blob: ece900669ad54f6df99edd4942079dde932bfd9b (
plain) (
blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
|
# Daemon configuration
telnet_port 4444
gdb_port 3333
# Interface - Wiggler-Type JTAG-device (see /usr/local/lib/openocd/interface/parport.cfg)
interface parport
parport_port 0x378
parport_cable wiggler
jtag_speed 0
jtag_nsrst_delay 20
jtag_ntrst_delay 20
# Start the OpenOCD daemon and reset the processor
init
reset halt
# (See /usr/local/lib/openocd/target/str710.cfg)
# Start slow, speed up after reset
jtag_khz 10
# Use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst srst_pulls_trst
# Jtag scan chain
# format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 4 0x1 0xf 0xe
# target <type> <startup mode>
# target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
target arm7tdmi little 0 arm7tdmi
[new_target_name] configure -event reset-start { jtag_khz 10 }
[new_target_name] configure -event reset-init { jtag_khz 6000 }
[new_target_name] configure -event old-gdb_program_config { script event/str710_program.script }
target_script 0 reset oocd_flash.script
# Flash-configuration STR710FZ2/STR711FR2:
# internal flash at address 0x40000000 size 256kB (0x40000)
# internal ram at address 0x20000000 size 64kB (0x10000)
# a 16kB working area inside RAM:
working_area 0 0x2000C000 0x4000 nobackup
# Flash bank str7x <base> <size> 0 0 <target#> <variant>
flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x
flash bank str7x 0x400C0000 0x00004000 0 0 0 STR71x
|
