747
2748
2749
2750
2751
2752
2753
2754
2755
2756
2757
2758
2759
2760
2761
2762
2763
2764
2765
2766
2767
2768
2769
2770
2771
2772
2773
2774
2775
2776
2777
2778
2779
2780
2781
2782
2783
2784
2785
2786
2787
2788
2789
2790
2791
2792
2793
2794
2795
2796
2797
2798
2799
2800
2801
2802
2803
2804
2805
2806
2807
2808
2809
2810
2811
2812
2813
2814
2815
2816
2817
2818
2819
2820
2821
2822
2823
2824
2825
2826
2827
2828
2829
2830
2831
2832
2833
2834
2835
2836
2837
2838
2839
2840
2841
2842
2843
2844
2845
2846
2847
2848
2849
2850
2851
2852
2853
2854
2855
2856
2857
2858
2859
2860
2861
2862
2863
2864
2865
2866
2867
2868
2869
2870
2871
2872
2873
2874
2875
2876
2877
2878
2879
2880
2881
2882
2883
2884
2885
2886
2887
2888
2889
2890
2891
2892
2893
2894
2895
2896
2897
2898
2899
2900
2901
2902
2903
2904
2905
2906
2907
2908
2909
2910
2911
2912
2913
2914
2915
2916
2917
2918
2919
2920
2921
2922
2923
2924
2925
2926
2927
2928
2929
2930
2931
2932
2933
2934
2935
2936
2937
2938
2939
2940
2941
2942
2943
2944
2945
2946
2947
2948
2949
2950
2951
2952
2953
2954
2955
2956
2957
2958
2959
2960
2961
2962
2963
2964
2965
2966
2967
2968
2969
2970
2971
2972
2973
2974
2975
2976
2977
2978
2979
2980
2981
2982
2983
2984
2985
2986
2987
2988
2989
2990
2991
2992
2993
2994
2995
2996
2997
2998
2999
3000
3001
3002
3003
3004
3005
3006
3007
3008
3009
3010
3011
3012
3013
3014
3015
3016
3017
3018
3019
3020
3021
3022
3023
3024
3025
3026
3027
3028
3029
3030
3031
3032
3033
3034
3035
3036
3037
3038
3039
3040
3041
3042
3043
3044
3045
3046
3047
3048
3049
3050
3051
3052
3053
3054
3055
3056
3057
3058
3059
3060
3061
3062
3063
3064
3065
3066
3067
3068
3069
3070
3071
3072
3073
3074
3075
3076
3077
3078
3079
3080
3081
3082
3083
3084
3085
3086
3087
3088
3089
3090
3091
3092
3093
3094
3095
3096
3097
3098
3099
3100
3101
3102
3103
3104
3105
3106
3107
3108
3109
3110
3111
3112
3113
3114
3115
3116
3117
3118
3119
3120
3121
3122
3123
3124
3125
3126
3127
3128
3129
3130
3131
3132
3133
3134
3135
3136
3137
3138
3139
3140
3141
3142
3143
3144
3145
3146
3147
3148
3149
3150
3151
3152
3153
3154
3155
3156
3157
3158
3159
3160
3161
3162
3163
3164
3165
3166
3167
3168
3169
3170
3171
3172
3173
3174
3175
3176
3177
3178
3179
3180
3181
3182
3183
3184
3185
3186
3187
3188
3189
3190
3191
3192
3193
3194
3195
3196
3197
3198
3199
3200
3201
3202
3203
3204
3205
3206
3207
3208
3209
3210
3211
3212
3213
3214
3215
3216
3217
3218
3219
3220
3221
3222
3223
3224
3225
3226
3227
3228
3229
3230
3231
3232
3233
3234
3235
3236
3237
3238
3239
3240
3241
3242
3243
3244
3245
3246
3247
3248
3249
3250
3251
3252
3253
3254
3255
3256
3257
3258
3259
3260
3261
3262
3263
3264
3265
3266
3267
3268
3269
3270
3271
3272
3273
3274
3275
3276
3277
3278
3279
3280
3281
3282
3283
3284
3285
3286
3287
3288
3289
3290
3291
3292
3293
3294
3295
3296
3297
3298
3299
3300
3301
3302
3303
3304
3305
3306
3307
3308
3309
3310
3311
3312
3313
3314
3315
3316
3317
3318
3319
3320
3321
3322
3323
3324
3325
3326
3327
3328
3329
3330
3331
3332
3333
3334
3335
3336
3337
3338
3339
3340
3341
3342
3343
3344
3345
3346
3347
3348
3349
3350
3351
3352
3353
3354
3355
3356
3357
3358
3359
3360
3361
3362
3363
3364
3365
3366
3367
3368
3369
3370
3371
3372
3373
3374
3375
3376
3377
3378
3379
3380
3381
3382
3383
3384
3385
3386
3387
3388
3389
3390
3391
3392
3393
3394
3395
3396
3397
3398
3399
3400
3401
3402
3403
3404
3405
3406
3407
3408
3409
3410
3411
3412
3413
3414
3415
3416
3417
3418
3419
3420
3421
3422
3423
3424
3425
3426
3427
3428
3429
3430
3431
3432
3433
3434
3435
3436
3437
3438
3439
3440
3441
3442
3443
3444
3445
3446
3447
3448
3449
3450
3451
3452
3453
3454
3455
3456
3457
3458
3459
3460
3461
3462
3463
3464
3465
3466
3467
3468
3469
3470
3471
3472
3473
3474
3475
3476
3477
3478
3479
3480
3481
3482
3483
3484
3485
3486
3487
3488
3489
3490
3491
3492
3493
3494
3495
3496
3497
3498
3499
3500
3501
3502
3503
3504
3505
3506
3507
3508
3509
3510
3511
3512
3513
3514
3515
3516
3517
3518
3519
3520
3521
3522
3523
3524
3525
3526
3527
3528
3529
3530
3531
3532
3533
3534
3535
3536
3537
3538
3539
3540
3541
3542
3543
3544
3545
3546
3547
3548
3549
3550
3551
3552
3553
3554
3555
3556
3557
3558
3559
3560
3561
3562
3563
3564
3565
3566
3567
3568
3569
3570
3571
3572
3573
3574
3575
3576
3577
3578
3579
3580
|
/****************************************************************************
* arch/arm/src/stm32/stm32_usbdev.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* References:
* - RM0008 Reference manual, STMicro document ID 13902
* - STM32F10xxx USB development kit, UM0424, STMicro
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/arch.h>
#include <nuttx/usb.h>
#include <nuttx/usbdev.h>
#include <nuttx/usbdev_trace.h>
#include <arch/irq.h>
#include "up_arch.h"
#include "stm32_internal.h"
#include "stm32_usbdev.h"
#if defined(CONFIG_USBDEV) && defined(CONFIG_STM32_USB)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#ifndef CONFIG_USBDEV_EP0_MAXSIZE
# define CONFIG_USBDEV_EP0_MAXSIZE 64
#endif
#ifndef CONFIG_USBDEV_MAXPOWER
# define CONFIG_USBDEV_MAXPOWER 100 /* mA */
#endif
#define USB_SLOW_INT USBDEV_DEVINT_EPSLOW
#define USB_DEVSTATUS_INT USBDEV_DEVINT_DEVSTAT
#ifdef CONFIG_STM32_USBDEV_EPFAST_INTERRUPT
# define USB_FAST_INT USBDEV_DEVINT_EPFAST
#else
# define USB_FAST_INT 0
#endif
#ifndef CONFIG_USB_PRI
# define CONFIG_USB_PRI NVIC_SYSH_PRIORITY_DEFAULT
#endif
/* Extremely detailed register debug that you would normally never want
* enabled.
*/
#ifndef CONFIG_DEBUG
# undef CONFIG_STM32_USBDEV_REGDEBUG
#endif
/* Initial interrupt mask: Reset + Suspend + Correct Transfer */
#define STM32_CNTR_SETUP (USB_CNTR_RESETM|USB_CNTR_SUSPM|USB_CNTR_CTRM)
/* Endpoint identifiers. The STM32 supports up to 16 mono-directional or 8
* bidirectional endpoints. However, when you take into account PMA buffer
* usage (see below) and the fact that EP0 is bidirectional, then there is
* a functional limitation of EP0 + 5 mono-directional endpoints = 6. We'll
* define STM32_NENDPOINTS to be 8, however, because that is how many
* endpoint register sets there are.
*/
#define STM32_NENDPOINTS (8)
#define EP0 (0)
#define EP1 (1)
#define EP2 (2)
#define EP3 (3)
#define EP4 (4)
#define EP5 (5)
#define EP6 (6)
#define EP7 (7)
#define STM32_ENDP_BIT(ep) (1 << (ep))
#define STM32_ENDP_ALLSET 0xff
/* Packet sizes. We us a fixed 64 max packet size for all endpoint types */
#define STM32_MAXPACKET_SHIFT (6)
#define STM32_MAXPACKET_SIZE (1 << (STM32_MAXPACKET_SHIFT))
#define STM32_MAXPACKET_MASK (STM32_MAXPACKET_SIZE-1)
#define STM32_EP0MAXPACKET STM32_MAXPACKET_SIZE
/* Buffer descriptor table. We assume that USB has exclusive use of CAN/USB
* memory. The buffer table is positioned at the beginning of the 512-byte
* CAN/USB memory. We will use the first STM32_NENDPOINTS*4 words for the buffer
* table. That is exactly 64 bytes, leaving 7*64 bytes for endpoint buffers.
*/
#define STM32_BTABLE_ADDRESS (0x00) /* Start at the beginning of USB/CAN RAM */
#define STM32_DESC_SIZE (8) /* Each descriptor is 4*2=8 bytes in size */
#define STM32_BTABLE_SIZE (STM32_NENDPOINTS*STM32_DESC_SIZE)
/* Buffer layout. Assume that all buffers are 64-bytes (maxpacketsize), then
* we have space for only 7 buffers; endpoint 0 will require two buffers, leaving
* 5 for other endpoints.
*/
#define STM32_BUFFER_START STM32_BTABLE_SIZE
#define STM32_EP0_RXADDR STM32_BUFFER_START
#define STM32_EP0_TXADDR (STM32_EP0_RXADDR+STM32_EP0MAXPACKET)
#warning "Doesn't the buffer size need to include 2 bytes for the CRC?"
