/****************************************************************************
* arch/mips/src/pic32mx/pic32mx-irq.c
* arch/mips/src/chip/pic32mx-irq.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/irq.h>
#include <nuttx/arch.h>
#include <arch/irq.h>
#include <arch/pic32mx/cp0.h>
#include "up_arch.h"
#include "os_internal.h"
#include "up_internal.h"
#include "pic32mx-int.h"
#include "pic32mx-internal.h"
/****************************************************************************
* Definitions
****************************************************************************/
/* Configuration ************************************************************/
#ifdef CONFIG_PIC32MX_MVEC
# error "Multi-vectors not supported"
#endif
/****************************************************************************
* Public Data
****************************************************************************/
volatile uint32_t *current_regs;
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_irqinitialize
****************************************************************************/
void up_irqinitialize(void)
{
uint32_t regval;
int irq;
/* Disable all interrupts */
putreg32(0xffff, PIC32MX_INT_IEC0CLR);
putreg32(0xffff, PIC32MX_INT_IEC1CLR);
#ifdef PIC32MX_INT_IEC2CLR
putreg32(0xffff, PIC32MX_INT_IEC2CLR);
#endif
/* Set all interrupts to the default (middle) priority */
for (irq = 0; irq < NR_IRQS; irq++)
{
(void)up_prioritize_irq(irq, (INT_ICP_MID_PRIORITY << 2));
}
/* Set the BEV bit in the STATUS register */
regval = cp0_getstatus();
regval |= CP0_STATUS_BEV;
cp0_putstatus(regval);
/* Set the EBASE value to the beginning of boot FLASH */
cp0_putebase(0xbfc00000);
/* Set the INTCTL vector spacing to non-zero */
cp0_putintctl(0x00000020);
/* Set the IV bit in the CAUSE register */
regval = cp0_getcause();
regval |= CP0_CAUSE_IV;
cp0_putcause(regval);
/* Clear the EXL bit in the STATUS register */
regval = cp0_getstatus();
regval &= ~CP0_STATUS_EXL;
cp0_putstatus(regval);
/* Configure multi- or single- vector interrupts */
#ifdef CONFIG_PIC32MX_MVEC
putreg32(INT_INTCON_MVEC, PIC32MX_INT_INTCONSET);
#else
putreg32(INT_INTCON_MVEC, PIC32MX_INT_INTCONCLR);
#endif
/* Initialize GPIO change notification handling */
#ifdef CONFIG_GPIO_IRQ
pic32mx_gpioirqinitialize();
#endif
/* Attach and enable software interrupts */
irq_attach(PIC32MX_IRQ_CS0, up_swint0);
up_enable_irq(PIC32MX_IRQSRC_CS0);
/* currents_regs is non-NULL only while processing an interrupt */
current_regs = NULL;
/* And finally, enable interrupts */
/* Interrupts are enabled by setting the IE bit in the CP0 status register */
regval = 0;
asm volatile("ei %0" : "=r"(regval));
#ifndef CONFIG_SUPPRESS_INTERRUPTS
/* Then enable all interrupt levels */
irqrestore(CP0_STATUS_IM_ALL);
#else
/* Enable only software interrupts */
irqrestore(CP0_STATUS_IM_SWINTS);
#endif
}
/****************************************************************************
* Name: up_disable_irq
*
* Description:
* Disable the IRQ specified by 'irq'
*
****************************************************************************/
void up_disable_irq(int irq)
{
