Cleanup and refactor of the PX4IO firmware and board support. Builds, not tested yet.

6 files changed, 365 insertions, 1 deletions

diff --git a/apps/drivers/boards/px4fmu/Makefile b/apps/drivers/boards/px4fmu/Makefile
index 393e96e32..6b183d8d2 100644
--- a/apps/drivers/boards/px4fmu/Makefile
+++ b/apps/drivers/boards/px4fmu/Makefile
@@ -36,5 +36,6 @@
 #
 
 INCLUDES	 = $(TOPDIR)/arch/arm/src/stm32 $(TOPDIR)/arch/arm/src/common
+LIBNAME		 = brd_px4fmu
 
 include $(APPDIR)/mk/app.mk
diff --git a/apps/drivers/boards/px4fmu/px4fmu_init.c b/apps/drivers/boards/px4fmu/px4fmu_init.c
index 568d861c9..57ffb77d3 100644
--- a/apps/drivers/boards/px4fmu/px4fmu_init.c
+++ b/apps/drivers/boards/px4fmu/px4fmu_init.c
@@ -57,7 +57,6 @@
 #include <nuttx/i2c.h>
 #include <nuttx/mmcsd.h>
 #include <nuttx/analog/adc.h>
-#include <nuttx/arch.h>
 
 #include "stm32_internal.h"
 #include "px4fmu_internal.h"
diff --git a/apps/drivers/boards/px4io/Makefile b/apps/drivers/boards/px4io/Makefile
new file mode 100644
index 000000000..85806fe6f
--- /dev/null
+++ b/apps/drivers/boards/px4io/Makefile
@@ -0,0 +1,41 @@
+############################################################################
+#
+#   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+#
+# Board-specific startup code for the PX4IO
+#
+
+INCLUDES	 = $(TOPDIR)/arch/arm/src/stm32 $(TOPDIR)/arch/arm/src/common
+LIBNAME		 = brd_px4io
+
+include $(APPDIR)/mk/app.mk
diff --git a/apps/drivers/boards/px4io/px4io_init.c b/apps/drivers/boards/px4io/px4io_init.c
new file mode 100644
index 000000000..dc2e11c30
--- /dev/null
+++ b/apps/drivers/boards/px4io/px4io_init.c
@@ -0,0 +1,100 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file px4io_init.c
+ *
+ * PX4IO-specific early startup code.  This file implements the
+ * nsh_archinitialize() function that is called early by nsh during startup.
+ *
+ * Code here is run before the rcS script is invoked; it should start required
+ * subsystems and perform board-specific initialisation.
+ */
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <nuttx/arch.h>
+
+#include "stm32_internal.h"
+#include "px4io_internal.h"
+#include "stm32_uart.h"
+
+#include <arch/board/board.h>
+
+#include <drivers/drv_hrt.h>
+#include <drivers/drv_led.h>
+#include <drivers/drv_pwm_output.h>
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the intitialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_boardinitialize(void)
+{
+	/* configure the high-resolution time/callout interface */
+#ifdef CONFIG_HRT_TIMER
+	hrt_init();
+#endif
+
+	/* configure GPIOs */
+	stm32_configgpio(GPIO_ACC1_PWR_EN);
+	stm32_configgpio(GPIO_ACC2_PWR_EN);
+	stm32_configgpio(GPIO_SERVO_PWR_EN);
+	stm32_configgpio(GPIO_RELAY1_EN);
+	stm32_configgpio(GPIO_RELAY2_EN);
+	stm32_configgpio(GPIO_LED1);
+	stm32_configgpio(GPIO_LED2);
+	stm32_configgpio(GPIO_LED3);
+	stm32_configgpio(GPIO_ACC_OC_DETECT);
+	stm32_configgpio(GPIO_SERVO_OC_DETECT);
+	stm32_configgpio(GPIO_BTN_SAFETY);
+}
diff --git a/apps/drivers/boards/px4io/px4io_internal.h b/apps/drivers/boards/px4io/px4io_internal.h
new file mode 100644
index 000000000..a0342ac8a
--- /dev/null
+++ b/apps/drivers/boards/px4io/px4io_internal.h
@@ -0,0 +1,100 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+ 
+/**
+ * @file PX4IO hardware definitions.
+ */
+
+#pragma once
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/compiler.h>
+#include <stdint.h>
+
+#include <stm32_internal.h>
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* PX4IO GPIOs **********************************************************************/
+/* LEDs */
+
+#define GPIO_LED1       (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
+                         GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN14)
+#define GPIO_LED2       (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
+                         GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN15)
+#define GPIO_LED3       (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
+                         GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN10)
+
+/* R/C in/out channels **************************************************************/
+
+/* XXX just GPIOs for now - eventually timer pins */
+
+#define GPIO_CH1_IN     (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTA|GPIO_PIN0)
+#define GPIO_CH2_IN     (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTA|GPIO_PIN1)
