Rename all lpc313x to lpc31xx

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3644 42af7a65-404d-4744-a932-0658087f49c3

1 files changed, 119 insertions, 119 deletions

diff --git a/nuttx/configs/ea3131/src/up_boot.c b/nuttx/configs/ea3131/src/up_boot.c
index 59ed9e778..94c4d8a9c 100755
--- a/nuttx/configs/ea3131/src/up_boot.c
+++ b/nuttx/configs/ea3131/src/up_boot.c
@@ -1,119 +1,119 @@
-/************************************************************************************

- * configs/ea3131/src/up_boot.c

- * arch/arm/src/board/up_boot.c

- *

- *   Copyright (C) 2009 Gregory Nutt. All rights reserved.

- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>

- *

- * Redistribution and use in source and binary forms, with or without

- * modification, are permitted provided that the following conditions

- * are met:

- *

- * 1. Redistributions of source code must retain the above copyright

- *    notice, this list of conditions and the following disclaimer.

- * 2. Redistributions in binary form must reproduce the above copyright

- *    notice, this list of conditions and the following disclaimer in

- *    the documentation and/or other materials provided with the

- *    distribution.

- * 3. Neither the name NuttX nor the names of its contributors may be

- *    used to endorse or promote products derived from this software

- *    without specific prior written permission.

- *

- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED

- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

- * POSSIBILITY OF SUCH DAMAGE.

- *

- ************************************************************************************/

-

-/************************************************************************************

- * Included Files

- ************************************************************************************/

-

-#include <nuttx/config.h>

-

-#include <debug.h>

-

-#include <arch/board/board.h>

-

-#include "up_arch.h"

-#include "up_internal.h"

-#include "lpc313x_internal.h"

-#include "ea3131_internal.h"

-

-/************************************************************************************

- * Definitions

- ************************************************************************************/

-

-/************************************************************************************

- * Private Functions

- ************************************************************************************/

-

-/************************************************************************************

- * Public Functions

- ************************************************************************************/

-

-/************************************************************************************

- * Name: lpc313x_boardinitialize

- *

- * Description:

- *   All LPC313X architectures must provide the following entry point.  This entry

- *   point is called early in the intitialization -- after all memory has been

- *   configured and mapped but before any devices have been initialized.

- *

- ************************************************************************************/

-

-void lpc313x_boardinitialize(void)

-{

-  /* Initialize configured, external memory resources */

-

-#ifdef CONFIG_LPC313X_EXTSDRAM

-  lpc313x_meminitialize();

-#endif

-

-  /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function

-   * lpc313x_spiinitialize() has been brought into the link.

-   */

-

-#if defined(CONFIG_LPC313X_SPI)

-  if (lpc313x_spiinitialize)

-    {

-      lpc313x_spiinitialize();

-    }

-#endif

-

-   /* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not

-    * disabled, and 3) the weak function lpc313x_usbinitialize() has been brought

-    * into the build.

-    */

-

-#if defined(CONFIG_USBDEV) && defined(CONFIG_LPC313X_USB)

-  if (lpc313x_usbinitialize)

-    {

-      lpc313x_usbinitialize();

-    }

-#endif

-

-  /* Configure on-board LEDs if LED support has been selected. */

-

-#ifdef CONFIG_ARCH_LEDS

-  up_ledinit();

-#endif

-

-  /* Set up mass storage device to support on demand paging */

-

-#if defined(CONFIG_PAGING)

-  if (lpc313x_pginitialize)

-    {

-      lpc313x_pginitialize();

-    }

-#endif

-}

+/************************************************************************************
+ * configs/ea3131/src/up_boot.c
+ * arch/arm/src/board/up_boot.c
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "up_internal.h"
+#include "lpc31_internal.h"
+#include "ea3131_internal.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: lpc31_boardinitialize
+ *
+ * Description:
+ *   All LPC31XX architectures must provide the following entry point.  This entry
+ *   point is called early in the intitialization -- after all memory has been
+ *   configured and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+void lpc31_boardinitialize(void)
+{
+  /* Initialize configured, external memory resources */
+
+#ifdef CONFIG_LPC31XX_EXTSDRAM
+  lpc31_meminitialize();
+#endif
+
+  /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
+   * lpc31_spiinitialize() has been brought into the link.
+   */
+
+#if defined(CONFIG_LPC31XX_SPI)
+  if (lpc31_spiinitialize)
+    {
+      lpc31_spiinitialize();
+    }
+#endif
+
+   /* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not
+    * disabled, and 3) the weak function lpc31_usbinitialize() has been brought
+    * into the build.
+    */
+
+#if defined(CONFIG_USBDEV) && defined(CONFIG_LPC31XX_USB)
+  if (lpc31_usbinitialize)
+    {
+      lpc31_usbinitialize();
+    }
+#endif
+
+  /* Configure on-board LEDs if LED support has been selected. */
+
+#ifdef CONFIG_ARCH_LEDS
+  up_ledinit();
+#endif
+
+  /* Set up mass storage device to support on demand paging */
+
+#if defined(CONFIG_PAGING)
+  if (lpc31_pginitialize)
+    {
+      lpc31_pginitialize();
+    }
+#endif
+}