diff options
-rw-r--r-- | src/drivers/blinkm/blinkm.cpp | 4 | ||||
-rw-r--r-- | src/modules/commander/accelerometer_calibration.cpp | 66 | ||||
-rw-r--r-- | src/modules/commander/airspeed_calibration.cpp | 6 | ||||
-rw-r--r-- | src/modules/commander/commander.cpp | 203 | ||||
-rw-r--r-- | src/modules/commander/commander_helper.cpp | 20 | ||||
-rw-r--r-- | src/modules/commander/commander_tests/state_machine_helper_test.cpp | 12 | ||||
-rw-r--r-- | src/modules/commander/gyro_calibration.cpp | 18 | ||||
-rw-r--r-- | src/modules/commander/mag_calibration.cpp | 31 | ||||
-rw-r--r-- | src/modules/commander/px4_custom_mode.h | 4 | ||||
-rw-r--r-- | src/modules/commander/state_machine_helper.cpp | 160 | ||||
-rw-r--r-- | src/modules/fixedwing_backside/fixedwing.cpp | 4 | ||||
-rw-r--r-- | src/modules/mavlink/mavlink_messages.cpp | 8 | ||||
-rw-r--r-- | src/modules/segway/BlockSegwayController.cpp | 4 | ||||
-rw-r--r-- | src/modules/sensors/sensor_params.c | 8 | ||||
-rw-r--r-- | src/modules/sensors/sensors.cpp | 138 | ||||
-rw-r--r-- | src/modules/uORB/topics/manual_control_setpoint.h | 4 | ||||
-rw-r--r-- | src/modules/uORB/topics/rc_channels.h | 2 | ||||
-rw-r--r-- | src/modules/uORB/topics/vehicle_status.h | 4 |
18 files changed, 408 insertions, 288 deletions
diff --git a/src/drivers/blinkm/blinkm.cpp b/src/drivers/blinkm/blinkm.cpp index 974e20ca2..c41d8f242 100644 --- a/src/drivers/blinkm/blinkm.cpp +++ b/src/drivers/blinkm/blinkm.cpp @@ -638,11 +638,11 @@ BlinkM::led() if(new_data_vehicle_control_mode || no_data_vehicle_control_mode < 3) { /* indicate main control state */ - if (vehicle_status_raw.main_state == MAIN_STATE_POSCTRL) + if (vehicle_status_raw.main_state == MAIN_STATE_POSCTL) led_color_4 = LED_GREEN; else if (vehicle_status_raw.main_state == MAIN_STATE_AUTO) led_color_4 = LED_BLUE; - else if (vehicle_status_raw.main_state == MAIN_STATE_ALTCTRL) + else if (vehicle_status_raw.main_state == MAIN_STATE_ALTCTL) led_color_4 = LED_YELLOW; else if (vehicle_status_raw.main_state == MAIN_STATE_MANUAL) led_color_4 = LED_WHITE; diff --git a/src/modules/commander/accelerometer_calibration.cpp b/src/modules/commander/accelerometer_calibration.cpp index 1cbdf9bf8..7180048ff 100644 --- a/src/modules/commander/accelerometer_calibration.cpp +++ b/src/modules/commander/accelerometer_calibration.cpp @@ -194,13 +194,13 @@ int do_accel_calibration(int mavlink_fd) int32_t board_rotation_int; param_get(board_rotation_h, &(board_rotation_int)); enum Rotation board_rotation_id = (enum Rotation)board_rotation_int; - math::Matrix<3,3> board_rotation; + math::Matrix<3, 3> board_rotation; get_rot_matrix(board_rotation_id, &board_rotation); - math::Matrix<3,3> board_rotation_t = board_rotation.transposed(); + math::Matrix<3, 3> board_rotation_t = board_rotation.transposed(); math::Vector<3> accel_offs_vec(&accel_offs[0]); - math::Vector<3> accel_offs_rotated = board_rotation_t * accel_offs_vec; - math::Matrix<3,3> accel_T_mat(&accel_T[0][0]); - math::Matrix<3,3> accel_T_rotated = board_rotation_t * accel_T_mat * board_rotation; + math::Vector<3> accel_offs_rotated = board_rotation_t *accel_offs_vec; + math::Matrix<3, 3> accel_T_mat(&accel_T[0][0]); + math::Matrix<3, 3> accel_T_rotated = board_rotation_t *accel_T_mat * board_rotation; accel_scale.x_offset = accel_offs_rotated(0); accel_scale.x_scale = accel_T_rotated(0, 0); @@ -277,11 +277,13 @@ int do_accel_calibration_measurements(int mavlink_fd, float accel_offs[3], float } } - if (old_done_count != done_count) + if (old_done_count != done_count) { mavlink_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 17 * done_count); + } - if (done) + if (done) { break; + } mavlink_log_info(mavlink_fd, "directions left: %s%s%s%s%s%s", (!data_collected[0]) ? "x+ " : "", @@ -380,11 +382,13 @@ int detect_orientation(int mavlink_fd, int sub_sensor_combined) d = d * d; accel_disp[i] = accel_disp[i] * (1.0f - w); - if (d > still_thr2 * 8.0f) + if (d > still_thr2 * 8.0f) { d = still_thr2 * 8.0f; + } - if (d > accel_disp[i]) + if (d > accel_disp[i]) { accel_disp[i] = d; + } } /* still detector with hysteresis */ @@ -432,33 +436,39 @@ int detect_orientation(int mavlink_fd, int sub_sensor_combined) if (fabsf(accel_ema[0] - CONSTANTS_ONE_G) < accel_err_thr && fabsf(accel_ema[1]) < accel_err_thr && - fabsf(accel_ema[2]) < accel_err_thr) - return 0; // [ g, 0, 0 ] + fabsf(accel_ema[2]) < accel_err_thr) { + return 0; // [ g, 0, 0 ] + } if (fabsf(accel_ema[0] + CONSTANTS_ONE_G) < accel_err_thr && fabsf(accel_ema[1]) < accel_err_thr && - fabsf(accel_ema[2]) < accel_err_thr) - return 1; // [ -g, 0, 0 ] + fabsf(accel_ema[2]) < accel_err_thr) { + return 1; // [ -g, 0, 0 ] + } if (fabsf(accel_ema[0]) < accel_err_thr && fabsf(accel_ema[1] - CONSTANTS_ONE_G) < accel_err_thr && - fabsf(accel_ema[2]) < accel_err_thr) - return 2; // [ 0, g, 0 ] + fabsf(accel_ema[2]) < accel_err_thr) { + return 2; // [ 0, g, 0 ] + } if (fabsf(accel_ema[0]) < accel_err_thr && fabsf(accel_ema[1] + CONSTANTS_ONE_G) < accel_err_thr && - fabsf(accel_ema[2]) < accel_err_thr) - return 3; // [ 0, -g, 0 ] + fabsf(accel_ema[2]) < accel_err_thr) { + return 3; // [ 0, -g, 0 ] + } if (fabsf(accel_ema[0]) < accel_err_thr && fabsf(accel_ema[1]) < accel_err_thr && - fabsf(accel_ema[2] - CONSTANTS_ONE_G) < accel_err_thr) - return 4; // [ 0, 0, g ] + fabsf(accel_ema[2] - CONSTANTS_ONE_G) < accel_err_thr) { + return 4; // [ 0, 0, g ] + } if (fabsf(accel_ema[0]) < accel_err_thr && fabsf(accel_ema[1]) < accel_err_thr && - fabsf(accel_ema[2] + CONSTANTS_ONE_G) < accel_err_thr) - return 5; // [ 0, 0, -g ] + fabsf(accel_ema[2] + CONSTANTS_ONE_G) < accel_err_thr) { + return 5; // [ 0, 0, -g ] + } mavlink_log_critical(mavlink_fd, "ERROR: invalid orientation"); @@ -485,8 +495,9 @@ int read_accelerometer_avg(int sensor_combined_sub, float accel_avg[3], int samp struct sensor_combined_s sensor; orb_copy(ORB_ID(sensor_combined), sensor_combined_sub, &sensor); - for (int i = 0; i < 3; i++) + for (int i = 0; i < 3; i++) { accel_sum[i] += sensor.accelerometer_m_s2[i]; + } count++; @@ -495,8 +506,9 @@ int read_accelerometer_avg(int sensor_combined_sub, float accel_avg[3], int samp continue; } - if (errcount > samples_num / 10) + if (errcount > samples_num / 10) { return ERROR; + } } for (int i = 0; i < 3; i++) { @@ -512,8 +524,9 @@ int mat_invert3(float src[3][3], float dst[3][3]) src[0][1] * (src[1][0] * src[2][2] - src[1][2] * src[2][0]) + src[0][2] * (src[1][0] * src[2][1] - src[1][1] * src[2][0]); - if (det == 0.0f) - return ERROR; // Singular matrix + if (det == 0.0f) { + return ERROR; // Singular matrix + } dst[0][0] = (src[1][1] * src[2][2] - src[1][2] * src[2][1]) / det; dst[1][0] = (src[1][2] * src[2][0] - src[1][0] * src[2][2]) / det; @@ -549,8 +562,9 @@ int calculate_calibration_values(float accel_ref[6][3], float accel_T[3][3], flo /* calculate inverse matrix for A */ float mat_A_inv[3][3]; - if (mat_invert3(mat_A, mat_A_inv) != OK) + if (mat_invert3(mat_A, mat_A_inv) != OK) { return ERROR; + } /* copy results to accel_T */ for (int i = 0; i < 3; i++) { diff --git a/src/modules/commander/airspeed_calibration.cpp b/src/modules/commander/airspeed_calibration.cpp index c8c7a42e7..5d21d89d0 100644 --- a/src/modules/commander/airspeed_calibration.cpp +++ b/src/modules/commander/airspeed_calibration.cpp @@ -82,12 +82,15 @@ int do_airspeed_calibration(int mavlink_fd) bool paramreset_successful = false; int fd = open(AIRSPEED_DEVICE_PATH, 0); + if (fd > 0) { if (OK == ioctl(fd, AIRSPEEDIOCSSCALE, (long unsigned int)&airscale)) { paramreset_successful = true; + } else { mavlink_log_critical(mavlink_fd, "airspeed offset zero failed"); } + close(fd); } @@ -112,8 +115,9 @@ int do_airspeed_calibration(int mavlink_fd) diff_pres_offset += diff_pres.differential_pressure_raw_pa; calibration_counter++; - if (calibration_counter % (calibration_count / 20) == 0) + if (calibration_counter % (calibration_count / 20) == 0) { mavlink_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, (calibration_counter * 100) / calibration_count); + } } else if (poll_ret == 0) { /* any poll failure for 1s is a reason to abort */ diff --git a/src/modules/commander/commander.cpp b/src/modules/commander/commander.cpp index e5124a31f..612393bc1 100644 --- a/src/modules/commander/commander.cpp +++ b/src/modules/commander/commander.cpp @@ -221,7 +221,7 @@ void print_status(); transition_result_t check_navigation_state_machine(struct vehicle_status_s *status, struct vehicle_control_mode_s *control_mode, struct vehicle_local_position_s *local_pos); -transition_result_t arm_disarm(bool arm, const int mavlink_fd, const char* armedBy); +transition_result_t arm_disarm(bool arm, const int mavlink_fd, const char *armedBy); /** * Loop that runs at a lower rate and priority for calibration and parameter tasks. @@ -233,8 +233,9 @@ void answer_command(struct vehicle_command_s &cmd, enum VEHICLE_CMD_RESULT resul int commander_main(int argc, char *argv[]) { - if (argc < 1) + if (argc < 1) { usage("missing command"); + } if (!strcmp(argv[1], "start")) { @@ -261,8 +262,9 @@ int commander_main(int argc, char *argv[]) if (!strcmp(argv[1], "stop")) { - if (!thread_running) + if (!thread_running) { errx(0, "commander already stopped"); + } thread_should_exit = true; @@ -304,8 +306,9 @@ int commander_main(int argc, char *argv[]) void usage(const char *reason) { - if (reason) + if (reason) { fprintf(stderr, "%s\n", reason); + } fprintf(stderr, "usage: daemon {start|stop|status} [-p <additional params>]\n\n"); exit(1); @@ -364,20 +367,22 @@ void print_status() static orb_advert_t status_pub; -transition_result_t arm_disarm(bool arm, const int mavlink_fd, const char* armedBy) +transition_result_t arm_disarm(bool arm, const int mavlink_fd, const char *armedBy) { - transition_result_t arming_res = TRANSITION_NOT_CHANGED; - - // Transition the armed state. By passing mavlink_fd to arming_state_transition it will - // output appropriate error messages if the state cannot transition. - arming_res = arming_state_transition(&status, &safety, arm ? ARMING_STATE_ARMED : ARMING_STATE_STANDBY, &armed, mavlink_fd); - if (arming_res == TRANSITION_CHANGED && mavlink_fd) { - mavlink_log_info(mavlink_fd, "[cmd] %s by %s", arm ? "ARMED" : "DISARMED", armedBy); - } else if (arming_res == TRANSITION_DENIED) { - tune_negative(true); - } - - return arming_res; + transition_result_t arming_res = TRANSITION_NOT_CHANGED; + + // Transition the armed state. By passing mavlink_fd to arming_state_transition it will + // output appropriate error messages if the state cannot transition. + arming_res = arming_state_transition(&status, &safety, arm ? ARMING_STATE_ARMED : ARMING_STATE_STANDBY, &armed, mavlink_fd); + + if (arming_res == TRANSITION_CHANGED && mavlink_fd) { + mavlink_log_info(mavlink_fd, "[cmd] %s by %s", arm ? "ARMED" : "DISARMED", armedBy); + + } else if (arming_res == TRANSITION_DENIED) { + tune_negative(true); + } + + return arming_res; } bool handle_command(struct vehicle_status_s *status, const struct safety_s *safety, struct vehicle_command_s *cmd, struct actuator_armed_s *armed, struct home_position_s *home, struct vehicle_global_position_s *global_pos, orb_advert_t *home_pub) @@ -417,14 +422,16 @@ bool handle_command(struct vehicle_status_s *status, const struct safety_s *safe } } - if (hil_ret == OK) + if (hil_ret == OK) { ret = true; + } - // Transition the arming state - arming_res = arm_disarm(base_mode & MAV_MODE_FLAG_SAFETY_ARMED, mavlink_fd, "set mode command"); + // Transition the arming state + arming_res = arm_disarm(base_mode & MAV_MODE_FLAG_SAFETY_ARMED, mavlink_fd, "set mode command"); - if (arming_res == TRANSITION_CHANGED) + if (arming_res == TRANSITION_CHANGED) { ret = true; + } /* set main state */ transition_result_t main_res = TRANSITION_DENIED; @@ -435,13 +442,13 @@ bool handle_command(struct vehicle_status_s *status, const struct safety_s *safe /* MANUAL */ main_res = main_state_transition(status, MAIN_STATE_MANUAL); - } else if (custom_main_mode == PX4_CUSTOM_MAIN_MODE_ALTCTRL) { - /* ALTCTRL */ - main_res = main_state_transition(status, MAIN_STATE_ALTCTRL); + } else if (custom_main_mode == PX4_CUSTOM_MAIN_MODE_ALTCTL) { + /* ALTCTL */ + main_res = main_state_transition(status, MAIN_STATE_ALTCTL); - } else if (custom_main_mode == PX4_CUSTOM_MAIN_MODE_POSCTRL) { - /* POSCTRL */ - main_res = main_state_transition(status, MAIN_STATE_POSCTRL); + } else if (custom_main_mode == PX4_CUSTOM_MAIN_MODE_POSCTL) { + /* POSCTL */ + main_res = main_state_transition(status, MAIN_STATE_POSCTL); } else if (custom_main_mode == PX4_CUSTOM_MAIN_MODE_AUTO) { /* AUTO */ @@ -456,8 +463,8 @@ bool handle_command(struct vehicle_status_s *status, const struct safety_s *safe } else if (base_mode & MAV_MODE_FLAG_MANUAL_INPUT_ENABLED) { if (base_mode & MAV_MODE_FLAG_GUIDED_ENABLED) { - /* POSCTRL */ - main_res = main_state_transition(status, MAIN_STATE_POSCTRL); + /* POSCTL */ + main_res = main_state_transition(status, MAIN_STATE_POSCTL); } else if (base_mode & MAV_MODE_FLAG_STABILIZE_ENABLED) { /* MANUAL */ @@ -466,8 +473,9 @@ bool handle_command(struct vehicle_status_s *status, const struct safety_s *safe } } - if (main_res == TRANSITION_CHANGED) + if (main_res == TRANSITION_CHANGED) { ret = true; + } if (arming_res != TRANSITION_DENIED && main_res != TRANSITION_DENIED) { result = VEHICLE_CMD_RESULT_ACCEPTED; @@ -480,24 +488,28 @@ bool handle_command(struct vehicle_status_s *status, const struct safety_s *safe } case VEHICLE_CMD_COMPONENT_ARM_DISARM: { - // Follow exactly what the mavlink spec says for values: 0.0f for disarm, 1.0f for arm. - // We use an float epsilon delta to test float equality. - if (cmd->param1 != 0.0f && (fabsf(cmd->param1 - 1.0f) > 2.0f * FLT_EPSILON)) { + // Follow exactly what the mavlink spec says for values: 0.0f for disarm, 1.0f for arm. + // We use an float epsilon delta to test float equality. + if (cmd->param1 != 0.0f && (fabsf(cmd->param1 - 1.0f) > 2.0f * FLT_EPSILON)) { mavlink_log_info(mavlink_fd, "Unsupported ARM_DISARM parameter: %.6f", cmd->param1); - } else { - // Flick to inair restore first if this comes from an onboard system - if (cmd->source_system == status->system_id && cmd->source_component == status->component_id) { - status->arming_state = ARMING_STATE_IN_AIR_RESTORE; - } - transition_result_t arming_res = arm_disarm(cmd->param1 != 0.0f, mavlink_fd, "arm/disarm component command"); - if (arming_res == TRANSITION_DENIED) { - mavlink_log_critical(mavlink_fd, "#audio: REJECTING component arm cmd"); - result = VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED; - } else { - result = VEHICLE_CMD_RESULT_ACCEPTED; - } - } + } else { + + // Flick to inair restore first if this comes from an onboard system + if (cmd->source_system == status->system_id && cmd->source_component == status->component_id) { + status->arming_state = ARMING_STATE_IN_AIR_RESTORE; + } + + transition_result_t arming_res = arm_disarm(cmd->param1 != 0.0f, mavlink_fd, "arm/disarm component command"); + + if (arming_res == TRANSITION_DENIED) { + mavlink_log_critical(mavlink_fd, "#audio: REJECTING component arm cmd"); + result = VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED; + + } else { + result = VEHICLE_CMD_RESULT_ACCEPTED; + } + } } break; @@ -525,7 +537,7 @@ bool handle_command(struct vehicle_status_s *status, const struct safety_s *safe } break; - /* Flight termination */ + /* Flight termination */ case VEHICLE_CMD_DO_SET_SERVO: { //xxx: needs its own mavlink command //XXX: to enable the parachute, a param needs to be set @@ -545,6 +557,7 @@ bool handle_command(struct vehicle_status_s *status, const struct safety_s *safe case VEHICLE_CMD_DO_SET_HOME: { bool use_current = cmd->param1 > 0.5f; + if (use_current) { /* use current position */ if (status->condition_global_position_valid) { @@ -588,6 +601,7 @@ bool handle_command(struct vehicle_status_s *status, const struct safety_s *safe } } break; + case VEHICLE_CMD_PREFLIGHT_REBOOT_SHUTDOWN: case VEHICLE_CMD_PREFLIGHT_CALIBRATION: case VEHICLE_CMD_PREFLIGHT_SET_SENSOR_OFFSETS: @@ -601,6 +615,7 @@ bool handle_command(struct vehicle_status_s *status, const struct safety_s *safe answer_command(*cmd, VEHICLE_CMD_RESULT_UNSUPPORTED); break; } + if (result != VEHICLE_CMD_RESULT_UNSUPPORTED) { /* already warned about unsupported commands in "default" case */ answer_command(*cmd, result); @@ -634,8 +649,8 @@ int commander_thread_main(int argc, char *argv[]) char *main_states_str[MAIN_STATE_MAX]; main_states_str[0] = "MANUAL"; - main_states_str[1] = "ALTCTRL"; - main_states_str[2] = "POSCTRL"; + main_states_str[1] = "ALTCTL"; + main_states_str[2] = "POSCTL"; main_states_str[3] = "AUTO"; char *arming_states_str[ARMING_STATE_MAX]; @@ -883,6 +898,7 @@ int commander_thread_main(int argc, char *argv[]) /* re-check RC calibration */ rc_calibration_ok = (OK == rc_calibration_check(mavlink_fd)); } + /* navigation parameters */ param_get(_param_takeoff_alt, &takeoff_alt); param_get(_param_enable_parachute, ¶chute_enabled); @@ -923,6 +939,7 @@ int commander_thread_main(int argc, char *argv[]) /* disarm if safety is now on and still armed */ if (status.hil_state == HIL_STATE_OFF && safety.safety_switch_available && !safety.safety_off && armed.armed) { arming_state_t new_arming_state = (status.arming_state == ARMING_STATE_ARMED ? ARMING_STATE_STANDBY : ARMING_STATE_STANDBY_ERROR); + if (TRANSITION_CHANGED == arming_state_transition(&status, &safety, new_arming_state, &armed)) { mavlink_log_info(mavlink_fd, "[cmd] DISARMED by safety switch"); } @@ -940,9 +957,11 @@ int commander_thread_main(int argc, char *argv[]) /* update condition_global_position_valid */ /* hysteresis for EPH/EPV */ bool eph_epv_good; + if (status.condition_global_position_valid) { if (global_position.eph > eph_epv_threshold * 2.0f || global_position.epv > eph_epv_threshold * 2.0f) { eph_epv_good = false; + } else { eph_epv_good = true; } @@ -950,17 +969,19 @@ int commander_thread_main(int argc, char *argv[]) } else { if (global_position.eph < eph_epv_threshold && global_position.epv < eph_epv_threshold) { eph_epv_good = true; + } else { eph_epv_good = false; } } + check_valid(global_position.timestamp, POSITION_TIMEOUT, eph_epv_good, &(status.condition_global_position_valid), &status_changed); /* check if GPS fix is ok */ /* update home position */ if (!status.condition_home_position_valid && status.condition_global_position_valid && !armed.armed && - (global_position.eph < eph_epv_threshold) && (global_position.epv < eph_epv_threshold)) { + (global_position.eph < eph_epv_threshold) && (global_position.epv < eph_epv_threshold)) { home.lat = global_position.lat; home.lon = global_position.lon; @@ -995,6 +1016,7 @@ int commander_thread_main(int argc, char *argv[]) check_valid(local_position.timestamp, POSITION_TIMEOUT, local_position.z_valid, &(status.condition_local_altitude_valid), &status_changed); static bool published_condition_landed_fw = false; + if (status.is_rotary_wing && status.condition_local_altitude_valid) { if (status.condition_landed != local_position.landed) { status.condition_landed = local_position.landed; @@ -1008,6 +1030,7 @@ int commander_thread_main(int argc, char *argv[]) mavlink_log_critical(mavlink_fd, "#audio: IN AIR"); } } + } else { if (!published_condition_landed_fw) { status.condition_landed = false; // Fixedwing does not have a landing detector currently @@ -1077,8 +1100,9 @@ int commander_thread_main(int argc, char *argv[]) /* compute system load */ uint64_t interval_runtime = system_load.tasks[0].total_runtime - last_idle_time; - if (last_idle_time > 0) - status.load = 1.0f - ((float)interval_runtime / 1e6f); //system load is time spent in non-idle + if (last_idle_time > 0) { + status.load = 1.0f - ((float)interval_runtime / 1e6f); //system load is time spent in non-idle + } last_idle_time = system_load.tasks[0].total_runtime; @@ -1255,7 +1279,7 @@ int commander_thread_main(int argc, char *argv[]) status.set_nav_state_timestamp = hrt_absolute_time(); } else if ((sp_man.return_switch == SWITCH_POS_OFF || sp_man.return_switch == SWITCH_POS_MIDDLE) && - pos_sp_triplet.nav_state == NAV_STATE_RTL) { + pos_sp_triplet.nav_state == NAV_STATE_RTL) { /* RETURN switch is in normal mode, no MISSION switch mapped, interrupt if in RTL state */ status.set_nav_state = NAV_STATE_MISSION; status.set_nav_state_timestamp = hrt_absolute_time(); @@ -1320,6 +1344,7 @@ int commander_thread_main(int argc, char *argv[]) if (res == TRANSITION_DENIED) { /* LAND not allowed, set TERMINATION state */ res = failsafe_state_transition(&status, FAILSAFE_STATE_TERMINATION); + } else if (res == TRANSITION_CHANGED) { mavlink_log_critical(mavlink_fd, "#a FAILSAFE: TERMINATION"); } @@ -1335,8 +1360,8 @@ int commander_thread_main(int argc, char *argv[]) } // TODO remove this hack - /* flight termination in manual mode if assist switch is on posctrl position */ - if (!status.is_rotary_wing && parachute_enabled && armed.armed && status.main_state == MAIN_STATE_MANUAL && sp_man.posctrl_switch == SWITCH_POS_ON) { + /* flight termination in manual mode if assist switch is on POSCTL position */ + if (!status.is_rotary_wing && parachute_enabled && armed.armed && status.main_state == MAIN_STATE_MANUAL && sp_man.posctl_switch == SWITCH_POS_ON) { if (TRANSITION_CHANGED == failsafe_state_transition(&status, FAILSAFE_STATE_TERMINATION)) { tune_positive(armed.armed); } @@ -1350,8 +1375,9 @@ int commander_thread_main(int argc, char *argv[]) orb_copy(ORB_ID(vehicle_command), cmd_sub, &cmd); /* handle it */ - if (handle_command(&status, &safety, &cmd, &armed, &home, &global_position, &home_pub)) + if (handle_command(&status, &safety, &cmd, &armed, &home, &global_position, &home_pub)) { status_changed = true; + } } /* check which state machines for changes, clear "changed" flag */ @@ -1368,7 +1394,7 @@ int commander_thread_main(int argc, char *argv[]) /* update home position on arming if at least 2s from commander start spent to avoid setting home on in-air restart */ if (armed.armed && !was_armed && hrt_absolute_time() > start_time + 2000000 && status.condition_global_position_valid && - (global_position.eph < eph_epv_threshold) && (global_position.epv < eph_epv_threshold)) { + (global_position.eph < eph_epv_threshold) && (global_position.epv < eph_epv_threshold)) { // TODO remove code duplication home.lat = global_position.lat; @@ -1390,6 +1416,7 @@ int commander_thread_main(int argc, char *argv[]) status.condition_home_position_valid = true; } } + was_armed = armed.armed; if (main_state_changed) { @@ -1553,21 +1580,24 @@ control_status_leds(vehicle_status_s *status, const actuator_armed_s *actuator_a } else if (actuator_armed->ready_to_arm) { /* ready to arm, blink at 1Hz */ - if (leds_counter % 20 == 0) + if (leds_counter % 20 == 0) { led_toggle(LED_BLUE); + } } else { /* not ready to arm, blink at 10Hz */ - if (leds_counter % 2 == 0) + if (leds_counter % 2 == 0) { led_toggle(LED_BLUE); + } } #endif /* give system warnings on error LED, XXX maybe add memory usage warning too */ if (status->load > 0.95f) { - if (leds_counter % 2 == 0) + if (leds_counter % 2 == 0) { led_toggle(LED_AMBER); + } } else { led_off(LED_AMBER); @@ -1593,25 +1623,25 @@ set_main_state_rc(struct vehicle_status_s *status, struct manual_control_setpoin break; case SWITCH_POS_MIDDLE: // ASSIST - if (sp_man->posctrl_switch == SWITCH_POS_ON) { - res = main_state_transition(status, MAIN_STATE_POSCTRL); + if (sp_man->posctl_switch == SWITCH_POS_ON) { + res = main_state_transition(status, MAIN_STATE_POSCTL); if (res != TRANSITION_DENIED) { break; // changed successfully or already in this state } - // else fallback to ALTCTRL - print_reject_mode(status, "POSCTRL"); + // else fallback to ALTCTL + print_reject_mode(status, "POSCTL"); } - res = main_state_transition(status, MAIN_STATE_ALTCTRL); + res = main_state_transition(status, MAIN_STATE_ALTCTL); if (res != TRANSITION_DENIED) { break; // changed successfully or already in this mode } - if (sp_man->posctrl_switch != SWITCH_POS_ON) { - print_reject_mode(status, "ALTCTRL"); + if (sp_man->posctl_switch != SWITCH_POS_ON) { + print_reject_mode(status, "ALTCTL"); } // else fallback to MANUAL @@ -1626,9 +1656,9 @@ set_main_state_rc(struct vehicle_status_s *status, struct manual_control_setpoin break; // changed successfully or already in this state } - // else fallback to ALTCTRL (POSCTRL likely will not work too) + // else fallback to ALTCTL (POSCTL likely will not work too) print_reject_mode(status, "AUTO"); - res = main_state_transition(status, MAIN_STATE_ALTCTRL); + res = main_state_transition(status, MAIN_STATE_ALTCTL); if (res != TRANSITION_DENIED) { break; // changed successfully or already in this state @@ -1674,7 +1704,7 @@ set_control_mode() control_mode.flag_control_velocity_enabled = false; break; - case MAIN_STATE_ALTCTRL: + case MAIN_STATE_ALTCTL: control_mode.flag_control_manual_enabled = true; control_mode.flag_control_auto_enabled = false; control_mode.flag_control_rates_enabled = true; @@ -1685,7 +1715,7 @@ set_control_mode() control_mode.flag_control_velocity_enabled = false; break; - case MAIN_STATE_POSCTRL: + case MAIN_STATE_POSCTL: control_mode.flag_control_manual_enabled = true; control_mode.flag_control_auto_enabled = false; control_mode.flag_control_rates_enabled = true; @@ -1781,7 +1811,7 @@ void answer_command(struct vehicle_command_s &cmd, enum VEHICLE_CMD_RESULT resul { switch (result) { case VEHICLE_CMD_RESULT_ACCEPTED: - tune_positive(true); + tune_positive(true); break; case VEHICLE_CMD_RESULT_DENIED: @@ -1831,8 +1861,9 @@ void *commander_low_prio_loop(void *arg) int pret = poll(&fds[0], (sizeof(fds) / sizeof(fds[0])), 200); /* timed out - periodic check for thread_should_exit, etc. */ - if (pret == 0) + if (pret == 0) { continue; + } /* this is undesirable but not much we can do - might want to flag unhappy status */ if (pret < 0) { @@ -1847,8 +1878,9 @@ void *commander_low_prio_loop(void *arg) if (cmd.command == VEHICLE_CMD_DO_SET_MODE || cmd.command == VEHICLE_CMD_COMPONENT_ARM_DISARM || cmd.command == VEHICLE_CMD_NAV_TAKEOFF || - cmd.command == VEHICLE_CMD_DO_SET_SERVO) + cmd.command == VEHICLE_CMD_DO_SET_SERVO) { continue; + } /* only handle low-priority commands here */ switch (cmd.command) { @@ -1926,6 +1958,7 @@ void *commander_low_prio_loop(void *arg) /* airspeed calibration */ answer_command(cmd, VEHICLE_CMD_RESULT_ACCEPTED); calib_ret = do_airspeed_calibration(mavlink_fd); + } else if ((int)(cmd.param4) == 0) { /* RC calibration ended - have we been in one worth confirming? */ if (status.rc_input_blocked) { @@ -1940,10 +1973,12 @@ void *commander_low_prio_loop(void *arg) } - if (calib_ret == OK) + if (calib_ret == OK) { tune_positive(true); - else + + } else { tune_negative(true); + } arming_state_transition(&status, &safety, ARMING_STATE_STANDBY, &armed); @@ -1963,11 +1998,13 @@ void *commander_low_prio_loop(void *arg) mavlink_log_critical(mavlink_fd, "#audio: parameters load ERROR"); /* convenience as many parts of NuttX use negative errno */ - if (ret < 0) + if (ret < 0) { ret = -ret; + } - if (ret < 1000) + if (ret < 1000) { mavlink_log_critical(mavlink_fd, "#audio: %s", strerror(ret)); + } answer_command(cmd, VEHICLE_CMD_RESULT_FAILED); } @@ -1983,11 +2020,13 @@ void *commander_low_prio_loop(void *arg) mavlink_log_critical(mavlink_fd, "#audio: parameters save error"); /* convenience as many parts of NuttX use negative errno */ - if (ret < 0) + if (ret < 0) { ret = -ret; + } - if (ret < 1000) + if (ret < 1000) { mavlink_log_critical(mavlink_fd, "#audio: %s", strerror(ret)); + } answer_command(cmd, VEHICLE_CMD_RESULT_FAILED); } @@ -1997,8 +2036,8 @@ void *commander_low_prio_loop(void *arg) } case VEHICLE_CMD_START_RX_PAIR: - /* handled in the IO driver */ - break; + /* handled in the IO driver */ + break; default: /* don't answer on unsupported commands, it will be done in main loop */ diff --git a/src/modules/commander/commander_helper.cpp b/src/modules/commander/commander_helper.cpp index 0fd3c9e9e..86f77cdb8 100644 --- a/src/modules/commander/commander_helper.cpp +++ b/src/modules/commander/commander_helper.cpp @@ -113,17 +113,22 @@ void buzzer_deinit() close(buzzer); } -void set_tune(int tune) { +void set_tune(int tune) +{ unsigned int new_tune_duration = tune_durations[tune]; + /* don't interrupt currently playing non-repeating tune by repeating */ if (tune_end == 0 || new_tune_duration != 0 || hrt_absolute_time() > tune_end) { /* allow interrupting current non-repeating tune by the same tune */ if (tune != tune_current || new_tune_duration != 0) { ioctl(buzzer, TONE_SET_ALARM, tune); } + tune_current = tune; + if (new_tune_duration != 0) { tune_end = hrt_absolute_time() + new_tune_duration; + } else { tune_end = 0; } @@ -138,6 +143,7 @@ void tune_positive(bool use_buzzer) blink_msg_end = hrt_absolute_time() + BLINK_MSG_TIME; rgbled_set_color(RGBLED_COLOR_GREEN); rgbled_set_mode(RGBLED_MODE_BLINK_FAST); + if (use_buzzer) { set_tune(TONE_NOTIFY_POSITIVE_TUNE); } @@ -151,6 +157,7 @@ void tune_neutral(bool use_buzzer) blink_msg_end = hrt_absolute_time() + BLINK_MSG_TIME; rgbled_set_color(RGBLED_COLOR_WHITE); rgbled_set_mode(RGBLED_MODE_BLINK_FAST); + if (use_buzzer) { set_tune(TONE_NOTIFY_NEUTRAL_TUNE); } @@ -164,6 +171,7 @@ void tune_negative(bool use_buzzer) blink_msg_end = hrt_absolute_time() + BLINK_MSG_TIME; rgbled_set_color(RGBLED_COLOR_RED); rgbled_set_mode(RGBLED_MODE_BLINK_FAST); + if (use_buzzer) { set_tune(TONE_NOTIFY_NEGATIVE_TUNE); } @@ -244,22 +252,25 @@ int led_off(int led) void rgbled_set_color(rgbled_color_t color) { - if (rgbleds != -1) + if (rgbleds != -1) { ioctl(rgbleds, RGBLED_SET_COLOR, (unsigned long)color); + } } void rgbled_set_mode(rgbled_mode_t mode) { - if (rgbleds != -1) + if (rgbleds != -1) { ioctl(rgbleds, RGBLED_SET_MODE, (unsigned long)mode); + } } void rgbled_set_pattern(rgbled_pattern_t *pattern) { - if (rgbleds != -1) + if (rgbleds != -1) { ioctl(rgbleds, RGBLED_SET_PATTERN, (unsigned long)pattern); + } } float battery_remaining_estimate_voltage(float voltage, float discharged) @@ -299,6 +310,7 @@ float battery_remaining_estimate_voltage(float voltage, float discharged) if (bat_capacity > 0.0f) { /* if battery capacity is known, use discharged current for estimate, but don't show more than voltage estimate */ ret = fminf(remaining_voltage, 1.0f - discharged / bat_capacity); + } else { /* else use voltage */ ret = remaining_voltage; diff --git a/src/modules/commander/commander_tests/state_machine_helper_test.cpp b/src/modules/commander/commander_tests/state_machine_helper_test.cpp index 18586053b..ee0d08391 100644 --- a/src/modules/commander/commander_tests/state_machine_helper_test.cpp +++ b/src/modules/commander/commander_tests/state_machine_helper_test.cpp @@ -320,15 +320,15 @@ bool StateMachineHelperTest::mainStateTransitionTest(void) // MANUAL to ALTCTRL. current_state.main_state = MAIN_STATE_MANUAL; current_state.condition_local_altitude_valid = true; - new_main_state = MAIN_STATE_ALTCTRL; + new_main_state = MAIN_STATE_ALTCTL; ut_assert("tranisition: manual to altctrl", TRANSITION_CHANGED == main_state_transition(¤t_state, new_main_state)); - ut_assert("new state: altctrl", MAIN_STATE_ALTCTRL == current_state.main_state); + ut_assert("new state: altctrl", MAIN_STATE_ALTCTL == current_state.main_state); // MANUAL to ALTCTRL, invalid local altitude. current_state.main_state = MAIN_STATE_MANUAL; current_state.condition_local_altitude_valid = false; - new_main_state = MAIN_STATE_ALTCTRL; + new_main_state = MAIN_STATE_ALTCTL; ut_assert("no transition: invalid local altitude", TRANSITION_DENIED == main_state_transition(¤t_state, new_main_state)); ut_assert("current state: manual", MAIN_STATE_MANUAL == current_state.main_state); @@ -336,15 +336,15 @@ bool StateMachineHelperTest::mainStateTransitionTest(void) // MANUAL to POSCTRL. current_state.main_state = MAIN_STATE_MANUAL; current_state.condition_local_position_valid = true; - new_main_state = MAIN_STATE_POSCTRL; + new_main_state = MAIN_STATE_POSCTL; ut_assert("transition: manual to posctrl", TRANSITION_CHANGED == main_state_transition(¤t_state, new_main_state)); - ut_assert("current state: posctrl", MAIN_STATE_POSCTRL == current_state.main_state); + ut_assert("current state: posctrl", MAIN_STATE_POSCTL == current_state.main_state); // MANUAL to POSCTRL, invalid local position. current_state.main_state = MAIN_STATE_MANUAL; current_state.condition_local_position_valid = false; - new_main_state = MAIN_STATE_POSCTRL; + new_main_state = MAIN_STATE_POSCTL; ut_assert("no transition: invalid position", TRANSITION_DENIED == main_state_transition(¤t_state, new_main_state)); ut_assert("current state: manual", MAIN_STATE_MANUAL == current_state.main_state); diff --git a/src/modules/commander/gyro_calibration.cpp b/src/modules/commander/gyro_calibration.cpp index 30cd0d48d..cbc2844c1 100644 --- a/src/modules/commander/gyro_calibration.cpp +++ b/src/modules/commander/gyro_calibration.cpp @@ -110,8 +110,9 @@ int do_gyro_calibration(int mavlink_fd) gyro_scale.z_offset += gyro_report.z; calibration_counter++; - if (calibration_counter % (calibration_count / 20) == 0) + if (calibration_counter % (calibration_count / 20) == 0) { mavlink_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, (calibration_counter * 100) / calibration_count); + } } else { poll_errcount++; @@ -163,8 +164,9 @@ int do_gyro_calibration(int mavlink_fd) /* apply new offsets */ fd = open(GYRO_DEVICE_PATH, 0); - if (OK != ioctl(fd, GYROIOCSSCALE, (long unsigned int)&gyro_scale)) + if (OK != ioctl(fd, GYROIOCSSCALE, (long unsigned int)&gyro_scale)) { warn("WARNING: failed to apply new offsets for gyro"); + } close(fd); @@ -178,9 +180,9 @@ int do_gyro_calibration(int mavlink_fd) float mag_last = -atan2f(raw.magnetometer_ga[1], raw.magnetometer_ga[0]); - if (mag_last > M_PI_F) mag_last -= 2 * M_PI_F; + if (mag_last > M_PI_F) { mag_last -= 2 * M_PI_F; } - if (mag_last < -M_PI_F) mag_last += 2 * M_PI_F; + if (mag_last < -M_PI_F) { mag_last += 2 * M_PI_F; } uint64_t last_time = hrt_absolute_time(); @@ -220,15 +222,15 @@ int do_gyro_calibration(int mavlink_fd) //float mag = -atan2f(magNav(1),magNav(0)); float mag = -atan2f(raw.magnetometer_ga[1], raw.magnetometer_ga[0]); - if (mag > M_PI_F) mag -= 2 * M_PI_F; + if (mag > M_PI_F) { mag -= 2 * M_PI_F; } - if (mag < -M_PI_F) mag += 2 * M_PI_F; + if (mag < -M_PI_F) { mag += 2 * M_PI_F; } float diff = mag - mag_last; - if (diff > M_PI_F) diff -= 2 * M_PI_F; + if (diff > M_PI_F) { diff -= 2 * M_PI_F; } - if (diff < -M_PI_F) diff += 2 * M_PI_F; + if (diff < -M_PI_F) { diff += 2 * M_PI_F; } baseline_integral += diff; mag_last = mag; diff --git a/src/modules/commander/mag_calibration.cpp b/src/modules/commander/mag_calibration.cpp index 4ebf266f4..9296db6ed 100644 --- a/src/modules/commander/mag_calibration.cpp +++ b/src/modules/commander/mag_calibration.cpp @@ -124,6 +124,7 @@ int do_mag_calibration(int mavlink_fd) res = ERROR; return res; } + } else { /* exit */ return ERROR; @@ -163,8 +164,9 @@ int do_mag_calibration(int mavlink_fd) calibration_counter++; - if (calibration_counter % (calibration_maxcount / 20) == 0) + if (calibration_counter % (calibration_maxcount / 20) == 0) { mavlink_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 20 + (calibration_counter * 50) / calibration_maxcount); + } } else { poll_errcount++; @@ -198,14 +200,17 @@ int do_mag_calibration(int mavlink_fd) } } - if (x != NULL) + if (x != NULL) { free(x); + } - if (y != NULL) + if (y != NULL) { free(y); + } - if (z != NULL) + if (z != NULL) { free(z); + } if (res == OK) { /* apply calibration and set parameters */ @@ -234,23 +239,29 @@ int do_mag_calibration(int mavlink_fd) if (res == OK) { /* set parameters */ - if (param_set(param_find("SENS_MAG_XOFF"), &(mscale.x_offset))) + if (param_set(param_find("SENS_MAG_XOFF"), &(mscale.x_offset))) { res = ERROR; + } - if (param_set(param_find("SENS_MAG_YOFF"), &(mscale.y_offset))) + if (param_set(param_find("SENS_MAG_YOFF"), &(mscale.y_offset))) { res = ERROR; + } - if (param_set(param_find("SENS_MAG_ZOFF"), &(mscale.z_offset))) + if (param_set(param_find("SENS_MAG_ZOFF"), &(mscale.z_offset))) { res = ERROR; + } - if (param_set(param_find("SENS_MAG_XSCALE"), &(mscale.x_scale))) + if (param_set(param_find("SENS_MAG_XSCALE"), &(mscale.x_scale))) { res = ERROR; + } - if (param_set(param_find("SENS_MAG_YSCALE"), &(mscale.y_scale))) + if (param_set(param_find("SENS_MAG_YSCALE"), &(mscale.y_scale))) { res = ERROR; + } - if (param_set(param_find("SENS_MAG_ZSCALE"), &(mscale.z_scale))) + if (param_set(param_find("SENS_MAG_ZSCALE"), &(mscale.z_scale))) { res = ERROR; + } if (res != OK) { mavlink_log_critical(mavlink_fd, CAL_FAILED_SET_PARAMS_MSG); diff --git a/src/modules/commander/px4_custom_mode.h b/src/modules/commander/px4_custom_mode.h index e6274fb89..a83c81850 100644 --- a/src/modules/commander/px4_custom_mode.h +++ b/src/modules/commander/px4_custom_mode.h @@ -12,8 +12,8 @@ enum PX4_CUSTOM_MAIN_MODE { PX4_CUSTOM_MAIN_MODE_MANUAL = 1, - PX4_CUSTOM_MAIN_MODE_ALTCTRL, - PX4_CUSTOM_MAIN_MODE_POSCTRL, + PX4_CUSTOM_MAIN_MODE_ALTCTL, + PX4_CUSTOM_MAIN_MODE_POSCTL, PX4_CUSTOM_MAIN_MODE_AUTO, }; diff --git a/src/modules/commander/state_machine_helper.cpp b/src/modules/commander/state_machine_helper.cpp index 3b6d95135..abcf72717 100644 --- a/src/modules/commander/state_machine_helper.cpp +++ b/src/modules/commander/state_machine_helper.cpp @@ -75,38 +75,38 @@ static bool failsafe_state_changed = true; // though the transition is marked as true additional checks must be made. See arming_state_transition // code for those checks. static const bool arming_transitions[ARMING_STATE_MAX][ARMING_STATE_MAX] = { - // INIT, STANDBY, ARMED, ARMED_ERROR, STANDBY_ERROR, REBOOT, IN_AIR_RESTORE - { /* ARMING_STATE_INIT */ true, true, false, false, false, false, false }, - { /* ARMING_STATE_STANDBY */ true, true, true, true, false, false, false }, - { /* ARMING_STATE_ARMED */ false, true, true, false, false, false, true }, - { /* ARMING_STATE_ARMED_ERROR */ false, false, true, true, false, false, false }, - { /* ARMING_STATE_STANDBY_ERROR */ true, true, false, true, true, false, false }, - { /* ARMING_STATE_REBOOT */ true, true, false, false, true, true, true }, - { /* ARMING_STATE_IN_AIR_RESTORE */ false, false, false, false, false, false, false }, // NYI + // INIT, STANDBY, ARMED, ARMED_ERROR, STANDBY_ERROR, REBOOT, IN_AIR_RESTORE + { /* ARMING_STATE_INIT */ true, true, false, false, false, false, false }, + { /* ARMING_STATE_STANDBY */ true, true, true, true, false, false, false }, + { /* ARMING_STATE_ARMED */ false, true, true, false, false, false, true }, + { /* ARMING_STATE_ARMED_ERROR */ false, false, true, true, false, false, false }, + { /* ARMING_STATE_STANDBY_ERROR */ true, true, false, true, true, false, false }, + { /* ARMING_STATE_REBOOT */ true, true, false, false, true, true, true }, + { /* ARMING_STATE_IN_AIR_RESTORE */ false, false, false, false, false, false, false }, // NYI }; // You can index into the array with an arming_state_t in order to get it's textual representation -static const char* state_names[ARMING_STATE_MAX] = { - "ARMING_STATE_INIT", - "ARMING_STATE_STANDBY", - "ARMING_STATE_ARMED", - "ARMING_STATE_ARMED_ERROR", - "ARMING_STATE_STANDBY_ERROR", - "ARMING_STATE_REBOOT", - "ARMING_STATE_IN_AIR_RESTORE", +static const char *state_names[ARMING_STATE_MAX] = { + "ARMING_STATE_INIT", + "ARMING_STATE_STANDBY", + "ARMING_STATE_ARMED", + "ARMING_STATE_ARMED_ERROR", + "ARMING_STATE_STANDBY_ERROR", + "ARMING_STATE_REBOOT", + "ARMING_STATE_IN_AIR_RESTORE", }; transition_result_t arming_state_transition(struct vehicle_status_s *status, /// current vehicle status - const struct safety_s *safety, /// current safety settings - arming_state_t new_arming_state, /// arming state requested - struct actuator_armed_s *armed, /// current armed status - const int mavlink_fd) /// mavlink fd for error reporting, 0 for none + const struct safety_s *safety, /// current safety settings + arming_state_t new_arming_state, /// arming state requested + struct actuator_armed_s *armed, /// current armed status + const int mavlink_fd) /// mavlink fd for error reporting, 0 for none { - // Double check that our static arrays are still valid - ASSERT(ARMING_STATE_INIT == 0); - ASSERT(ARMING_STATE_IN_AIR_RESTORE == ARMING_STATE_MAX - 1); - + // Double check that our static arrays are still valid + ASSERT(ARMING_STATE_INIT == 0); + ASSERT(ARMING_STATE_IN_AIR_RESTORE == ARMING_STATE_MAX - 1); + /* * Perform an atomic state update */ @@ -117,63 +117,70 @@ arming_state_transition(struct vehicle_status_s *status, /// current /* only check transition if the new state is actually different from the current one */ if (new_arming_state == status->arming_state) { ret = TRANSITION_NOT_CHANGED; + } else { /* enforce lockdown in HIL */ if (status->hil_state == HIL_STATE_ON) { armed->lockdown = true; + } else { armed->lockdown = false; } - - // Check that we have a valid state transition - bool valid_transition = arming_transitions[new_arming_state][status->arming_state]; - if (valid_transition) { - // We have a good transition. Now perform any secondary validation. - if (new_arming_state == ARMING_STATE_ARMED) { - // Fail transition if we need safety switch press - // Allow if coming from in air restore - // Allow if HIL_STATE_ON - if (status->arming_state != ARMING_STATE_IN_AIR_RESTORE && status->hil_state == HIL_STATE_OFF && safety->safety_switch_available && !safety->safety_off) { - if (mavlink_fd) { - mavlink_log_critical(mavlink_fd, "NOT ARMING: Press safety switch first."); - } - valid_transition = false; - } - } else if (new_arming_state == ARMING_STATE_STANDBY && status->arming_state == ARMING_STATE_ARMED_ERROR) { - new_arming_state = ARMING_STATE_STANDBY_ERROR; - } - } - - // HIL can always go to standby - if (status->hil_state == HIL_STATE_ON && new_arming_state == ARMING_STATE_STANDBY) { - valid_transition = true; - } - - /* Sensors need to be initialized for STANDBY state */ - if (new_arming_state == ARMING_STATE_STANDBY && !status->condition_system_sensors_initialized) { - valid_transition = false; - } - - // Finish up the state transition - if (valid_transition) { - armed->armed = new_arming_state == ARMING_STATE_ARMED || new_arming_state == ARMING_STATE_ARMED_ERROR; - armed->ready_to_arm = new_arming_state == ARMING_STATE_ARMED || new_arming_state == ARMING_STATE_STANDBY; - ret = TRANSITION_CHANGED; - status->arming_state = new_arming_state; - arming_state_changed = true; - } - } - + + // Check that we have a valid state transition + bool valid_transition = arming_transitions[new_arming_state][status->arming_state]; + + if (valid_transition) { + // We have a good transition. Now perform any secondary validation. + if (new_arming_state == ARMING_STATE_ARMED) { + // Fail transition if we need safety switch press + // Allow if coming from in air restore + // Allow if HIL_STATE_ON + if (status->arming_state != ARMING_STATE_IN_AIR_RESTORE && status->hil_state == HIL_STATE_OFF && safety->safety_switch_available && !safety->safety_off) { + if (mavlink_fd) { + mavlink_log_critical(mavlink_fd, "NOT ARMING: Press safety switch first."); + } + + valid_transition = false; + } + + } else if (new_arming_state == ARMING_STATE_STANDBY && status->arming_state == ARMING_STATE_ARMED_ERROR) { + new_arming_state = ARMING_STATE_STANDBY_ERROR; + } + } + + // HIL can always go to standby + if (status->hil_state == HIL_STATE_ON && new_arming_state == ARMING_STATE_STANDBY) { + valid_transition = true; + } + + /* Sensors need to be initialized for STANDBY state */ + if (new_arming_state == ARMING_STATE_STANDBY && !status->condition_system_sensors_initialized) { + valid_transition = false; + } + + // Finish up the state transition + if (valid_transition) { + armed->armed = new_arming_state == ARMING_STATE_ARMED || new_arming_state == ARMING_STATE_ARMED_ERROR; + armed->ready_to_arm = new_arming_state == ARMING_STATE_ARMED || new_arming_state == ARMING_STATE_STANDBY; + ret = TRANSITION_CHANGED; + status->arming_state = new_arming_state; + arming_state_changed = true; + } + } + /* end of atomic state update */ irqrestore(flags); - if (ret == TRANSITION_DENIED) { - static const char* errMsg = "Invalid arming transition from %s to %s"; - if (mavlink_fd) { - mavlink_log_critical(mavlink_fd, errMsg, state_names[status->arming_state], state_names[new_arming_state]); - } - warnx(errMsg, state_names[status->arming_state], state_names[new_arming_state]); - } + if (ret == TRANSITION_DENIED) { + static const char *errMsg = "Invalid arming transition from %s to %s"; + + if (mavlink_fd) { + mavlink_log_critical(mavlink_fd, errMsg, state_names[status->arming_state], state_names[new_arming_state]); + } + + warnx(errMsg, state_names[status->arming_state], state_names[new_arming_state]); + } return ret; } @@ -215,7 +222,7 @@ main_state_transition(struct vehicle_status_s *status, main_state_t new_main_sta ret = TRANSITION_CHANGED; break; - case MAIN_STATE_ALTCTRL: + case MAIN_STATE_ALTCTL: /* need at minimum altitude estimate */ if (!status->is_rotary_wing || @@ -226,7 +233,7 @@ main_state_transition(struct vehicle_status_s *status, main_state_t new_main_sta break; - case MAIN_STATE_POSCTRL: + case MAIN_STATE_POSCTL: /* need at minimum local position estimate */ if (status->condition_local_position_valid || @@ -320,6 +327,7 @@ int hil_state_transition(hil_state_t new_state, int status_pub, struct vehicle_s /* list directory */ DIR *d; d = opendir("/dev"); + if (d) { struct dirent *direntry; @@ -331,26 +339,32 @@ int hil_state_transition(hil_state_t new_state, int status_pub, struct vehicle_s if (!strncmp("tty", direntry->d_name, 3)) { continue; } + /* skip mtd devices */ if (!strncmp("mtd", direntry->d_name, 3)) { continue; } + /* skip ram devices */ if (!strncmp("ram", direntry->d_name, 3)) { continue; } + /* skip MMC devices */ if (!strncmp("mmc", direntry->d_name, 3)) { continue; } + /* skip mavlink */ if (!strcmp("mavlink", direntry->d_name)) { continue; } + /* skip console */ if (!strcmp("console", direntry->d_name)) { continue; } + /* skip null */ if (!strcmp("null", direntry->d_name)) { continue; diff --git a/src/modules/fixedwing_backside/fixedwing.cpp b/src/modules/fixedwing_backside/fixedwing.cpp index 596e286a4..bbb39f20f 100644 --- a/src/modules/fixedwing_backside/fixedwing.cpp +++ b/src/modules/fixedwing_backside/fixedwing.cpp @@ -229,8 +229,8 @@ void BlockMultiModeBacksideAutopilot::update() _actuators.control[CH_RDR] = _manual.yaw; _actuators.control[CH_THR] = _manual.throttle; - } else if (_status.main_state == MAIN_STATE_ALTCTRL || - _status.main_state == MAIN_STATE_POSCTRL /* TODO, implement pos control */) { + } else if (_status.main_state == MAIN_STATE_ALTCTL || + _status.main_state == MAIN_STATE_POSCTL /* TODO, implement pos control */) { // calculate velocity, XXX should be airspeed, but using ground speed for now // for the purpose of control we will limit the velocity feedback between diff --git a/src/modules/mavlink/mavlink_messages.cpp b/src/modules/mavlink/mavlink_messages.cpp index 9a7e636c3..b8879157e 100644 --- a/src/modules/mavlink/mavlink_messages.cpp +++ b/src/modules/mavlink/mavlink_messages.cpp @@ -124,13 +124,13 @@ void get_mavlink_mode_state(struct vehicle_status_s *status, struct position_set *mavlink_base_mode |= MAV_MODE_FLAG_MANUAL_INPUT_ENABLED | (status->is_rotary_wing ? MAV_MODE_FLAG_STABILIZE_ENABLED : 0); custom_mode.main_mode = PX4_CUSTOM_MAIN_MODE_MANUAL; - } else if (status->main_state == MAIN_STATE_ALTCTRL) { + } else if (status->main_state == MAIN_STATE_ALTCTL) { *mavlink_base_mode |= MAV_MODE_FLAG_MANUAL_INPUT_ENABLED | MAV_MODE_FLAG_STABILIZE_ENABLED; - custom_mode.main_mode = PX4_CUSTOM_MAIN_MODE_ALTCTRL; + custom_mode.main_mode = PX4_CUSTOM_MAIN_MODE_ALTCTL; - } else if (status->main_state == MAIN_STATE_POSCTRL) { + } else if (status->main_state == MAIN_STATE_POSCTL) { *mavlink_base_mode |= MAV_MODE_FLAG_MANUAL_INPUT_ENABLED | MAV_MODE_FLAG_STABILIZE_ENABLED | MAV_MODE_FLAG_GUIDED_ENABLED; - custom_mode.main_mode = PX4_CUSTOM_MAIN_MODE_POSCTRL; + custom_mode.main_mode = PX4_CUSTOM_MAIN_MODE_POSCTL; } else if (status->main_state == MAIN_STATE_AUTO) { *mavlink_base_mode |= MAV_MODE_FLAG_AUTO_ENABLED | MAV_MODE_FLAG_STABILIZE_ENABLED | MAV_MODE_FLAG_GUIDED_ENABLED; diff --git a/src/modules/segway/BlockSegwayController.cpp b/src/modules/segway/BlockSegwayController.cpp index 6d46db9bd..91230a37c 100644 --- a/src/modules/segway/BlockSegwayController.cpp +++ b/src/modules/segway/BlockSegwayController.cpp @@ -35,8 +35,8 @@ void BlockSegwayController::update() { // handle autopilot modes if (_status.main_state == MAIN_STATE_AUTO || - _status.main_state == MAIN_STATE_ALTCTRL || - _status.main_state == MAIN_STATE_POSCTRL) { + _status.main_state == MAIN_STATE_ALTCTL || + _status.main_state == MAIN_STATE_POSCTL) { _actuators.control[0] = spdCmd; _actuators.control[1] = spdCmd; diff --git a/src/modules/sensors/sensor_params.c b/src/modules/sensors/sensor_params.c index 873fff872..07be3560a 100644 --- a/src/modules/sensors/sensor_params.c +++ b/src/modules/sensors/sensor_params.c @@ -599,7 +599,7 @@ PARAM_DEFINE_INT32(RC_MAP_MODE_SW, 0); PARAM_DEFINE_INT32(RC_MAP_RETURN_SW, 0); /** - * Assist switch channel mapping. + * Posctl switch channel mapping. * * @min 0 * @max 18 @@ -616,8 +616,6 @@ PARAM_DEFINE_INT32(RC_MAP_POSCTL_SW, 0); */ PARAM_DEFINE_INT32(RC_MAP_LOITER_SW, 0); -//PARAM_DEFINE_INT32(RC_MAP_OFFB_SW, 0); - /** * Flaps channel mapping. * @@ -703,7 +701,7 @@ PARAM_DEFINE_FLOAT(RC_ASSIST_TH, 0.25f); PARAM_DEFINE_FLOAT(RC_AUTO_TH, 0.75f); /** - * Threshold for selecting posctrl mode + * Threshold for selecting posctl mode * * min:-1 * max:+1 @@ -716,7 +714,7 @@ PARAM_DEFINE_FLOAT(RC_AUTO_TH, 0.75f); * negative : true when channel<th * */ -PARAM_DEFINE_FLOAT(RC_POSCTRL_TH, 0.5f); +PARAM_DEFINE_FLOAT(RC_POSCTL_TH, 0.5f); /** * Threshold for selecting return to launch mode diff --git a/src/modules/sensors/sensors.cpp