#define STM32_BUFFER_EP0 0x03
#define STM32_NBUFFERS 7
#define STM32_BUFFER_BIT(bn) (1 << (bn))
#define STM32_BUFFER_ALLSET 0x7f
#define STM32_BUFNO2BUF(bn) (STM32_BUFFER_START+((bn)<<STM32_MAXPACKET_SHIFT))
/* USB-related masks */
#define REQRECIPIENT_MASK (USB_REQ_TYPE_MASK | USB_REQ_RECIPIENT_MASK)
/* Endpoint rister masks (handling toggle fields) */
#define EPR_NOTOG_MASK (USB_EPR_CTR_RX | USB_EPR_SETUP | USB_EPR_EPTYPE_MASK |\
USB_EPR_EP_KIND | USB_EPR_CTR_TX | USB_EPR_EA_MASK)
#define EPR_TXDTOG_MASK (USB_EPR_STATTX_MASK | EPR_NOTOG_MASK)
#define EPR_RXDTOG_MASK (USB_EPR_STATRX_MASK | EPR_NOTOG_MASK)
/* Request queue operations *************************************************/
#define stm32_rqempty(ep) ((ep)->head == NULL)
#define stm32_rqpeek(ep) ((ep)->head)
/* USB trace ****************************************************************/
/* Trace error codes */
#define STM32_TRACEERR_ALLOCFAIL 0x0001
#define STM32_TRACEERR_BADCLEARFEATURE 0x0002
#define STM32_TRACEERR_BADDEVGETSTATUS 0x0003
#define STM32_TRACEERR_BADEPGETSTATUS 0x0004
#define STM32_TRACEERR_BADEPNO 0x0005
#define STM32_TRACEERR_BADEPTYPE 0x0006
#define STM32_TRACEERR_BADGETCONFIG 0x0007
#define STM32_TRACEERR_BADGETSETDESC 0x0008
#define STM32_TRACEERR_BADGETSTATUS 0x0009
#define STM32_TRACEERR_BADSETADDRESS 0x000a
#define STM32_TRACEERR_BADSETCONFIG 0x000b
#define STM32_TRACEERR_BADSETFEATURE 0x000c
#define STM32_TRACEERR_BINDFAILED 0x000d
#define STM32_TRACEERR_DISPATCHSTALL 0x000e
#define STM32_TRACEERR_DRIVER 0x000f
#define STM32_TRACEERR_DRIVERREGISTERED 0x0010
#define STM32_TRACEERR_EP0BADCTR 0x0011
#define STM32_TRACEERR_EP0SETUPSTALLED 0x0012
#define STM32_TRACEERR_EPBUFFER 0x0013
#define STM32_TRACEERR_EPDISABLED 0x0014
#define STM32_TRACEERR_EPOUTNULLPACKET 0x0015
#define STM32_TRACEERR_EPRESERVE 0x0016
#define STM32_TRACEERR_INVALIDCTRLREQ 0x0017
#define STM32_TRACEERR_INVALIDPARMS 0x0018
#define STM32_TRACEERR_IRQREGISTRATION 0x0019
#define STM32_TRACEERR_NOTCONFIGURED 0x001a
#define STM32_TRACEERR_REQABORTED 0x001b
/* Trace interrupt codes */
#define STM32_TRACEINTID_CLEARFEATURE 0x0001
#define STM32_TRACEINTID_DEVGETSTATUS 0x0002
#define STM32_TRACEINTID_DISPATCH 0x0003
#define STM32_TRACEINTID_EP0IN 0x0004
#define STM32_TRACEINTID_EP0INDONE 0x0005
#define STM32_TRACEINTID_EP0OUTDONE 0x0006
#define STM32_TRACEINTID_EP0SETUPDONE 0x0007
#define STM32_TRACEINTID_EP0SETUPSETADDRESS 0x0008
#define STM32_TRACEINTID_EPGETSTATUS 0x0009
#define STM32_TRACEINTID_EPINDONE 0x000a
#define STM32_TRACEINTID_EPINQEMPTY 0x000b
#define STM32_TRACEINTID_EPOUTDONE 0x000c
#define STM32_TRACEINTID_EPOUTPENDING 0x000d
#define STM32_TRACEINTID_EPOUTQEMPTY 0x000e
#define STM32_TRACEINTID_ESOF 0x000f
#define STM32_TRACEINTID_GETCONFIG 0x0010
#define STM32_TRACEINTID_GETSETDESC 0x0011
#define STM32_TRACEINTID_GETSETIF 0x0012
#define STM32_TRACEINTID_GETSTATUS 0x0013
#define STM32_TRACEINTID_HPINTERRUPT 0x0014
#define STM32_TRACEINTID_IFGETSTATUS 0x0015
#define STM32_TRACEINTID_LPCTR 0x0016
#define STM32_TRACEINTID_LPINTERRUPT 0x0017
#define STM32_TRACEINTID_NOSTDREQ 0x0018
#define STM32_TRACEINTID_RESET 0x0019
#define STM32_TRACEINTID_SETCONFIG 0x001a
#define STM32_TRACEINTID_SETFEATURE 0x001b
#define STM32_TRACEINTID_SUSP 0x001c
#define STM32_TRACEINTID_SYNCHFRAME 0x001d
#define STM32_TRACEINTID_WKUP 0x001e
/* Ever-present MIN and MAX macros */
#ifndef MIN
# define MIN(a,b) (a < b ? a : b)
#endif
#ifndef MAX
# define MAX(a,b) (a > b ? a : b)
#endif
/* Byte ordering in host-based values */
#ifdef CONFIG_ENDIAN_BIG
# define LSB 1
# define MSB 0
#else
# define LSB 0
# define MSB 1
#endif
/****************************************************************************
* Private Type Definitions
****************************************************************************/
/* The various states of a control pipe */
enum stm32_devstate_e
{
DEVSTATE_IDLE = 0, /* No request in progress */
DEVSTATE_RDREQUEST, /* Read request in progress */
DEVSTATE_WRREQUEST, /* Write request in progress */
DEVSTATE_STALLED /* We are stalled */
};
/* Resume states */
enum stm32_rsmstate_e
{
RSMSTATE_IDLE = 0, /* Device is either fully suspended or running */
RSMSTATE_STARTED, /* Resume sequence has been started */
RSMSTATE_WAITING /* Waiting (on ESOFs) for end of sequence */
};
union wb_u
{
uint16 w;
ubyte b[2];
};
/* A container for a request so that the request make be retained in a list */
struct stm32_req_s
{
struct usbdev_req_s req; /* Standard USB request */
struct stm32_req_s *flink; /* Supports a singly linked list */
};
/* This is the internal representation of an endpoint */
struct stm32_ep_s
{
/* Common endpoint fields. This must be the first thing defined in the
* structure so that it is possible to simply cast from struct usbdev_ep_s
* to struct stm32_ep_s.
*/
struct usbdev_ep_s ep; /* Standard endpoint structure */
/* STR71X-specific fields */
struct stm32_usbdev_s *dev; /* Reference to private driver data */
struct stm32_req_s *head; /* Request list for this endpoint */
struct stm32_req_s *tail;
ubyte bufno; /* Allocated buffer number */
ubyte stalled:1; /* TRUE: Endpoint is stalled */
ubyte halted:1; /* TRUE: Endpoint feature halted */
ubyte txbusy:1; /* TRUE: TX endpoint FIFO full */
ubyte txnullpkt:1; /* Null packet needed at end of transfer */
};
struct stm32_usbdev_s
{
/* Common device fields. This must be the first thing defined in the
* structure so that it is possible to simply cast from struct usbdev_s
* to structstm32_usbdev_s.
*/
struct usbdev_s usbdev;
/* The bound device class driver */
struct usbdevclass_driver_s *driver;
/* STM32-specific fields */
struct usb_ctrlreq_s ctrl; /* Last EP0 request */
ubyte devstate; /* Driver state (see enum stm32_devstate_e) */
ubyte rsmstate; /* Resume state (see enum stm32_rsmstate_e) */
ubyte nesofs; /* ESOF counter (for resume support) */
ubyte rxpending:1; /* 1: OUT data in PMA, but no read requests */
ubyte selfpowered:1; /* 1: Device is self powered */
ubyte epavail; /* Bitset of available endpoints */
ubyte bufavail; /* Bitset of available buffers */
uint16 rxstatus; /* Saved during interrupt processing */
uint16 txstatus; /* " " " " " " " " */
uint16 imask; /* Current interrupt mask */
/* The endpoint list */
struct stm32_ep_s eplist[STM32_NENDPOINTS];
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* Register operations ******************************************************/
#if defined(CONFIG_STM32_USBDEV_REGDEBUG) && defined(CONFIG_DEBUG)
static uint16 stm32_getreg(uint32 addr);
static void stm32_putreg(uint16 val, uint32 addr);
static void stm32_checksetup(void);
static void stm32_dumpep(int epno);
#else
# define stm32_getreg(addr) getreg16(addr)
# define stm32_putreg(val,addr) putreg16(val,addr)
# define stm32_checksetup()
# define stm32_dumpep(epno)
#endif
/* Low-Level Helpers ********************************************************/
static inline void
stm32_seteptxcount(ubyte epno, uint16 count);
static inline void
stm32_seteptxaddr(ubyte epno, uint16 addr);
static inline uint16
stm32_geteptxaddr(ubyte epno);
static void stm32_seteprxcount(ubyte epno, uint16 count);
static inline uint16
stm32_geteprxcount(ubyte epno);
static inline void
stm32_seteprxaddr(ubyte epno, uint16 addr);
static inline uint16
stm32_geteprxaddr(ubyte epno);
static inline void
stm32_setepaddress(ubyte epno, uint16 addr);
static inline void
stm32_seteptype(ubyte epno, uint16 type);
static inline void
stm32_seteptxaddr(ubyte epno, uint16 addr);
static inline void
stm32_setstatusout(ubyte epno);
static inline void
stm32_clrstatusout(ubyte epno);
static void stm32_clrrxdtog(ubyte epno);
static void stm32_clrtxdtog(ubyte epno);
static void stm32_clrepctrrx(ubyte epno);
static void stm32_clrepctrtx(ubyte epno);
static void stm32_seteptxstatus(ubyte epno, uint16 state);
static void stm32_seteprxstatus(ubyte epno, uint16 state);
static inline uint16
stm32_geteptxstatus(ubyte epno);
static inline uint16
stm32_geteprxstatus(ubyte epno);
static uint16 stm32_eptxstalled(ubyte epno);
static uint16 stm32_eprxstalled(ubyte epno);
static void stm32_setimask(struct stm32_usbdev_s *priv, uint16 setbits,
uint16 clrbits);
/* Suspend/Resume Helpers ***************************************************/
static void stm32_suspend(struct stm32_usbdev_s *priv);
static void stm32_initresume(struct stm32_usbdev_s *priv);
static void stm32_esofpoll(struct stm32_usbdev_s *priv) ;
/* Request Helpers **********************************************************/
static void stm32_copytopma(const ubyte *buffer, uint16 pma,
uint16 nbytes);
static inline void
stm32_copyfrompma(ubyte *buffer, uint16 pma, uint16 nbytes);
static struct stm32_req_s *
stm32_rqdequeue(struct stm32_ep_s *privep);
static void stm32_rqenqueue(struct stm32_ep_s *privep,
struct stm32_req_s *req);
static inline void
stm32_abortrequest(struct stm32_ep_s *privep,
struct stm32_req_s *privreq, sint16 result);
static void stm32_reqcomplete(struct stm32_ep_s *privep, sint16 result);
static void stm32_epwrite(struct stm32_usbdev_s *buf,
struct stm32_ep_s *privep, const ubyte *data, uint32 nbytes);
static int stm32_wrrequest(struct stm32_usbdev_s *priv,
struct stm32_ep_s *privep);
static int stm32_rdrequest(struct stm32_usbdev_s *priv,
struct stm32_ep_s *privep);
/* Interrupt level processing ***********************************************/
static void stm32_dispatchrequest(struct stm32_usbdev_s *priv);
static void stm32_epdone(struct stm32_usbdev_s *priv, ubyte epno);
static void stm32_setdevaddr(struct stm32_usbdev_s *priv, ubyte value);
static void stm32_ep0setup(struct stm32_usbdev_s *priv);
static void stm32_ep0out(struct stm32_usbdev_s *priv);
static void stm32_ep0in(struct stm32_usbdev_s *priv);
static inline void
stm32_ep0done(struct stm32_usbdev_s *priv, uint16 istr);
static void stm32_lptransfer(struct stm32_usbdev_s *priv);
static int stm32_hpinterrupt(int irq, void *context);
static int stm32_lpinterrupt(int irq, void *context);
/* Endpoint helpers *********************************************************/
static inline struct stm32_ep_s *
stm32_epreserve(struct stm32_usbdev_s *priv, ubyte epset);
static inline void
stm32_epunreserve(struct stm32_usbdev_s *priv,
struct stm32_ep_s *privep);
static inline boolean
stm32_epreserved(struct stm32_usbdev_s *priv, int epno);
static int stm32_epallocpma(struct stm32_usbdev_s *priv);
static inline void
stm32_epfreepma(struct stm32_usbdev_s *priv,
struct stm32_ep_s *privep);
/* Endpoint operations ******************************************************/
static int stm32_epconfigure(struct usbdev_ep_s *ep,
const struct usb_epdesc_s *desc, boolean last);
static int stm32_epdisable(struct usbdev_ep_s *ep);
static struct usbdev_req_s *
stm32_epallocreq(struct usbdev_ep_s *ep);
static void stm32_epfreereq(struct usbdev_ep_s *ep,
struct usbdev_req_s *);
static int stm32_epsubmit(struct usbdev_ep_s *ep,
struct usbdev_req_s *req);
static int stm32_epcancel(struct usbdev_ep_s *ep,
struct usbdev_req_s *req);
static int stm32_epstall(struct usbdev_ep_s *ep, boolean resume);
/* USB device controller operations *****************************************/
static struct usbdev_ep_s *
stm32_allocep(struct usbdev_s *dev, ubyte epno, boolean in,
ubyte eptype);
static void stm32_freeep(struct usbdev_s *dev, struct usbdev_ep_s *ep);
static int stm32_getframe(struct usbdev_s *dev);
static int stm32_wakeup(struct usbdev_s *dev);
static int stm32_selfpowered(struct usbdev_s *dev, boolean selfpowered);
/* Initialization/Reset *****************************************************/
static void stm32_reset(struct stm32_usbdev_s *priv);
static void stm32_hwreset(struct stm32_usbdev_s *priv);
/****************************************************************************
* Private Data
****************************************************************************/
/* Since there is only a single USB interface, all status information can be
* be simply retained in a single global instance.
*/
static struct stm32_usbdev_s g_usbdev;
static const struct usbdev_epops_s g_epops =
{
.configure = stm32_epconfigure,
.disable = stm32_epdisable,
.allocreq = stm32_epallocreq,
.freereq = stm32_epfreereq,
.submit = stm32_epsubmit,
.cancel = stm32_epcancel,
.stall = stm32_epstall,
};
static const struct usbdev_ops_s g_devops =
{
.allocep = stm32_allocep,
.freeep = stm32_freeep,
.getframe = stm32_getframe,
.wakeup = stm32_wakeup,
.selfpowered = stm32_selfpowered,
.pullup = stm32_usbpullup,
};
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Private Private Functions
****************************************************************************/
/****************************************************************************
* Register Operations
****************************************************************************/
/****************************************************************************
* Name: stm32_getreg
****************************************************************************/
#if defined(CONFIG_STM32_USBDEV_REGDEBUG) && defined(CONFIG_DEBUG)
static uint16 stm32_getreg(uint32 addr)
{
static uint32 prevaddr = 0;
static uint16 preval = 0;
static uint32 count = 0;
/* Read the value from the register */
uint16 val = getreg16(addr);
/* Is this the same value that we read from the same register last time?
* Are we polling the register? If so, suppress some of the output.
