|
|
/************************************************************************************
* arch/arm/src/lpc17xx/lpc17_can.h
*
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_LPC17XX_LPC17_CAN_H
#define __ARCH_ARM_SRC_LPC17XX_LPC17_CAN_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include "chip.h"
#include "lpc17_memorymap.h"
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Register offsets *****************************************************************/
/* CAN acceptance filter registers */
#define LPC17_CANAF_AFMR_OFFSET 0x0000 /* Acceptance Filter Register */
#define LPC17_CANAF_SFFSA_OFFSET 0x0004 /* Standard Frame Individual Start Address Register */
#define LPC17_CANAF_SFFGRPSA_OFFSET 0x0008 /* Standard Frame Group Start Address Register */
#define LPC17_CANAF_EFFSA_OFFSET 0x000c /* Extended Frame Start Address Register */
#define LPC17_CANAF_EFFGRPSA_OFFSET 0x0010 /* Extended Frame Group Start Address Register */
#define LPC17_CANAF_EOT_OFFSET 0x0014 /* End of AF Tables register */
#define LPC17_CANAF_LUTERRAD_OFFSET 0x0018 /* LUT Error Address register */
#define LPC17_CANAF_LUTERR_OFFSET 0x001c /* LUT Error Register */
#define LPC17_CANAF_FCANIE_OFFSET 0x0020 /* FullCAN interrupt enable register */
#define LPC17_CANAF_FCANIC0_OFFSET 0x0024 /* FullCAN interrupt and capture register 0 */
#define LPC17_CANAF_FCANIC1_OFFSET 0x0028 /* FullCAN interrupt and capture register 1 */
/* Central CAN registers */
#define LPC17_CAN_TXSR_OFFSET 0x0000 /* CAN Central Transmit Status Register */
#define LPC17_CAN_RXSR_OFFSET 0x0004 /* CAN Central Receive Status Register */
#define LPC17_CAN_MSR_OFFSET 0x0008 /* CAN Central Miscellaneous Register */
/* CAN1/2 registers */
#define LPC17_CAN_MOD_OFFSET 0x0000 /* CAN operating mode */
#define LPC17_CAN_CMR_OFFSET 0x0004 /* Command bits */
#define LPC17_CAN_GSR_OFFSET 0x0008 /* Controller Status and Error Counters */
#define LPC17_CAN_ICR_OFFSET 0x000c /* Interrupt and capure register */
#define LPC17_CAN_IER_OFFSET 0x0010 /* Interrupt Enable */
#define LPC17_CAN_BTR_OFFSET 0x0014 /* Bus Timing */
#define LPC17_CAN_EWL_OFFSET 0x0018 /* Error Warning Limit */
#define LPC17_CAN_SR_OFFSET 0x001c /* Status Register */
#define LPC17_CAN_RFS_OFFSET 0x0020 /* Receive frame status */
#define LPC17_CAN_RID_OFFSET 0x0024 /* Received Identifier */
#define LPC17_CAN_RDA_OFFSET 0x0028 /* Received data bytes 1-4 */
#define LPC17_CAN_RDB_OFFSET 0x002c /* Received data bytes 5-8 */
#define LPC17_CAN_TFI1_OFFSET 0x0030 /* Transmit frame info (Tx Buffer 1) */
#define LPC17_CAN_TID1_OFFSET 0x0034 /* Transmit Identifier (Tx Buffer 1) */
#define LPC17_CAN_TDA1_OFFSET 0x0038 /* Transmit data bytes 1-4 (Tx Buffer 1) */
#define LPC17_CAN_TDB1_OFFSET 0x003c /* Transmit data bytes 5-8 (Tx Buffer 1) */
#define LPC17_CAN_TFI2_OFFSET 0x0040 /* Transmit frame info (Tx Buffer 2) */
#define LPC17_CAN_TID2_OFFSET 0x0044 /* Transmit Identifier (Tx Buffer 2) */
