diff options
Diffstat (limited to 'apps/system/usbmonitor')
-rw-r--r-- | apps/system/usbmonitor/Kconfig | 67 | ||||
-rw-r--r-- | apps/system/usbmonitor/Makefile | 117 | ||||
-rw-r--r-- | apps/system/usbmonitor/usbmonitor.c | 234 |
3 files changed, 418 insertions, 0 deletions
diff --git a/apps/system/usbmonitor/Kconfig b/apps/system/usbmonitor/Kconfig new file mode 100644 index 000000000..bde97de15 --- /dev/null +++ b/apps/system/usbmonitor/Kconfig @@ -0,0 +1,67 @@ +# +# For a description of the syntax of this configuration file, +# see misc/tools/kconfig-language.txt. +# + +config SYSTEM_USBMONITOR + bool "USB Monitor" + default n + depends on USBDEV && USBDEV_TRACE && SYSLOG + ---help--- + If USB device tracing is enabled (USBDEV_TRACE), then this option + will select the USB monitor. The USB monitor is a daemon that will + periodically collect the buffered USB trace data and dump it to the + SYSLOG device. + +if SYSTEM_USBMONITOR + +config SYSTEM_USBMONITOR_STACKSIZE + int "USB Monitor daemon stack size" + default 2048 + ---help--- + The stack size to use the the USB monitor daemon. Default: 2048 + +config SYSTEM_USBMONITOR_PRIORITY + int "USB Monitor daemon priority" + default 50 + ---help--- + The priority to use the the USB monitor daemon. Default: 50 + +config SYSTEM_USBMONITOR_INTERVAL + int "USB Monitor dump frequency" + default 2 + ---help--- + The rate in seconds that the USB monitor will wait before dumping + the next set of buffered USB trace data. Default: 2 seconds. + +config SYSTEM_USBMONITOR_TRACEINIT + bool "Show initialization events" + default n + ---help--- + Show initialization events + +config SYSTEM_USBMONITOR_TRACECLASS + bool "Show class driver events" + default n + ---help--- + Show class driver events + +config SYSTEM_USBMONITOR_TRACETRANSFERS + bool "Show data transfer events" + default n + ---help--- + Show data transfer events + +config SYSTEM_USBMONITOR_TRACECONTROLLER + bool "Show controller events" + default n + ---help--- + Show controller events + +config SYSTEM_USBMONITOR_TRACEINTERRUPTS + bool "Show interrupt-related events" + default n + ---help--- + Show interrupt-related events +endif + diff --git a/apps/system/usbmonitor/Makefile b/apps/system/usbmonitor/Makefile new file mode 100644 index 000000000..56b6ccee1 --- /dev/null +++ b/apps/system/usbmonitor/Makefile @@ -0,0 +1,117 @@ +############################################################################ +# apps/system/usbmonitor/Makefile +# +# Copyright (C) 2013 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +-include $(TOPDIR)/.config +-include $(TOPDIR)/Make.defs +include $(APPDIR)/Make.defs + +ifeq ($(WINTOOL),y) +INCDIROPT = -w +endif + +# USB Monitor Application + +PRIORITY = SCHED_PRIORITY_DEFAULT +STACKSIZE = 768 + +ASRCS = +CSRCS = usbmonitor.c + +AOBJS = $(ASRCS:.S=$(OBJEXT)) +COBJS = $(CSRCS:.c=$(OBJEXT)) + +SRCS = $(ASRCS) $(CSRCS) +OBJS = $(AOBJS) $(COBJS) + +ifeq ($(CONFIG_WINDOWS_NATIVE),y) + BIN = ..\..\libapps$(LIBEXT) +else +ifeq ($(WINTOOL),y) + BIN = ..