*/
if (addr == prevaddr && val == preval)
{
if (count == 0xffffffff || ++count > 3)
{
if (count == 4)
{
lldbg("...\n");
}
return val;
}
}
/* No this is a new address or value */
else
{
/* Did we print "..." for the previous value? */
if (count > 3)
{
/* Yes.. then show how many times the value repeated */
lldbg("[repeats %d more times]\n", count-3);
}
/* Save the new address, value, and count */
prevaddr = addr;
preval = val;
count = 1;
}
/* Show the register value read */
lldbg("%08x->%04x\n", addr, val);
return val;
}
#endif
/****************************************************************************
* Name: stm32_putreg
****************************************************************************/
#if defined(CONFIG_STM32_USBDEV_REGDEBUG) && defined(CONFIG_DEBUG)
static void stm32_putreg(uint16 val, uint32 addr)
{
/* Show the register value being written */
lldbg("%08x<-%04x\n", addr, val);
/* Write the value */
putreg32(val, addr);
}
#endif
/****************************************************************************
* Name: stm32_dumpep
****************************************************************************/
#if defined(CONFIG_STM32_USBDEV_REGDEBUG) && defined(CONFIG_DEBUG)
static void stm32_dumpep(int epno)
{
uint32 addr;
/* Common registers */
lldbg("CNTR: %04x\n", getreg16(STM32_USB_CNTR));
lldbg("ISTR: %04x\n", getreg16(STM32_USB_ISTR));
lldbg("FNR: %04x\n", getreg16(STM32_USB_FNR));
lldbg("DADDR: %04x\n", getreg16(STM32_USB_DADDR));
lldbg("BTABLE: %04x\n", getreg16(STM32_USB_BTABLE));
/* Endpoint register */
addr = STM32_USB_EPR(epno);
lldbg("EPR%d: [%08x] %04x\n", epno, addr, getreg16(addr));
/* Endpoint descriptor */
addr = STM32_USB_BTABLE_ADDR(epno, 0);
lldbg("DESC: %08x\n", addr);
/* Endpoint buffer descriptor */
addr = STM32_USB_ADDR_TX(epno);
lldbg(" TX ADDR: [%08x] %04x\n", addr, getreg16(addr));
addr = STM32_USB_COUNT_TX(epno);
lldbg(" COUNT: [%08x] %04x\n", addr, getreg16(addr));
addr = STM32_USB_ADDR_RX(epno);
lldbg(" RX ADDR: [%08x] %04x\n", addr, getreg16(addr));
addr = STM32_USB_COUNT_RX(epno);
lldbg(" COUNT: [%08x] %04x\n", addr, getreg16(addr));
}
#endif
/****************************************************************************
* Name: stm32_checksetup
****************************************************************************/
#if defined(CONFIG_STM32_USBDEV_REGDEBUG) && defined(CONFIG_DEBUG)
static void stm32_checksetup(void)
{
uint32 cfgr = getreg32(STM32_RCC_CFGR);
uint32 apb1rstr = getreg32(STM32_RCC_APB1RSTR);
uint32 apb1enr = getreg32(STM32_RCC_APB1ENR);
lldbg("CFGR: %08x APB1RSTR: %08x APB1ENR: %08x\n", cfgr, apb1rstr, apb1enr);
if ((apb1rstr & RCC_APB1RSTR_USBRST) != 0 ||
(apb1enr & RCC_APB1ENR_USBEN) == 0)
{
lldbg("ERROR: USB is NOT setup correctly\n");
}
}
#endif
/****************************************************************************
* Low-Level Helpers
****************************************************************************/
/****************************************************************************
* Name: stm32_seteptxcount
****************************************************************************/
static inline void stm32_seteptxcount(ubyte epno, uint16 count)
{
volatile uint32 *epaddr = (uint32*)STM32_USB_COUNT_TX(epno);
*epaddr = count;
}
/****************************************************************************
* Name: stm32_seteptxaddr
****************************************************************************/
static inline void stm32_seteptxaddr(ubyte epno, uint16 addr)
{
volatile uint32 *txaddr = (uint32*)STM32_USB_ADDR_TX(epno);
*txaddr = addr;
}
/****************************************************************************
* Name: stm32_geteptxaddr
****************************************************************************/
static inline uint16 stm32_geteptxaddr(ubyte epno)
{
volatile uint32 *txaddr = (uint32*)STM32_USB_ADDR_TX(epno);
return (uint16)*txaddr;
}
/****************************************************************************
* Name: stm32_seteprxcount
****************************************************************************/
static void stm32_seteprxcount(ubyte epno, uint16 count)
{
volatile uint32 *epaddr = (uint32*)STM32_USB_COUNT_RX(epno);
uint16 nblocks;
/* The upper bits of the RX COUNT value contain the size of allocated
* RX buffer. This is based on a block size of 2 or 32:
*
* USB_COUNT_RX_BL_SIZE not set:
* nblocks is in units of 2 bytes.
* 00000 - not allowed
* 00001 - 2 bytes
* ....
* 11111 - 62 bytes
*
* USB_COUNT_RX_BL_SIZE set:
* 00000 - 32 bytes
* 00001 - 64 bytes
* ...
* 01111 - 512 bytes
* 1xxxx - Not allowed
*/
if (count > 62)
{
/* Blocks of 32 (with 0 meaning one block of 32) */
nblocks = (count >> 5) - 1 ;
DEBUGASSERT(nblocks <= 0x0f);
*epaddr = (uint32)((nblocks << USB_COUNT_RX_NUM_BLOCK_SHIFT) | USB_COUNT_RX_BL_SIZE);
}
else
{
/* Blocks of 2 (with 1 meaning one block of 2) */
nblocks = (count + 1) >> 1;
DEBUGASSERT(nblocks > 0 && nblocks < 0x1f);
*epaddr = (uint32)(nblocks << USB_COUNT_RX_NUM_BLOCK_SHIFT);
}
}
/****************************************************************************
* Name: stm32_geteprxcount
****************************************************************************/
static inline uint16 stm32_geteprxcount(ubyte epno)
{
volatile uint32 *epaddr = (uint32*)STM32_USB_COUNT_RX(epno);
return (*epaddr) & USB_COUNT_RX_MASK;
}
/****************************************************************************
* Name: stm32_seteprxaddr
****************************************************************************/
static inline void stm32_seteprxaddr(ubyte epno, uint16 addr)
{
volatile uint32 *rxaddr = (uint32*)STM32_USB_ADDR_RX(epno);
*rxaddr = addr;
}
/****************************************************************************
* Name: stm32_seteprxaddr
****************************************************************************/
static inline uint16 stm32_geteprxaddr(ubyte epno)
{
volatile uint32 *rxaddr = (uint32*)STM32_USB_ADDR_RX(epno);
return (uint16)*rxaddr;
}
/****************************************************************************
* Name: stm32_setepaddress
****************************************************************************/
static inline void stm32_setepaddress(ubyte epno, uint16 addr)
{
uint32 epaddr = STM32_USB_EPR(epno);
uint16 regval;
regval = stm32_getreg(epaddr);
regval &= EPR_NOTOG_MASK;
regval &= ~USB_EPR_EA_MASK;
regval |= (addr << USB_EPR_EA_SHIFT);
stm32_putreg(regval, epaddr);
}
/****************************************************************************
* Name: stm32_seteptype
****************************************************************************/
static inline void stm32_seteptype(ubyte epno, uint16 type)
{
uint32 epaddr = STM32_USB_EPR(epno);
uint16 regval;
regval = stm32_getreg(epaddr);
regval &= EPR_NOTOG_MASK;
regval &= ~USB_EPR_EPTYPE_MASK;
regval |= type;
stm32_putreg(regval, epaddr);
}
/****************************************************************************
* Name: stm32_setstatusout
****************************************************************************/
static inline void stm32_setstatusout(ubyte epno)
{
uint32 epaddr = STM32_USB_EPR(epno);
uint16 regval;
/* For a BULK endpoint the EP_KIND bit is used to enabled double buffering;
* for a CONTROL endpoint, it is set to indicate that a status OUT
* transaction is expected. The bit is not used with out endpoint types.
*/
regval = stm32_getreg(epaddr);
regval &= EPR_NOTOG_MASK;
regval |= USB_EPR_EP_KIND;
stm32_putreg(regval, epaddr);
}
/****************************************************************************
* Name: stm32_clrstatusout
****************************************************************************/
static inline void stm32_clrstatusout(ubyte epno)
{
uint32 epaddr = STM32_USB_EPR(epno);
uint16 regval;
/* For a BULK endpoint the EP_KIND bit is used to enabled double buffering;
* for a CONTROL endpoint, it is set to indicate that a status OUT
* transaction is expected. The bit is not used with out endpoint types.
*/
regval = stm32_getreg(epaddr);
regval &= EPR_NOTOG_MASK;
regval &= ~USB_EPR_EP_KIND;
stm32_putreg(regval, epaddr);
}
/****************************************************************************
* Name: stm32_clrrxdtog
****************************************************************************/
static void stm32_clrrxdtog(ubyte epno)
{
uint32 epaddr = STM32_USB_EPR(epno);
uint16 regval;
regval = stm32_getreg(epaddr);
if ((regval & USB_EPR_DTOG_RX) != 0)
{
regval &= EPR_NOTOG_MASK;
regval |= USB_EPR_DTOG_RX;
stm32_putreg(regval, epaddr);
}
}
/****************************************************************************
* Name: stm32_clrtxdtog
****************************************************************************/
static void stm32_clrtxdtog(ubyte epno)
{
uint32 epaddr = STM32_USB_EPR(epno);
uint16 regval;
regval = stm32_getreg(epaddr);
if ((regval & USB_EPR_DTOG_TX) != 0)
{
regval &= EPR_NOTOG_MASK;
regval |= USB_EPR_DTOG_TX;
stm32_putreg(regval, epaddr);
}
}
/****************************************************************************
* Name: stm32_clrepctrrx
****************************************************************************/
static void stm32_clrepctrrx(ubyte epno)
{
uint32 epaddr = STM32_USB_EPR(epno);
uint16 regval;
regval = stm32_getreg(epaddr);
regval &= EPR_NOTOG_MASK;
regval &= ~USB_EPR_CTR_RX;
stm32_putreg(regval, epaddr);
}
/****************************************************************************
* Name: stm32_clrepctrtx
****************************************************************************/
static void stm32_clrepctrtx(ubyte epno)
{
uint32 epaddr = STM32_USB_EPR(epno);
uint16 regval;
regval = stm32_getreg(epaddr);
regval &= EPR_NOTOG_MASK;
regval &= ~USB_EPR_CTR_TX;
stm32_putreg(regval, epaddr);
}
/****************************************************************************
* Name: stm32_geteptxstatus
****************************************************************************/
static inline uint16 stm32_geteptxstatus(ubyte epno)
{
return (uint16)(stm32_getreg(STM32_USB_EPR(epno)) & USB_EPR_STATTX_MASK);
}
/****************************************************************************
* Name: stm32_geteprxstatus
****************************************************************************/
static inline uint16 stm32_geteprxstatus(ubyte epno)
{
return (stm32_getreg(STM32_USB_EPR(epno)) & USB_EPR_STATRX_MASK);
}
/****************************************************************************
* Name: stm32_seteptxstatus
****************************************************************************/
static void stm32_seteptxstatus(ubyte epno, uint16 state)
{
uint32 epaddr = STM32_USB_EPR(epno);
uint16 regval;
regval = stm32_getreg(epaddr) & EPR_TXDTOG_MASK;
/* Toggle first bit */
if ((USB_EPR_STATTX_DTOG1 & state) != 0)
{
regval ^= USB_EPR_STATTX_DTOG1;
}
/* Toggle second bit */
if ((USB_EPR_STATTX_DTOG2 & state) != 0)
{
regval ^= USB_EPR_STATTX_DTOG2;
}
stm32_putreg(regval, epaddr);
}
/****************************************************************************
* Name: stm32_seteprxstatus
****************************************************************************/
static void stm32_seteprxstatus(ubyte epno, uint16 state)
{
uint32 epaddr = STM32_USB_EPR(epno);
uint16 regval;
regval = stm32_getreg(epaddr) & EPR_RXDTOG_MASK;
/* Toggle first bit */
if ((USB_EPR_STATRX_DTOG1 & state) != 0)
{
regval ^= USB_EPR_STATRX_DTOG1;
}
/* Toggle second bit */
if ((USB_EPR_STATRX_DTOG2 & state) != 0)
{
regval ^= USB_EPR_STATRX_DTOG2;
}
stm32_putreg(regval, epaddr);
}
/****************************************************************************
* Name: stm32_eptxstalled
****************************************************************************/
static inline uint16 stm32_eptxstalled(ubyte epno)
{
return (stm32_geteptxstatus(epno) == USB_EPR_STATTX_STALL);
}
/****************************************************************************
* Name: stm32_eprxstalled
****************************************************************************/
static inline uint16 stm32_eprxstalled(ubyte epno)
{
return (stm32_geteprxstatus(epno) == USB_EPR_STATRX_STALL);
}
/****************************************************************************
* Request Helpers
****************************************************************************/
/****************************************************************************
* Name: stm32_copytopma
****************************************************************************/
static void stm32_copytopma(const ubyte *buffer, uint16 pma, uint16 nbytes)
{
uint16 *dest;
uint16 ms;
uint16 ls;
int nwords = (nbytes + 1) >> 1;
int i;
/* Copy loop. Source=user buffer, Dest=packet memory */
dest = (uint16*)(STM32_USBCANRAM_BASE + ((uint32)pma << 1));
for (i = nwords; i != 0; i--)
{
/* Read two bytes and pack into on 16-bit word */
ls = (uint16)(*buffer++);
ms = (uint16)(*buffer++);
*dest = ms << 8 | ls;
/* Source address increments by 2*sizeof(ubyte) = 2; Dest address
* increments by 2*sizeof(uint16) = 4.