#define LPC17_CAN_TDA2_OFFSET 0x0048 /* Transmit data bytes 1-4 (Tx Buffer 2) */
#define LPC17_CAN_TDB2_OFFSET 0x004c /* Transmit data bytes 5-8 (Tx Buffer 2) */
#define LPC17_CAN_TFI3_OFFSET 0x0050 /* Transmit frame info (Tx Buffer 3) */
#define LPC17_CAN_TID3_OFFSET 0x0054 /* Transmit Identifier (Tx Buffer 3) */
#define LPC17_CAN_TDA3_OFFSET 0x0058 /* Transmit data bytes 1-4 (Tx Buffer 3) */
#define LPC17_CAN_TDB3_OFFSET 0x005c /* Transmit data bytes 5-8 (Tx Buffer 3) */
/* Register addresses ***************************************************************/
/* CAN acceptance filter registers */
#define LPC17_CANAF_AFMR (LPC17_CANAF_BASE+LPC17_CANAF_AFMR_OFFSET)
#define LPC17_CANAF_SFFSA (LPC17_CANAF_BASE+LPC17_CANAF_SFFSA_OFFSET)
#define LPC17_CANAF_SFFGRPSA (LPC17_CANAF_BASE+LPC17_CANAF_SFFGRPSA_OFFSET)
#define LPC17_CANAF_EFFSA (LPC17_CANAF_BASE+LPC17_CANAF_EFFSA_OFFSET)
#define LPC17_CANAF_EFFGRPSA (LPC17_CANAF_BASE+LPC17_CANAF_EFFGRPSA_OFFSET)
#define LPC17_CANAF_EOT (LPC17_CANAF_BASE+LPC17_CANAF_EOT_OFFSET)
#define LPC17_CANAF_LUTERRAD (LPC17_CANAF_BASE+LPC17_CANAF_LUTERRAD_OFFSET)
#define LPC17_CANAF_LUTERR (LPC17_CANAF_BASE+LPC17_CANAF_LUTERR_OFFSET)
#define LPC17_CANAF_FCANIE (LPC17_CANAF_BASE+LPC17_CANAF_FCANIE_OFFSET)
#define LPC17_CANAF_FCANIC0 (LPC17_CANAF_BASE+LPC17_CANAF_FCANIC0_OFFSET)
#define LPC17_CANAF_FCANIC1 (LPC17_CANAF_BASE+LPC17_CANAF_FCANIC1_OFFSET)
/* Central CAN registers */
#define LPC17_CAN_TXSR (LPC17_CAN_BASE+LPC17_CAN_TXSR_OFFSET)
#define LPC17_CAN_RXSR (LPC17_CAN_BASE+LPC17_CAN_RXSR_OFFSET)
#define LPC17_CAN_MSR (LPC17_CAN_BASE+LPC17_CAN_MSR_OFFSET)
/* CAN1/2 registers */
#define LPC17_CAN1_MOD (LPC17_CAN1_BASE+LPC17_CAN_MOD_OFFSET)
#define LPC17_CAN1_CMR (LPC17_CAN1_BASE+LPC17_CAN_CMR_OFFSET)
#define LPC17_CAN1_GSR (LPC17_CAN1_BASE+LPC17_CAN_GSR_OFFSET)
#define LPC17_CAN1_ICR (LPC17_CAN1_BASE+LPC17_CAN_ICR_OFFSET)
#define LPC17_CAN1_IER (LPC17_CAN1_BASE+LPC17_CAN_IER_OFFSET)
#define LPC17_CAN1_BTR (LPC17_CAN1_BASE+LPC17_CAN_BTR_OFFSET)
#define LPC17_CAN1_EWL (LPC17_CAN1_BASE+LPC17_CAN_EWL_OFFSET)
#define LPC17_CAN1_SR (LPC17_CAN1_BASE+LPC17_CAN_SR_OFFSET)
#define LPC17_CAN1_RFS (LPC17_CAN1_BASE+LPC17_CAN_RFS_OFFSET)
#define LPC17_CAN1_RID (LPC17_CAN1_BASE+LPC17_CAN_RID_OFFSET)
#define LPC17_CAN1_RDA (LPC17_CAN1_BASE+LPC17_CAN_RDA_OFFSET)
#define LPC17_CAN1_RDB (LPC17_CAN1_BASE+LPC17_CAN_RDB_OFFSET)
#define LPC17_CAN1_TFI1 (LPC17_CAN1_BASE+LPC17_CAN_TFI1_OFFSET)
#define LPC17_CAN1_TID1 (LPC17_CAN1_BASE+LPC17_CAN_TID1_OFFSET)
#define LPC17_CAN1_TDA1 (LPC17_CAN1_BASE+LPC17_CAN_TDA1_OFFSET)
#define LPC17_CAN1_TDB1 (LPC17_CAN1_BASE+LPC17_CAN_TDB1_OFFSET)
#define LPC17_CAN1_TFI2 (LPC17_CAN1_BASE+LPC17_CAN_TFI2_OFFSET)
#define LPC17_CAN1_TID2 (LPC17_CAN1_BASE+LPC17_CAN_TID2_OFFSET)
#define LPC17_CAN1_TDA2 (LPC17_CAN1_BASE+LPC17_CAN_TDA2_OFFSET)
#define LPC17_CAN1_TDB2 (LPC17_CAN1_BASE+LPC17_CAN_TDB2_OFFSET)
#define LPC17_CAN1_TFI3 (LPC17_CAN1_BASE+LPC17_CAN_TFI3_OFFSET)
#define LPC17_CAN1_TID3 (LPC17_CAN1_BASE+LPC17_CAN_TID3_OFFSET)
