|
|
/************************************************************************************
* configs/hymini-stm32v/src/hymini_stm32v-internal.h
* arch/arm/src/board/hymini_stm32v-internal.h
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
* Laurent Latil <laurent@latil.nom.fr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIGS_HYMINI_STM32V_INTERNAL_H
#define __CONFIGS_HYMINI_STM32V_INTERNAL_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
/************************************************************************************
* Definitions
************************************************************************************/
/* How many SPI modules does this chip support? The LM3S6918 supports 2 SPI
* modules (others may support more -- in such case, the following must be
* expanded).
*/
#if STM32_NSPI < 1
# undef CONFIG_STM32_SPI1
# undef CONFIG_STM32_SPI2
#elif STM32_NSPI < 2
# undef CONFIG_STM32_SPI2
#endif
/* GPIOs **************************************************************/
/* LEDs */
#define GPIO_LED1 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN0)
#define GPIO_LED2 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN1)
/* BUTTONS -- NOTE that some have EXTI interrupts configured */
#define MIN_IRQBUTTON BUTTON_KEYA
#define MAX_IRQBUTTON BUTTON_KEYB
#define NUM_IRQBUTTONS NUM_BUTTONS
/* Button A is externally pulled up */
#define GPIO_BTN_KEYA (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|\
GPIO_PORTC|GPIO_PIN13)
/* Button B is externally pulled dw */
#define GPIO_BTN_KEYB (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|\
GPIO_PORTB|GPIO_PIN2)
/* SPI touch screen (ADS7843) chip select: PA.4 */
#define GPIO_TS_CS (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4)
/* Touch screen (ADS7843) IRQ pin: PB.6 */
#define GPIO_TS_IRQ (GPIO_INPUT|GPIO_CNF_INPULLUP|GPIO_MODE_INPUT|\
GPIO_PORTB|GPIO_PIN6)
/* USB Soft Connect Pullup: PB.7 */
#define GPIO_USB_PULLUP (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN7)
/* SD card detect pin: PD.3 (line is pulled up on board) */
#define GPIO_SD_CD (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|\
GPIO_PORTD|GPIO_PIN3)
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public data
************************************************************************************/
#ifndef __ASSEMBLY__
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the Hy-Mini STM32v board.
*
************************************************************************************/
extern void weak_function stm32_spiinitialize(void);
/************************************************************************************
* Name: stm32_usbinitialize
*
* Description:
* Called to setup USB-related GPIO pins for the Hy-Mini STM32v board.
*
************************************************************************************/
extern void weak_function stm32_usbinitialize(void);
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_HYMINI_STM32V_INTERNAL_H */
|