*/
dest += 2;
}
}
/****************************************************************************
* Name: stm32_copyfrompma
****************************************************************************/
static inline void
stm32_copyfrompma(ubyte *buffer, uint16 pma, uint16 nbytes)
{
uint32 *src;
int nwords = (nbytes + 1) >> 1;
int i;
/* Copy loop. Source=packet memory, Dest=user buffer */
src = (uint32*)(STM32_USBCANRAM_BASE + ((uint32)pma << 1));
for (i = nwords; i != 0; i--)
{
/* Copy 16-bits from packet memory to user buffer. */
*(uint16*)buffer = *src++;
/* Source address increments by 1*sizeof(uint32) = 4; Dest address
* increments by 2*sizeof(ubyte) = 2.
*/
buffer += 2;
}
}
/****************************************************************************
* Name: stm32_rqdequeue
****************************************************************************/
static struct stm32_req_s *stm32_rqdequeue(struct stm32_ep_s *privep)
{
struct stm32_req_s *ret = privep->head;
if (ret)
{
privep->head = ret->flink;
if (!privep->head)
{
privep->tail = NULL;
}
ret->flink = NULL;
}
return ret;
}
/****************************************************************************
* Name: stm32_rqenqueue
****************************************************************************/
static void stm32_rqenqueue(struct stm32_ep_s *privep,
struct stm32_req_s *req)
{
req->flink = NULL;
if (!privep->head)
{
privep->head = req;
privep->tail = req;
}
else
{
privep->tail->flink = req;
privep->tail = req;
}
}
/****************************************************************************
* Name: stm32_abortrequest
****************************************************************************/
static inline void
stm32_abortrequest(struct stm32_ep_s *privep, struct stm32_req_s *privreq, sint16 result)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_REQABORTED), (uint16)USB_EPNO(privep->ep.eplog));
/* Save the result in the request structure */
privreq->req.result = result;
/* Callback to the request completion handler */
privreq->req.callback(&privep->ep, &privreq->req);
}
/****************************************************************************
* Name: stm32_reqcomplete
****************************************************************************/
static void stm32_reqcomplete(struct stm32_ep_s *privep, sint16 result)
{
struct stm32_req_s *privreq;
irqstate_t flags;
/* Remove the completed request at the head of the endpoint request list */
flags = irqsave();
privreq = stm32_rqdequeue(privep);
irqrestore(flags);
if (privreq)
{
/* If endpoint 0, temporarily reflect the state of protocol stalled
* in the callback.
*/
boolean stalled = privep->stalled;
if (USB_EPNO(privep->ep.eplog) == EP0)
{
privep->stalled = (privep->dev->devstate == DEVSTATE_STALLED);
}
/* Save the result in the request structure */
privreq->req.result = result;
/* Callback to the request completion handler */
privreq->flink = NULL;
privreq->req.callback(&privep->ep, &privreq->req);
/* Restore the stalled indication */
privep->stalled = stalled;
}
}
/****************************************************************************
* Name: tm32_epwrite
****************************************************************************/
static void stm32_epwrite(struct stm32_usbdev_s *priv,
struct stm32_ep_s *privep,
const ubyte *buf, uint32 nbytes)
{
ubyte epno = USB_EPNO(privep->ep.eplog);
usbtrace(TRACE_WRITE(epno), nbytes);
/* Check for a zero-length packet */
if (nbytes > 0)
{
/* Copy the data from the user buffer into packet memory for this
* endpoint
*/
stm32_copytopma(buf, stm32_geteptxaddr(epno), nbytes);
}
/* Send the packet (might be a null packet nbytes == 0) */
stm32_seteptxcount(epno, nbytes);
priv->txstatus = USB_EPR_STATTX_VALID;
/* Indicate that there is data in the TX packet memory. This will be cleared
* when the next data out interrupt is received.
*/
privep->txbusy = TRUE;
}
/****************************************************************************
* Name: stm32_wrrequest
****************************************************************************/
static int stm32_wrrequest(struct stm32_usbdev_s *priv, struct stm32_ep_s *privep)
{
struct stm32_req_s *privreq;
ubyte *buf;
ubyte epno;
int nbytes;
int bytesleft;
/* We get here when an IN endpoint interrupt occurs. So now we know that
* there is no TX transfer in progress.
*/
privep->txbusy = FALSE;
/* Check the request from the head of the endpoint request queue */
privreq = stm32_rqpeek(privep);
if (!privreq)
{
/* There is no TX transfer in progress and no new pending TX
* requests to send... STALL the TX status.
*/
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_EPINQEMPTY), 0);
priv->devstate = DEVSTATE_IDLE;
return OK;
}
epno = USB_EPNO(privep->ep.eplog);
ullvdbg("epno=%d req=%p: len=%d xfrd=%d nullpkt=%d\n",
epno, privreq, privreq->req.len, privreq->req.xfrd, privep->txnullpkt);
/* Get the number of bytes left to be sent in the packet */
bytesleft = privreq->req.len - privreq->req.xfrd;
nbytes = bytesleft;
#warning "REVISIT: If the EP supports double buffering, then we can do better"
/* Send the next packet */
if (nbytes > 0)
{
/* Either send the maxpacketsize or all of the remaining data in
* the request.
*/
privep->txnullpkt = 0;
if (nbytes >= privep->ep.maxpacket)
{
nbytes = privep->ep.maxpacket;
/* Handle the case where this packet is exactly the
* maxpacketsize. Do we need to send a zero-length packet
* in this case?
*/
if (bytesleft == privep->ep.maxpacket &&
(privreq->req.flags & USBDEV_REQFLAGS_NULLPKT) != 0)
{
privep->txnullpkt = 1;
}
}
}
/* Send the packet (might be a null packet nbytes == 0) */
buf = privreq->req.buf + privreq->req.xfrd;
stm32_epwrite(priv, privep, buf, nbytes);
priv->devstate = DEVSTATE_WRREQUEST;
/* Update for the next data IN interrupt */
privreq->req.xfrd += nbytes;
bytesleft = privreq->req.len - privreq->req.xfrd;
/* If all of the bytes were sent (including any final null packet)
* then we are finished with the transfer
*/
if (bytesleft == 0 && !privep->txnullpkt)
{
usbtrace(TRACE_COMPLETE(USB_EPNO(privep->ep.eplog)), privreq->req.xfrd);
privep->txnullpkt = 0;
stm32_reqcomplete(privep, OK);
priv->devstate = DEVSTATE_IDLE;
}
return OK;
}
/****************************************************************************
* Name: stm32_rdrequest
****************************************************************************/
static int stm32_rdrequest(struct stm32_usbdev_s *priv, struct stm32_ep_s *privep)
{
struct stm32_req_s *privreq;
uint32 src;
ubyte *dest;
ubyte epno;
int pmalen;
int readlen;
/* Check the request from the head of the endpoint request queue */
epno = USB_EPNO(privep->ep.eplog);
privreq = stm32_rqpeek(privep);
if (!privreq)
{
/* Incoming data available in PMA, but no packet to receive the data.
* Mark that the RX data is pending and hope that a packet is returned
* soon.
*/
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_EPOUTQEMPTY), epno);
priv->rxpending = TRUE;
return OK;
}
ullvdbg("EP%d: len=%d xfrd=%d\n", epno, privreq->req.len, privreq->req.xfrd);
/* Ignore any attempt to receive a zero length packet */
if (privreq->req.len == 0)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_EPOUTNULLPACKET), 0);
stm32_reqcomplete(privep, OK);
return OK;
}
usbtrace(TRACE_READ(USB_EPNO(privep->ep.eplog)), privreq->req.xfrd);
/* Get the source and desintion transfer addresses */
dest = privreq->req.buf + privreq->req.xfrd;
src = stm32_geteprxaddr(epno);
/* Get the number of bytes to read from packet memory */
#warning "Doesn't this length include 2 bytes for the CRC?"
pmalen = stm32_geteprxcount(epno);
readlen = MIN(privreq->req.len, pmalen);
/* Receive the next packet */
stm32_copyfrompma(dest, src, readlen);
priv->devstate = DEVSTATE_RDREQUEST;
/* If the receive buffer is full then we are finished with the transfer */
privreq->req.xfrd += readlen;
if (privreq->req.xfrd >= privreq->req.len)
{
/* Complete the transfer and mark the state IDLE. The endpoint
* RX will be marked valid when the data phase completes.
*/
usbtrace(TRACE_COMPLETE(epno), privreq->req.xfrd);
stm32_reqcomplete(privep, OK);
priv->devstate = DEVSTATE_IDLE;
}
return OK;
}
/****************************************************************************
* Name: stm32_cancelrequests
****************************************************************************/
static void stm32_cancelrequests(struct stm32_ep_s *privep)
{
while (!stm32_rqempty(privep))
{
usbtrace(TRACE_COMPLETE(USB_EPNO(privep->ep.eplog)),
(stm32_rqpeek(privep))->req.xfrd);
stm32_reqcomplete(privep, -ESHUTDOWN);
}
}
/****************************************************************************
* Interrupt Level Processing
****************************************************************************/
/****************************************************************************
* Name: stm32_dispatchrequest
****************************************************************************/
static void stm32_dispatchrequest(struct stm32_usbdev_s *priv)
{
int ret;
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_DISPATCH), 0);
if (priv && priv->driver)
{
/* Forward to the control request to the class driver implementation */
ret = CLASS_SETUP(priv->driver, &priv->usbdev, &priv->ctrl);
if (ret < 0)
{
/* Stall on failure */
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_DISPATCHSTALL), 0);
priv->devstate = DEVSTATE_STALLED;
}
}
}
/****************************************************************************
* Name: stm32_epdone
****************************************************************************/
static void stm32_epdone(struct stm32_usbdev_s *priv, ubyte epno)
{
struct stm32_ep_s *privep;
uint16 epr;
/* Decode and service non control endpoints interrupt */
epr = stm32_getreg(STM32_USB_EPR(epno));
privep = &priv->eplist[epno];
/* OUT: host-to-device
* CTR_RX is set by the hardware when an OUT/SETUP transaction
* successfully completed on this endpoint.