b/src/modules/sensors/sensors.cpp index 17980a8df..65165bbb2 100644 --- a/src/modules/sensors/sensors.cpp +++ b/src/modules/sensors/sensors.cpp @@ -220,8 +220,8 @@ private: struct differential_pressure_s _diff_pres; struct airspeed_s _airspeed; - math::Matrix<3,3> _board_rotation; /**< rotation matrix for the orientation that the board is mounted */ - math::Matrix<3,3> _external_mag_rotation; /**< rotation matrix for the orientation that an external mag is mounted */ + math::Matrix<3, 3> _board_rotation; /**< rotation matrix for the orientation that the board is mounted */ + math::Matrix<3, 3> _external_mag_rotation; /**< rotation matrix for the orientation that an external mag is mounted */ bool _mag_is_external; /**< true if the active mag is on an external board */ uint64_t _battery_discharged; /**< battery discharged current in mA*ms */ @@ -255,11 +255,9 @@ private: int rc_map_mode_sw; int rc_map_return_sw; - int rc_map_posctrl_sw; + int rc_map_posctl_sw; int rc_map_loiter_sw; -// int rc_map_offboard_ctrl_mode_sw; - int rc_map_flaps; int rc_map_aux1; @@ -271,12 +269,12 @@ private: int32_t rc_fails_thr; float rc_assist_th; float rc_auto_th; - float rc_posctrl_th; + float rc_posctl_th; float rc_return_th; float rc_loiter_th; bool rc_assist_inv; bool rc_auto_inv; - bool rc_posctrl_inv; + bool rc_posctl_inv; bool rc_return_inv; bool rc_loiter_inv; @@ -309,11 +307,9 @@ private: param_t rc_map_mode_sw; param_t rc_map_return_sw; - param_t rc_map_posctrl_sw; + param_t rc_map_posctl_sw; param_t rc_map_loiter_sw; -// param_t rc_map_offboard_ctrl_mode_sw; - param_t rc_map_flaps; param_t rc_map_aux1; @@ -325,7 +321,7 @@ private: param_t rc_fails_thr; param_t rc_assist_th; param_t rc_auto_th; - param_t rc_posctrl_th; + param_t rc_posctl_th; param_t rc_return_th; param_t rc_loiter_th; @@ -526,11 +522,9 @@ Sensors::Sensors() : _parameter_handles.rc_map_flaps = param_find("RC_MAP_FLAPS"); /* optional mode switches, not mapped per default */ - _parameter_handles.rc_map_posctrl_sw = param_find("RC_MAP_POSCTL_SW"); + _parameter_handles.rc_map_posctl_sw = param_find("RC_MAP_POSCTL_SW"); _parameter_handles.rc_map_loiter_sw = param_find("RC_MAP_LOITER_SW"); -// _parameter_handles.rc_map_offboard_ctrl_mode_sw = param_find("RC_MAP_OFFB_SW"); - _parameter_handles.rc_map_aux1 = param_find("RC_MAP_AUX1"); _parameter_handles.rc_map_aux2 = param_find("RC_MAP_AUX2"); _parameter_handles.rc_map_aux3 = param_find("RC_MAP_AUX3"); @@ -541,7 +535,7 @@ Sensors::Sensors() : _parameter_handles.rc_fails_thr = param_find("RC_FAILS_THR"); _parameter_handles.rc_assist_th = param_find("RC_ASSIST_TH"); _parameter_handles.rc_auto_th = param_find("RC_AUTO_TH"); - _parameter_handles.rc_posctrl_th = param_find("RC_POSCTRL_TH"); + _parameter_handles.rc_posctl_th = param_find("RC_POSCTL_TH"); _parameter_handles.rc_return_th = param_find("RC_RETURN_TH"); _parameter_handles.rc_loiter_th = param_find("RC_LOITER_TH"); @@ -644,8 +638,9 @@ Sensors::parameters_update() } /* handle wrong values */ - if (!rc_valid) + if (!rc_valid) { warnx("WARNING WARNING WARNING\n\nRC CALIBRATION NOT SANE!\n\n"); + } const char *paramerr = "FAIL PARM LOAD"; @@ -678,7 +673,7 @@ Sensors::parameters_update() warnx("%s", paramerr); } - if (param_get(_parameter_handles.rc_map_posctrl_sw, &(_parameters.rc_map_posctrl_sw)) != OK) { + if (param_get(_parameter_handles.rc_map_posctl_sw, &(_parameters.rc_map_posctl_sw)) != OK) { warnx("%s", paramerr); } @@ -690,10 +685,6 @@ Sensors::parameters_update() warnx("%s", paramerr); } -// if (param_get(_parameter_handles.rc_map_offboard_ctrl_mode_sw, &(_parameters.rc_map_offboard_ctrl_mode_sw)) != OK) { -// warnx("Failed getting offboard control mode sw chan index"); -// } - param_get(_parameter_handles.rc_map_aux1, &(_parameters.rc_map_aux1)); param_get(_parameter_handles.rc_map_aux2, &(_parameters.rc_map_aux2)); param_get(_parameter_handles.rc_map_aux3, &(_parameters.rc_map_aux3)); @@ -701,19 +692,19 @@ Sensors::parameters_update() param_get(_parameter_handles.rc_map_aux5, &(_parameters.rc_map_aux5)); param_get(_parameter_handles.rc_fails_thr, &(_parameters.rc_fails_thr)); param_get(_parameter_handles.rc_assist_th, &(_parameters.rc_assist_th)); - _parameters.rc_assist_inv = (_parameters.rc_assist_th<0); + _parameters.rc_assist_inv = (_parameters.rc_assist_th < 0); _parameters.rc_assist_th = fabs(_parameters.rc_assist_th); param_get(_parameter_handles.rc_auto_th, &(_parameters.rc_auto_th)); - _parameters.rc_auto_inv = (_parameters.rc_auto_th<0); + _parameters.rc_auto_inv = (_parameters.rc_auto_th < 0); _parameters.rc_auto_th = fabs(_parameters.rc_auto_th); - param_get(_parameter_handles.rc_posctrl_th, &(_parameters.rc_posctrl_th)); - _parameters.rc_posctrl_inv = (_parameters.rc_posctrl_th<0); - _parameters.rc_posctrl_th = fabs(_parameters.rc_posctrl_th); + param_get(_parameter_handles.rc_posctl_th, &(_parameters.rc_posctl_th)); + _parameters.rc_posctl_inv = (_parameters.rc_posctl_th < 0); + _parameters.rc_posctl_th = fabs(_parameters.rc_posctl_th); param_get(_parameter_handles.rc_return_th, &(_parameters.rc_return_th)); - _parameters.rc_return_inv = (_parameters.rc_return_th<0); + _parameters.rc_return_inv = (_parameters.rc_return_th < 0); _parameters.rc_return_th = fabs(_parameters.rc_return_th); param_get(_parameter_handles.rc_loiter_th, &(_parameters.rc_loiter_th)); - _parameters.rc_loiter_inv = (_parameters.rc_loiter_th<0); + _parameters.rc_loiter_inv = (_parameters.rc_loiter_th < 0); _parameters.rc_loiter_th = fabs(_parameters.rc_loiter_th); /* update RC function mappings */ @@ -724,13 +715,11 @@ Sensors::parameters_update() _rc.function[MODE] = _parameters.rc_map_mode_sw - 1; _rc.function[RETURN] = _parameters.rc_map_return_sw - 1; - _rc.function[POSCTRL] = _parameters.rc_map_posctrl_sw - 1; + _rc.function[POSCTL] = _parameters.rc_map_posctl_sw - 1; _rc.function[LOITER] = _parameters.rc_map_loiter_sw - 1; _rc.function[FLAPS] = _parameters.rc_map_flaps - 1; -// _rc.function[OFFBOARD_MODE] = _parameters.rc_map_offboard_ctrl_mode_sw - 1; - _rc.function[AUX_1] = _parameters.rc_map_aux1 - 1; _rc.function[AUX_2] = _parameters.rc_map_aux2 - 1; _rc.function[AUX_3] = _parameters.rc_map_aux3 - 1; @@ -843,12 +832,14 @@ Sensors::gyro_init() #ifdef CONFIG_ARCH_BOARD_PX4FMU_V1 /* set the gyro internal sampling rate up to at least 1000Hz */ - if (ioctl(fd, GYROIOCSSAMPLERATE, 1000) != OK) + if (ioctl(fd, GYROIOCSSAMPLERATE, 1000) != OK) { ioctl(fd, GYROIOCSSAMPLERATE, 800); + } /* set the driver to poll at 1000Hz */ - if (ioctl(fd, SENSORIOCSPOLLRATE, 1000) != OK) + if (ioctl(fd, SENSORIOCSPOLLRATE, 1000) != OK) { ioctl(fd, SENSORIOCSPOLLRATE, 800); + } #else @@ -903,12 +894,15 @@ Sensors::mag_init() ret = ioctl(fd, MAGIOCGEXTERNAL, 0); - if (ret < 0) + if (ret < 0) { errx(1, "FATAL: unknown if magnetometer is external or onboard"); - else if (ret == 1) + + } else if (ret == 1) { _mag_is_external = true; - else + + } else { _mag_is_external = false; + } close(fd); } @@ -1008,10 +1002,12 @@ Sensors::mag_poll(struct sensor_combined_s &raw) math::Vector<3> vect(mag_report.x, mag_report.y, mag_report.z); - if (_mag_is_external) + if (_mag_is_external) { vect = _external_mag_rotation * vect; - else + + } else { vect = _board_rotation * vect; + } raw.magnetometer_ga[0] = vect(0); raw.magnetometer_ga[1] = vect(1); @@ -1129,8 +1125,9 @@ Sensors::parameter_update_poll(bool forced) _parameters.gyro_scale[2], }; - if (OK != ioctl(fd, GYROIOCSSCALE, (long unsigned int)&gscale)) + if (OK != ioctl(fd, GYROIOCSSCALE, (long unsigned int)&gscale)) { warn("WARNING: failed to set scale / offsets for gyro"); + } close(fd); @@ -1144,8 +1141,9 @@ Sensors::parameter_update_poll(bool forced) _parameters.accel_scale[2], }; - if (OK != ioctl(fd, ACCELIOCSSCALE, (long unsigned int)&ascale)) + if (OK != ioctl(fd, ACCELIOCSSCALE, (long unsigned int)&ascale)) { warn("WARNING: failed to set scale / offsets for accel"); + } close(fd); @@ -1159,8 +1157,9 @@ Sensors::parameter_update_poll(bool forced) _parameters.mag_scale[2], }; - if (OK != ioctl(fd, MAGIOCSSCALE, (long unsigned int)&mscale)) + if (OK != ioctl(fd, MAGIOCSSCALE, (long unsigned int)&mscale)) { warn("WARNING: failed to set scale / offsets for mag"); + } close(fd); @@ -1174,8 +1173,10 @@ Sensors::parameter_update_poll(bool forced) 1.0f, }; - if (OK != ioctl(fd, AIRSPEEDIOCSSCALE, (long unsigned int)&airscale)) + if (OK != ioctl(fd, AIRSPEEDIOCSSCALE, (long unsigned int)&airscale)) { warn("WARNING: failed to set scale / offsets for airspeed sensor"); + } + close(fd); } @@ -1193,10 +1194,12 @@ void Sensors::adc_poll(struct sensor_combined_s &raw) { /* only read if publishing */ - if (!