#define LPC17_CAN1_TDA3 (LPC17_CAN1_BASE+LPC17_CAN_TDA3_OFFSET)
#define LPC17_CAN1_TDB3 (LPC17_CAN1_BASE+LPC17_CAN_TDB3_OFFSET)
#define LPC17_CAN2_MOD (LPC17_CAN2_BASE+LPC17_CAN_MOD_OFFSET)
#define LPC17_CAN2_CMR (LPC17_CAN2_BASE+LPC17_CAN_CMR_OFFSET)
#define LPC17_CAN2_GSR (LPC17_CAN2_BASE+LPC17_CAN_GSR_OFFSET)
#define LPC17_CAN2_ICR (LPC17_CAN2_BASE+LPC17_CAN_ICR_OFFSET)
#define LPC17_CAN2_IER (LPC17_CAN2_BASE+LPC17_CAN_IER_OFFSET)
#define LPC17_CAN2_BTR (LPC17_CAN2_BASE+LPC17_CAN_BTR_OFFSET)
#define LPC17_CAN2_EWL (LPC17_CAN2_BASE+LPC17_CAN_EWL_OFFSET)
#define LPC17_CAN2_SR (LPC17_CAN2_BASE+LPC17_CAN_SR_OFFSET)
#define LPC17_CAN2_RFS (LPC17_CAN2_BASE+LPC17_CAN_RFS_OFFSET)
#define LPC17_CAN2_RID (LPC17_CAN2_BASE+LPC17_CAN_RID_OFFSET)
#define LPC17_CAN2_RDA (LPC17_CAN2_BASE+LPC17_CAN_RDA_OFFSET)
#define LPC17_CAN2_RDB (LPC17_CAN2_BASE+LPC17_CAN_RDB_OFFSET)
#define LPC17_CAN2_TFI1 (LPC17_CAN2_BASE+LPC17_CAN_TFI1_OFFSET)
#define LPC17_CAN2_TID1 (LPC17_CAN2_BASE+LPC17_CAN_TID1_OFFSET)
#define LPC17_CAN2_TDA1 (LPC17_CAN2_BASE+LPC17_CAN_TDA1_OFFSET)
#define LPC17_CAN2_TDB1 (LPC17_CAN2_BASE+LPC17_CAN_TDB1_OFFSET)
#define LPC17_CAN2_TFI2 (LPC17_CAN2_BASE+LPC17_CAN_TFI2_OFFSET)
#define LPC17_CAN2_TID2 (LPC17_CAN2_BASE+LPC17_CAN_TID2_OFFSET)
#define LPC17_CAN2_TDA2 (LPC17_CAN2_BASE+LPC17_CAN_TDA2_OFFSET)
#define LPC17_CAN2_TDB2 (LPC17_CAN2_BASE+LPC17_CAN_TDB2_OFFSET)
#define LPC17_CAN2_TFI3 (LPC17_CAN2_BASE+LPC17_CAN_TFI3_OFFSET)
#define LPC17_CAN2_TID3 (LPC17_CAN2_BASE+LPC17_CAN_TID3_OFFSET)
#define LPC17_CAN2_TDA3 (LPC17_CAN2_BASE+LPC17_CAN_TDA3_OFFSET)
#define LPC17_CAN2_TDB3 (LPC17_CAN2_BASE+LPC17_CAN_TDB3_OFFSET)
/* Register bit definitions *********************************************************/
/* CAN acceptance filter registers */
/* Acceptance Filter Register */
#define CANAF_AFMR_ACCOFF (1 << 0) /* Bit 0: AF non-operational; All RX messages ignored */
#define CANAF_AFMR_ACCBP (1 << 1) /* Bit 1: AF bypass: All RX messages accepted */
#define CANAF_AFMR_EFCAN (1 << 2) /* Bit 2: Enable Full CAN mode */
/* Bits 3-31: Reserved */
/* Standard Frame Individual Start Address Register */
/* Bits 0-1: Reserved */
#define CANAF_SFFSA_SHIFT (2) /* Bits 2-10: Address of Standard Identifiers in AF Lookup RAM */
#define CANAF_SFFSA_MASK (0x01ff << CANAF_SFFSA_SHIFT)
/* Bits 11-31: Reserved */
/* Standard Frame Group Start Address Register */
/* Bits 0-1: Reserved */
#define CANAF_SFFGRPSA_SHIFT (2) /* Bits 2-10: Address of grouped Standard Identifiers in AF Lookup RAM */
#define CANAF_SFFGRPSA_MASK (0x01ff << CANAF_SFFGRPSA_SHIFT)
/* Bits 11-31: Reserved */
/* Extended Frame Start Address Register */
/* Bits 0-1: Reserved */
#define CANAF_EFFSA_SHIFT (2) /* Bits 2-10: Address of Extended Identifiers in AF Lookup RAM */
#define CANAF_EFFSA_MASK (0x01ff << CANAF_EFFSA_SHIFT)
/* Bits 11-31: Reserved */
/* Extended Frame Group Start Address Register */
/* Bits 0-1: Reserved */