+#define GPIO_CH3_IN     (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTB|GPIO_PIN8)
+#define GPIO_CH4_IN     (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTB|GPIO_PIN9)
+#define GPIO_CH5_IN     (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTA|GPIO_PIN6)
+#define GPIO_CH6_IN     (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTA|GPIO_PIN7)
+#define GPIO_CH7_IN     (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTB|GPIO_PIN0)
+#define GPIO_CH8_IN     (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTB|GPIO_PIN1)
+
+#define GPIO_CH1_OUT    (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN0)
+#define GPIO_CH2_OUT    (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN1)
+#define GPIO_CH3_OUT    (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN8)
+#define GPIO_CH4_OUT    (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN9)
+#define GPIO_CH5_OUT    (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN6)
+#define GPIO_CH6_OUT    (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN7)
+#define GPIO_CH7_OUT    (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN0)
+#define GPIO_CH8_OUT    (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN1)
+
+/* Safety switch button *************************************************************/
+
+#define GPIO_BTN_SAFETY (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTB|GPIO_PIN5)
+
+/* Power switch controls ************************************************************/
+
+#define GPIO_ACC1_PWR_EN  (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN13)
+#define GPIO_ACC2_PWR_EN  (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN14)
+#define GPIO_SERVO_PWR_EN (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN15)
+
+#define GPIO_ACC_OC_DETECT   (GPIO_INPUT|GPIO_CNF_INPULLUP|GPIO_MODE_INPUT|GPIO_PORTB|GPIO_PIN12)
+#define GPIO_SERVO_OC_DETECT (GPIO_INPUT|GPIO_CNF_INPULLUP|GPIO_MODE_INPUT|GPIO_PORTB|GPIO_PIN13)
+
+#define GPIO_RELAY1_EN (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN13)
+#define GPIO_RELAY2_EN (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN12)
diff --git a/apps/drivers/boards/px4io/px4io_pwm_servo.c b/apps/drivers/boards/px4io/px4io_pwm_servo.c
new file mode 100644
index 000000000..a2f73c429
--- /dev/null
+++ b/apps/drivers/boards/px4io/px4io_pwm_servo.c
@@ -0,0 +1,123 @@
+/****************************************************************************
+ *
+ *  Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/*
+ * @file px4fmu_pwm_servo.c
+ *
+ * Configuration data for the stm32 pwm_servo driver.
+ *
+ * Note that these arrays must always be fully-sized.
+ */
+
+#include <stdint.h>
+
+#include <drivers/stm32/drv_pwm_servo.h>
+
+#include <arch/board/board.h>
+#include <drivers/drv_pwm_output.h>
+
+#include <stm32_internal.h>
+#include <stm32_gpio.h>
+#include <stm32_tim.h>
+
+__EXPORT const struct pwm_servo_timer pwm_timers[PWM_SERVO_MAX_TIMERS] = {
+	{
+		.base = STM32_TIM2_BASE,
+		.clock_register = STM32_RCC_APB1ENR,
+		.clock_bit = RCC_APB1ENR_TIM2EN,
+		.clock_freq = STM32_APB1_TIM2_CLKIN
+	},
+	{
+		.base = STM32_TIM3_BASE,
+		.clock_register = STM32_RCC_APB1ENR,
+		.clock_bit = RCC_APB1ENR_TIM3EN,
+		.clock_freq = STM32_APB1_TIM3_CLKIN
+	},
+	{
+		.base = STM32_TIM4_BASE,
+		.clock_register = STM32_RCC_APB1ENR,
+		.clock_bit = RCC_APB1ENR_TIM4EN,
+		.clock_freq = STM32_APB1_TIM4_CLKIN
+	}
+};
+
+__EXPORT const struct pwm_servo_channel pwm_channels[PWM_SERVO_MAX_CHANNELS] = {
+	{
+		.gpio = GPIO_TIM2_CH1OUT,
+		.timer_index = 0,
+		.timer_channel = 1,
+		.default_value = 1000,
+	},
+	{
+		.gpio = GPIO_TIM2_CH2OUT,
+		.timer_index = 0,
+		.timer_channel = 2,
+		.default_value = 1000,
+	},
+	{
+		.gpio = GPIO_TIM4_CH3OUT,
+		.timer_index = 2,
+		.timer_channel = 3,
+		.default_value = 1000,
+	},
+	{
+		.gpio = GPIO_TIM4_CH4OUT,
+		.timer_index = 2,
+		.timer_channel = 4,
+		.default_value = 1000,
+	},
+	{
+		.gpio = GPIO_TIM3_CH1OUT,
+		.timer_index = 1,
+		.timer_channel = 1,
+		.default_value = 1000,
+	},
+	{
+		.gpio = GPIO_TIM3_CH2OUT,
+		.timer_index = 1,
+		.timer_channel = 2,
+		.default_value = 1000,
+	},
+	{
+		.gpio = GPIO_TIM3_CH3OUT,
+		.timer_index = 1,
+		.timer_channel = 3,
+		.default_value = 1000,
+	},
+	{
+		.gpio = GPIO_TIM3_CH4OUT,
+		.timer_index = 1,
+		.timer_channel = 4,
+		.default_value = 1000,
+	}
+};