_publishing) + if (!_publishing) { return; + } hrt_abstime t = hrt_absolute_time(); + /* rate limit to 100 Hz */ if (t - _last_adc >= 10000) { /* make space for a maximum of twelve channels (to ensure reading all channels at once) */ @@ -1221,6 +1224,7 @@ Sensors::adc_poll(struct sensor_combined_s &raw) if (voltage > BATT_V_IGNORE_THRESHOLD) { _battery_status.voltage_v = voltage; + /* one-time initialization of low-pass value to avoid long init delays */ if (_battery_status.voltage_filtered_v < BATT_V_IGNORE_THRESHOLD) { _battery_status.voltage_filtered_v = voltage; @@ -1239,19 +1243,24 @@ Sensors::adc_poll(struct sensor_combined_s &raw) /* handle current only if voltage is valid */ if (_battery_status.voltage_v > 0.0f) { float current = (buf_adc[i].am_data * _parameters.battery_current_scaling); + /* check measured current value */ if (current >= 0.0f) { _battery_status.timestamp = t; _battery_status.current_a = current; + if (_battery_current_timestamp != 0) { /* initialize discharged value */ - if (_battery_status.discharged_mah < 0.0f) + if (_battery_status.discharged_mah < 0.0f) { _battery_status.discharged_mah = 0.0f; + } + _battery_discharged += current * (t - _battery_current_timestamp); _battery_status.discharged_mah = ((float) _battery_discharged) / 3600000.0f; } } } + _battery_current_timestamp = t; } else if (ADC_AIRSPEED_VOLTAGE_CHANNEL == buf_adc[i].am_channel) { @@ -1284,7 +1293,9 @@ Sensors::adc_poll(struct sensor_combined_s &raw) } } } + _last_adc = t; + if (_battery_status.voltage_filtered_v > BATT_V_IGNORE_THRESHOLD) { /* announce the battery status if needed, just publish else */ if (_battery_pub > 0) { @@ -1303,6 +1314,7 @@ Sensors::get_rc_value(enum RC_CHANNELS_FUNCTION func, float min_value, float max { if (_rc.function[func] >= 0) { float value = _rc.chan[_rc.function[func]].scaled; + if (value < min_value) { return min_value; @@ -1312,6 +1324,7 @@ Sensors::get_rc_value(enum RC_CHANNELS_FUNCTION func, float min_value, float max } else { return value; } + } else { return 0.0f; } @@ -1322,6 +1335,7 @@ Sensors::get_rc_sw3pos_position(enum RC_CHANNELS_FUNCTION func, float on_th, boo { if (_rc.function[func] >= 0) { float value = 0.5f * _rc.chan[_rc.function[func]].scaled + 0.5f; + if (on_inv ? value < on_th : value > on_th) { return SWITCH_POS_ON; @@ -1342,6 +1356,7 @@ Sensors::get_rc_sw2pos_position(enum RC_CHANNELS_FUNCTION func, float on_th, boo { if (_rc.function[func] >= 0) { float value = 0.5f * _rc.chan[_rc.function[func]].scaled + 0.5f; + if (on_inv ? value < on_th : value > on_th) { return SWITCH_POS_ON; @@ -1380,13 +1395,15 @@ Sensors::rc_poll() /* check failsafe */ int8_t fs_ch = _rc.function[_parameters.rc_map_failsafe]; // get channel mapped to throttle - if (_parameters.rc_map_failsafe>0){ // if not 0, use channel number instead of rc.function mapping + + if (_parameters.rc_map_failsafe > 0) { // if not 0, use channel number instead of rc.function mapping fs_ch = _parameters.rc_map_failsafe - 1; } + if (_parameters.rc_fails_thr > 0 && fs_ch >= 0) { /* failsafe configured */ if ((_parameters.rc_fails_thr < _parameters.min[fs_ch] && rc_input.values[fs_ch] < _parameters.rc_fails_thr) || - (_parameters.rc_fails_thr > _parameters.max[fs_ch] && rc_input.values[fs_ch] > _parameters.rc_fails_thr)) { + (_parameters.rc_fails_thr > _parameters.max[fs_ch] && rc_input.values[fs_ch] > _parameters.rc_fails_thr)) { /* failsafe triggered, signal is lost by receiver */ signal_lost = true; } @@ -1395,8 +1412,9 @@ Sensors::rc_poll() unsigned channel_limit = rc_input.channel_count; - if (channel_limit > _rc_max_chan_count) + if (channel_limit > _rc_max_chan_count) { channel_limit = _rc_max_chan_count; + } /* read out and scale values from raw message even if signal is invalid */ for (unsigned int i = 0; i < channel_limit; i++) { @@ -1404,11 +1422,13 @@ Sensors::rc_poll() /* * 1) Constrain to min/max values, as later processing depends on bounds. */ - if (rc_input.values[i] < _parameters.min[i]) + if (rc_input.values[i] < _parameters.min[i]) { rc_input.values[i] = _parameters.min[i]; + } - if (rc_input.values[i] > _parameters.max[i]) + if (rc_input.values[i] > _parameters.max[i]) { rc_input.values[i] = _parameters.max[i]; + } /* * 2) Scale around the mid point differently for lower and upper range. @@ -1440,8 +1460,9 @@ Sensors::rc_poll() _rc.chan[i].scaled *= _parameters.rev[i]; /* handle any parameter-induced blowups */ - if (!isfinite(_rc.chan[i].scaled)) + if (!isfinite(_rc.chan[i].scaled)) { _rc.chan[i].scaled = 0.0f; + } } _rc.chan_count = rc_input.channel_count; @@ -1478,7 +1499,7 @@ Sensors::rc_poll() /* mode switches */ manual.mode_switch = get_rc_sw3pos_position(MODE, _parameters.rc_auto_th, _parameters.rc_auto_inv, _parameters.rc_assist_th, _parameters.rc_assist_inv); - manual.posctrl_switch = get_rc_sw2pos_position(POSCTRL, _parameters.rc_posctrl_th, _parameters.rc_posctrl_inv); + manual.posctl_switch = get_rc_sw2pos_position(POSCTL, _parameters.rc_posctl_th, _parameters.rc_posctl_inv); manual.return_switch = get_rc_sw2pos_position(RETURN, _parameters.rc_return_th, _parameters.rc_return_inv); manual.loiter_switch = get_rc_sw2pos_position(LOITER, _parameters.rc_loiter_th, _parameters.rc_loiter_inv); @@ -1623,8 +1644,9 @@ Sensors::task_main() diff_pres_poll(raw); /* Inform other processes that new data is available to copy */ - if (_publishing) + if (_publishing) { orb_publish(ORB_ID(sensor_combined), _sensor_pub, &raw); + } /* Look for new r/c input data */ rc_poll(); @@ -1661,18 +1683,21 @@ Sensors::start() int sensors_main(int argc, char *argv[]) { - if (argc < 1) + if (argc < 1) { errx(1, "usage: sensors {start|stop|status}"); + } if (!strcmp(argv[1], "start")) { - if (sensors::g_sensors != nullptr) + if (sensors::g_sensors != nullptr) { errx(0, "already running"); + } sensors::g_sensors = new Sensors; - if (sensors::g_sensors == nullptr) + if (sensors::g_sensors == nullptr) { errx(1, "alloc failed"); + } if (OK != sensors::g_sensors->start()) { delete sensors::g_sensors; @@ -1684,8 +1709,9 @@ int sensors_main(int argc, char *argv[]) } if (!strcmp(argv[1], "stop")) { - if (sensors::g_sensors == nullptr) + if (sensors::g_sensors == nullptr) { errx(1, "not running"); + } delete sensors::g_sensors; sensors::g_sensors = nullptr; diff --git a/src/modules/uORB/topics/manual_control_setpoint.h b/src/modules/uORB/topics/manual_control_setpoint.h index 727be9492..ac394786d 100644 --- a/src/modules/uORB/topics/manual_control_setpoint.h +++ b/src/modules/uORB/topics/manual_control_setpoint.h @@ -77,8 +77,8 @@ struct manual_control_setpoint_s { float aux5; /**< default function: payload drop */ switch_pos_t mode_switch; /**< mode 3 position switch (mandatory): manual, assisted, auto */ - switch_pos_t return_switch; /**< rturn to launch 2 position switch (mandatory): no effect, return */ - switch_pos_t posctrl_switch; /**< posctrl 2 position switch (optional): altctrl, posctrl */ + switch_pos_t return_switch; /**< rturn to launch 2 position switch (mandatory): normal, return */ + switch_pos_t posctl_switch; /**< posctrl 2 position switch (optional): altctl, posctl */ switch_pos_t loiter_switch; /**< mission 2 position switch (optional): mission, loiter */ }; /**< manual control inputs */ diff --git a/src/modules/uORB/topics/rc_channels.h b/src/modules/uORB/topics/rc_channels.h index 9285235c9..b60402452 100644 --- a/src/modules/uORB/topics/rc_channels.h +++ b/src/modules/uORB/topics/rc_channels.h @@ -64,7 +64,7 @@ enum RC_CHANNELS_FUNCTION { YAW = 3, MODE = 4, RETURN = 5, - POSCTRL = 6, + POSCTL = 6, LOITER = 7, OFFBOARD_MODE = 8, FLAPS = 9, diff --git a/src/modules/uORB/topics/vehicle_status.h b/src/modules/uORB/topics/vehicle_status.h index f401140ae..f56355246 100644 --- a/src/modules/uORB/topics/vehicle_status.h +++ b/src/modules/uORB/topics/vehicle_status.h @@ -63,8 +63,8 @@ /* main state machine */ typedef enum { MAIN_STATE_MANUAL = 0, - MAIN_STATE_ALTCTRL, - MAIN_STATE_POSCTRL, + MAIN_STATE_ALTCTL, + MAIN_STATE_POSCTL, MAIN_STATE_AUTO, MAIN_STATE_MAX } main_state_t; |