#define CANAF_EFFGRPSA_SHIFT (2) /* Bits 2-10: Address of grouped Extended Identifiers in AF Lookup RAM */
#define CANAF_EFFGRPSA_MASK (0x01ff << CANAF_EFFGRPSA_SHIFT)
/* Bits 11-31: Reserved */
/* End of AF Tables register */
/* Bits 0-1: Reserved */
#define CANAF_EOT_SHIFT (2) /* Bits 2-10: Last active address in last active AF table */
#define CANAF_EOT_MASK (0x01ff << CANAF_EOT_SHIFT)
/* Bits 11-31: Reserved */
/* LUT Error Address register */
/* Bits 0-1: Reserved */
#define CANAF_LUTERRAD_SHIFT (2) /* Bits 2-10: Address in AF Lookup RAM of error */
#define CANAF_LUTERRAD_MASK (0x01ff << CANAF_EOT_SHIFT)
/* Bits 11-31: Reserved */
/* LUT Error Register */
#define CANAF_LUTERR_LUTERR (1 << 0) /* Bit 0: AF error in AF RAM tables */
/* Bits 1-31: Reserved */
/* FullCAN interrupt enable register */
#define CANAF_FCANIE_FCANIE (1 << 0) /* Bit 0: Global FullCAN Interrupt Enable */
/* Bits 1-31: Reserved */
/* FullCAN interrupt and capture register 0 */
#define CANAF_FCANIC0_INTPND(n) (1 << (n)) /* n=0,1,2,... 31 */
/* FullCAN interrupt and capture register 1 */
#define CANAF_FCANIC1_INTPND(n) (1 << ((n)-32)) /* n=32,33,...63 */
/* Central CAN registers */
/* CAN Central Transmit Status Register */
#define CAN_TXSR_TS1 (1 << 0) /* Bit 0: CAN1 sending */
#define CAN_TXSR_TS2 (1 << 1) /* Bit 1: CAN2 sending */
/* Bits 2-7: Reserved */
#define CAN_TXSR_TBS1 (1 << 8) /* Bit 8: All 3 CAN1 TX buffers available */
#define CAN_TXSR_TBS2 (1 << 9) /* Bit 9: All 3 CAN2 TX buffers available */
/* Bits 10-15: Reserved */
#define CAN_TXSR_TCS1 (1 << 16) /* Bit 16: All CAN1 xmissions completed */
#define CAN_TXSR_TCS2 (1 << 17) /* Bit 17: All CAN2 xmissions completed */
/* Bits 18-31: Reserved */
/* CAN Central Receive Status Register */
#define CAN_RXSR_RS1 (1 << 0) /* Bit 0: CAN1 receiving */
#define CAN_RXSR_RS2 (1 << 1) /* Bit 1: CAN2 receiving */
/* Bits 2-7: Reserved */
#define CAN_RXSR_RB1 (1 << 8) /* Bit 8: CAN1 received message available */
#define CAN_RXSR_RB2 (1 << 9) /* Bit 9: CAN2 received message available */
/* Bits 10-15: Reserved */
#define CAN_RXSR_DOS1 (1 << 16) /* Bit 16: All CAN1 message lost */
#define CAN_RXSR_DOS2 (1 << 17) /* Bit 17: All CAN2 message lost */
/* Bits 18-31: Reserved */
/* CAN Central Miscellaneous Register */
#define CAN_MSR_E1 (1 << 0) /* Bit 0: CAN1 error counters at limit */
#define CAN_MSR_E2 (1 << 1) /* Bit 1: CAN2 error counters at limit */
/* Bits 2-7: Reserved */
#define CAN_MSR_BS1 (1 << 8) /* Bit 8: CAN1 busy */
#define CAN_MSR_BS2 (1 << 9) /* Bit 7: CAN2 busy */
/* Bits 10-31: Reserved */
/* CAN1/2 registers */
/* CAN operating mode */
#define CAN_MOD_RM (1 << 0) /* Bit 0: Reset Mode */
#define CAN_MOD_LOM (1 << 1) /* Bit 1: Listen Only Mode */
#define CAN_MOD_STM (1 << 2) /* Bit 2: Self Test Mode */
#define CAN_MOD_TPM (1 << 3) /* Bit 3: Transmit Priority Mode */
#define CAN_MOD_SM (1 << 4) /* Bit 4: Sleep Mode */
#define CAN_MOD_RPM (1 << 5) /* Bit 5: Receive Polarity Mode */
/* Bit 6: Reserved */