uint32_t regaddr;
int bitno;
/* Disable the interrupt by clearing the associated bit in the IEC register */
DEBUGASSERT(irq >= PIC32MX_IRQSRC_FIRST && irq <= PIC32MX_IRQSRC_LAST)
if (irq >= PIC32MX_IRQSRC_FIRST)
{
if (irq <= PIC32MX_IRQSRC0_LAST)
{
/* Use IEC0 */
regaddr = PIC32MX_INT_IEC0CLR;
bitno = irq - PIC32MX_IRQSRC0_FIRST;
}
else if (irq <= PIC32MX_IRQSRC1_LAST)
{
/* Use IEC1 */
regaddr = PIC32MX_INT_IEC1CLR;
bitno = irq - PIC32MX_IRQSRC1_FIRST;
}
#ifdef PIC32MX_IRQSRC2_FIRST
else if (irq <= PIC32MX_IRQSRC2_LAST)
{
/* Use IEC2 */
regaddr = PIC32MX_INT_IEC2CLR;
bitno = irq - PIC32MX_IRQSRC2_FIRST;
}
#endif
else
{
/* Value out of range.. just ignore */
return;
}
/* Disable the interrupt */
putreg32((1 << bitno), regaddr);
}
}
/****************************************************************************
* Name: up_enable_irq
*
* Description:
* Enable the IRQ specified by 'irq'
*
****************************************************************************/
void up_enable_irq(int irq)
{
uint32_t regaddr;
int bitno;
/* Enable the interrupt by setting the associated bit in the IEC register */
DEBUGASSERT(irq >= PIC32MX_IRQSRC_FIRST && irq <= PIC32MX_IRQSRC_LAST)
if (irq >= PIC32MX_IRQSRC_FIRST)
{
if (irq <= PIC32MX_IRQSRC0_LAST)
{
/* Use IEC0 */
regaddr = PIC32MX_INT_IEC0SET;
bitno = irq - PIC32MX_IRQSRC0_FIRST;
}
else if (irq <= PIC32MX_IRQSRC1_LAST)
{
/* Use IEC1 */
regaddr = PIC32MX_INT_IEC1SET;
bitno = irq - PIC32MX_IRQSRC1_FIRST;
}
#ifdef PIC32MX_IRQSRC2_FIRST
else if (irq <= PIC32MX_IRQSRC2_LAST)
{
/* Use IEC2 */
regaddr = PIC32MX_INT_IEC2SET;
bitno = irq - PIC32MX_IRQSRC2_FIRST;
}
#endif
else
{
/* Value out of range.. just ignore */
return;
}
/* Disable the interrupt */
putreg32((1 << bitno), regaddr);
}
}
/****************************************************************************
* Name: up_pending_irq
*
* Description:
* Return true if the interrupt is pending and unmasked.
*
****************************************************************************/
bool up_pending_irq(int irq)
{
uint32_t ifsaddr;
uint32_t iecaddr;
uint32_t regval;
int bitno;
/* Disable the interrupt by clearing the associated bit in the IEC and then
* acknowledge the interrupt by clearing the associated bit in the IFS
* register. It is necessary to do this BEFORE lowering the interrupt
* priority level otherwise recursive interrupts would occur.
*/
DEBUGASSERT(irq >= PIC32MX_IRQSRC_FIRST && irq <= PIC32MX_IRQSRC_LAST)
if (irq >= PIC32MX_IRQSRC_FIRST)
{
if (irq <= PIC32MX_IRQSRC0_LAST)
{
/* Use IFS0 */
ifsaddr = PIC32MX_INT_IFS0;
iecaddr = PIC32MX_INT_IEC0;
bitno = irq - PIC32MX_IRQSRC0_FIRST;
}
else if (irq <= PIC32MX_IRQSRC1_LAST)
{
/* Use IFS1 */
ifsaddr = PIC32MX_INT_IFS1;
iecaddr = PIC32MX_INT_IEC1;
bitno = irq - PIC32MX_IRQSRC1_FIRST;
}
#ifdef PIC32MX_IRQSRC2_FIRST
else if (irq <= PIC32MX_IRQSRC2_LAST)
{
/* Use IFS2 */
ifsaddr = PIC32MX_INT_IFS2;
iecaddr = PIC32MX_INT_IEC2;
bitno = irq - PIC32MX_IRQSRC2_FIRST;
}
#endif
else
{
/* Value out of range.. just ignore */
return false;
}
/* Get the set of unmasked, pending interrupts. Return true if the
* interrupt is pending and unmask.