\\..\\libapps$(LIBEXT) +else + BIN = ../../libapps$(LIBEXT) +endif +endif + +ROOTDEPPATH = --dep-path . + +# Common build + +VPATH = + +all: .built +.PHONY: context depend clean distclean + +$(AOBJS): %$(OBJEXT): %.S + $(call ASSEMBLE, $<, $@) + +$(COBJS): %$(OBJEXT): %.c + $(call COMPILE, $<, $@) + +.built: $(OBJS) + $(call ARCHIVE, $(BIN), $(OBJS)) + $(Q) touch .built + +# Register application + +ifeq ($(CONFIG_NSH_BUILTIN_APPS),y) +$(BUILTIN_REGISTRY)$(DELIM)usbmonitor_start.bdat: $(DEPCONFIG) Makefile + $(call REGISTER,"usbmon_start",$(PRIORITY),$(STACKSIZE),usbmonitor_start) + +$(BUILTIN_REGISTRY)$(DELIM)usbmonitor_stop.bdat: $(DEPCONFIG) Makefile + $(call REGISTER,"usbmon_stop",$(PRIORITY),$(STACKSIZE),usbmonitor_stop) + +context: $(BUILTIN_REGISTRY)$(DELIM)usbmonitor_start.bdat $(BUILTIN_REGISTRY)$(DELIM)usbmonitor_stop.bdat +else +context: +endif + +# Create dependencies + +.depend: Makefile $(SRCS) + $(Q) $(MKDEP) $(ROOTDEPPATH) "$(CC)" -- $(CFLAGS) -- $(SRCS) >Make.dep + $(Q) touch $@ + +depend: .depend + +clean: + $(call DELFILE, .built) + $(call CLEAN) + +distclean: clean + $(call DELFILE, Make.dep) + $(call DELFILE, .depend) + +-include Make.dep diff --git a/apps/system/usbmonitor/usbmonitor.c b/apps/system/usbmonitor/usbmonitor.c new file mode 100644 index 000000000..cde945b43 --- /dev/null +++ b/apps/system/usbmonitor/usbmonitor.c @@ -0,0 +1,234 @@ +/**************************************************************************** + * apps/system/usbmonitor/usbmonitor.c + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> +#include <nuttx/progmem.h> + +#include <sys/types.h> +#include <stdbool.h> +#include <unistd.h> +#include <sched.h> +#include <syslog.h> +#include <errno.h> + +#include <nuttx/usb/usbdev_trace.h> + +#ifdef CONFIG_SYSTEM_USBMONITOR + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +#define USBMON_PREFIX "USB Monitor: " + +/* Configuration ************************************************************/ + +#ifndef CONFIG_SYSTEM_USBMONITOR_STACKSIZE +# define CONFIG_SYSTEM_USBMONITOR_STACKSIZE 2048 +#endif + +#ifndef CONFIG_SYSTEM_USBMONITOR_PRIORITY +# define CONFIG_SYSTEM_USBMONITOR_PRIORITY 50 +#endif + +#ifndef CONFIG_SYSTEM_USBMONITOR_INTERVAL +# define CONFIG_SYSTEM_USBMONITOR_INTERVAL 2 +#endif + +#ifdef CONFIG_SYSTEM_USBMONITOR_TRACEINIT +# define TRACE_INIT_BITS (TRACE_INIT_BIT) +#else +# define TRACE_INIT_BITS (0) +#endif + +#define TRACE_ERROR_BITS (TRACE_DEVERROR_BIT|TRACE_CLSERROR_BIT) + +#ifdef CONFIG_SYSTEM_USBMONITOR_TRACECLASS +# define TRACE_CLASS_BITS (TRACE_CLASS_BIT|TRACE_CLASSAPI_BIT|\ + TRACE_CLASSSTATE_BIT) +#else +# define TRACE_CLASS_BITS (0) +#endif + +#ifdef CONFIG_SYSTEM_USBMONITOR_TRACETRANSFERS +# define TRACE_TRANSFER_BITS (TRACE_OUTREQQUEUED_BIT|TRACE_INREQQUEUED_BIT|\ + TRACE_READ_BIT|TRACE_WRITE_BIT|\ + TRACE_COMPLETE_BIT) +#else +# define TRACE_TRANSFER_BITS (0) +#endif + +#ifdef CONFIG_SYSTEM_USBMONITOR_TRACECONTROLLER +# define TRACE_CONTROLLER_BITS (TRACE_EP_BIT|TRACE_DEV_BIT) +#else +# define TRACE_CONTROLLER_BITS (0) +#endif + +#ifdef CONFIG_SYSTEM_USBMONITOR_TRACEINTERRUPTS +# define TRACE_INTERRUPT_BITS (TRACE_INTENTRY_BIT|TRACE_INTDECODE_BIT|\ + TRACE_INTEXIT_BIT) +#else +# define TRACE_INTERRUPT_BITS (0) +#endif + +#define TRACE_BITSET (TRACE_INIT_BITS|TRACE_ERROR_BITS|\ + TRACE_CLASS_BITS|TRACE_TRANSFER_BITS|\ + TRACE_CONTROLLER_BITS|TRACE_INTERRUPT_BITS) + +/**************************************************************************** + * Private Types + ****************************************************************************/ + +struct usbmon_state_s +{ + volatile bool started; + volatile bool stop; + pid_t pid; +}; + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +static struct usbmon_state_s g_usbmonitor; + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +static int usbmonitor_tracecallback(struct usbtrace_s *trace, void *arg) +{ + usbtrace_trprintf((trprintf_t)syslog, trace->event, trace->value); + return 0; +} + +static int usbmonitor_daemon(int argc, char **argv) +{ + syslog(USBMON_PREFIX "Running: %d\n", g_usbmonitor.pid); + + /* Loop until we detect that there is a request to stop. */ + + while (!g_usbmonitor.stop) + { + sleep(CONFIG_SYSTEM_USBMONITOR_INTERVAL); + (void)usbtrace_enumerate(usbmonitor_tracecallback, NULL); + } + + /* Stopped */ + + g_usbmonitor.stop = false; + g_usbmonitor.started = false; + syslog(USBMON_PREFIX "Stopped: %d\n", g_usbmonitor.pid); + + return 0; +} + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +int usbmonitor_start(int argc, char **argv) +{ + /* Has the monitor already started? */ + + sched_lock(); + if (!g_usbmonitor.started) + { + int ret; + + /* No.. start it now */ + + /* First, initialize any USB tracing options that were requested */ + + usbtrace_enable(TRACE_BITSET); + + /* Then start the USB monitoring daemon */ + + g_usbmonitor.started = true; + g_usbmonitor.stop = false; + + ret = TASK_CREATE("USB Monitor", CONFIG_SYSTEM_USBMONITOR_PRIORITY, + CONFIG_SYSTEM_USBMONITOR_STACKSIZE, + (main_t)usbmonitor_daemon, (const char **)NULL); + if (ret < 0) + { + int errcode = errno; + syslog(USBMON_PREFIX + "ERROR: Failed to start the USB monitor: %d\n", + errcode); + } + else + { + g_usbmonitor.pid = ret; + syslog(USBMON_PREFIX "Started: %d\n", g_usbmonitor.pid); + } + + sched_unlock(); + return 0; + } + + sched_unlock(); + syslog(USBMON_PREFIX "%s: %d\n", + g_usbmonitor.stop ? "Stopping" : "Running", g_usbmonitor.pid); + return 0; +} + +int usbmonitor_stop(int argc, char **argv) +{ + /* Has the monitor already started? */ + + if (g_usbmonitor.started) + { + /* Stop the USB monitor. The next time the monitor wakes up, + * it will see the the stop indication and will exist. + */ + + syslog(USBMON_PREFIX "Stopping: %d\n", g_usbmonitor.pid); + g_usbmonitor.stop = true; + + /* We may as well disable tracing since there is no listener */ + + usbtrace_enable(0); + } + + syslog(USBMON_PREFIX "Stopped: %d\n", g_usbmonitor.pid); + return 0; +} + +#endif /* CONFIG_SYSTEM_USBMONITOR */ |