1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
|
/************************************************************************************
* configs/fire-stm32v2/src/up_selectlcd.c
* arch/arm/src/board/up_selectlcd.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <assert.h>
#include <debug.h>
#include <arch/board/board.h>
#include "chip.h"
#include "up_arch.h"
#include "stm32_fsmc.h"
#include "stm32_gpio.h"
#include "stm32.h"
#include "fire-internal.h"
#ifdef CONFIG_STM32_FSMC
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
#ifndef CONFIG_STM32_FSMC
# warning "FSMC is not enabled"
#endif
#if STM32_NGPIO_PORTS < 6
# error "Required GPIO ports not enabled"
#endif
/************************************************************************************
* Public Data
************************************************************************************/
/* 2.4" TFT + Touchscreen. FSMC Bank1
*
* --- ------ -------------- -------------------------------------------------------------------
* PIN NAME SIGNAL NOTES
* --- ------ -------------- -------------------------------------------------------------------
*
* 30 PA5 PA5-SPI1-SCK 2.4" TFT + Touchscreen, 10Mbit ENC28J60, SPI 2M FLASH
* 31 PA6 PA6-SPI1-MISO 2.4" TFT + Touchscreen, 10Mbit ENC28J60, SPI 2M FLASH
* 32 PA7 PA7-SPI1-MOSI 2.4" TFT + Touchscreen, 10Mbit ENC28J60, SPI 2M FLASH
* 92 PB6 PB6-I2C1-SCL 2.4" TFT + Touchscreen, AT24C02
* 93 PB7 PB7-I2C1-SDA 2.4" TFT + Touchscreen, AT24C02
* 81 PD0 PD0-FSMC_D2 2.4" TFT + Touchscreen
* 82 PD1 PD1-FSMC_D3 2.4" TFT + Touchscreen
* 85 PD4 PD4-FSMC_NOE 2.4" TFT + Touchscreen
* 86 PD5 PD5-FSMC_NWE 2.4" TFT + Touchscreen
* 88 PD7 PD7-FSMC_NE1 2.4" TFT + Touchscreen
* 55 PD8 PD8-FSMC_D13 2.4" TFT + Touchscreen
* 56 PD9 PD9-FSMC_D14 2.4" TFT + Touchscreen
* 57 PD10 PD10-FSMC_D15 2.4" TFT + Touchscreen
* 58 PD11 PD11-FSMC_A16 2.4" TFT + Touchscreen
* 60 PD13 PD13-LCD/LIGHT 2.4" TFT + Touchscreen
* 61 PD14 PD14-FSMC_D0 2.4" TFT + Touchscreen
* 62 PD15 PD15-FSMC_D1 2.4" TFT + Touchscreen
* 98 PE1 PE1-FSMC_NBL1 2.4" TFT + Touchscreen
* 38 PE7 PE7-FSMC_D4 2.4" TFT + Touchscreen
* 39 PE8 PE8-FSMC_D5 2.4" TFT + Touchscreen
* 40 PE9 PE9-FSMC_D6 2.4" TFT + Touchscreen
* 41 PE10 PE10-FSMC_D7 2.4" TFT + Touchscreen
* 42 PE11 PE11-FSMC_D8 2.4" TFT + Touchscreen
* 43 PE12 PE12-FSMC_D9 2.4" TFT + Touchscreen
* 44 PE13 PE13-FSMC_D10 2.4" TFT + Touchscreen
* 45 PE14 PE14-FSMC_D11 2.4" TFT + Touchscreen
* 46 PE15 PE15-FSMC_D12 2.4" TFT + Touchscreen
*
* NOTE: SPI and I2C pin configuration is controlled in the SPI and I2C drivers, respectively.
*/
static const uint16_t g_lcdconfig[NCOMMON_CONFIG] =
{
/* Address Lines: A16 only */
GPIO_NPS_A16,
/* Data Lines: D0... D15 */
GPIO_NPS_D0, GPIO_NPS_D1, GPIO_NPS_D2, GPIO_NPS_D3,
GPIO_NPS_D4, GPIO_NPS_D5, GPIO_NPS_D6, GPIO_NPS_D7,
GPIO_NPS_D8, GPIO_NPS_D9, GPIO_NPS_D10, GPIO_NPS_D11,
GPIO_NPS_D12, GPIO_NPS_D13, GPIO_NPS_D14, GPIO_NPS_D15,
/* NOE, NWE, NE1, NBL1 */
GPIO_NPS_NOE, GPIO_NPS_NWE, GPIO_NPS_NE1, GPIO_NPS_NBL1,
/* Backlight GPIO */
GPIO_LCD_BACKLIGHT
};
#define NLCD_CONFIG (sizeof(g_lcdconfig) / sizeof(uint16_t))
/************************************************************************************
* Private Data
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_enablefsmc
*
* Description:
* Enable clocking to the FSMC module
*
************************************************************************************/
static inline void stm32_enablefsmc(void)
{
uint32_t regval;
/* Enable AHB clocking to the FSMC */
regval = getreg32( STM32_RCC_AHBENR);
regval |= RCC_AHBENR_FSMCEN;
putreg32(regval, STM32_RCC_AHBENR);
}
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_selectlcd
*
* Description:
* Initialize to the LCD pin configuration.
*
************************************************************************************/
void stm32_selectlcd(void)
{
irqstate_t flags;
int i;
/* Configure LCD GPIO pis */
flags = irqsave();
for (i = 0; i < NLCD_GPIOS; i++)
{
stm32_configgpio(g_lcdconfig[i]);
}
/* Enable AHB clocking to the FSMC */
stm32_enablefsmc();
/* Bank1 NOR/SRAM control register configuration */
putreg32(FSMC_BCR_SRAM | FSMC_BCR_MWID16 | FSMC_BCR_WREN, STM32_FSMC_BCR1);
/* Bank1 NOR/SRAM timing register configuration */
putreg32(FSMC_BTR_ADDSET(1)|FSMC_BTR_ADDHLD(0)|FSMC_BTR_DATAST(2)|FSMC_BTR_BUSTRUN(0)|
FSMC_BTR_CLKDIV(0)|FSMC_BTR_DATLAT(0)|FSMC_BTR_ACCMODA, STM32_FSMC_BTR1);
putreg32(0xffffffff, STM32_FSMC_BWTR4);
/* Enable the bank by setting the MBKEN bit */
putreg32(FSMC_BCR_MBKEN | FSMC_BCR_SRAM | FSMC_BCR_MWID16 | FSMC_BCR_WREN, STM32_FSMC_BCR1);
irqrestore(flags);
}
#endif /* CONFIG_STM32_FSMC */
|