#define CAN_MOD_TM (1 << 7) /* Bit 7: Test Mode */
/* Bits 8-31: Reserved */
/* Command bits */
#define CAN_CMR_TR (1 << 0) /* Bit 0: Transmission Request */
#define CAN_CMR_AT (1 << 1) /* Bit 1: Abort Transmission */
#define CAN_CMR_RRB (1 << 2) /* Bit 2: Release Receive Buffer */
#define CAN_CMR_CDO (1 << 3) /* Bit 3: Clear Data Overrun */
#define CAN_CMR_SRR (1 << 4) /* Bit 4: Self Reception Request */
#define CAN_CMR_STB1 (1 << 5) /* Bit 5: Select Tx Buffer 1 */
#define CAN_CMR_STB2 (1 << 6) /* Bit 6: Select Tx Buffer 2 */
#define CAN_CMR_STB3 (1 << 7) /* Bit 7: Select Tx Buffer 3 */
/* Bits 8-31: Reserved */
/* Controller Status and Error Counters */
#define CAN_GSR_RBS (1 << 0) /* Bit 0: Receive Buffer Status */
#define CAN_GSR_DOS (1 << 1) /* Bit 1: Data Overrun Status */
#define CAN_GSR_TBS (1 << 2) /* Bit 2: Transmit Buffer Status */
#define CAN_GSR_TCS (1 << 3) /* Bit 3: Transmit Complete Status */
#define CAN_GSR_RS (1 << 4) /* Bit 4: Receive Status */
#define CAN_GSR_TS (1 << 5) /* Bit 5: Transmit Status */
#define CAN_GSR_ES (1 << 6) /* Bit 6: Error Status */
#define CAN_GSR_BS (1 << 7) /* Bit 7: Bus Status */
/* Bits 8-15: Reserved */
#define CAN_GSR_RXERR_SHIFT (16) /* Bits 16-23: Rx Error Counter */
#define CAN_GSR_RXERR_MASK (0xff << CAN_GSR_RXERR_SHIFT)
#define CAN_GSR_TXERR_SHIFT (24) /* Bits 24-31: Tx Error Counter */
#define CAN_GSR_TXERR_MASK (0xff << CAN_GSR_TXERR_SHIFT)
/* Interrupt and capure register */
#define CAN_ICR_RI (1 << 0) /* Bit 0: Receive Interrupt */
#define CAN_ICR_TI1 (1 << 1) /* Bit 1: Transmit Interrupt 1 */
#define CAN_ICR_EI (1 << 2) /* Bit 2: Error Warning Interrupt */
#define CAN_ICR_DOI (1 << 3) /* Bit 3: Data Overrun Interrupt */
#define CAN_ICR_WUI (1 << 4) /* Bit 4: Wake-Up Interrupt */
#define CAN_ICR_EPI (1 << 5) /* Bit 5: Error Passive Interrupt */
#define CAN_ICR_ALI (1 << 6) /* Bit 6: Arbitration Lost Interrupt */
#define CAN_ICR_BEI (1 << 7) /* Bit 7: Bus Error Interrupt */
#define CAN_ICR_IDI (1 << 8) /* Bit 8: ID Ready Interrupt */
#define CAN_ICR_TI2 (1 << 9) /* Bit 9: Transmit Interrupt 2 */
#define CAN_ICR_TI3 (1 << 10) /* Bit 10: Transmit Interrupt 3 */
/* Bits 11-15: Reserved */
#define CAN_ICR_ERRBIT_SHIFT (16) /* Bits 16-20: Error Code Capture */
#define CAN_ICR_ERRBIT_MASK (0x1f << CAN_ICR_ERRBIT_SHIFT)
# define CAN_ICR_ERRBIT_SOF (3 << CAN_ICR_ERRBIT_SHIFT) /* Start of Frame */
# define CAN_ICR_ERRBIT_ID28 (2 << CAN_ICR_ERRBIT_SHIFT) /* ID28 ... ID21 */
# define CAN_ICR_ERRBIT_SRTR (4 << CAN_ICR_ERRBIT_SHIFT) /* SRTR Bit */
# define CAN_ICR_ERRBIT_IDE (5 << CAN_ICR_ERRBIT_SHIFT) /* DE bit */
# define CAN_ICR_ERRBIT_ID20 (6 << CAN_ICR_ERRBIT_SHIFT) /* ID20 ... ID18 */
# define CAN_ICR_ERRBIT_ID17 (7 << CAN_ICR_ERRBIT_SHIFT) /* ID17 ... 