*/
regval = getreg32(ifsaddr) & getreg32(iecaddr);
return (regval & (1 << bitno)) != 0;
}
return false;
}
/****************************************************************************
* Name: up_clrpend_irq
*
* Description:
* Clear any pending interrupt
*
****************************************************************************/
void up_clrpend_irq(int irq)
{
uint32_t regaddr;
int bitno;
/* Acknowledge the interrupt by clearing the associated bit in the IFS
* register. It is necessary to do this BEFORE lowering the interrupt
* priority level otherwise recursive interrupts would occur.
*/
DEBUGASSERT(irq >= PIC32MX_IRQSRC_FIRST && irq <= PIC32MX_IRQSRC_LAST)
if (irq >= PIC32MX_IRQSRC_FIRST)
{
if (irq <= PIC32MX_IRQSRC0_LAST)
{
/* Use IFS0 */
regaddr = PIC32MX_INT_IFS0CLR;
bitno = irq - PIC32MX_IRQSRC0_FIRST;
}
else if (irq <= PIC32MX_IRQSRC1_LAST)
{
/* Use IFS1 */
regaddr = PIC32MX_INT_IFS1CLR;
bitno = irq - PIC32MX_IRQSRC1_FIRST;
}
#ifdef PIC32MX_IRQSRC2_FIRST
else if (irq <= PIC32MX_IRQSRC2_LAST)
{
/* Use IFS2 */
regaddr = PIC32MX_INT_IFS2CLR;
bitno = irq - PIC32MX_IRQSRC2_FIRST;
}
#endif
else
{
/* Value out of range.. just ignore */
return;
}
/* Disable then acknowledge interrupt */
putreg32((1 << bitno), regaddr);
}
}
/****************************************************************************
* Name: up_prioritize_irq
*
* Description:
* Set the priority of an IRQ by setting the priority and sub-priority
* fields in the PIC32MX IPC registers. There are 12 IPC registers, IPC0
* through IPC11. Each has sub-priority fields for 8 interrupts for a
* total of 96 interrupts max.
*
* Each interrupt priority is represent by a group of 5 bits: a 3-bit
* priority and a 2-bit sub-priority. These have different meanings to
* the hardware. The priority is the priority level that is enabled
* or masked by the IPL field of the CAUSE register. The sub-priority
* only mediates ties when two interrupts with the same priority pend
* simultaneously.
*
* In this function, we just treat this as a single 5-bit priority.
* (MS 3-bits=priority; LS 2-bits=sub-priority).
*
* The 5-bit priority/sub-priority fields are arranged at byte boundaries
* within each IPC register:
*
* xxxP PPSS xxxP PPSS xxxP PPSS xxxP PPSS
*
****************************************************************************/
#ifdef CONFIG_ARCH_IRQPRIO
int up_prioritize_irq(int irq, int priority)
{
int regndx;
int shift;
/* Don't allow this function to be used for disabling interrupts. There is
* no good reason for this restriction other than I want to make sure that
* the 5-bit priority values passed to this function are *not* confused with
* the 3-bit hardware priority values.
*/
DEBUGASSERT((unsigned)irq < NR_IRQS && (unsigned)(priority >> 2) > 0);
if (irq < NR_IRQS)
{
/* Get the index to the IPC register and the shift to the 5-bit priority
* field for this IRQ.
*/
regndx = irq >> 2; /* Range: 0-11 */
shift = (irq & 3) << 3; /* {0, 8, 16, 24 } */
/* Set the new interrupt priority (momentarily disabling interrupts) */
putreg32(0x1f << shift, PIC32MX_INT_IPCCLR(regndx));
putreg32(priority << shift, PIC32MX_INT_IPCSET(regndx));
return OK;
}
return -EINVAL;
}
#endif