Fresh import of the PX4 firmware sources.

1 files changed, 142 insertions, 0 deletions

diff --git a/nuttx/configs/px4fmu/src/up_can.c b/nuttx/configs/px4fmu/src/up_can.c
new file mode 100644
index 000000000..daf6484f2
--- /dev/null
+++ b/nuttx/configs/px4fmu/src/up_can.c
@@ -0,0 +1,142 @@
+/************************************************************************************
+ * configs/px4fmu/src/up_can.c
+ * arch/arm/src/board/up_can.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/can.h>
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "up_arch.h"
+
+#include "stm32.h"
+#include "stm32_can.h"
+#include "px4fmu-internal.h"
+
+#if defined(CONFIG_CAN) && (defined(CONFIG_STM32_CAN1) || defined(CONFIG_STM32_CAN2))
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+/* Configuration ********************************************************************/
+
+#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
+#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
+#  undef CONFIG_STM32_CAN2
+#endif
+
+#ifdef CONFIG_STM32_CAN1
+#  define CAN_PORT 1
+#else
+#  define CAN_PORT 2
+#endif
+
+/* Debug ***************************************************************************/
+/* Non-standard debug that may be enabled just for testing CAN */
+
+#ifdef CONFIG_DEBUG_CAN
+#  define candbg    dbg
+#  define canvdbg   vdbg
+#  define canlldbg  lldbg
+#  define canllvdbg llvdbg
+#else
+#  define candbg(x...)
+#  define canvdbg(x...)
+#  define canlldbg(x...)
+#  define canllvdbg(x...)
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: can_devinit
+ *
+ * Description:
+ *   All STM32 architectures must provide the following interface to work with
+ *   examples/can.
+ *
+ ************************************************************************************/
+
+int can_devinit(void)
+{
+  static bool initialized = false;
+  struct can_dev_s *can;
+  int ret;
+
+  /* Check if we have already initialized */
+
+  if (!initialized)
+    {
+      /* Call stm32_caninitialize() to get an instance of the CAN interface */
+
+      can = stm32_caninitialize(CAN_PORT);
+      if (can == NULL)
+        {
+          candbg("ERROR:  Failed to get CAN interface\n");
+          return -ENODEV;
+        }
+
+      /* Register the CAN driver at "/dev/can0" */
+
+      ret = can_register("/dev/can0", can);
+      if (ret < 0)
+        {
+          candbg("ERROR: can_register failed: %d\n", ret);
+          return ret;
+        }
+
+      /* Now we are initialized */
+
+      initialized = true;
+    }
+
+  return OK;
+}
+
+#endif /* CONFIG_STM32_CAN || CONFIG_STM32_CAN2 || CONFIG_STM32_CAN3 */