13 */
# define CAN_ICR_ERRBIT_CRC (8 << CAN_ICR_ERRBIT_SHIFT) /* CRC Sequence */
# define CAN_ICR_ERRBIT_DATA (10 << CAN_ICR_ERRBIT_SHIFT) /* Data Field */
# define CAN_ICR_ERRBIT_LEN (11 << CAN_ICR_ERRBIT_SHIFT) /* Data Length Code */
# define CAN_ICR_ERRBIT_ RTR (12 << CAN_ICR_ERRBIT_SHIFT) /* RTR Bit */
# define CAN_ICR_ERRBIT_ID4 (14 << CAN_ICR_ERRBIT_SHIFT) /* ID4 ... ID0 */
# define CAN_ICR_ERRBIT_ID12 (15 << CAN_ICR_ERRBIT_SHIFT) /* ID12 ... ID5 */
# define CAN_ICR_ERRBIT_AERR (17 << CAN_ICR_ERRBIT_SHIFT) /* Active Error Flag */
# define CAN_ICR_ERRBIT_INTERMSN (18 << CAN_ICR_ERRBIT_SHIFT) /* Intermission */
# define CAN_ICR_ERRBIT_DOM (19 << CAN_ICR_ERRBIT_SHIFT) /* Tolerate Dominant Bits */
# define CAN_ICR_ERRBIT_PERR (22 << CAN_ICR_ERRBIT_SHIFT) /* Passive Error Flag */
# define CAN_ICR_ERRBIT_ERRDLM (23 << CAN_ICR_ERRBIT_SHIFT) /* Error Delimiter */
# define CAN_ICR_ERRBIT_CRCDLM (24 << CAN_ICR_ERRBIT_SHIFT) /* CRC Delimiter */
# define CAN_ICR_ERRBIT_ACKSLT (25 << CAN_ICR_ERRBIT_SHIFT) /* Acknowledge Slot */
# define CAN_ICR_ERRBIT_EOF (26 << CAN_ICR_ERRBIT_SHIFT) /* End of Frame */
# define CAN_ICR_ERRBIT_ACKDLM (27 << CAN_ICR_ERRBIT_SHIFT) /* Acknowledge Delimiter */
# define CAN_ICR_ERRBIT_OVLD (28 << CAN_ICR_ERRBIT_SHIFT) /* Overload flag */
#define CAN_ICR_ERRDIR (1 << 21) /* Bit 21: Direction bit at time of error */
#define CAN_ICR_ERRC_SHIFT (22) /* Bits 22-23: Type of error */
#define CAN_ICR_ERRC_MASK (3 << CAN_ICR_ERRC_SHIFT)
# define CAN_ICR_ERRC_BIT (0 << CAN_ICR_ERRC_SHIFT)
# define CAN_ICR_ERRC_FORM (1 << CAN_ICR_ERRC_SHIFT)
# define CAN_ICR_ERRC_STUFF (2 << CAN_ICR_ERRC_SHIFT)
# define CAN_ICR_ERRC_OTHER (3 << CAN_ICR_ERRC_SHIFT)
#define CAN_ICR_ALCBIT_SHIFT (24) /* Bits 24-31: Bit number within frame */
#define CAN_ICR_ALCBIT_MASK (0xff << CAN_ICR_ALCBIT_SHIFT)
/* Interrupt Enable */
#define CAN_IER_RIE (1 << 0) /* Bit 0: Receiver Interrupt Enable */
#define CAN_IER_TIE1 (1 << 1) /* Bit 1: Transmit Interrupt Enable for Buffer1 */
#define CAN_IER_EIE (1 << 2) /* Bit 2: Error Warning Interrupt Enable */
#define CAN_IER_DOIE (1 << 3) /* Bit 3: Data Overrun Interrupt Enable */
#define CAN_IER_WUIE (1 << 4) /* Bit 4: Wake-Up Interrupt Enable */
#define CAN_IER_EPIE (1 << 5) /* Bit 5: Error Passive Interrupt Enable */
#define CAN_IER_ALIE (1 << 6) /* Bit 6: Arbitration Lost Interrupt Enable */
#define CAN_IER_BEIE (1 << 7) /* Bit 7: Bus Error Interrupt */
#define CAN_IER_IDIE (1 << 8) /* Bit 8: ID Ready Interrupt Enable */
#define CAN_IER_TIE2 (1 << 9) /* Bit 9: Transmit Interrupt Enable for Buffer2 */
#define CAN_IER_TIE3 (1 << 10) /* Bit 10: Transmit Interrupt Enable for Buffer3 */
/* Bits 11-31: Reserved */
/* Bus Timing */
#define CAN_BTR_BRP_SHIFT (0) /* Bits 0-9: Baud Rate Prescaler */
#define CAN_BTR_BRP_MASK (0x3ff << CAN_BTR_BRP_SHIFT)
/* Bits 10-13: Reserved */
#define CAN_BTR_SJW_SHIFT (14) /* Bits 14-15: Synchronization Jump Width */
#define CAN_BTR_SJW_MASK (3 << CAN_BTR_SJW_SHIFT)
#define CAN_BTR_TESG1_SHIFT (16) /* Bits 16-19: Sync to sample delay */
#define CAN_BTR_TESG1_MASK (15 << CAN_BTR_TESG1_SHIFT)
#define CAN_BTR_TESG2_SHIFT (20) /* Bits 20-22: smaple to next delay */
#define CAN_BTR_TESG2_MASK (7 << CAN_BTR_TESG2_SHIFT)
