1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
|
#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#
if ARCH_SIM
comment "Simulation Configuration Options"
config SIM_M32
bool "Build 32-bit simulation on 64-bit machine"
default n
---help---
Simulation context switching is based on logic like setjmp and longjmp. This
context switching is only available for 32-bit targets. On 64-bit machines,
this context switching will fail.
The workaround on 64-bit machines for now is to build for a 32-bit target on the
64-bit machine. The workaround for this issue has been included in NuttX 6.15 and
beyond. For thoses versions, you must add SIM_M32=y to the .config file in
order to enable building a 32-bit image on a 64-bit platform.
config SIM_WALLTIME
bool "Execution simulation in near real-time"
default n
---help---
NOTE: In order to facility fast testing, the sim target's IDLE loop, by default,
calls the system timer "interrupt handler" as fast as possible. As a result, there
really are no noticeable delays when a task sleeps. However, the task really does
sleep -- but the time scale is wrong. If you want behavior that is closer to
normal timing, then you can define CONFIG_SIM_WALLTIME=y in your configuration
file. This configuration setting will cause the sim target's IDLE loop to delay
on each call so that the system "timer interrupt" is called at a rate approximately
correct for the system timer tick rate. With this definition in the configuration,
sleep() behavior is more or less normal.
config SIM_LCDDRIVER
bool "Build a simulated LCD driver"
default y
depends on NX && NX_LCDDRIVER
---help---
Build a simulated LCD driver"
config SIM_FRAMEBUFFER
bool "Build a simulated frame buffer driver"
default y
depends on NX && !NX_LCDDRIVER
---help---
Build a simulated frame buffer driver"
config SIM_X11FB
bool "Use X11 window"
default n
depends on NX && FB_CMAP
---help---
Use an X11 graphics window to simulate the graphics device"
config SIM_X11NOSHM
bool "Don't use shared memory with X11"
default n
depends on SIM_X11FB
---help---
Don't use shared memory with the X11 graphics device emulation."
config SIM_FBHEIGHT
int "Display height"
default 240
depends on NX
---help---
Simulated display height. Default: 240
config SIM_FBWIDTH
int "Display width"
default 320 if SIM_LCDDRIVER
default 480 if SIM_FRAMEBUFFER
depends on NX
---help---
Simulated width of the display. Default: 320 or 480
config SIM_FBBPP
int "Pixel depth in bits"
default 8
depends on NX
---help---
Pixel depth in bits. Valid choices are 4, 8, 16, 24, or 32.
If you use the X11 display emulation, the selected BPP must match the BPP
of your graphics hardware (probably 32 bits). Default: 8
config SIM_TOUCHSCREEN
bool "Support an X11 mouse-based touchscreen emulation"
default n
depends on SIM_X11FB && INPUT
---help---
Support an X11 mouse-based touchscreen emulation. Also needs INPUT=y
config SIM_TCNWAITERS
bool "Maximum number poll() waiters"
default 4
depends on !POLL_DISABLE && SIM_TOUCHSCREEN
---help---
The maximum number of threads that can be waiting on poll() for a touchscreen event.
Default: 4
endif
|