*/
if ((epr & USB_EPR_CTR_RX) != 0)
{
/* Clear interrupt status */
stm32_clrepctrrx(epno);
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_EPOUTDONE), epno);
/* Handle read requests: Read host data into the current read request */
priv->rxstatus = USB_EPR_STATRX_VALID;
if (!stm32_rqempty(privep))
{
stm32_rdrequest(priv, privep);
}
else
{
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_EPOUTPENDING), (uint16)epno);
priv->rxstatus = USB_EPR_STATRX_NAK;
priv->rxpending = 1;
}
/* Set the new RX status */
stm32_seteprxstatus(epno, priv->rxstatus);
}
/* IN: device-to-host
* CTR_TX is set when an IN transaction successfully completes on
* an endpoint
*/
else if ((epr & USB_EPR_CTR_TX) != 0)
{
/* Clear interrupt status */
stm32_clrepctrtx(epno);
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_EPINDONE), epr);
/* Handle write requests */
privep->txbusy = FALSE;
priv->rxstatus = USB_EPR_STATRX_NAK;
stm32_wrrequest(priv, privep);
/* Set the new RX status */
stm32_seteptxstatus(epno, priv->txstatus);
}
}
/****************************************************************************
* Name: stm32_setdevaddr
****************************************************************************/
static void stm32_setdevaddr(struct stm32_usbdev_s *priv, ubyte value)
{
int epno;
/* Set address in every allocated endpoint */
for (epno = 0; epno < STM32_NENDPOINTS; epno++)
{
if (stm32_epreserved(priv, epno))
{
stm32_setepaddress((ubyte)epno, (ubyte)epno);
}
}
/* Set the device address and enable function */
stm32_putreg(value|USB_DADDR_EF, STM32_USB_DADDR);
}
/****************************************************************************
* Name: stm32_ep0setup
****************************************************************************/
static void stm32_ep0setup(struct stm32_usbdev_s *priv)
{
struct stm32_ep_s *ep0 = &priv->eplist[EP0];
struct stm32_req_s *privreq = stm32_rqpeek(ep0);
struct stm32_ep_s *privep;
union wb_u value;
union wb_u index;
union wb_u len;
union wb_u response;
boolean handled = FALSE;
ubyte epno;
int nbytes = 0; /* Assume zero-length packet */
int ret;
/* Terminate any pending requests */
while (!stm32_rqempty(ep0))
{
sint16 result = OK;
if (privreq->req.xfrd != privreq->req.len)
{
result = -EPROTO;
}
usbtrace(TRACE_COMPLETE(ep0->ep.eplog), privreq->req.xfrd);
stm32_reqcomplete(ep0, result);
}
/* Assume NOT stalled */
ep0->stalled = 0;
/* Get a 32-bit PMA address and use that to get the 8-byte setup request */
stm32_copyfrompma((ubyte*)&priv->ctrl, stm32_geteprxaddr(EP0), USB_SIZEOF_CTRLREQ);
/* And extract the little-endian 16-bit values to host order */
value.w = GETUINT16(priv->ctrl.value);
index.w = GETUINT16(priv->ctrl.index);
len.w = GETUINT16(priv->ctrl.len);
ullvdbg("SETUP: type=%02x req=%02x value=%04x index=%04x len=%04x\n",
priv->ctrl.type, priv->ctrl.req, value.w, index.w, len.w);
priv->devstate = DEVSTATE_IDLE;
/* Dispatch any non-standard requests */
if ((priv->ctrl.type & USB_REQ_TYPE_MASK) != USB_REQ_TYPE_STANDARD)
{
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_NOSTDREQ), priv->ctrl.type);
/* Let the class implementation handle all non-standar requests */
stm32_dispatchrequest(priv);
handled = TRUE;
}
/* Handle standard request. Pick off the things of interest to the
* USB device controller driver; pass what is left to the class driver
*/
switch (priv->ctrl.req)
{
case USB_REQ_GETSTATUS:
{
/* type: device-to-host; recipient = device, interface, endpoint
* value: 0
* index: zero interface endpoint
* len: 2; data = status
*/
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_GETSTATUS), priv->ctrl.type);
if (len.w != 2 || (priv->ctrl.type & USB_REQ_DIR_IN) == 0 ||
index.b[MSB] != 0 || value.w != 0)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_BADEPGETSTATUS), 0);
priv->devstate = DEVSTATE_STALLED;
}
else
{
switch (priv->ctrl.type & USB_REQ_RECIPIENT_MASK)
{
case USB_REQ_RECIPIENT_ENDPOINT:
{
epno = USB_EPNO(index.b[LSB]);
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_EPGETSTATUS), epno);
if (epno >= STM32_NENDPOINTS)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_BADEPGETSTATUS), epno);
priv->devstate = DEVSTATE_STALLED;
}
else
{
privep = &priv->eplist[epno];
response.w = 0; /* Not stalled */
nbytes = 2; /* Response size: 2 bytes */
if (USB_ISEPIN(index.b[LSB]))
{
/* IN endpoint */
if (stm32_eptxstalled(epno))
{
/* IN Endpoint stalled */
response.b[LSB] = 1; /* Stalled */
}
}
else
{
/* OUT endpoint */
if (stm32_eprxstalled(epno))
{
/* OUT Endpoint stalled */
response.b[LSB] = 1; /* Stalled */
}
}
}
}
break;
case USB_REQ_RECIPIENT_DEVICE:
{
if (index.w == 0)
{
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_DEVGETSTATUS), 0);
/* Features: Remote Wakeup=YES; selfpowered=? */
response.w = 0;
response.b[LSB] = (priv->selfpowered << USB_FEATURE_SELFPOWERED) |
(1 << USB_FEATURE_REMOTEWAKEUP);
nbytes = 2; /* Response size: 2 bytes */
}
else
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_BADDEVGETSTATUS), 0);
priv->devstate = DEVSTATE_STALLED;
}
}
break;
case USB_REQ_RECIPIENT_INTERFACE:
{
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_IFGETSTATUS), 0);
response.w = 0;
nbytes = 2; /* Response size: 2 bytes */
}
break;
default:
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_BADGETSTATUS), 0);
priv->devstate = DEVSTATE_STALLED;
}
break;
}
}
}
break;
case USB_REQ_CLEARFEATURE:
{
/* type: host-to-device; recipient = device, interface or endpoint
* value: feature selector
* index: zero interface endpoint;
* len: zero, data = none
*/
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_CLEARFEATURE), priv->ctrl.type);
if ((priv->ctrl.type & USB_REQ_RECIPIENT_MASK) != USB_REQ_RECIPIENT_ENDPOINT)
{
/* Let the class implementation handle all recipients (except for the
* endpoint recipient)
*/
stm32_dispatchrequest(priv);
handled = TRUE;
}
else
{
/* Endpoint recipient */
epno = USB_EPNO(index.b[LSB]);
if (epno < STM32_NENDPOINTS && index.b[MSB] == 0 &&
value.w == USB_FEATURE_ENDPOINTHALT && len.w == 0)
{
privep = &priv->eplist[epno];
privep->halted = 0;
ret = stm32_epstall(&privep->ep, TRUE);
}
else
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_BADCLEARFEATURE), 0);
priv->devstate = DEVSTATE_STALLED;
}
}
}
break;
case USB_REQ_SETFEATURE:
{
/* type: host-to-device; recipient = device, interface, endpoint
* value: feature selector
* index: zero interface endpoint;
* len: 0; data = none
*/
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_SETFEATURE), priv->ctrl.type);
if (((priv->ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE) &&
value.w == USB_FEATURE_TESTMODE)
{
/* Special case recipient=device test mode */
ullvdbg("test mode: %d\n", index.w);
}
else if ((priv->ctrl.type & USB_REQ_RECIPIENT_MASK) != USB_REQ_RECIPIENT_ENDPOINT)
{
/* The class driver handles all recipients except recipient=endpoint */
stm32_dispatchrequest(priv);
handled = TRUE;
}
else
{
/* Handler recipient=endpoint */
epno = USB_EPNO(index.b[LSB]);
if (epno < STM32_NENDPOINTS && index.b[MSB] == 0 &&
value.w == USB_FEATURE_ENDPOINTHALT && len.w == 0)
{
privep = &priv->eplist[epno];
privep->halted = 1;
ret = stm32_epstall(&privep->ep, FALSE);
}
else
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_BADSETFEATURE), 0);
priv->devstate = DEVSTATE_STALLED;
}
}
}
break;
case USB_REQ_SETADDRESS:
{
/* type: host-to-device; recipient = device
* value: device address
* index: 0
* len: 0; data = none
*/
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_EP0SETUPSETADDRESS), value.w);
if ((priv->ctrl.type & USB_REQ_RECIPIENT_MASK) != USB_REQ_RECIPIENT_DEVICE ||
index.w != 0 || len.w != 0 || value.w > 127)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_BADSETADDRESS), 0);
priv->devstate = DEVSTATE_STALLED;
}
/* Note that setting of the device address will be deferred. A zero-length
* packet will be sent and the device address will be set when the zero-
* length packet transfer completes.
*/
}
break;
case USB_REQ_GETDESCRIPTOR:
/* type: device-to-host; recipient = device
* value: descriptor type and index
* index: 0 or language ID;
* len: descriptor len; data = descriptor
*/
case USB_REQ_SETDESCRIPTOR:
/* type: host-to-device; recipient = device
* value: descriptor type and index
* index: 0 or language ID;
* len: descriptor len; data = descriptor
*/
{
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_GETSETDESC), priv->ctrl.type);
if ((priv->ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE)
{
/* The request seems valid... let the class implementation handle it */
stm32_dispatchrequest(priv);
handled = TRUE;
}
else
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_BADGETSETDESC), 0);
priv->devstate = DEVSTATE_STALLED;
}
}
break;
case USB_REQ_GETCONFIGURATION:
/* type: device-to-host; recipient = device
* value: 0;
* index: 0;
* len: 1; data = configuration value
*/
{
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_GETCONFIG), priv->ctrl.type);
if ((priv->ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE &&
value.w == 0 && index.w == 0 && len.w == 1)
{
/* The request seems valid... let the class implementation handle it */
stm32_dispatchrequest(priv);
handled = TRUE;
}
else
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_BADGETCONFIG), 0);
priv->devstate = DEVSTATE_STALLED;
}
}
break;
case USB_REQ_SETCONFIGURATION:
/* type: host-to-device; recipient = device
* value: configuration value
* index: 0;
* len: 0; data = none
*/
{
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_SETCONFIG), priv->ctrl.type);
if ((priv->ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE &&
index.w == 0 && len.w == 0)
{
/* The request seems valid... let the class implementation handle it */
stm32_dispatchrequest(priv);
handled = TRUE;
}
else
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_BADSETCONFIG), 0);
priv->devstate = DEVSTATE_STALLED;
}
}
break;
case USB_REQ_GETINTERFACE:
/* type: device-to-host; recipient = interface
* value: 0
* index: interface;
* len: 1; data = alt interface
*/
case USB_REQ_SETINTERFACE:
/* type: host-to-device; recipient = interface
* value: alternate setting
* index: interface;
* len: 0; data = none
*/
{
/* Let the class implementation handle the request */
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_GETSETIF), priv->ctrl.type);
stm32_dispatchrequest(priv);
handled = TRUE;
}
break;
case USB_REQ_SYNCHFRAME:
/* type: device-to-host; recipient = endpoint
* value: 0
* index: endpoint;
* len: 2; data = frame number
*/
{
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_SYNCHFRAME), 0);
}
break;
default:
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_INVALIDCTRLREQ), priv->ctrl.req);
priv->devstate = DEVSTATE_STALLED;
}
break;
}
/* At this point, the request has been handled and there are three possible
* outcomes:
*
* 1. The setup request was successfully handled above and a response packet
* must be sent (may be a zero length packet).
* 2. The request was successfully handled by the class implementation. In
* case, the EP0 IN response has already been queued and the local variable
* 'handled' will be set to TRUE and devstate != DEVSTATE_STALLED;
* 3. An error was detected in either the above logic or by the class implementation
* logic. In either case, priv->state will be set DEVSTATE_STALLED
* to indicate this case.
*/
if (priv->devstate != DEVSTATE_STALLED && !handled)
{
/* We will response. First, restrict the data length to the length
* requested in the setup packet
*/
if (nbytes > len.w)
{
nbytes = len.w;
}
/* Send the response (might be a zero-length packet) */
stm32_epwrite(priv, ep0, response.b, nbytes);
priv->devstate = DEVSTATE_IDLE;
}
}
/****************************************************************************
* Name: stm32_ep0in
****************************************************************************/
static void stm32_ep0in(struct stm32_usbdev_s *priv)
{
/* There is no longer anything in the EP0 TX packet memory */
priv->eplist[EP0].txbusy = FALSE;
/* Are we processing the completion of one packet of an outgoing request
* from the class driver?
*/
if (priv->devstate == DEVSTATE_WRREQUEST)
{
stm32_wrrequest(priv, &priv->eplist[EP0]);
}
/* No.. Are we processing the completion of a status response? */
else if (priv->devstate == DEVSTATE_IDLE)
{
/* Look at the saved SETUP command. Was it a SET ADDRESS request?
* If so, then now is the time to set the address.
*/
if (priv->ctrl.req == USB_REQ_SETADDRESS &&
(priv->ctrl.type & REQRECIPIENT_MASK) == (USB_REQ_TYPE_STANDARD | USB_REQ_RECIPIENT_DEVICE))
{
union wb_u value;
value.w = GETUINT16(priv->ctrl.value);
stm32_setdevaddr(priv, value.b[LSB]);
}
}
else
{
priv->devstate = DEVSTATE_STALLED;
}
}
/****************************************************************************
* Name: stm32_ep0out
****************************************************************************/
static void stm32_ep0out(struct stm32_usbdev_s *priv)
{
struct stm32_ep_s *privep = &priv->eplist[EP0];
switch (priv->devstate)
{
case DEVSTATE_RDREQUEST: /* Write request in progress */
case DEVSTATE_IDLE: /* No transfer in progress */
stm32_rdrequest(priv, privep);
break;
default:
/* Unexpected state OR host aborted the OUT transfer before it
* completed, STALL the endpoint in either case
*/
priv->devstate = DEVSTATE_STALLED;
break;
}
}
/****************************************************************************
* Name: stm32_ep0done
****************************************************************************/
static inline void stm32_ep0done(struct stm32_usbdev_s *priv, uint16 istr)
{
uint16 epr;
/* Initialize RX and TX status. We shouldn't have to actually look at the
* status because the hardware is supposed to set the both RX and TX status
* to NAK when an EP0 SETUP occurs (of course, this might not be a setup)
*/
priv->rxstatus = USB_EPR_STATRX_NAK;
priv->txstatus = USB_EPR_STATTX_NAK;
/* Set both RX and TX status to NAK */
stm32_seteprxstatus(EP0, USB_EPR_STATRX_NAK);
stm32_seteptxstatus(EP0, USB_EPR_STATTX_NAK);
/* Check the direction bit to determine if this the completion of an EP0
* packet sent to or received from the host PC.
*/
if ((istr & USB_ISTR_DIR) == 0)
{
/* EP0 IN: device-to-host (DIR=0) */
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_EP0IN), istr);
stm32_clrepctrtx(EP0);
stm32_ep0in(priv);
}
else
{
/* EP0 OUT: host-to-device (DIR=1) */
epr = stm32_getreg(STM32_USB_EPR(EP0));
/* CTR_TX is set when an IN transaction successfully
* completes on an endpoint
*/
if ((epr & USB_EPR_CTR_TX) != 0)
{
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_EP0INDONE), epr);
stm32_clrepctrtx(EP0);
stm32_ep0in(priv);
}
/* SETUP is set by the hardware when the last completed
* transaction was a control endpoint SETUP
*/
else if ((epr & USB_EPR_SETUP) != 0)
{
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_EP0SETUPDONE), epr);
stm32_clrepctrrx(EP0);
stm32_ep0setup(priv);
}
/* Set by the hardware when an OUT/SETUP transaction successfully
* completed on this endpoint.