#define CAN_BTR_SAM (1 << 23) /* Bit 23: Sampling */
/* Bits 24-31: Reserved */
/* Error Warning Limit */
#define CAN_EWL_SHIFT (0) /* Bits 0-7: Error warning limit */
#define CAN_EWL_MASK (0xff << CAN_EWL_SHIFT)
/* Bits 8-31: Reserved */
/* Status Register */
#define CAN_SR_RBS1 (1 << 0) /* Bit 0: Receive Buffer Status */
#define CAN_SR_DOS1 (1 << 1) /* Bit 1: Data Overrun Status */
#define CAN_SR_TBS1 (1 << 2) /* Bit 2: Transmit Buffer Status 1 */
#define CAN_SR_TCS1 (1 << 3) /* Bit 3: Transmission Complete Status */
#define CAN_SR_RS1 (1 << 4) /* Bit 4: Receive Status */
#define CAN_SR_TS1 (1 << 5) /* Bit 5: Transmit Status 1 */
#define CAN_SR_ES1 (1 << 6) /* Bit 6: Error Status */
#define CAN_SR_BS1 (1 << 7) /* Bit 7: Bus Status */
#define CAN_SR_RBS2 (1 << 8) /* Bit 8: Receive Buffer Status */
#define CAN_SR_DOS2 (1 << 9) /* Bit 9: Data Overrun Status */
#define CAN_SR_TBS2 (1 << 10) /* Bit 10: Transmit Buffer Status 2 */
#define CAN_SR_TCS2 (1 << 11) /* Bit 11: Transmission Complete Status */
#define CAN_SR_RS2 (1 << 12) /* Bit 12: Receive Status */
#define CAN_SR_TS2 (1 << 13) /* Bit 13: Transmit Status 2 */
#define CAN_SR_ES2 (1 << 14) /* Bit 14: Error Status */
#define CAN_SR_BS2 (1 << 15) /* Bit 15: Bus Status */
#define CAN_SR_RBS3 (1 << 16) /* Bit 16: Receive Buffer Status */
#define CAN_SR_DOS3 (1 << 17) /* Bit 17: Data Overrun Status */
#define CAN_SR_TBS3 (1 << 18) /* Bit 18: Transmit Buffer Status 3 */
#define CAN_SR_TCS3 (1 << 19) /* Bit 19: Transmission Complete Status */
#define CAN_SR_RS3 (1 << 20) /* Bit 20: Receive Status */
#define CAN_SR_TS3 (1 << 21) /* Bit 21: Transmit Status 3 */
#define CAN_SR_ES3 (1 << 22) /* Bit 22: Error Status */
#define CAN_SR_BS3 (1 << 23) /* Bit 23: Bus Status */
/* Bits 24-31: Reserved */
/* Receive frame status */
#define CAN_RFS_ID_SHIFT (0) /* Bits 0-9: ID Index */
#define CAN_RFS_ID_MASK (0x03ff << CAN_RFS_ID_SHIFT)
#define CAN_RFS_BP (1 << 10) /* Bit 10: Received in AF Bypass mode */
/* Bits 11-15: Reserved */
#define CAN_RFS_DLC_SHIFT (16) /* Bits 16-19: Message Data Length Code (DLC) */
#define CAN_RFS_DLC_MASK (15 << yy)
/* Bits 20-29: Reserved */
#define CAN_RFS_RTR (1 << 30) /* Bit 30: Message Remote Transmission Request */
#define CAN_RFS_FF (1 << 31) /* Bit 31: Message 29-bit vs 11-bit ID */
/* Received Identifier */
#define CAN_RID_ID11_MASK (0x7ff) /* Bits 0-10: 11-bit Identifier (FF=0) */
/* Bits 11-31: Reserved */
#define CAN_RID_ID29_MASK (0x1fffffff) /* Bits 0-28: 29-bit Identifiter (FF=1) */
/* Bits 29-31: Reserved */
/* Received data bytes 1-4 */
#define CAN_RDA_DATA1_SHIFT (0) /* Bits 0-7: If CANRFS >= 1 */
#define CAN_RDA_DATA1_MASK (0x0ff << CAN_RDA_DATA1_SHIFT)
#define CAN_RDA_DATA2_SHIFT (8) /* Bits 8-15: If CANRFS >= 2 */
#define CAN_RDA_DATA2_MASK (0x0ff << CAN_RDA_DATA2_SHIFT)
#define CAN_RDA_DATA3_SHIFT (16) /* Bits 16-23: If CANRFS >= 3 */
#define CAN_RDA_DATA3_MASK (0x0ff << CAN_RDA_DATA3_SHIFT)