*/
else if ((epr & USB_EPR_CTR_RX) != 0)
{
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_EP0OUTDONE), epr);
stm32_clrepctrrx(EP0);
stm32_ep0out(priv);
}
/* None of the above */
else
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_EP0BADCTR), epr);
return; /* Does this ever happen? */
}
}
/* Make sure that the EP0 packet size is still OK (superstitious?) */
stm32_seteprxcount(EP0, STM32_EP0MAXPACKET);
/* Now figure out the new RX/TX status. Here are all possible
* consequences of the above EP0 operations:
*
* rxstatus txstatus devstate MEANING
* -------- -------- --------- ---------------------------------
* NAK NAK IDLE Nothing happened
* NAK VALID IDLE EP0 response sent from USBDEV driver
* NAK VALID WRREQUEST EP0 response sent from class driver
* NAK --- STALL Some protocol error occurred
*
* First handle the STALL condition:
*/
if (priv->devstate == DEVSTATE_STALLED)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_EP0SETUPSTALLED), priv->devstate);
priv->rxstatus = USB_EPR_STATRX_STALL;
priv->txstatus = USB_EPR_STATTX_STALL;
}
/* Was a transmission started? If so, txstatus will be VALID. The
* only special case to handle is when both are set to NAK. In that
* case, we need to for RX status to VALID in order to accept the next
* SETUP request.
*/
else if (priv->rxstatus == USB_EPR_STATRX_NAK &&
priv->txstatus == USB_EPR_STATTX_NAK)
{
priv->rxstatus = USB_EPR_STATRX_VALID;
}
/* Now set the new TX and RX status */
stm32_seteprxstatus(EP0, priv->rxstatus);
stm32_seteptxstatus(EP0, priv->txstatus);
}
/****************************************************************************
* Name: stm32_lptransfer
****************************************************************************/
static void stm32_lptransfer(struct stm32_usbdev_s *priv)
{
ubyte epno;
uint16 istr;
/* Stay in loop while LP interrupts are pending */
while (((istr = stm32_getreg(STM32_USB_ISTR)) & USB_ISTR_CTR) != 0)
{
stm32_putreg((uint16)~USB_ISTR_CTR, STM32_USB_ISTR);
/* Extract highest priority endpoint number */
epno = (ubyte)(istr & USB_ISTR_EPID_MASK);
/* Handle EP0 completion events */
if (epno == 0)
{
stm32_ep0done(priv, istr);
}
/* Handle other endpoint completion events */
else
{
stm32_epdone(priv, epno);
}
}
}
/****************************************************************************
* Name: stm32_hpinterrupt
****************************************************************************/
static int stm32_hpinterrupt(int irq, void *context)
{
/* For now there is only one USB controller, but we will always refer to
* it using a pointer to make any future ports to multiple USB controllers
* easier.
*/
struct stm32_usbdev_s *priv = &g_usbdev;
uint16 istr;
ubyte epno;
/* High priority interrupts are only triggered by a correct transfer event
* for isochronous and double-buffer bulk transfers.
*/
istr = stm32_getreg(STM32_USB_ISTR);
usbtrace(TRACE_INTENTRY(STM32_TRACEINTID_HPINTERRUPT), istr);
while ((istr & USB_ISTR_CTR) != 0)
{
stm32_putreg((uint16)~USB_ISTR_CTR, STM32_USB_ISTR);
/* Extract highest priority endpoint number */
epno = (ubyte)(istr & USB_ISTR_EPID_MASK);
/* And handle the completion event */
stm32_epdone(priv, epno);
/* Fetch the status again for the next time through the loop */
istr = stm32_getreg(STM32_USB_ISTR);
}
usbtrace(TRACE_INTEXIT(STM32_TRACEINTID_HPINTERRUPT), 0);
return OK;
}
/****************************************************************************
* Name: stm32_lpinterrupt
****************************************************************************/
static int stm32_lpinterrupt(int irq, void *context)
{
/* For now there is only one USB controller, but we will always refer to
* it using a pointer to make any future ports to multiple USB controllers
* easier.
*/
struct stm32_usbdev_s *priv = &g_usbdev;
uint16 istr = stm32_getreg(STM32_USB_ISTR);
usbtrace(TRACE_INTENTRY(STM32_TRACEINTID_LPINTERRUPT), istr);
/* Handle Reset interrupts. When this event occurs, the peripheral is left
* in the same conditions it is left by the system reset (but with the
* USB controller enabled).
*/
if ((istr & USB_ISTR_RESET) != 0)
{
/* Wakeup interrupt received. Clear the WKUP interrupt status. The cause of
* the wakeup is indicated in the FNR register
*/
stm32_putreg(~USB_ISTR_RESET, STM32_USB_ISTR);
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_RESET), stm32_getreg(STM32_USB_FNR));
/* Restore our power-up state and exit now because istr is no longer
* valid.
*/
stm32_reset(priv);
goto exit_lpinterrupt;
}
/* Handle Wakeup interrupts. This interrupt is only enable while the USB is
* suspended.
*/
if ((istr & USB_ISTR_WKUP & priv->imask) != 0)
{
/* Wakeup interrupt received. Clear the WKUP interrupt status. */
stm32_putreg(~USB_ISTR_WKUP, STM32_USB_ISTR);
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_WKUP), 0);
/* Perform the wakeup action */
stm32_initresume(priv);
priv->rsmstate = RSMSTATE_IDLE;
/* Disable ESOF polling, disable the wakeup interrupt, and
* re-enable the suspend interrupt. Clear any pending SUSP
* interrupts.
*/
stm32_setimask(priv, USB_CNTR_SUSPM, USB_CNTR_ESOFM|USB_CNTR_WKUPM);
stm32_putreg(~USB_CNTR_SUSPM, STM32_USB_ISTR);
}
if ((istr & USB_ISTR_SUSP & priv->imask) != 0)
{
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_SUSP), 0);
stm32_suspend(priv);
/* Clear of the ISTR bit must be done after setting of USB_CNTR_FSUSP */
stm32_putreg(~USB_ISTR_SUSP, STM32_USB_ISTR);
}
if ((istr & USB_ISTR_ESOF & priv->imask) != 0)
{
stm32_putreg(~USB_ISTR_ESOF, STM32_USB_ISTR);
/* Resume handling timing is made with ESOFs */
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_ESOF), 0);
stm32_esofpoll(priv);
}
if ((istr & USB_ISTR_CTR & priv->imask) != 0)
{
/* Low priority endpoint correct transfer interrupt */
usbtrace(TRACE_INTDECODE(STM32_TRACEINTID_LPCTR), istr);
stm32_lptransfer(priv);
}
exit_lpinterrupt:
usbtrace(TRACE_INTEXIT(STM32_TRACEINTID_LPINTERRUPT), stm32_getreg(STM32_USB_EP0R));
return OK;
}
/****************************************************************************
* Name: stm32_setimask
****************************************************************************/
static void
stm32_setimask(struct stm32_usbdev_s *priv, uint16 setbits, uint16 clrbits)
{
uint16 regval;
/* Adjust the interrupt mask bits in the shadow copy first */
priv->imask &= ~clrbits;
priv->imask |= setbits;
/* Then make the interrupt mask bits in the CNTR register match the shadow
* register (Hmmm... who is shadowing whom?)
*/
regval = stm32_getreg(STM32_USB_CNTR);
regval &= ~USB_CNTR_ALLINTS;
regval |= priv->imask;
stm32_putreg(regval, STM32_USB_CNTR);
}
/****************************************************************************
* Suspend/Resume Helpers
****************************************************************************/
/****************************************************************************
* Name: stm32_suspend
****************************************************************************/
static void stm32_suspend(struct stm32_usbdev_s *priv)
{
uint16 regval;
/* Disable ESOF polling, disable the SUSP interrupt, and enable the WKUP
* interrupt. Clear any pending WKUP interrupt.
*/
stm32_setimask(priv, USB_CNTR_WKUPM, USB_CNTR_ESOFM|USB_CNTR_SUSPM);
stm32_putreg(~USB_ISTR_WKUP, STM32_USB_ISTR);
/* Set the FSUSP bit in the CNTR register. This activates suspend mode
* within the USB peripheral and disables further SUSP interrupts.
*/
regval = stm32_getreg(STM32_USB_CNTR);
regval |= USB_CNTR_FSUSP;
stm32_putreg(regval, STM32_USB_CNTR);
/* If we are not a self-powered device, the got to low-power mode */
if (!priv->selfpowered)
{
/* Setting LPMODE in the CNTR register removes static power
* consumption in the USB analog transceivers but keeps them
* able to detect resume activity
*/
regval = stm32_getreg(STM32_USB_CNTR);
regval |= USB_CNTR_LPMODE;
stm32_putreg(regval, STM32_USB_CNTR);
}
/* Let the board-specific logic know that we have entered the suspend
* state
*/
stm32_usbsuspend((struct usbdev_s *)priv, FALSE);
}
/****************************************************************************
* Name: stm32_initresume
****************************************************************************/
static void stm32_initresume(struct stm32_usbdev_s *priv)
{
uint16 regval;
/* This function is called when either (1) a WKUP interrupt is received from
* the host PC, or (2) the class device implementation calls the wakeup()
* method.
*/
/* Clear the USB low power mode (lower power mode was not set if this is
* a self-powered device. Also, low power mode is automatically cleared by
* hardware when a WKUP interrupt event occurs).
*/
regval = stm32_getreg(STM32_USB_CNTR);
regval &= (~USB_CNTR_LPMODE);
stm32_putreg(regval, STM32_USB_CNTR);
/* Restore full power -- whatever that means for this particular board */
stm32_usbsuspend((struct usbdev_s *)priv, TRUE);
/* Reset FSUSP bit and enable normal interrupt handling */
stm32_putreg(STM32_CNTR_SETUP, STM32_USB_CNTR);
}
/****************************************************************************
* Name: stm32_esofpoll
****************************************************************************/
static void stm32_esofpoll(struct stm32_usbdev_s *priv)
{
uint16 regval;
/* Called periodically from ESOF interrupt after RSMSTATE_STARTED */
switch (priv->rsmstate)
{
/* One ESOF after internal resume requested */
case RSMSTATE_STARTED:
regval = stm32_getreg(STM32_USB_CNTR);
regval |= USB_CNTR_RESUME;
stm32_putreg(regval, STM32_USB_CNTR);
priv->rsmstate = RSMSTATE_WAITING;
priv->nesofs = 10;
break;
/* Countdown before completing the operation */
case RSMSTATE_WAITING:
priv->nesofs--;
if (priv->nesofs == 0)
{
/* Okay.. we are ready to resume normal operation */
regval = stm32_getreg(STM32_USB_CNTR);
regval &= (~USB_CNTR_RESUME);
stm32_putreg(regval, STM32_USB_CNTR);
priv->rsmstate = RSMSTATE_IDLE;
/* Disable ESOF polling, disable the SUSP interrupt, and enable
* the WKUP interrupt. Clear any pending WKUP interrupt.
*/
stm32_setimask(priv, USB_CNTR_WKUPM, USB_CNTR_ESOFM|USB_CNTR_SUSPM);
stm32_putreg(~USB_ISTR_WKUP, STM32_USB_ISTR);
}
break;
case RSMSTATE_IDLE:
default:
priv->rsmstate = RSMSTATE_IDLE;
break;
}
}
/****************************************************************************
* Endpoint Helpers
****************************************************************************/
/****************************************************************************
* Name: stm32_epreserve
****************************************************************************/
static inline struct stm32_ep_s *
stm32_epreserve(struct stm32_usbdev_s *priv, ubyte epset)
{
struct stm32_ep_s *privep = NULL;
irqstate_t flags;
int epndx = 0;
flags = irqsave();
epset &= priv->epavail;
if (epset)
{
/* Select the lowest bit in the set of matching, available endpoints
* (skipping EP0)
*/
for (epndx = 1; epndx < STM32_NENDPOINTS; epndx++)
{
ubyte bit = STM32_ENDP_BIT(epndx);
if ((epset & bit) != 0)
{
/* Mark the endpoint no longer available */
priv->epavail &= ~bit;
/* And return the pointer to the standard endpoint structure */
privep = &priv->eplist[epndx];
break;
}
}
}
irqrestore(flags);
return privep;
}
/****************************************************************************
* Name: stm32_epunreserve
****************************************************************************/
static inline void
stm32_epunreserve(struct stm32_usbdev_s *priv, struct stm32_ep_s *privep)
{
irqstate_t flags = irqsave();
priv->epavail |= STM32_ENDP_BIT(USB_EPNO(privep->ep.eplog));
irqrestore(flags);
}
/****************************************************************************
* Name: stm32_epreserved
****************************************************************************/
static inline boolean
stm32_epreserved(struct stm32_usbdev_s *priv, int epno)
{
return ((priv->epavail & STM32_ENDP_BIT(epno)) == 0);
}
/****************************************************************************
* Name: stm32_epallocpma
****************************************************************************/
static int stm32_epallocpma(struct stm32_usbdev_s *priv)
{
irqstate_t flags;
int bufno = ERROR;
int bufndx;
flags = irqsave();
for (bufndx = 2; bufndx < STM32_NBUFFERS; bufndx++)
{
/* Check if this buffer is available */
ubyte bit = STM32_BUFFER_BIT(bufndx);
if ((priv->bufavail & bit) != 0)
{
/* Yes.. Mark the endpoint no longer available */
priv->bufavail &= ~bit;
/* And return the index of the allocated buffer */
bufno = bufndx;
break;
}
}
irqrestore(flags);
return bufno;
}
/****************************************************************************
* Name: stm32_epfreepma
****************************************************************************/
static inline void
stm32_epfreepma(struct stm32_usbdev_s *priv, struct stm32_ep_s *privep)
{
irqstate_t flags = irqsave();
priv->epavail |= STM32_ENDP_BIT(privep->bufno);
irqrestore(flags);
}
/****************************************************************************
* Endpoint operations
****************************************************************************/
/****************************************************************************
* Name: stm32_epconfigure
****************************************************************************/
static int stm32_epconfigure(struct usbdev_ep_s *ep,
const struct usb_epdesc_s *desc,
boolean last)
{
struct stm32_ep_s *privep = (struct stm32_ep_s *)ep;
uint16 pma;
uint16 setting;
uint16 maxpacket;
ubyte epno;
#ifdef CONFIG_DEBUG
if (!ep || !desc)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_INVALIDPARMS), 0);
ulldbg("ERROR: ep=%p desc=%p\n");
return -EINVAL;
}
#endif
/* Get the unadorned endpoint address */
epno = USB_EPNO(desc->addr);
usbtrace(TRACE_EPCONFIGURE, (uint16)epno);
DEBUGASSERT(epno == USB_EPNO(ep->eplog));
/* Set the requested type */
switch (desc->attr & USB_EP_ATTR_XFERTYPE_MASK)
{
case USB_EP_ATTR_XFER_INT: /* Interrupt endpoint */
setting = USB_EPR_EPTYPE_INTERRUPT;
break;
case USB_EP_ATTR_XFER_BULK: /* Bulk endpoint */
setting = USB_EPR_EPTYPE_BULK;
break;
case USB_EP_ATTR_XFER_ISOC: /* Isochronous endpoint */
#warning "REVISIT: Need to review isochronous EP setup"
setting = USB_EPR_EPTYPE_ISOC;
break;
case USB_EP_ATTR_XFER_CONTROL: /* Control endpoint */
setting = USB_EPR_EPTYPE_CONTROL;
break;
default:
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_BADEPTYPE), (uint16)desc->type);
return -EINVAL;
}
stm32_seteptype(epno, setting);
/* Get the address of the PMA buffer allocated for this endpoint */
#warning "REVISIT: Should configure BULK EPs using double buffer feature"
pma = STM32_BUFNO2BUF(privep->bufno);
/* Get the maxpacket size of the endpoint. */
maxpacket = GETUINT16(desc->mxpacketsize);
DEBUGASSERT(maxpacket <= STM32_MAXPACKET_SIZE);
ep->maxpacket = maxpacket;
/* Get the subset matching the requested direction */
if (USB_ISEPIN(desc->addr))
{
/* The full, logical EP number includes direction (which is zero
* for IN endpoints.
*/
ep->eplog = USB_EPIN(epno);
/* Set up TX; disable RX */
stm32_seteptxaddr(epno, pma);
stm32_seteptxstatus(epno, USB_EPR_STATTX_NAK);
stm32_seteprxstatus(epno, USB_EPR_STATRX_DIS);
}
else
{
/* The full, logical EP number includes direction */
ep->eplog = USB_EPOUT(epno);
/* Set up RX; disable TX */
stm32_seteprxaddr(epno, pma);
stm32_seteprxcount(epno, maxpacket);
stm32_seteprxstatus(epno, USB_EPR_STATRX_VALID);
stm32_seteptxstatus(epno, USB_EPR_STATTX_DIS);
}
stm32_dumpep(epno);
return OK;
}
/****************************************************************************
* Name: stm32_epdisable
****************************************************************************/
static int stm32_epdisable(struct usbdev_ep_s *ep)
{
struct stm32_ep_s *privep = (struct stm32_ep_s *)ep;
irqstate_t flags;
ubyte epno;
#ifdef CONFIG_DEBUG
if (!ep)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_INVALIDPARMS), 0);
ulldbg("ERROR: ep=%p\n", ep);
return -EINVAL;
}
#endif
epno = USB_EPNO(ep->eplog);
usbtrace(TRACE_EPDISABLE, epno);
/* Cancel any ongoing activity */
flags = irqsave();
stm32_cancelrequests(privep);
/* Disable TX; disable RX */
stm32_seteprxcount(epno, 0);
stm32_seteprxstatus(epno, USB_EPR_STATRX_DIS);
stm32_seteptxstatus(epno, USB_EPR_STATTX_DIS);
irqrestore(flags);
return OK;
}
/****************************************************************************
* Name: stm32_epallocreq
****************************************************************************/
static struct usbdev_req_s *stm32_epallocreq(struct usbdev_ep_s *ep)
{
struct stm32_req_s *privreq;
#ifdef CONFIG_DEBUG
if (!ep)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_INVALIDPARMS), 0);
return NULL;
}
#endif
usbtrace(TRACE_EPALLOCREQ, USB_EPNO(ep->eplog));
privreq = (struct stm32_req_s *)malloc(sizeof(struct stm32_req_s));
if (!privreq)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_ALLOCFAIL), 0);
return NULL;
}
memset(privreq, 0, sizeof(struct stm32_req_s));
return &privreq->req;
}
/****************************************************************************
* Name: stm32_epfreereq
****************************************************************************/
static void stm32_epfreereq(struct usbdev_ep_s *ep, struct usbdev_req_s *req)
{
struct stm32_req_s *privreq = (struct stm32_req_s*)req;
#ifdef CONFIG_DEBUG
if (!ep || !req)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_INVALIDPARMS), 0);
return;
}
#endif
usbtrace(TRACE_EPFREEREQ, USB_EPNO(ep->eplog));
free(privreq);
}
/****************************************************************************
* Name: stm32_epsubmit
****************************************************************************/
static int stm32_epsubmit(struct usbdev_ep_s *ep, struct usbdev_req_s *req)
{
struct stm32_req_s *privreq = (struct stm32_req_s *)req;
struct stm32_ep_s *privep = (struct stm32_ep_s *)ep;
struct stm32_usbdev_s *priv;
irqstate_t flags;
int ret = OK;
#ifdef CONFIG_DEBUG
if (!req || !req->callback || !req->buf || !ep)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_INVALIDPARMS), 0);
ulldbg("ERROR: req=%p callback=%p buf=%p ep=%p\n", req, req->callback, req->buf, ep);
return -EINVAL;
}
#endif
usbtrace(TRACE_EPSUBMIT, USB_EPNO(ep->eplog));
priv = privep->dev;
#ifdef CONFIG_DEBUG
if (!priv->driver)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_NOTCONFIGURED), priv->usbdev.speed);
ulldbg("ERROR: driver=%p\n", priv->driver);
return -ESHUTDOWN;
}
#endif
/* Handle the request from the class driver */
req->result = -EINPROGRESS;
req->xfrd = 0;
flags = irqsave();
/* If we are stalled, then drop all requests on the floor */
if (privep->stalled)
{
stm32_abortrequest(privep, privreq, -EBUSY);
ulldbg("ERROR: stalled\n");
ret = -EBUSY;
}
/* Handle IN (device-to-host) requests. NOTE: If the class device is
* using the bi-directional EP0, then we assume that they intend the EP0
* IN functionality.
*/
else if (USB_ISEPIN(ep->eplog) || USB_EPNO(ep->eplog) == EP0)
{
/* Add the new request to the request queue for the IN endpoint */
stm32_rqenqueue(privep, privreq);
usbtrace(TRACE_INREQQUEUED(USB_EPNO(ep->eplog)), req->len);
/* If the IN endpoint FIFO is available, then transfer the data now */
if (!privep->txbusy)
{
ret = stm32_wrrequest(priv, privep);
}
}
/* Handle OUT (host-to-device) requests */
else
{
/* Add the new request to the request queue for the OUT endpoint */
privep->txnullpkt = 0;
stm32_rqenqueue(privep, privreq);
usbtrace(TRACE_OUTREQQUEUED(USB_EPNO(ep->eplog)), req->len);
/* This there a incoming data pending the availability of a request? */
if (priv->rxpending)
{
ret = stm32_rdrequest(priv, privep);
priv->rxpending = 0;
}
}
irqrestore(flags);
return ret;
}
/****************************************************************************
* Name: stm32_epcancel
****************************************************************************/
static int stm32_epcancel(struct usbdev_ep_s *ep, struct usbdev_req_s *req)
{
struct stm32_ep_s *privep = (struct stm32_ep_s *)ep;
struct stm32_usbdev_s *priv;
irqstate_t flags;
#ifdef CONFIG_DEBUG
if (!ep || !req)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_INVALIDPARMS), 0);
return -EINVAL;
}
#endif
usbtrace(TRACE_EPCANCEL, USB_EPNO(ep->eplog));
priv = privep->dev;
flags = irqsave();
stm32_cancelrequests(privep);
irqrestore(flags);
return OK;
}
/****************************************************************************
* Name: stm32_epstall
****************************************************************************/
static int stm32_epstall(struct usbdev_ep_s *ep, boolean resume)
{
struct stm32_ep_s *privep;
struct stm32_usbdev_s *priv;
ubyte epno = USB_EPNO(ep->eplog);
uint16 status;
irqstate_t flags;
#ifdef CONFIG_DEBUG
if (!ep)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_INVALIDPARMS), 0);
return -EINVAL;
}
#endif
privep = (struct stm32_ep_s *)ep;
priv = (struct stm32_usbdev_s *)privep->dev;
epno = USB_EPNO(ep->eplog);
/* STALL or RESUME the endpoint */
flags = irqsave();
usbtrace(resume ? TRACE_EPRESUME : TRACE_EPSTALL, USB_EPNO(ep->eplog));
/* Get status of the endpoint; stall the request if the endpoint is
* disabled
*/
if (USB_ISEPIN(ep->eplog))
{
status = stm32_geteptxstatus(epno);
}
else
{
status = stm32_geteprxstatus(epno);
}
if (status == 0)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_EPDISABLED), 0);
priv->devstate = DEVSTATE_STALLED;
return -ENODEV;
}
/* Handle the resume condition */
if (resume)
{
/* Resuming a stalled endpoint */
usbtrace(TRACE_EPRESUME, epno);
privep->stalled = FALSE;
if (USB_ISEPIN(ep->eplog))
{
/* IN endpoint */
if (stm32_eptxstalled(epno))
{
stm32_clrtxdtog(epno);
/* Restart any queued write requests */
if (!stm32_rqempty(privep))
{
privep->txbusy = FALSE;
(void)stm32_wrrequest(priv, privep);
stm32_seteptxstatus(epno, USB_EPR_STATTX_VALID);
}
}
}
else
{
/* OUT endpoint */
if (stm32_eprxstalled(epno))
{
if (epno == EP0)
{
/* After clear the STALL, enable the default endpoint receiver */
stm32_seteprxcount(epno, ep->maxpacket);
}
else
{
stm32_clrrxdtog(epno);
}
stm32_seteprxstatus(epno, USB_EPR_STATRX_VALID);
}
}
}
/* Handle the stall condition */
else
{
usbtrace(TRACE_EPSTALL, epno);
privep->stalled = TRUE;
if (USB_ISEPIN(ep->eplog))
{
/* IN endpoint */
stm32_seteptxstatus(epno, USB_EPR_STATTX_STALL);
}
else
{
/* OUT endpoint */
stm32_seteprxstatus(epno, USB_EPR_STATRX_STALL);
}
}
irqrestore(flags);
return OK;
}
/****************************************************************************
* Device Controller Operations
****************************************************************************/
/****************************************************************************
* Name: stm32_allocep
****************************************************************************/
static struct usbdev_ep_s *stm32_allocep(struct usbdev_s *dev, ubyte epno,
boolean in, ubyte eptype)
{
struct stm32_usbdev_s *priv = (struct stm32_usbdev_s *)dev;
struct stm32_ep_s *privep = NULL;
ubyte epset = STM32_ENDP_ALLSET;
int bufno;
usbtrace(TRACE_DEVALLOCEP, (uint16)epno);
#ifdef CONFIG_DEBUG
if (!dev)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_INVALIDPARMS), 0);
return NULL;
}
#endif
/* Ignore any direction bits in the logical address */
epno = USB_EPNO(epno);
/* A logical address of 0 means that any endpoint will do */
if (epno > 0)
{
/* Otherwise, we will return the endpoint structure only for the requested
* 'logical' endpoint. All of the other checks will still be performed.
*
* First, verify that the logical endpoint is in the range supported by
* by the hardware.
*/
if (epno >= STM32_NENDPOINTS)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_BADEPNO), (uint16)epno);
return NULL;
}
/* Convert the logical address to a physical OUT endpoint address and
* remove all of the candidate endpoints from the bitset except for the
* the IN/OUT pair for this logical address.