#define CAN_RDA_DATA4_SHIFT (24) /* Bits 24-31: If CANRFS >= 4 */
#define CAN_RDA_DATA4_MASK (0x0ff << CAN_RDA_DATA4_SHIFT)
/* Received data bytes 5-8 */
#define CAN_RDB_DATA5_SHIFT (0) /* Bits 0-7: If CANRFS >= 5 */
#define CAN_RDB_DATA5_MASK (0x0ff << CAN_RDB_DATA5_SHIFT)
#define CAN_RDB_DATA6_SHIFT (8) /* Bits 8-15: If CANRFS >= 6 */
#define CAN_RDB_DATA6_MASK (0x0ff << CAN_RDB_DATA6_SHIFT)
#define CAN_RDB_DATA7_SHIFT (16) /* Bits 16-23: If CANRFS >= 7 */
#define CAN_RDB_DATA7_MASK (0x0ff << CAN_RDB_DATA7_SHIFT)
#define CAN_RDB_DATA8_SHIFT (24) /* Bits 24-31: If CANRFS >= 8 */
#define CAN_RDB_DATA8_MASK (0x0ff << CAN_RDB_DATA8_SHIFT)
/* Transmit frame info (Tx Buffer 1), Transmit frame info (Tx Buffer 2), and
* Transmit frame info (Tx Buffer 3) common bit field definitions
*/
#define CAN_TFI_PRIO_SHIFT (0) /* Bits 0-7: TX buffer priority */
#define CAN_TFI_PRIO_MASK (0xff << CAN_TFI_PRIO_SHIFT)
/* Bits 8-15: Reserved */
#define CAN_TFI_DLC_SHIFT (16) /* Bits 16-19: TX Data Length Code */
#define CAN_TFI_DLC_MASK (15 << CAN_TFI_DLC_SHIFT)
/* Bits 20-29: Reserved */
#define CAN_TFI_RTR (1 << 30) /* Bit 30: TX RTR bit */
#define CAN_TFI_FF (1 << 31) /* Bit 31: Message 29-bit vs 11-bit ID */
/* Transmit Identifier (Tx Buffer 1), Transmit Identifier (Tx Buffer 2), and
* Transmit Identifier (Tx Buffer 3) common bit field definitions.
*/
#define CAN_TID_ID11_MASK (0x7ff) /* Bits 0-10: 11-bit Identifier (FF=0) */
/* Bits 11-31: Reserved */
#define CAN_TID_ID29_MASK (0x1fffffff) /* Bits 0-28: 29-bit Identifiter (FF=1) */
/* Bits 29-31: Reserved */
/* Transmit data bytes 1-4 (Tx Buffer 1), Transmit data bytes 1-4 (Tx Buffer 2), and
* Transmit data bytes 1-4 (Tx Buffer 3) common bit field definitions.
*/
#define CAN_TDA_DATA1_SHIFT (0) /* Bits 0-7: RTR=0 && DLC >= 1 */
#define CAN_TDA_DATA1_MASK (0x0ff << CAN_TDA_DATA1_SHIFT)
#define CAN_TDA_DATA2_SHIFT (8) /* Bits 8-15: RTR=0 && DLC >= 2 */
#define CAN_TDA_DATA2_MASK (0x0ff << CAN_TDA_DATA2_SHIFT)
#define CAN_TDA_DATA3_SHIFT (16) /* Bits 16-23: RTR=0 && DLC >= 3 */
#define CAN_TDA_DATA3_MASK (0x0ff << CAN_TDA_DATA3_SHIFT)
#define CAN_TDA_DATA4_SHIFT (24) /* Bits 24-31: RTR=0 && DLC >= 4 */
#define CAN_TDA_DATA4_MASK (0x0ff << CAN_TDA_DATA4_SHIFT)
/* Transmit data bytes 5-8 (Tx Buffer 1), Transmit data bytes 5-8 (Tx Buffer 2), and
* Transmit data bytes 5-8 (Tx Buffer 3) common bit field definitions.
*/
#define CAN_RDB_DATA5_SHIFT (0) /* Bits 0-7: RTR=0 && DLC >= 5 */
#define CAN_RDB_DATA5_MASK (0x0ff << CAN_RDB_DATA5_SHIFT)
#define CAN_RDB_DATA6_SHIFT (8) /* Bits 8-15: RTR=0 && DLC >= 6 */
#define CAN_RDB_DATA6_MASK (0x0ff << CAN_RDB_DATA6_SHIFT)
#define CAN_RDB_DATA7_SHIFT (16) /* Bits 16-23: RTR=0 && DLC >= 7 */
#define CAN_RDB_DATA7_MASK (0x0ff << CAN_RDB_DATA7_SHIFT)
#define CAN_RDB_DATA8_SHIFT (24) /* Bits 24-31: RTR=0 && DLC >= 8 */
#define CAN_RDB_DATA8_MASK (0x0ff << CAN_RDB_DATA8_SHIFT)
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
#endif /* __ARCH_ARM_SRC_LPC17XX_LPC17_CAN_H */
|