*/
epset = STM32_ENDP_BIT(epno);
}
/* Check if the selected endpoint number is available */
privep = stm32_epreserve(priv, epset);
if (!privep)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_EPRESERVE), (uint16)epset);
goto errout;
}
epno = USB_EPNO(privep->ep.eplog);
/* Allocate a PMA buffer for this endpoint */
#warning "REVISIT: Should configure BULK EPs using double buffer feature"
bufno = stm32_epallocpma(priv);
if (bufno < 0)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_EPBUFFER), 0);
goto errout_with_ep;
}
privep->bufno = (ubyte)bufno;
return &privep->ep;
errout_with_ep:
stm32_epunreserve(priv, privep);
errout:
return NULL;
}
/****************************************************************************
* Name: stm32_freeep
****************************************************************************/
static void stm32_freeep(struct usbdev_s *dev, struct usbdev_ep_s *ep)
{
struct stm32_usbdev_s *priv;
struct stm32_ep_s *privep;
#ifdef CONFIG_DEBUG
if (!dev || !ep)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_INVALIDPARMS), 0);
return;
}
#endif
priv = (struct stm32_usbdev_s *)dev;
privep = (struct stm32_ep_s *)ep;
usbtrace(TRACE_DEVFREEEP, (uint16)USB_EPNO(ep->eplog));
if (priv && privep)
{
/* Free the PMA buffer assigned to this endpoint */
stm32_epfreepma(priv, privep);
/* Mark the endpoint as available */
stm32_epunreserve(priv, privep);
}
}
/****************************************************************************
* Name: stm32_getframe
****************************************************************************/
static int stm32_getframe(struct usbdev_s *dev)
{
uint16 fnr;
#ifdef CONFIG_DEBUG
if (!dev)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_INVALIDPARMS), 0);
return -EINVAL;
}
#endif
/* Return the last frame number detected by the hardware */
fnr = stm32_getreg(STM32_USB_FNR);
usbtrace(TRACE_DEVGETFRAME, fnr);
return (fnr & USB_FNR_FN_MASK);
}
/****************************************************************************
* Name: stm32_wakeup
****************************************************************************/
static int stm32_wakeup(struct usbdev_s *dev)
{
struct stm32_usbdev_s *priv = (struct stm32_usbdev_s *)dev;
irqstate_t flags;
usbtrace(TRACE_DEVWAKEUP, 0);
#ifdef CONFIG_DEBUG
if (!dev)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_INVALIDPARMS), 0);
return -EINVAL;
}
#endif
/* Start the resume sequence. The actual resume steps will be driven
* by the ESOF interrupt.
*/
flags = irqsave();
stm32_initresume(priv);
priv->rsmstate = RSMSTATE_STARTED;
/* Disable the SUSP interrupt (until we are fully resumed), disable
* the WKUP interrupt (we are already waking up), and enable the
* ESOF interrupt that will drive the resume operations. Clear any
* pending ESOF interrupt.
*/
stm32_setimask(priv, USB_CNTR_ESOFM, USB_CNTR_WKUPM|USB_CNTR_SUSPM);
stm32_putreg(~USB_ISTR_ESOF, STM32_USB_ISTR);
irqrestore(flags);
return OK;
}
/****************************************************************************
* Name: stm32_selfpowered
****************************************************************************/
static int stm32_selfpowered(struct usbdev_s *dev, boolean selfpowered)
{
struct stm32_usbdev_s *priv = (struct stm32_usbdev_s *)dev;
usbtrace(TRACE_DEVSELFPOWERED, (uint16)selfpowered);
#ifdef CONFIG_DEBUG
if (!dev)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_INVALIDPARMS), 0);
return -ENODEV;
}
#endif
priv->selfpowered = selfpowered;
return OK;
}
/****************************************************************************
* Initialization/Reset
****************************************************************************/
/****************************************************************************
* Name: stm32_reset
****************************************************************************/
static void stm32_reset(struct stm32_usbdev_s *priv)
{
int epno;
/* Put the USB controller in reset, disable all interrupts */
stm32_putreg(USB_CNTR_FRES, STM32_USB_CNTR);
/* Reset the device state structure */
priv->devstate = DEVSTATE_IDLE;
priv->rsmstate = RSMSTATE_IDLE;
priv->rxpending = FALSE;
/* Reset endpoints */
for (epno = 0; epno < STM32_NENDPOINTS; epno++)
{
struct stm32_ep_s *privep = &priv->eplist[epno];
/* Cancel any queue requests */
stm32_cancelrequests(privep);
/* Reset endpoint status */
privep->stalled = FALSE;
privep->halted = FALSE;
privep->txbusy = FALSE;
privep->txnullpkt = FALSE;
}
/* Re-configure the USB controller in its initial, unconnected state */
stm32_hwreset(priv);
priv->usbdev.speed = USB_SPEED_FULL;
}
/****************************************************************************
* Name: stm32_hwreset
****************************************************************************/
static void stm32_hwreset(struct stm32_usbdev_s *priv)
{
/* Put the USB controller into reset, clear all interrupt enables */
stm32_putreg(USB_CNTR_FRES, STM32_USB_CNTR);
/* Disable interrupts (and perhaps take the USB controller out of reset) */
priv->imask = 0;
stm32_putreg(priv->imask, STM32_USB_CNTR);
/* Set the STM32 BTABLE address */
stm32_putreg(STM32_BTABLE_ADDRESS & 0xfff8, STM32_USB_BTABLE);
/* Initialize EP0 */
stm32_seteptype(EP0, USB_EPR_EPTYPE_CONTROL);
stm32_seteptxstatus(EP0, USB_EPR_STATTX_NAK);
stm32_seteprxaddr(EP0, STM32_EP0_RXADDR);
stm32_seteprxcount(EP0, STM32_EP0MAXPACKET);
stm32_seteptxaddr(EP0, STM32_EP0_TXADDR);
stm32_clrstatusout(EP0);
stm32_seteprxstatus(EP0, USB_EPR_STATRX_VALID);
/* Set the device to respond on default address */
stm32_setdevaddr(priv, 0);
/* Clear any pending interrupts */
stm32_putreg(0, STM32_USB_ISTR);
/* Enable interrupts at the USB controller */
stm32_setimask(priv, STM32_CNTR_SETUP, (USB_CNTR_ALLINTS & ~STM32_CNTR_SETUP));
stm32_dumpep(EP0);
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_usbinitialize
* Description:
* Initialize the USB driver
* Input Parameters:
* None
*
* Returned Value:
* None
*
****************************************************************************/
void up_usbinitialize(void)
{
/* For now there is only one USB controller, but we will always refer to
* it using a pointer to make any future ports to multiple USB controllers
* easier.
*/
struct stm32_usbdev_s *priv = &g_usbdev;
int epno;
usbtrace(TRACE_DEVINIT, 0);
stm32_checksetup();
/* Power the USB controller, put the USB controller into reset, disable
* all USB interrupts
*/
stm32_putreg(USB_CNTR_FRES|USB_CNTR_PDWN, STM32_USB_CNTR);
/* Disconnect the device / disable the pull-up. We don't want the
* host to enumerate us until the class driver is registered.
*/
stm32_usbpullup(&priv->usbdev, FALSE);
/* Initialize the device state structure. NOTE: many fields
* have the initial value of zero and, hence, are not explicitly
* initialized here.
*/
memset(priv, 0, sizeof(struct stm32_usbdev_s));
priv->usbdev.ops = &g_devops;
priv->usbdev.ep0 = &priv->eplist[EP0].ep;
priv->epavail = STM32_ENDP_ALLSET & ~STM32_ENDP_BIT(EP0);
priv->bufavail = STM32_BUFFER_ALLSET & ~STM32_BUFFER_EP0;
/* Initialize the endpoint list */
for (epno = 0; epno < STM32_NENDPOINTS; epno++)
{
/* Set endpoint operations, reference to driver structure (not
* really necessary because there is only one controller), and
* the (physical) endpoint number which is just the index to the
* endpoint.
*/
priv->eplist[epno].ep.ops = &g_epops;
priv->eplist[epno].dev = priv;
priv->eplist[epno].ep.eplog = epno;
/* We will use a fixed maxpacket size for all endpoints (perhaps
* ISOC endpoints could have larger maxpacket???). A smaller
* packet size can be selected when the endpoint is configured.
*/
priv->eplist[epno].ep.maxpacket = STM32_MAXPACKET_SIZE;
}
/* Select a smaller endpoint size for EP0 */
#if STM32_EP0MAXPACKET < STM32_MAXPACKET_SIZE
priv->eplist[EP0].ep.maxpacket = STM32_EP0MAXPACKET;
#endif
/* Configure the USB controller. USB uses the following GPIO pins:
*
* PA9 - VBUS
* PA10 - ID
* PA11 - DM
* PA12 - DP
*
* "As soon as the USB is enabled, these pins [DM and DP] are connected to
* the USB internal transceiver automatically."
*/
/* Power up the USB controller, holding it in reset. There is a delay of
* about 1uS after applying power before the USB will behave predictably.
* A 5MS delay is more than enough. NOTE that we leave the USB controller
* in the reset state; the hardware will not be initialized until the
* class driver has been bound.
*/
stm32_putreg(USB_CNTR_FRES, STM32_USB_CNTR);
up_mdelay(5);
/* Attach USB controller interrupt handlers. The hardware will not be
* initialized and interrupts will not be enabled until the class device
* driver is bound. Getting the IRQs here only makes sure that we have
* them when we need them later.
*/
if (irq_attach(STM32_IRQ_USBHPCANTX, stm32_hpinterrupt) != 0)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_IRQREGISTRATION),
(uint16)STM32_IRQ_USBHPCANTX);
goto errout;
}
if (irq_attach(STM32_IRQ_USBLPCANRX0, stm32_lpinterrupt) != 0)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_IRQREGISTRATION),
(uint16)STM32_IRQ_USBLPCANRX0);
goto errout;
}
return;
errout:
up_usbuninitialize();
}
/****************************************************************************
* Name: up_usbuninitialize
* Description:
* Initialize the USB driver
* Input Parameters:
* None
*
* Returned Value:
* None
*
****************************************************************************/
void up_usbuninitialize(void)
{
/* For now there is only one USB controller, but we will always refer to
* it using a pointer to make any future ports to multiple USB controllers
* easier.
*/
struct stm32_usbdev_s *priv = &g_usbdev;
uint16 regval;
irqstate_t flags;
usbtrace(TRACE_DEVUNINIT, 0);
if (priv->driver)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_DRIVERREGISTERED), 0);
usbdev_unregister(priv->driver);
}
flags = irqsave();
priv->usbdev.speed = USB_SPEED_UNKNOWN;
/* Disable and detach IRQs */
up_disable_irq(STM32_IRQ_USBHPCANTX);
up_disable_irq(STM32_IRQ_USBLPCANRX0);
irq_detach(STM32_IRQ_USBHPCANTX);
irq_detach(STM32_IRQ_USBLPCANRX0);
/* Disable all interrupts and force the USB controller into reset */
stm32_putreg(USB_CNTR_FRES, STM32_USB_CNTR);
/* Clear any pending interrupts */
stm32_putreg(0, STM32_USB_ISTR);
/* Disconnect the device / disable the pull-up */
stm32_usbpullup(&priv->usbdev, FALSE);
/* Power down the USB controller */
stm32_putreg(USB_CNTR_FRES|USB_CNTR_PDWN, STM32_USB_CNTR);
irqrestore(flags);
}
/****************************************************************************
* Name: usbdev_register
*
* Description:
* Register a USB device class driver. The class driver's bind() method will be
* called to bind it to a USB device driver.
*
****************************************************************************/
int usbdev_register(struct usbdevclass_driver_s *driver)
{
/* For now there is only one USB controller, but we will always refer to
* it using a pointer to make any future ports to multiple USB controllers
* easier.
*/
struct stm32_usbdev_s *priv = &g_usbdev;
int ret;
usbtrace(TRACE_DEVREGISTER, 0);
#ifdef CONFIG_DEBUG
if (!driver || !driver->ops->bind || !driver->ops->unbind ||
!driver->ops->disconnect || !driver->ops->setup)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_INVALIDPARMS), 0);
return -EINVAL;
}
if (priv->driver)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_DRIVER), 0);
return -EBUSY;
}
#endif
/* First hook up the driver */
priv->driver = driver;
/* Then bind the class driver */
ret = CLASS_BIND(driver, &priv->usbdev);
if (ret)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_BINDFAILED), (uint16)-ret);
priv->driver = NULL;
}
else
{
/* Setup the USB controller -- enabling interrupts at the USB controller */
stm32_hwreset(priv);
/* Enable USB controller interrupts at the NVIC */
up_enable_irq(STM32_IRQ_USBHPCANTX);
up_enable_irq(STM32_IRQ_USBLPCANRX0);
/* Set the interrrupt priority */
up_prioritize_irq(STM32_IRQ_USBHPCANTX, CONFIG_USB_PRI);
up_prioritize_irq(STM32_IRQ_USBLPCANRX0, CONFIG_USB_PRI);
/* Enable pull-up to connect the device. The host should enumerate us
* some time after this
*/
stm32_usbpullup(&priv->usbdev, TRUE);
priv->usbdev.speed = USB_SPEED_FULL;
}
return ret;
}
/****************************************************************************
* Name: usbdev_unregister
*
* Description:
* Un-register usbdev class driver.If the USB device is connected to a USB host,
* it will first disconnect(). The driver is also requested to unbind() and clean
* up any device state, before this procedure finally returns.
*
****************************************************************************/
int usbdev_unregister(struct usbdevclass_driver_s *driver)
{
/* For now there is only one USB controller, but we will always refer to
* it using a pointer to make any future ports to multiple USB controllers
* easier.
*/
struct stm32_usbdev_s *priv = &g_usbdev;
usbtrace(TRACE_DEVUNREGISTER, 0);
#ifdef CONFIG_DEBUG
if (driver != priv->driver)
{
usbtrace(TRACE_DEVERROR(STM32_TRACEERR_INVALIDPARMS), 0);
return -EINVAL;
}
#endif
/* Unbind the class driver */
CLASS_UNBIND(driver, &priv->usbdev);
/* Disable USB controller interrupts */
up_disable_irq(STM32_IRQ_USBHPCANTX);
up_disable_irq(STM32_IRQ_USBLPCANRX0);
/* Unhook the driver */
priv->driver = NULL;
return OK;
}
#endif /* CONFIG_USBDEV && CONFIG_STM32_USB */
|